离子对内电子转移型染料阴离子-翁盐阳离子光敏体系中的溶剂效应和结构效应

本文研究了溶剂效应和结构效应对染料碘翁盐光物理, 光化学性质的影响。观察到在溶剂中离子对可以各种形式存在, 如紧密离子对、溶剂分隔离子对或溶剂化的自由离子, 溶剂的极性不仅影响各种存在形式的光谱性质, 而且影响它们之间的平衡关系, 进而影响离子对体系的物理化学性质。染料母核和碘翁阳离子的结构均对离子对体系的性质有影响。光诱导电子转移反应的热力学驱动力越大, 反应速度越快。用分子模拟技术(Molecular Modeling)对离子对体系的立体结构进行了研究, 为理解离子对体系的各种物理化学行为提供了重要的参考。     

离子对内电子转移型染料阴离子-翁盐阳离子光敏体系中的溶剂效应和结构效应

本文研究了溶剂效应和结构效应对染料碘翁盐光物理, 光化学性质的影响。观察到在溶剂中离子对可以各种形式存在, 如紧密离子对、溶剂分隔离子对或溶剂化的自由离子, 溶剂的极性不仅影响各种存在形式的光谱性质, 而且影响它们之间的平衡关系, 进而影响离子对体系的物理化学性质。染料母核和碘翁阳离子的结构均对离子对体系的性质有影响。光诱导电子转移反应的热力学驱动力越大, 反应速度越快。用分子模拟技术(Molecular Modeling)对离子对体系的立体结构进行了研究, 为理解离子对体系的各种物理化学行为提供了重要的参考。     

对高二学生掌握有机化学方程式的编码调查与教学启示

根据认知心理学对编码的定义,以及对编码在学习中的地位的认识,联系高中有机化学具体的教学实际,对学生学习与掌握有机化学方程式的编码方式进行调查,进行各个类型的学习效果检测并作相应的认知分析。联系认知心理学对编码的研究,对有机化学的教学提出一些教学建议。     

新解色谱现象

在客观分析色谱现象的基础上对色谱分离机理的传统解释提出了质疑和否定,并对色谱分离机理作出了新的解释。通过对色谱现象的研究和分析,不仅确定了一条流体运动的基本规律,还对固定相赋予了新的内涵,提出了能量场固定相的设想。由于对色谱分离原理进行了新的解释,因此对色谱现象提出了一个新的定义。     

活性炭负载丁二肟分离富集原子吸收法测定水中镍

通过对负载了丁二肟的活性炭对镍的吸附和富集行为的研究,确立了活性炭负载丁二肟和其对镍的吸附洗脱条件。建立了负载丁二肟活性炭对镍富集、分离,再用原子吸收测定的分析方法。方法的富集倍率为40倍。对地表水的测定结果令人满意。     

反相离子对色谱中离子对试剂浓度对保留值的影响

本文采用热力学与Gouy-chapmann理论相结合的方法, 考察了离子对试剂浓度对反相离子对色谱保留值的影响, 获得了反相离子对色谱ink'与离子对试剂浓度间的近似线性关系。同时考察了溶质疏水性和熔质电荷数对线性关系式中斜率和截距的影响。     

从理科师范生对科学本质的理解看当今的师范教育

近年来,国内外理科教育界非常重视对学生科学本质观的教育,我国的师范教育必须加强对科学教师进行科学本质观的养成教育。采用SUSSI量表对大学师范生进行考察,调查显示被调查者的科学本质观不容乐观。为此,结合实际对革新高等师范教育提出了一些建议。     

氨基化四氧化三铁磁性纳米粒子富集石墨炉原子吸收法检测苯胂酸

合成了磁性功能材料,氨基化的Fe3O4纳米粒子,以丙酮作溶剂对洛克沙胂、对氨基苯胂酸、对羟基苯胂酸、对硝基苯胂酸、对酰胺基苯胂酸进行吸附,石墨炉原子吸收光谱法进行检测。对合成的磁性材料进行了表征,并详细研究了其对苯胂酸的吸附性能。结果表明,合成的磁性材料对苯胂酸具有良好的选择性,5 min内便可吸附完全,吸附率接近100%。该方法在10～200 ng/mL范围内线性良好,检出限低于1 ng/mL,RSD均低于5.6%,将合成材料用于鸡饲料中5种苯胂酸的测定,加标回收率均在63%～104%之间。     

超疏水滤纸的制备与应用

对SiO2纳米粒子进行硅烷化改性,再将其修饰到滤纸上,制备出静态水接触角＞150°的超疏水滤纸,对制备条件进行了优化。 用热重分析及扫描电子显微镜对超疏水滤纸表征后发现,二氧化硅纳米粒子在滤纸纤维表面形成一层包裹层,即纳米级粗糙结构,这种结构对滤纸的疏水性具有关键作用。 对滤纸的油水分离性能进行了研究,发现其对非均相体系和高粘度油水混合物具有很好的分离效果。     

改性麦壳对水中苯酚的生物吸附作用

通过对农业副产物麦壳进行甲醛甲酸甲基化改性,研究了改性后麦壳对苯酚的吸附情况,讨论了吸附时间、吸附剂用量、初始浓度、温度及pH等条件对吸附效果的影响。结果表明,改性后的麦壳对苯酚的吸附反应迅速,随着吸附剂用量增加,吸附量增大;增大初始浓度,吸附量升高;升温对反应不利;酸性条件下有利于吸附。改性后的麦壳对苯酚的吸附符合Langmuir和Freundlich等温模型。改性麦壳可用于苯酚的去除。     

活性炭复合滤嘴吸附性能的热脱附研究

采用热脱附与气相色谱-质谱联用技术对活性炭滤嘴中活性炭和乙酸纤维脱附的组分进行了定性分析,并用峰面积归一化法测定了所含挥发性成分的质量分数,活性炭脱附组分共鉴定出芳香族化合物、醛酮类、烟碱、酸类、酯类等62种挥发性化合物.结果表明方法具有较好的重现性;为评价活性炭滤嘴的吸附性能提供了一种参考方法.     

宝明页岩柴油碱性氮化物的梯度富集及GC-MS分析

利用溶剂萃取和柱色谱等技术浓缩分离新疆宝明页岩油柴油馏分中的碱性氮化物。以宝明页岩柴油为原料,经糠醛溶剂精制,初步得到富集碱性氮化物的抽出油。以抽出油为深度富集碱性氮化物的原料,采用柱色谱等分离方法,从抽出油中分离得到碱性氮化物。利用傅立叶变换红外光谱仪(FT-IR)和气相色谱-质谱联用仪(GC-MS)分别对富集的碱性氮化物进行官能团检测和定性、定量分析。结果表明:新疆宝明页岩油柴油馏分中的碱性氮化物经溶剂精制和柱色谱等分离方法梯度富集后,碱性氮化物的质量分数由抽出油的12.08%提高到最终产物的69.48%,并在富集分离的产物中鉴定出60种碱性氮化物,其中主要为苯胺类、喹啉类和吡啶类化合物,各占25.85%,23.56%和16.52%。     

顶空固相微萃取-气相色谱-质谱法测定小米黄酒风味成分

为全面了解小米黄酒风味成分的构成和气味特征,优化了85μm聚丙烯酸酯(PA)、100μm聚二甲基硅氧烷(PDMS)、75μm碳分子筛(CAR)/PDMS、50/30μm二乙烯基苯(DVB)/CAR/PDMS萃取头提取小米黄酒风味成分的条件,采用顶空固相微萃取(headspace solid phase microextraction,HS-SPME)-气相色谱-质谱法(GC-MS)对风味成分进行定性、定量分析,并计算气味活性值(odor active value,OAV),同时利用OAV分析风味成分的气味特征和气味强度。结果显示:不同萃取头的最优萃取条件为样品量8 mL、萃取时间40 min、萃取温度60℃、NaCl添加量1.5 g。小米黄酒风味成分由醇、酯、含苯化合物、烃、酸、醛、酮、烯、酚和杂环类化合物构成,醇为主要风味成分。通过OAV确定了苯乙醇、苯乙烯、2-甲基萘、1-甲基萘、苯甲醛、苯乙醛、2-甲氧基-苯酚为小米黄酒气味特征成分,苯基乙醇、苯乙醛对气味贡献最大。PA和PDMS萃取头分别对极性和非极性化合物具有较好的吸附效果,CAR/PDMS和DVB/CAR/PDMS萃取头对中等极性化合物具有较好的吸附效果。该研究全面了解了小米黄酒风味成分的构成,为其产品开发及品质控制提供理论了依据。     

The identification of new ATAD2 bromodomain inhibitors: the application of combined ligand and structure-based virtual screening

Ligand-based virtual screening (LBVS) and structure-based virtual screening (SBVS) approaches were used to identify new inhibitors for ATAD2 bromodomain. The LBVS approach was used to search 23,129,083 clean compounds to identify compounds similar to an active compound with reported pIC₅₀ equal to 7.2. Based on LBVS results, 19 compounds were selected. To perform SBVS, by applying nine filters on 23,129,083 clean compounds, 1,057,060 compounds were selected. After performing SBVS on these selected compounds with idock software, 16 compounds with the lowest binding energies were selected. More accurate molecular docking analysis was performed on these 35 selected compounds by using iGEMDOCK software and six of them with the lowest binding energies were selected as hit compounds. These compounds were zinc36647229, zinc77969074, zinc13637358, zinc77971540, zinc12991296 and zinc19374204.     

催化柴油中氮化物分布的气相色谱-原子发射光谱分析方法的研究

建立了催化柴油馏分中各种氮化物类型分布的气相色谱-原子发射光谱(GC-AED)分析方法,考察了色谱条件和不同的试剂气压力对各种氮化物分离和检测灵敏度的影响,定性(或归类)了某典型催化柴油中的73个氮化物,计算了程升条件下各种氮化物的保留指数,为不同实验室的定性比较提供了依据。以峰面积对质量浓度作图,氮化物在2.0~600 mg/L浓度范围内,AED检测器对不同氮化物有良好的线性响应,线性相关系数达0.998。几种氮化物(吲哚、1-甲基吲哚、C2-吲哚、咔唑、1-甲基咔唑、1,8-二甲基咔唑)峰面积的相对标     

Gas chromatography-olfactometry analysis of the volatile compounds of two commercial Irish beef meats

The volatile flavour compounds of two commercial Irish beef meats (labelled as conventional and organic) were evaluated by gas chromatography-olfactometry and were identified by gas chromatography-mass spectrometry. The volatile compounds were isolated in a model mouth system. Gas chromatography-olfactometry was performed by a group of eight assessors using the detection frequency methodology. The odours of the detected compounds were described as well. Eighty-one volatile compounds were identified, 11 compounds of which possessed odour activity in the first beef sample and 14 of which in the second meat sample. Ten volatile flavour compounds were common to both: methanethiol, dimethyl sulphide, 2-butanone, ethyl acetate, 2- and 3-methylbutanal, an unknown compound, 2-octanone, decanal and benzothiazole. Two unknown compounds were only detected in the first sample while 2,3-pentanedione, 4-methyl-3-penten-2-one, 2-heptanone, dimethyl trisulphide and nonanal were only perceived in the second beef. Significant differences in terms of detection frequency, odour characteristics and in nature of the volatile flavour compounds were emphasised between the two samples.     

Synthesis of new bis(thiosemicarbazone) derivatives and DFT analysis of antioxidant characteristics in relation to HAT and SET reactions

A series of new bis(thiosemicarbazones) have been synthesized from terephthalaldehyde and various thiosemicarbazides. IR, ¹H NMR, ¹³C NMR spectroscopic methods, and elemental analysis were used to characterize the identification of the synthesized compounds. The in vitro antioxidant activity determinations were made using the 1,1-Diphenyl-2-Picryl Hydrazil (DPPH) method. The compounds exhibited very different inhibition activities with the change of groups attached to the bis(thiosemicarbazone) structure. The spectral and electronic properties of the compounds were investigated by DFT calculation. Intramolecular interactions were analyzed by QTAIM and IRI calculations. Intrinsic bond strength index values of the N–H bonds, Fukui indices and the local electron affinities of the compounds were calculated, and the relationships between the compounds and their antioxidant activity properties were investigated. The SET and HAT mechanisms in the reactions of the compounds with DPPH were affected by the concentration of the compounds, and the possible effects of the parameters supporting the dominant characteristics in these reactions were examined using theoretical data.     

2D-QSAR Studies on Triazolone Compounds Containing Benzenesulfonic Amide

The geometry structures of 6 triazolone compounds containing benzenesulfonic amide were fully optimized with DFT (Density Functional Theory) method at the B3LYP/6-31G level, and the structural and electronic parameters of the compounds were calculated. The hydrophobic and topological parameters of the title compounds were calculated by HyperChem software. The mono-and bi-parametric models between the parameters and biological activity of the compounds were analyzed by Multiple Linear Regression method based on Hansch-Fujita model. The results show that the activities of the title compounds were increased with higher hydrophobic property logP and molecular volume V, lower molecular energy ETOTAL and elec-tronegative of benzene ring Qph.     

Novel high birefringence bistolane liquid crystals with lateral fluorosubstituent

Twelve compounds based on lateral fluorinated bistolane moieties with cyano or trifluoromethyl terminal groups were synthesised with Hagihara–Sonogashira cross-coupling reaction. The molecular structures of the compounds were confirmed by Fourier transform infrared, ¹H-nuclear magnetic resonance and mass spectrometry. The transition temperatures, optical textures and optical anisotropies were determined by differential scanning calorimetry, polarizing optical microscopy and ultraviolet microscopy. The effects of the terminal substituents and lateral fluorosubstituent group on their physical properties were investigated and discussed. The compounds with lateral double fluorosubstituent and cyano terminal group exhibited nematogenic texture, while other compounds showed smectic phase. All the compounds exhibited wide liquid crystal temperature ranges and high clearing points. Interestingly, the compounds have the high birefringence in the range of between 0.480 and 0.633.     

Determination of the volatile composition in brown millet, milled millet and millet bran by gas chromatography/mass spectrometry

The volatile compounds from brown millet (BM), milled millet (MM) and millet bran (MB) were extracted using simultaneous distillation/extraction with a Likens-Nickerson apparatus. The extracts were analysed using gas chromatography coupled with mass spectrometry (GC-MS). A total of 65 volatile compounds were identified in all of the samples. Among these compounds, 51, 51 and 49 belonged to BM, MM and MB, respectively. Aldehydes and benzene derivatives were the most numerous among all of the compounds. Three compounds (hexanal, hexadecanoic acid and 2-methylnaphthalene) were dominant in the BM and MM materials. Eight compounds (hexanal, nonanal, (E)-2-nonenal, naphthalene, 2-methylnaphthalene, 1-methylnaphthalene, hexadecanoic acid and 2-pentylfuran) were dominant in the MB materials. Apart from the aromatic molecules, which were present in all fractions, compounds present only in BM, MM or MB were also identified.