Pressure-sensitive ductile layers – II. 3D models of extensive damage

The mechanisms of void growth and coalescence in ductile polymeric layers, taking into account the effects of pressure-sensitivity, α, and plastic dilatancy, β, are explored in this two-part paper. In Part I, a two-dimensional model containing discrete cylindrical voids was used to simulate void growth and coalescence ahead of a crack. This paper extends the previous work by explicitly modeling initially spherical voids in a three-dimensional configuration. Damage predictions from the present 3D model for low yield strain adhesives are found to be in good agreement with both the 2D model in Part I and the computational cell element model. Significant discrepancies in the damage predictions, however, exist among all three models for high yield strain adhesives (e.g. polymers). The present 3D study also discusses the increasing damage level and its spatial extent with pressure-sensitivity, as well as the exacerbation of these effects arising from the deviation from an associated flow rule. In fact, both high porosity and high pressure-sensitivity promote void interaction. In addition, pressure-sensitivity increases the oblacity of the voids and reduces the intervoid ligament spacing over a wide range of load levels. These effects are compounded as the fracture process zone thickness decreases relative to the adhesive thickness. Results further show that both the adhesive toughness levels and the critical porosity governing the onset of void coalescence are significantly lowered with increasing pressure-sensitivity.     

Effects of pressure-sensitivity and plastic dilatancy on void growth and interaction

Hydrostatic stress can affect the non-elastic deformation and flow stress of polymeric materials and certain metallic alloys. This sensitivity to hydrostatic stress can also influence the fracture toughness of ductile materials, which fail by void growth and coalescence. These materials typically contain a non-uniform distribution of voids of varying size-scales and void shapes. In this work, the effects of void shape and microvoid interaction in pressure-sensitive materials are examined via a two-prong approach: (i) an axisymmetric unit-cell containing a single ellipsoidal void and (ii) a plane-strain unit-cell consisting of a single large void and a population of discrete microvoids. The representative material volume in both cases is subjected to physical stress states similar to highly stressed regions ahead of a crack. Results show that oblate voids and microvoid cavitation can severely reduce the critical stress of the material. These effects can be compounded under high levels of pressure-sensitivity. In some cases, the critical stress responsible for rapid void growth is reduced to levels comparable to the yield strength of the material. The contribution of void shape and pressure-sensitivity to the thermal- and moisture-induced voiding phenomenon in IC packages is also discussed.     

Pressure-sensitive ductile layers – I. Modeling the growth of extensive damage

Polymeric adhesives sandwiched between two elastic substrates are commonly found in multi-layers and IC packages. The non-elastic deformation and flow stress of such adhesive joints are highly pressure-sensitive. In this work, we study the effects of pressure-sensitivity, α, and plastic dilatancy, β, on void growth and coalescence ahead of a crack in ductile adhesive joints. To this end, a single layer of discrete voids is placed ahead of the crack in a pressure-sensitive dilatant adhesive sandwiched between two elastic substrates. The adhesive joint is subjected to small-scale yielding conditions. Using an associated flow rule (α = β), we show that pressure-sensitivity not only intensifies damage levels but also increases its spatial extent several fold. The damage level as well as its spatial extent is found to be even greater when a non-associated flow rule (β < α) is deployed. A reduction in the damage process zone’s thickness further increases the voiding activity in the adhesive, thereby resulting in brittle-like failure. This work also examines the fracture toughness trends using a material failure criterion for crack growth.     

Effect of crack-tip shape on the near-tip field in glassy polymer

The physical nature of a crack tip is not absolutely sharp but blunt with finite curvature. In this paper, the effects of crack-tip shape on the stress and deformation fields ahead of blunted cracks in glassy polymers are numerically investigated under Mode I loading and small scale yielding conditions. An elastic–viscoplastic constitutive model accounting for the strain softening upon yield and then the subsequently strain hardening is adopted and two typical glassy polymers, one with strain hardening and the other with strain softening–rehardening are considered in analysis. It is shown that the profile of crack tip has obvious effect on the near-tip plastic field. The size of near-tip plastic zone reduces with the increase of curvature radius of crack tip, while the plastic strain rate and the stresses near crack tip enhance obviously for two typical polymers. Also, the plastic energy dissipation behavior near cracks with different curvatures is discussed for both materials.     

压力敏感材料中的空洞长大研究及其在页岩及高分子材料中的应用

主要研究压力敏感材料中含内压的空洞长大,如页岩或者高分子材料。采用数值方法研究含内压空洞的对称和非对称球形和柱形胞元的宏观力学行为。结果表明,压力敏感性及其空洞内压将极大影响空洞的形核与长大。在球形胞元情形中未出现柱形胞元的单轴拉伸现象。将胞元有限变形的数值计算结果与基于近期提出的考虑压力敏感材料中空洞长大的塑形力学模型的分析结果进行了对比。     

Two mechanisms of ductile fracture: void by void growth versus multiple void interaction

Two distinct mechanisms of crack initiation and advance by void growth have been identified in the literature on the mechanics of ductile fracture. One is the interaction a single void with the crack tip characterizing initiation and the subsequent void by void advance of the tip. This mechanism is represented by the early model of Rice and Johnson and the subsequent more detailed numerical computations of McMeeking and coworkers on a single void interacting with a crack tip. The second mechanism involves the simultaneous interaction of multiple voids on the plane ahead of the crack tip both during initiation and in subsequent crack growth. This mechanism is revealed by models with an embedded fracture process zone, such as those developed by Tvergaard and Hutchinson. While both mechanisms are based on void nucleation, growth and coalescence, the inferences from them with regard to crack growth initiation and growth are quantitatively different. The present paper provides a formulation and numerical analysis of a two-dimensional plane strain model with multiple discrete voids located ahead of a pre-existing crack tip. At initial void volume fractions that are sufficiently low, initiation and growth is approximately represented by the void by void mechanism. At somewhat higher initial void volume fractions, a transition in behavior occurs whereby many voids ahead of the tip grow at comparable rates and their interaction determines initiation toughness and crack growth resistance. The study demonstrates that improvements to be expected in fracture toughness by reducing the population of second phase particles responsible for nucleating voids cannot be understood in terms of trends of one mechanism alone. The transition from one mechanism to the other must be taken into account.     

Void growth and interaction in crystalline materials

An inelastic rate-dependent crystalline constitutive formulation and specialized computational schemes have been developed and used to obtain a detailed understanding of the interrelated physical mechanisms that can result in ductile material failure in rate-dependent porous crystalline materials subjected to finite inelastic deformations. The effects of void growth and interaction and specimen necking on material failure have been investigated for a single material cell, with a discrete cluster of four voids, where geometrical parameters have been varied to result in seven unique periodic and random void arrangements. The interrelated effects of void distribution and geometry, strain hardening, geometrical softening, localized plastic strains and slip-rates, and hydrostatic stresses on failure paths and ligament damage in face centered cubic (f.c.c.) crystalline materials have been studied. Results from this study are consistent with experimental observations that ductile failure can occur either due to void growth parallel to the stress axis, which results in void coalescence normal to the stress axis, or void interaction along bands, which are characterized by intense shear-strain localization and that intersect the free surface at regions of extensive specimen necking.     

Cohesive zone laws for fatigue crack growth: Numerical field projection of the micromechanical damage process in an elasto-plastic medium

Cohesive zone failure models are widely used to simulate fatigue crack propagation under cyclic loading, but the model parameters are phenomenological and are not closely tied to the underlying micromechanics of the problem. In this paper, we will inversely extract the cohesive zone laws for fatigue crack growth in an elasto-plastic ductile solid using a field projection method (FPM), which projects the equivalent tractions and separations at the cohesive crack-tip from field information outside the process zone. In our small-scale yielding model, a single row of discrete voids is deployed directly ahead of a crack in an elasto-plastic medium subjected to cyclic mode I K-field loading. Damage accumulation under cyclic loading is captured by the growth of voids within the micro-voiding zone ahead of the crack, while the evolution of the cohesive zone law representing the micro-voiding zone is inversely extracted via the FPM. We show that the field-projected cohesive zone law captures the essential micromechanisms of fatigue crack growth in the ductile medium: from loading and unloading hysteresis caused by void growth and plastic hardening, to the softening damage locus associated with crack propagation via a void by void growth mechanism. The results demonstrate the effectiveness of the FPM in obtaining a micromechanics-based cohesive zone law in-place of phenomenological models, which opens the way for a unified treatment of fatigue crack problems.     

Vapor pressure and void size effects on failure of a constrained ductile film

To achieve certain properties, semiconductor adhesives and molding compounds are made by blending filler particles with polymer matrix. Moisture collects at filler particle/polymer matrix interfaces and within voids of the composite. At reflow temperatures, the moisture vaporizes. The rapidly expanding vapor creates high internal pressure on pre-existing voids and particle/matrix interfaces. The simultaneous action of thermal stresses and internal vapor pressure drives both pre-existing and newly nucleated voids to grow and coalesce causing material failure. Particularly susceptible are polymeric films and adhesives joining elastic substrates, e.g. Ag filled epoxy. Several competing failure mechanisms are studied including: near-tip void growth and coalescence with the crack; extensive void growth and formation of an extended damaged zone emanating from the crack; and rapid void growth at highly stressed sites at large distances ahead of the crack, leading to multiple damaged zones. This competition is driven by the interplay between stress elevation induced by constrained plastic flow and stress relaxation due to vapor pressure assisted void growth.A model problem of a ductile film bonded between two elastic substrates, with a centerline crack, is studied. The computational study employs a Gurson porous material model incorporating vapor pressure effects. The formation of multiple damaged zones is favored when the film contains small voids or dilute second-phase particle distribution. The presence of large voids or high vapor pressure favor the growth of a self-similar damage zone emanating from the crack. High vapor pressure accelerates film cracking that can cause device failures.     

The effect of strain softening in the matrix material during void growth

A Finite element analysis has been employed to investigate the growth of an initially spherical void embedded in a cylinder of elastic-plastic material. The boundary displacement of this cylindrical cell is regulated by the value of a parameter α which controls the radial shrinkage of the cell as it elongates. A large strain analysis was used and results for both strain hardening and strain softening (after an appropriate amount of hardening has taken place) have been obtained. The effects of different mean tensile stresses, equivalent strains and initial void volume fractions have also been included. The numerical work shows relationships between the mechanical and geometrical variables that may favour ductile fracture by void coalescence or by shear decohesion.     

Modeling of ductile fracture: Application of the mechanism-based concepts

This paper summarizes our recent studies on modeling ductile fracture in structural materials using the mechanism-based concepts. We describe two numerical approaches to model the material failure process by void growth and coalescence. In the first approach, voids are considered explicitly and modeled using refined finite elements. In order to predict crack initiation and propagation, a void coalescence criterion is established by conducting a series of systematic finite element analyses of the void-containing, representative material volume (RMV) subjected to different macroscopic stress states and expressed as a function of the stress triaxiality ratio and the Lode angle. The discrete void approach provides a straightforward way for studying the effects of microstructure on fracture toughness. In the second approach, the void-containing material is considered as a homogenized continuum governed by porous plasticity models. This makes it possible to simulate large amount of crack extension because only one element is needed for a representative material volume. As an example, a numerical approach is proposed to predict ductile crack growth in thin panels of a 2024-T3 aluminum alloy, where a modified Gologanu–Leblond–Devaux model [Gologanu, M., Leblond, J.B., Devaux, J., 1993. Approximate models for ductile metals containing nonspherical voids – Case of axisymmetric prolate ellipsoidal cavities. J. Mech. Phys. Solids 41, 1723–1754; Gologanu, M., Leblond, J.B., Devaux, J., 1994. Approximate models for ductile metals containing nonspherical voids – Case of axisymmetric oblate ellipsoidal cavities. J. Eng. Mater. Tech. 116, 290–297; Gologanu, M., Leblond, J.B., Perrin, G., Devaux, J., 1995. Recent extensions of Gurson’s model for porous ductile metals. In: Suquet, P. (Ed.) Continuum Micromechanics. Springer-Verlag, pp. 61–130] is used to describe the evolution of void shape and void volume fraction and the associated material softening, and the material failure criterion is calibrated using experimental data. The calibrated computational model successfully predicts crack extension in various fracture specimens, including the compact tension specimen, middle crack tension specimens, multi-site damage specimens and the pressurized cylindrical shell specimen.     

Modeling of ductile fracture: Significance of void coalescence

In this paper void coalescence is regarded as the result of localization of plastic flow between enlarged voids. We obtain the failure criterion for a representative material volume (RMV) in terms of the macroscopic equivalent strain (E_c) as a function of the stress triaxiality parameter (T) and the Lode angle (θ) by conducting systematic finite element analyses of the void-containing RMV subjected to different macroscopic stress states. A series of parameter studies are conducted to examine the effects of the initial shape and volume fraction of the primary void and nucleation, growth, and coalescence of secondary voids on the predicted failure surface E_c(T, θ). As an application, a numerical approach is proposed to predict ductile crack growth in thin panels of a 2024-T3 aluminum alloy, where a porous plasticity model is used to describe the void growth process and the expression for E_c is calibrated using experimental data. The calibrated computational model is applied to predict crack extension in fracture specimens having various initial crack configurations and the numerical predictions agree very well with experimental measurements.     

An analysis of ductile rupture modes at a crack tip

An elastic-Viscoplastic model of a ductile, porous solid is used to study the influence of the nucleation and growth of micro-voids in the material near the tip of a crack. Conditions of small scale yielding are assumed, and the numerical analyses of the stress and strain fields are based on finite strain theory, so that crack tip blunting is fully accounted for. An array of large inclusions or inclusion colonies, with a relatively low strength, results in large voids near the crack tip at a rather early stage, whereas small second phase particles in the matrix material between the inclusions require large strains before cavities nucleate. Various distributions of the large inclusions, and various critical strains for nucleation of the small scale voids between the inclusions, are considered. Localization of plastic flow plays an important role in determining the failure path between the crack tip and the nearest larger void, and the path is strongly sensitive to the distribution of the large inclusions. Values of the J-integral and the crack opening displacement at fracture initiation are estimated, together with values of the tearing modulus during crack growth, and these values are related to experimental results.     

Cohesive zone laws for void growth — II. Numerical field projection of elasto-plastic fracture processes with vapor pressure

Modeling ductile fracture processes using Gurson-type cell elements has achieved considerable success in recent years. However, incorporating the full mechanisms of void growth and coalescence in cohesive zone laws for ductile fracture still remains an open challenge. In this work, a planar field projection method, combined with equilibrium field regularization, is used to extract crack-tip cohesive zone laws of void growth in an elastic-plastic solid. To this end, a single row of void-containing cell elements is deployed directly ahead of a crack in an elastic-plastic medium subjected to a remote K-field loading; the macroscopic behavior of each cell element is governed by the Gurson porous material relation, extended to incorporate vapor pressure effects. A thin elastic strip surrounding this fracture process zone is introduced, from which the cohesive zone variables can be extracted via the planar field projection method. We show that the material's initial porosity induces a highly convex traction-separation relationship — the cohesive traction reaches the peak almost instantaneously and decreases gradually with void growth, before succumbing to rapid softening during coalescence. The profile of this numerically extracted cohesive zone law is consistent with experimentally determined cohesive zone law in Part I for multiple micro-crazing in HIPS. In the presence of vapor pressure, both the cohesive traction and energy are dramatically lowered; the shape of the cohesive zone law, however, remains highly convex, which suggests that diffusive damage is still the governing failure mechanism.     

On strain and damage interactions during tearing: 3D in situ measurements and simulations for a ductile alloy (AA2139-T3)

Strain and damage interactions during tearing of a ductile Al-alloy with high work hardening are assessed in situ and in 3D combining two recently developed experimental techniques, namely, synchrotron laminography and digital volume correlation. Digital volume correlation consists of registering 3D laminography images. Via simultaneous assessments of 3D strain and damage at a distance of 1-mm ahead of a notch root of a thin Compact Tension-like specimen, it is found that parallel crossing slant strained bands are active from the beginning of loading in a region where the crack will be slanted. These bands have an intermittent activity but are stable in space. Even at late stages of deformation strained bands can stop their activity highlighting the importance of plasticity on the failure process rather than damage softening. One void is followed over the loading history and seen to grow and orient along the slant strained band at very late stages of deformation. Void growth and strain are quantified. Gurson–Tvergaard–Needleman-type simulations using damage nucleation for shear, which is based on the Lode parameter, are performed and capture slant fracture but not the initial strain fields and in particular the experimentally found slant bands. The band formation and strain distribution inside and outside the bands are discussed further using plane strain simulations accounting for plastic material heterogeneity in soft zones.     

Damage of ductile materials deforming under multiple plastic or viscoplastic mechanisms

This work presents a model to represent ductile failure (i.e. failure controlled by nucleation, growth and coalescence) of materials whose irreversible deformation is controlled by several plastic or viscoplastic deformation mechanisms. In addition work hardening may result from both isotropic and kinematic hardening. Damage is represented by a single variable representing void volume fraction. The model uses an additive decomposition of the plastic strain rate tensor. The model is developed based on the definition of damage dependant effective scalar stresses. The model is first developed within the generalized standard material framework and expressions for Helmholtz free energy, yield potential and dissipation potential are proposed. In absence of void nucleation, the evolution of the void volume fraction is governed by mass conservation and damage does not need to be represented by state variables. The model is extended to account for void nucleation. It is implemented in a finite element software to perform structural computations. The model is applied to three case studies: (i) failure by void growth and coalescence by internal necking (pipeline steel) where plastic flow is either governed by the Gurson–Tvergaard–Needleman model or the Thomason model, (ii) creep failure (Grade 91 creep resistant steel) where viscoplastic flow is controlled by dislocation creep or diffusional creep and (iii) ductile rupture after pre-compression (aluminum alloy) where kinematic hardening plays an important role.     

A constitutive model for elastoplastic solids containing primary and secondary voids

In many ductile metallic alloys, the damage process controlled by the growth and coalescence of primary voids nucleated on particles with a size varying typically between 1 and 100 μm, is affected by the growth of much smaller secondary voids nucleated on inclusions with a size varying typically between 0.1 and 3 μm. The goal of this work is first to quantify the potential effect of the growth of these secondary voids on the coalescence of primary voids using finite element (FE) unit cell calculations and second to formulate a new constitutive model incorporating this effect. The nucleation and growth of secondary voids do essentially not affect the growth of the primary voids but mainly accelerate the void coalescence process. The drop of the ductility caused by the presence of secondary voids increases if the nucleation strain decreases and/or if their volume fraction increases and/or if the primary voids are flat. A strong coupling is indeed observed between the shape of the primary voids and the growth of the second population enhancing the anisotropy of the ductility induced by void shape effects. The new micromechanics-based coalescence condition for internal necking introduces the softening induced by secondary voids growing in the ligament between two primary voids. The FE cell calculations were used to guide and assess the development of this model. The use of the coalescence condition relies on a closed-form model for estimating the evolution of the secondary voids in the vicinity of a primary cavity. This coalescence criterion is connected to an extended Gurson model for the first population including the effect of the void aspect ratio. With respect to classical models for single void population, this new constitutive model improves the predictive potential of damage constitutive models devoted to ductile metal while requiring only two new parameters, i.e. the initial porosity of second population and a void nucleation stress, without any additional adjustment.     

Verification of the transferability of micromechanical parameters by cell model calculations with visco-plastic materials

Finite element (FE) calculations of a cylindrical cell containing a spherical hole have been performed under large strain conditions for varying triaxiality with three different constitutive models for the matrix material, i.e. rate independent plastic material with isotropic hardening, visco-plastic material under both isothermal and adiabatic conditions, and porous plastic material with a second population of voids nucleating strain controlled. The “mesoscopic” stress-strain and void growth responses of the cell are compared with predictions of the modified Gurson model in order to study the effects of varying triaxiality and strain rate on the critical void volume fraction. The interaction of two different sizes of voids was modelled by changing the strain level for nucleation and the stress triaxiality. The study confirms that the void volume fraction at void coalescence does not depend significantly on the triaxiality if the initial volume fraction of the primary voids is small and if there are no secondary voids. The strain rate does not affect f_c either. The results also indicate that a single internal variable, f, is not sufficient to characterize the fracture processes in materials containing two different size-scales of void nucleating particles.     

Three dimensional microstructural effects on plane strain ductile crack growth

Ductile crack growth under mode I, plane strain, small scale yielding conditions is analyzed. Overall plane strain loading is prescribed, but a full 3D analysis is carried out to model three dimensional microstructural effects. An elastic-viscoplastic constitutive relation for a porous plastic solid is used to model the material. Two populations of second-phase particles are represented, large inclusions with low strength, which result in large voids near the crack tip at an early stage, and small second-phase particles, which require large strains before cavities nucleate. The larger inclusions are represented discretely and the effects of different three dimensional distributions on the crack path and on the overall crack growth rate are analyzed. For comparison purposes, a two dimensional distribution of cylindrical inclusions is analyzed. Crack growth occurs off the initial crack plane in all 3D computations, whereas straight ahead crack growth occurs with the two dimensional cylindrical inclusions. As a consequence, the three dimensional distributions of spherical inclusions exhibit an increased crack growth resistance as compared to the two dimensional distribution of cylindrical inclusions.     

The effect of porosity distribution on ductile failure

The effect of a nonuniform distribution of porosity on flow localization and failure in a porous material is analyzed numerically. The void density distribution and properties used to characterize the material behavior were obtained from measurements on partially consolidated and sintered iron powder. The calculations were carried out using an elastic viscoplastic constitutive relation for porous plastic solids. Local material failure is incorporated into the model through the dependence of the flow potential on void volume fraction. The region modelled is a small portion of a larger body, subject to various triaxial stress conditions. Both plane strain and axisymmetric deformations are considered with imposed periodic boundary conditions. Interactions between regions with higher void fractions promote plastic flow localization into a band. Local failure occurs by void growth and coalescence within the band. The results suggest a failure criterion based on a critical void volume fraction that is only weakly dependent on stress history. The critical void fraction does. however, depend on the initial void distribution and material hardening characteristics.