Discussion on electromagnetic crack face boundary conditions for the fracture mechanics of magneto-electro-elastic materials

This paper discusses electromagnetic boundary conditions on crack faces in magneto- electroelastic materials, where piezoelectric, piezomagnetic and magnetoelectric effects are coupled. A notch of finite thickness in these materials is also addressed. Four idealized electromagnetic boundary conditions assumed for the crack-faces are separately investigated, i.e. (a) electrically and magnetically impermeable (crack-face), (b) electrically impermeable and magnetically permeable, (c) electrically permeable and magnetically impermeable, and (d) electrically and magnetically permeable. The influence of the notch thickness on important parameters, such as the field intensity factors, the energy release rate at the notch tips and the electromagnetic fields inside the notch, are studied and the results are obtained in closed-form. Results under different idealized electromagnetic boundary conditions on the crack-face are compared, and the applicability of these idealized assumptions is discussed.The project supported by the National Natural Science Foundation of China (10102004) The English text was polished by Yunming Chen.     

Transient response of an interfacial crack between dissimilar magnetoelectroelastic layers under magnetoelectromechanical impact loadings: Mode-I problem

The dynamic response of an interfacial crack between two dissimilar magnetoelectroelastic layers is investigated under magnetic, electrical and mechanical impact loadings. Four kinds of ideal crack-face assumptions, i.e., magnetoelectrically impermeable (Case 1), magnetically impermeable and electrically permeable (Case 2), magnetically permeable and electrically impermeable (Case 3) and magnetoelectrically permeable (Case 4), are adopted separately. The dynamic field intensity factors and energy release rates are derived. The effects of loading combinations and crack configurations especially for the former on the dynamic response are examined according to energy release rate criterion. The numerical results show that, among others, a negative magnetic (or electrical) loading is generally prone to inhibit the crack extension rather than a positive one for a magnetically (or electrically) impermeable interfacial crack. Results presented in this paper should have potential applications to the design of multilayered magnetoelectroelastic structures.     

Dynamic analysis of a penny-shaped dielectric crack in a magnetoelectroelastic solid under impacts

The transient response of a magneto-electro-elastic material with a penny-shaped dielectric crack subjected to in-plane magneto-electro-mechanical impacts is made. To simulate an opening crack with a dielectric interior, the crack-face electromagnetic boundary conditions are supposed to depend on the crack opening displacement and the jumps of electric and magnetic potentials across the crack. Four ideal crack-face electromagnetic boundary conditions involving a combination of electrically permeable or impermeable and magnetically permeable or impermeable assumptions can be reduced. The Laplace and Hankel transform techniques are further utilized to solve the mixed initial-boundary-value problem. Three coupling Fredholm integral equations are obtained and solved by the composite Simpson's rule. Dynamic field intensity factors of stress, electric displacement, magnetic induction, crack opening displacement (COD), electric potential and magnetic potential are given in the Laplace transform domain. By means of a numerical inversion of the Laplace transform, numerical results are calculated to show the variations of the physical parameters of concern versus the normalized time in graphics. The effects of applied electric and magnetic loads on the dynamic intensity factors of stress and COD, and the dynamic energy release rate for a BaTiO₃-CoFe₂O₄ composite with a penny-shaped vacuum crack are discussed in detail.     

压电材料中裂纹面电边界条件的适用性

先分析理想裂纹面电边界条件(包括导通型裂纹和不导通型裂纹),然后分析缺陷的厚度及其对尖端场的影响,用封闭形式的解表示出了缺陷厚度的影响．结果指出,裂纹长厚比对计算结果是有影响的,除非裂纹极扁,不可通裂纹边界条件可以给出合理的结果,而可通边界条件只有在一些限制条件下才适用。     

Transient response of a magnetoelectroelastic solid with two collinear dielectric cracks under impacts

Dynamic analysis of two collinear electro-magnetically dielectric cracks in a piezoelectromagnetic material is made under in-plane magneto-electro-mechanical impacts. Generalized semi-permeable crack-face boundary conditions are proposed to simulate realistic opening cracks with dielectric. Ideal boundary conditions of a combination of electrically permeable or impermeable and magnetically permeable or impermeable assumptions are several limiting cases of the semi-permeable dielectric crack. Utilizing the Laplace and Fourier transforms, the mixed initial-boundary-value problem is reduced to solving singular integral equations with Cauchy kernel. Dynamic intensity factors of stress, electric displacement, magnetic induction and crack opening displacement (COD) near the inner and outer crack tips are determined in the Laplace transform domain. Numerical results for a special magnetoelectroelastic solid are calculated to show the influences of the dielectric permittivity and magnetic permeability inside the cracks on the crack-face electric displacement and magnetic induction. By means of a numerical inversion of the Laplace transform, the variations of the normalized intensity factors of stress and COD are discussed against applied magnetoelectric impact loadings and the geometry of the cracks for fully impermeable, vacuum, fully permeable cracks and shown in graphics.     

APPLICABILITY OF THE CRACK FACE ELECTRICAL BOUNDARY CONDITIONS IN PIEZOELECTRIC MECHANICS

The electrical boundary conditions on the crack faces and their applicability in piezoelectric materials are discussed. A slit crack and a notch of ?nite thickness in piezoelectric materials subjected to combined mechanical and electrical loads is consi…     

Analysis method of planar cracks of arbitrary shape in the isotropic plane of a three-dimensional transversely isotropic magnetoelectroelastic medium

The hyper-singular boundary integral equation method of crack analysis in three-dimensional transversely isotropic magnetoelectroelastic media is proposed. Based on the fundamental solutions or Green’s functions of three-dimensional transversely isotropic magnetoelectroelastic media and the corresponding Somigliana identity, the boundary integral equations for a planar crack of arbitrary shape in the plane of isotropy are obtained in terms of the extended displacement discontinuities across crack faces. The extended displacement discontinuities include the displacement discontinuities, the electric potential discontinuity and the magnetic potential discontinuity, and correspondingly the extended tractions on crack face represent the conventional tractions, the electric displacement and the magnetic induction boundary values. The near crack tip fields and the intensity factors in terms of the extended displacement discontinuities are derived by boundary integral equation approach. A solution method is proposed by use of the analogy between the boundary integral equations of the magnetoelectroelastic media and the purely elastic materials. The influence of different electric and magnetic boundary conditions, i.e., electrically and magnetically impermeable and permeable conditions, electrically impermeable and magnetically permeable condition, and electrically permeable and magnetically impermeable condition, on the solutions is studied. The crack opening model is proposed to consider the real crack opening and the electric and magnetic fields in the crack cavity under combined mechanical-electric-magnetic loadings. An iteration approach is presented for the solution of the non-linear model. The exact solution is obtained for the case of uniformly applied loadings on the crack faces. Numerical results for a square crack under different electric and magnetic boundary conditions are displayed to demonstrate the proposed method.     

A periodic array of cracks in a transversely isotropic magnetoelectroelastic material

Magnetoelectroelastic materials are inherently brittle and prone to fracture. Therefore, it is important to evaluate the fracture behavior of these advanced materials. In this paper, a periodic array of cracks in a transversely isotropic magnetoelectroelastic material is investigated. Hankel transform is applied to solve elastic displacements, electric potential and magnetic potential. The problem is reduced into a system of integral equations. Both impermeable and permeable crack-face electromagnetic boundary conditions assumptions are investigated. Quantities of the stress, electric displacement and magnetic induction and their intensity factor are obtained. Effect of the crack spacing on these quantities is investigated in details.     

Applicability of the crack faces thermoelectric boundary conditions for thermopiezoelectric materials

The applicability and effect of the crack surfaces thermoelectric boundary conditions in thermopiezoelectric fracture mechanics problem are discussed by using the finite thickness notch approach. The stress and electric displacement intensity factors at the notch tips, and thermal flux and electric displacement inside the notch are derived in closed-form. The numerical results are compared with the ideal crack solutions. It is found that the electrically impermeable crack boundary condition assumption is reasonable if the flaw in the material is a notch with finite width, and the thermal conductivity of air or vacuum inside the crack must be considered.     

Unified electrical boundary conditions for a crack interacting with a dislocation in piezoelectric media

This paper investigates the interaction problem between a dislocation and a finite crack in piezoelectric media. Analytical solutions for the generalized two-dimensional problem of a dislocation that is interacting with a finite crack in piezoelectric media are formulated via Stroh formalism. The analysis is conducted on the unified electrical crack boundary condition with the introduction of the electric crack condition parameter that can describe all the electric crack boundary conditions. The two ideal crack boundary conditions, namely, the electrically impermeable and permeable crack assumptions are obtained as two special cases for the current solutions. Based on the complex variable method and the perturbation technique, closed form solutions are obtained. The field intensity factors at the crack tip and the image forces on the dislocation due to the crack are computed and discussed.     

A dielectric crack in a functionally graded piezoelectric layer

Considering the dielectric effects inside a crack, the problem of an electrically dielectric crack in a functionally graded piezoelectric layer is addressed in this paper. The energetically consistent crack-face boundary conditions are utilized to analyze the effects of a dielectric of crack interior. Applying the Fourier transform technique, the boundary-value problem is reduced to solving three coupling singular equations. Then a system of non-linear algebraic equations is obtained and the field intensity factors along with the energy release rate are given. Numerical results show the differences of the electric displacement inside a crack, the stress and electric displacement intensity factors and the energy release rate using the permeable, impermeable, semi-permeable and energetically consistent boundary conditions respectively. The effects of the material non-homogeneity, the applied electric field and the discharge field of crack interior on the electrostatic traction acting on the crack faces and the energy release rate are further studied through the energetically consistent boundary conditions.     

Nonlinear behaviour of interacting dielectric cracks in piezoelectric materials

Existing studies on the fracture of cracked piezoelectric materials have been limited mostly to the electrically impermeable and permeable crack models, which represent the limiting cases of the physical boundary condition along the crack surfaces. This paper presents a study on the electromechanical behaviour of interacting dielectric cracks in piezoelectric materials. The cracks are filled with dielectric media and, as the result, the electric boundary condition along the crack surfaces is governed by the opening displacement of the cracks. The formulation of this nonlinear problem is based on simulating the cracks using distributed dislocations and solving the resulting nonlinear singular integral equations. Multiple deformation modes are observed. A solution technique is developed to determine the desired deformation mode of the interacting cracks. Numerical results are given to show the effect of the interaction between parallel cracks. Attention is paid to the transition between permeable and impermeable models with increasing crack opening.     

A magnetoelectroelastic medium with an elliptical cavity under combined mechanical–electric–magnetic loading

The solution for an elliptical cavity in an infinite two-dimensional magnetoelectroelastic medium subject to remotely uniformly applied combined mechanical–electric–magnetic loadings is obtained by using the Stroh formalism and the exact boundary conditions along the surface of the cavity. By letting the minor-axis of the cavity to zero the solution for a crack is deduced. A self-consistent method is proposed to calculate the real crack opening under the combined mechanical–electric–magnetic loadings. The method requires that the crack opening is the minor-axis of the elliptical opening profile. Beside the real crack solution, four different extreme models, i.e., the impermeable crack, permeable crack, electrically impermeable and magnetically permeable crack and electrically permeable and magnetically impermeable crack, are discussed. An expression of the strain energy density factor is derived. Numerical results of the strain energy density at the crack tip are given for a BaTiO₃–CoFe₂O₄ composite with the piezoelectric BaTiO₃ material being the inclusion and the magnetostrictive CoFe₂O₄ material being the matrix. The effects of the proportion of the two phases, permeability of the crack to electric and magnetic fields, the electric and magnetic loadings on the strain energy density factor are discussed.     

Fracture analysis of mode III crack problems for the piezoelectric bimorph

In this paper, a symplectic method based on the Hamiltonian system is proposed to analyze the interfacial fracture in the piezoelectric bimorph under anti-plane deformation. A set of Hamiltonian governing equations is derived from the Hamiltonian function by introducing dual variables of generalized displacements and stresses which can be expanded in series in terms of the symplectic eigensolutions. With the aid of the adjoint symplectic orthogonality, coefficients of the series are determined by the boundary conditions along the crack faces and along the external geometry. The stress\electric displacement intensity factors and energy release rates (G) directly relate to the first few terms of the nonzero eigenvalue solutions. The two ideal crack boundary conditions, namely the electrically impermeable and permeable crack assumptions, are considered. Numerical examples including the complex mixed boundary conditions are considered to show fracture behaviors of the interface crack and discuss the influencing factors.     

压电压磁复合材料中正六边形孔边裂纹的反平面断裂问题

基于线性磁电弹性理论,利用Schwarz-Christoffel(CS)变换技术和Stroth公式,首次系统研究了压电压磁复合材料中含带两个不对称裂纹的正六边形孔口问题在部分渗透磁电边界条件下的解析解.当忽略磁场时,磁电非渗透裂纹和磁电渗透裂纹两种极端情况下的解析解答可退化为文献已有研究结果.数值结果揭示了正六边形孔口尺寸、裂纹长度以及力电载荷和磁载荷对能量释放率的影响规律.研究结果表明：减小孔口边长和裂纹长度可以提高材料的可靠性;机械载荷总是促进裂纹扩展;在磁电非渗透和磁电部分渗透边界条件下,负电场和负磁场会延缓裂纹的扩展,而正电场可以增强或阻碍裂纹的扩展,这取决于所施加的电场和磁场的强度以及机械载荷的水平;在磁电渗透边界条件下,电场和磁场对裂纹的扩展没有影响.     

The effective electroelastic property of piezoelectric media with parallel dielectric cracks

Existing studies on the coupled electroelastic behaviour of cracked piezoelectric media have been based mostly on the electrically impermeable and permeable crack models. The current paper presents a study of the effective electroelastic property of piezoelectric media weakened by parallel cracks using a dielectric crack model with the electric boundary condition along the crack surfaces being governed by the opening displacement. The theoretical formulation is obtained using the dilute model of distributed cracks and the solution of a single dielectric crack problem. It is observed that the effective electroelastic property of cracked piezoelectric media is nonlinear and sensitive to loading conditions. Different modes of crack deformation are predicted and discussed. Attention is paid to the transition between electrically permeable and impermeable crack models.     

PZT-4紧凑拉伸试样的断裂分析

基于线性压电材料的复势理论,通过解析分析,导出了一种分析有限压电板裂纹问题的解析数值方法. 首先,计算了含中心裂纹有限板的断裂参数,与Woo和Wang的解析数值法(Int J Fract, 1993, 62: 203$\sim$218)相比较,表明该方法具有很高的精度和很好的计算效率. 随后,采用该方法和有限元法计算了PZT-4紧凑拉伸试样在绝缘裂纹面边界条件下断裂时的断裂参数,发现各断裂参数的临界值分散性很大,不能作为压电材料的单参数断裂准则. 进而,针对试样真实的裂隙形状,采用有限元法计算了裂隙尖端的应力、电位移场,比较了裂隙内介质的介电性能对裂隙尖端场的影响,计算了带微裂纹的真实裂隙模型的断裂参数并进行了理论分析.      

Theoretical model of crack branching in magnetoelectric thermoelastic materials

Thermomagnetoelectroelastic crack branching of magnetoelectro thermoelastic materials is theoretically investigated based on Stroh formalism and continuous distribution of dislocation approach. The crack face boundary condition is assumed to be fully thermally, electrically and magnetically impermeable. Explicit Green’s functions for the interaction of a crack and a thermomagnetoelectroelastic dislocation (i.e., a thermal dislocation, a mechanical dislocation, an electric dipole and a magnetic dipole located at a same point) are presented. The problem is reduced to two sets of coupled singular integral equations with the thermal dislocation and magnetoelectroelastic dislocation densities along the branched crack line as the unknown variables. As a result, the formulations for the stress, electric displacement and magnetic induction intensity factors and energy release rate at the branched crack tip are expressed in terms of the dislocation density functions and the branch angle. Numerical results are presented to study the effect of applied thermal flux, electric field and magnetic field on the crack propagation path by using the maximum energy release rate criterion.     

Strip electric-magnetic breakdown model in a magnetoelectroelastic medium

Extending the polarization saturation model [Gao et al., 1997. Local and global energy release rates for an electrically yielded crack in a piezoelectric ceramic. J. Mech. Phys. Solids 45, 491-510] and the dielectric breakdown (DB) model [Zhang et al., 2005. The strip dielectric breakdown model. Int. J. Fract. 132, 311-327] in piezoelectric materials, the Strip Electric-Magnetic Breakdown (SEMB) model is proposed for electrically and magnetically impermeable crack in a magnetoelectroelastic medium to study the effect of the nonlinear character of electric field and magnetic field on fracture of magnetoelectroelastic materials. In the SEMB model, the electric field in the strip of the electric breakdown zone ahead of the crack tip is equal to the electric breakdown strength, while the magnetic filed in the strip of the magnetic breakdown zone is equal to the magnetic breakdown strength. By using the extended Stroh formalism and the extended dislocation modeling of a crack, the Griffith crack problem under the electrically and magnetically elastic-plastic condition in a magnetoelectroelastic medium is reduced to a set of dual integral equations. The sizes of the electric breakdown zone and the magnetic breakdown zone, the extended intensity factors and the local J-integral are obtained. The effect of the combined mechanical-electric-magnetic loadings on the local J-integral is studied.     

PHASE FIELD SIMULATION OF DOMAIN SWITCHING IN FERROELECTRIC SINGLE CRYSTAL WITH ELECTRICALLY PERMEABLE AND IMPERMEABLE CRACKS

Domain switching around electrically permeable and impermeable cracks in ferroelectric single crystals subjected to a mechanical load is investigated by using a phase field model.It is found that the e...