Torsional postbuckling characteristics of functionally graded graphene enhanced laminated truncated conical shell with temperature dependent material properties

Buckling and postbuckling characteristics of laminated graphene-enhanced composite (GEC) truncated conical shells exposed to torsion under temperature conditions using finite element method (FEM) simulation are presented in this study. In the thickness direction, the GEC layers of the conical shell are ordered in a piece-wise arrangement of functionally graded (FG) distribution, with each layer containing a variable volume fraction for graphene reinforcement. To calculate the properties of temperature-dependent material of GEC layers, the extended Halpin-Tsai micromechanical framework is used. The FEM model is verified via comparing the current results obtained with the theoretical estimates for homogeneous, laminated cylindrical, and conical shells, the FEM model is validated. The computational results show that a piece-wise FG graphene volume fraction distribution can improve the torque of critical buckling and torsional postbuckling strength. Also, the geometric parameters have a critical impact on the stability of the conical shell. However, a temperature rise can reduce the crucial torsional buckling torque as well as the GEC laminated truncated conical shell's postbuckling strength.     

Non-linear dynamic analysis of symmetric and antisymmetric cross-ply laminated orthotropic thin shells

In this paper, the governing equations for non-linear free vibration of truncated, thin, laminated, orthotropic conical shells using the theory of large deformations with the Karman-Donnell-type of kinematic nonlinearity are derived. Applying superposition principle and Galerkin’s method, these equations are reduced to a time dependent non-linear differential equation. The frequency-amplitude relationship for the laminated orthotropic thin truncated conical shell is obtained using the method of weighted residuals. In the particular case, we can obtain the similar relationships for the single-layer and laminated orthotropic cylindrical shells, also. The influence played by geometrical parameters of the conical shell and physical parameters of the laminate (i.e. material properties, staking sequences and number of layers) on the non-linear vibration behavior of the conical shell is examined. It is noticed that the non-linear vibration of shells is highly dependent on laminate characteristics and, from these observations, it is concluded that specific configurations of laminates should be designed for each kind of application. Present results are compared with available data for special cases.     

Buckling and Postbuckling of Laminated Thin Cylindrical Shells under Hygrothermal Environments

ＩｎｔｒｏｄｕｃｔｉｏｎＩｎｒｅｃｅｎｔｙｅａｒｓ,ｆｉｂｅｒ＿ｒｅｉｎｆｏｒｃｅｄｃｏｍｐｏｓｉｔｅｌａｍｉｎａｔｅｄｓｈｅｌｌｓｔｒｕｃｔｕｒｅｓａｒｅｗｉｄｅｌｙｕｓｅｄｉｎｔｈｅａｅｒｏｓｐａｃｅ ,ｍａｒｉｎｅｉｎｄｕｓｔｒｙ ,ａｕｔｏｍｏｂｉｌｅｉｎｄｕｓｔｒｙａｎｄｏｔｈｅｒｅｎｇｉｎｅｅｒｉｎｇａｐｐｌｉｃａｔｉｏｎｓ.Ｄｕｒｉｎｇｔｈｅｏｐｅｒａｔｉｏｎａｌｌｉｆｅ ,ｔｈｅｖａｒｉａｎｃｅｏｆｔｅｍｐｅｒａｔｕｒｅａｎｄｍｏｉｓｔｕｒｅｒｅｄｕｃｅｓｔｈｅｅｌａｓｔｉｃｍｏｄｕｌｉ…     

Nonlinear thermo-elastic buckling characteristics of cross-ply laminated joined conical–cylindrical shells

Here, the nonlinear thermo-elastic buckling/post-buckling characteristics of laminated circular conical–cylindrical/conical–cylindrical–conical joined shells subjected to uniform temperature rise are studied employing semi-analytical finite element approach. The nonlinear governing equations, considering geometric nonlinearity based on von Karman’s assumption for moderately large deformation, are solved using Newton–Raphson iteration procedure coupled with displacement control method to trace the pre-buckling/post-buckling equilibrium path. The presence of asymmetric perturbation in the form of small magnitude load spatially proportional to the linear buckling mode shape is assumed to initiate the bifurcation of the shell deformation. The study is carried out to highlight the influences of semi-cone angle, material properties and number of circumferential waves on the nonlinear thermo-elastic response of the different joined shell systems.     

The vibration and buckling of laminated non-homogeneous orthotropic conical shells subjected to external pressure

In this paper, the free vibration and buckling of laminated homogeneous and non-homogeneous orthotropic truncated conical shells under lateral and hydrostatic pressures are studied. At first, the basic relations, the modified Donnell type dynamic stability and compatibility equations have been obtained for laminated orthotropic truncated conical shells, the Young's moduli and density of which vary piecewise continuously in the thickness direction. Applying superposition and Galerkin methods to the foregoing equations, the buckling pressures and dimensionless frequency parameter of laminated homogeneous and non-homogeneous orthotropic conical shells are obtained. The appropriate formulas for single-layer and laminated cylindrical shells made of homogeneous and non-homogeneous, orthotropic and isotropic materials are found as a special case. Finally, the effects of the number and ordering of layers, the variations of conical shell characteristics, together and separately variations of the Young's moduli and densities of the materials of layers on the critical lateral and hydrostatic pressures, and frequency parameter are found for different mode numbers. The results are compared with other works.     

Postbuckling analysis and imperfection sensitivity of general shells by the finite element method

Buckling and imperfection sensitivity are the primary considerations in analysis and design of thin shell structures. The objective here is to develop accurate and efficient capabilities to predict the postbuckling behavior of shells, including imperfection sensitivity. The approach used is based on the Lyapunov–Schmidt–Koiter (LSK) decomposition and asymptotic expansion in conjunction with the finite element method. This LSK formulation for shells is derived and implemented in a finite element code. The method is applied to cylindrical and spherical shells. Cases of linear and nonlinear prebuckling behavior, coincident as well as non-coincident buckling modes, and modal interactions are studied. The results from the asymptotic analysis are compared to exact solutions obtained by numerically tracking the bifurcated equilibrium branches. The accuracy of the LSK asymptotic technique, its range of validity, and its limitations are illustrated.     

Non-linear buckling behavior of FGM truncated conical shells subjected to axial load

In this study, the non-linear buckling behavior of truncated conical shells made of functionally graded materials (FGMs), subject to a uniform axial compressive load, has been investigated using the large deformation theory with von the Karman-Donnell-type of kinematic non-linearity. The material properties of functionally graded shells are assumed to vary continuously through the thickness of the shell. The variation of properties followed an arbitrary distribution in terms of the volume fractions of the constituents. The fundamental relations, the modified Donnell type non-linear stability and compatibility equations of functionally graded truncated conical shells are obtained and are solved by superposition and Galerkin methods and the upper and lower critical axial loads have been found analytically. Finally, the influences of the compositional profile variations and the variation of the shell geometry on the upper and lower critical axial loads are investigated. Comparing the results of this study with those in the literature validates the present analysis.     

安全壳中钢衬壳热屈曲问题理论与实验研究(I)———理论分析部分

钢衬壳热屈曲问题是核工程安全壳设计中的主要问题把铆固之间的钢衬壳视为钢衬板的特殊缺陷形式，利用Ｋｏｉｔｅｒ初始后屈曲理论分析了完善和具有初始缺陷钢衬壳的弹性热后屈曲性态给出了用挠度－温度载荷表示的钢衬壳的后屈曲平衡路径表达式和屈曲临界载荷表达式具体分析了三种钢衬壳模型：四点铆固钢衬壳、四边固支钢衬壳和五点铆固钢衬壳给出了钢衬的初始缺陷、锚钉间距、钢衬厚度等参数对钢衬热屈曲载荷的影响结果对安全壳中钢衬壳的设计有很好的参考价值     

Thermal buckling and postbuckling behavior of FG-GRC laminated cylindrical shells with temperature-dependent material properties

Thermal postbuckling analysis is presented for graphene-reinforced composite (GRC) laminated cylindrical shells under a uniform temperature field. The GRC layers are arranged in a functionally graded (FG) graphene reinforcement pattern by varying the graphene volume fraction in each GRC layer. The GRCs possess temperature dependent and anisotropic material properties and the extended Halpin–Tsai model is employed to evaluate the GRC material properties. The governing equations are based on a higher order shear deformation shell theory and include the von Kármán-type kinematic nonlinearity and the thermal effects. A singular perturbation method in conjunction with a two-step perturbation approach is applied to determine the thermal postbuckling equilibrium path for a GRC shell with or without geometric imperfection. An iterative scheme is developed to obtain numerical thermal buckling temperatures and thermal postbuckling load–deflection curves for the shells. The results reveal that the FG-X piece-wise FG graphene distribution can enhance the thermal postbuckling capacity of the shells when the shells are subjected to a uniform temperature loading.

     

Thermomechanical postbuckling of composite laminated cylindrical shells with local geometric imperfections

The effect of local geometric imperfections on the buckling and postbuckling of composite laminated cylindrical shells subjected to combined axial compression and uniform temperature loading was investigated. The two cases of compressive postbuckling of initially heated shells and of thermal postbuckling of initially compressed shells are considered. The formulations are based on a boundary layer theory of shell buckling, which includes the effects of the nonlinear prebuckling deformation, the nonlinear large deflection in the postbuckling range and the initial geometric imperfection of the shell. The analysis uses a singular perturbation technique to determine buckling loads and postbuckling equilibrium paths. Numerical examples are presented that relate to the performances of cross-ply laminated cylindrical shells with or without initial local imperfections, from which results for isotropic cylindrical shells follow as a limiting case. Typical results are presented in dimensionless graphical form for different parameters and loading conditions.     

Non-linear axisymmetric response of functionally graded shallow spherical shells under uniform external pressure including temperature effects

This paper presents an analytical approach to investigate the non-linear axisymmetric response of functionally graded shallow spherical shells subjected to uniform external pressure incorporating the effects of temperature. Material properties are assumed to be temperature-independent, and graded in the thickness direction according to a simple power law distribution in terms of the volume fractions of constituents. Equilibrium and compatibility equations for shallow spherical shells are derived by using the classical shell theory and specialized for axisymmetric deformation with both geometrical non-linearity and initial geometrical imperfection are taken into consideration. One-term deflection mode is assumed and explicit expressions of buckling loads and load-deflection curves are determined due to Galerkin method. Stability analysis for a clamped spherical shell shows the effects of material and geometric parameters, edge restraint and temperature conditions, and imperfection on the behavior of the shells.     

Stability of imperfect stiffened conical shells

A general procedure is developed for stability of stiffened conical shells. It is used for studying the sensitivity behavior with respect to the stiffener configurations. The effect of the pre-buckling nonlinearity on the bifurcation point, as well as the limit-point load level, is examined. The unique algorithm presented by the authors is an extended version of an earlier one, adapted for determination of the limit-point load level of imperfect conical shells. The eigenvalue problem is iteratively solved with respect to the nonlinear equilibrium state up to the bifurcation point or to the limit-point load level.A general symbolic code (using MAPLE) was programmed to create the differential operators based on Donnell’s type shell theory. Then the code uses the Galerkin procedure, the Newton–Raphson procedure, and a finite difference scheme for automatic development of an efficient FORTRAN code which is used for the parametric study.     

Experimental investigation of the buckling of shallow spherical shells

In the present paper, the buckling behavior of clamped thin shallow spherical shells under external pressure is studied. Seventy-nine plastic shells formed by thermovacuum process were tested. The distributions of initial geometrical imperfections and vertical displacements were minutely measured with a differential transformer. It was possible to control the symmetrical initial geometrical imperfection of each specimen.Results indicate that the buckling phenomena of shallow spherical shells vary greatly with the symmetrical initial imperfection parameter η. In the case of the geometrical parameter λ larger than 5.5, the amplitude of the asymmetrical displacement component with the bifurcation buckling wave calculated by Huang becomes large immediately before buckling. The validity of Huang's theory for an initially perfect shell is experimentally demonstrated.     

On the vibration of laminated nonhomogeneous orthotropic shells

In this paper, an analytical procedure is given to study the free vibration of the laminated homogeneous and non-homogeneous orthotropic conical shells with freely supported edges. The basic relations, the modified Donnell type motion and compatibility equations have been derived for laminated orthotropic truncated conical shells with variable Young’s moduli and densities in the thickness direction of the layers. By applying the Galerkin method, to the basic equations, the expressions for the dimensionless frequency parameter of the laminated homogeneous and non-homogeneous orthotropic truncated conical shells are obtained. The appropriate formulas for the single-layer and laminated complete conical and cylindrical shells made of homogeneous and non-homogeneous, orthotropic and isotropic materials are found as a special case. Finally, the influences of the non-homogeneity, the number and ordering of layers and the variations of the conical shell characteristics on the dimensionless frequency parameter are investigated. The results obtained for homogeneous cases are compared with their counterparts in the literature.     

Dynamic thermal buckling of suddenly heated temperature-dependent FGM cylindrical shells,under combined axial compression and external pressure

FGM components are constructed to sustain high temperature gradients. There are many applications where the FGM components are vulnerable to transient thermal shocks. If a component is already under compressive external loads (e.g. under a combination of axial compression and external pressure), the mentioned thermal shocks will cause the component to exhibit dynamic behavior and in some cases may lead to buckling. On the other hand, a preheated FGM component may undergo dynamic mechanical loads. Only static thermal buckling investigations were developed so far for the FGM shells. In the present paper, dynamic buckling of a pre-stressed, suddenly heated imperfect FGM cylindrical shell and dynamic buckling of a mechanically loaded imperfect FGM cylindrical shell in thermal environment, with temperature-dependent properties are presented. The general form of Green’s strain tensor in curvilinear coordinates and a high order shell theory proposed already by the author are used. Instead of using semi-analytical solutions that rely on the validity of the separation of variables concept, the complicated nonlinear governing equations are solved using the finite element method. Buckling load is detected by a modified Budiansky criterion proposed by the author. The effects of temperature-dependency of the material properties, volume fraction index, load combination, and initial geometric imperfections on the thermo-mechanical post-buckling behavior of a shell with two constituent materials are evaluated. The results reveal that the volume fraction index and especially, the differences between the thermal stresses created in the outer and the inner surfaces may change the buckling behavior. Furthermore, temperature gradient and initial imperfections have less effect on buckling of a shell subjected to a pure external pressure.     

Postbuckling of FGM cylindrical shells under combined axial and radial mechanical loads in thermal environments

A postbuckling analysis is presented for a shear deformable functionally graded cylindrical shell of finite length subjected to combined axial and radial loads in thermal environments. Heat conduction and temperature-dependent material properties are both taken into account. The temperature field considered is assumed to be a uniform distribution over the shell surface and varied in the thickness direction only. Material properties are assumed to be temperature-dependent, and graded in the thickness direction according to a simple power law distribution in terms of the volume fractions of the constituents. The formulations are based on a higher order shear deformation shell theory with von Kármán–Donnell-type of kinematic nonlinearity. A boundary layer theory of shell buckling, which includes the effects of nonlinear prebuckling deformations, large deflections in the postbuckling range, and initial geometric imperfections of the shell, is extended to the case of functionally graded cylindrical shells. A singular perturbation technique is employed to determine the interactive buckling loads and postbuckling equilibrium paths. The numerical illustrations concern the postbuckling response of perfect and imperfect cylindrical shells with two constituent materials subjected to combined axial and radial mechanical loads and under different sets of thermal environments. The results reveal that the temperature field and volume fraction distribution have a significant effect on the postbuckling behavior, but they have a small effect on the imperfection sensitivity of the functionally graded shell.     

Free vibration and critical speed of moderately thick rotating laminated composite conical shell using generalized differential quadrature method

The generalized differential quadrature method (GDQM) is employed to consider the free vibration and critical speed of moderately thick rotating laminated composite conical shells with different boundary conditions developed from the first-order shear deformation theory (FSDT). The equations of motion are obtained applying Hamilton’s concept, which contain the influence of the centrifugal force, the Coriolis acceleration, and the preliminary hoop stress. In addition, the axial load is applied to the conical shell as a ratio of the global critical buckling load. The governing partial differential equations are given in the expressions of five components of displacement related to the points lying on the reference surface of the shell. Afterward, the governing differential equations are converted into a group of algebraic equations by using the GDQM. The outcomes are achieved considering the effects of stacking sequences, thickness of the shell, rotating velocities, half-vertex cone angle, and boundary conditions. Furthermore, the outcomes indicate that the rate of the convergence of frequencies is swift, and the numerical technique is superior stable. Three comparisons between the selected outcomes and those of other research are accomplished, and excellent agreement is achieved.     

Three-dimensional free vibration analysis of rotating laminated conical shells: layerwise differential quadrature (LW-DQ) method

This paper focuses on the free vibration analysis of thick, rotating laminated composite conical shells with different boundary conditions based on the three-dimensional theory, using the layerwise differential quadrature method (LW-DQM). The equations of motion are derived applying the Hamilton’s principle. In order to accurately account for the thickness effects, the layerwise theory is used to discretize the equations of motion and the related boundary conditions through the thickness of the shells. Then, the equations of motion as well as the boundary condition equations are transformed into a set of algebraic equation applying the DQM in the meridional direction. This study demonstrates the applicability, accuracy, stability and the fast rate of convergence of the present method, for free vibration analyses of rotating thick laminated conical shells. The presented results are compared with those of other shell theories obtained using conventional methods and a special case where the angle of the conical shell approaches zero, that is, a cylindrical shell and excellent agreements are achieved.     

Torsional buckling and postbuckling of FGM cylindrical shells in thermal environments

A postbuckling analysis is presented for a functionally graded cylindrical shell subjected to torsion in thermal environments. Heat conduction and temperature-dependent material properties are both taken into account. The temperature field considered is assumed to be a uniform distribution over the shell surface and varied in the thickness direction. The material properties of functionally graded materials (FGMs) are assumed to be graded in the thickness direction according to a simple power law distribution in terms of the volume fractions of the constituents, and are assumed to be temperature-dependent. The governing equations are based on a higher order shear deformation theory with a von Kármán–Donnell-type of kinematic non-linearity. The non-linear prebuckling deformations and initial geometric imperfections of the shell are both taken into account. A singular perturbation technique is employed to determine the buckling load and postbuckling equilibrium paths. The numerical illustrations concern the postbuckling behavior of twist, perfect and imperfect, FGM cylindrical shells under different sets of thermal fields. The results reveal that the volume fraction distribution of FGMs has a significant effect on the buckling load and postbuckling behavior of FGM cylindrical shells subjected to torsion. They also confirm that the torsional postbuckling equilibrium path is weakly unstable and the shell structure is virtually imperfection–insensitive.