VIBRATION OF FLUID-FILLED MULTI-WALLED CARBON NANOTUBES SEEN VIA NONLOCAL ELASTICITY THEORY

Vibration characteristics of fluid-filled multi-walled carbon nanotubes axe studied by using nonlocal elastic Fliigge shell model. Vibration governing equations of an N-layer carbon nanotube are formulated by considering the scale effect. In the numerical simulations, the effects of different theories, small-scale, variation of wavenumber, the innermost radius and length of double- walled and triple-walled carbon nanotubes are considered. Vibrational frequencies decrease with an increase of scale coefficient, the innermost radius, length of nanotube and effects of wall number are negligible. The results show that the cut-off frequencies can be influenced by the wall number of nanotubes.     

Analysis of the vibrational behavior of the composite cylinders reinforced with non-uniform distributed carbon nanotubes using micro-mechanical approach

Nanocomposites are a promising new class of structural materials for the aerospace structural components. This paper presents a detailed theoretical investigation of dynamic characteristics of cylinders made of carbon nanotube-reinforced composites. The cylinders are modeled as a cylindrical shell consisting of an isotropic matrix reinforced with transversely isotropic carbon nanotubes. Two different types of carbon nanotube reinforcements are considered: single-walled carbon nanotubes (SWNTs) and multi-walled carbon nanotubes (MWNTs). The effects of carbon nanotube aspect ratio, dispersion, alignment and volume fraction on the elastic modulus are analyzed using the Eshelby–Mori–Tanaka theory. Mass and stiffness matrices are obtained via Ritz method and natural frequencies of the structure are derived through solving the eigenvalue problem. Finally, the effects of the CNT distribution on mode shapes and natural frequencies are discussed.     

Wave propagation in carbon nanotubes embedded in an elastic matrix

This paper reports the results of an investigation into the characteristics of wave propagation in carbon nanotubes embedded in an elastic matrix, based on an exact shell model. Each of the concentric tubes of multi-walled carbon nanotubes is considered as an individual elastic shell and coupled together through the van der Waals forces between two adjacent tubes. The matrix surrounding carbon nanotubes is described as a spring element defined by the Winkler model. The effects of rotatory inertia and elastic matrix on the wave velocity, the critical frequency, and the amplitude ratio between two adjacent tubes are described and discussed through numerical examples. The results obtained show that wave propagation in carbon nanotubes may appear in a critical frequency at which the wave velocity changes suddenly; the elastic matrix surrounding carbon nanotubes debases the critical frequency and the wave velocity, and changes the vibration modes between two adjacent tubes; the rotatory inertia based on an exact shell model obviously influences the wave velocity at some wave modes. Finally, a comparison of dispersion solutions from different shell models is given. The present work may serve as a useful reference for the application and the design of nano-electronic and nano-drive devices, nano-oscillators, and nano-sensors, in which carbon nanotubes act as basic elements.     

Effects of dimensional parameters and various boundary conditions on axisymmetric vibrations of multi-walled carbon nanotubes using a continuum model

Axisymmetric vibrations of multi-walled carbon nanotubes (MWCNTs) with finite length are investigated in this paper. A multi-walled carbon nanotube is modeled with multiple elastic isotropic shells. Based on a continuum model and considering van der Waals forces between tubes, a two-dimensional finite element model is developed to obtain axisymmetric natural frequencies and mode shapes of MWCNTs. First, the axisymmetric vibrational characteristics of single-walled carbon nanotubes are investigated, and then, they are compared with those of MWCNTs. The effects of van der Waals forces on radial vibration of MWCNTs are also explained. Moreover, influences of end conditions on radial and axial natural frequencies of carbon nanotubes (CNTs) with wide range of length-to-thickness ratio are studied by considering the free-free (F-F) and simply supported (S-S) end conditions. Besides, it is focused on dependence of axisymmetric mode frequencies on dimensional parameters such as length, diameter, as well as number of layers of MWCNTs. Through this, explicit expressions are found for calculating the radial breathing mode and longitudinal mode frequencies of MWCNTs.     

Buckling of embedded multi-walled carbon nanotubes under combined torsion and axial loading

This paper describes an investigation into elastic buckling of an embedded multi-walled carbon nanotube under combined torsion and axial loading, which takes account of the radial constraint from the surrounding elastic medium and van der Waals force between two adjacent tube walls. Depending on the ratio of radius to thickness, the multi-walled carbon nanotubes discussed here are classified as thin, thick, and nearly solid. Critical buckling load with the corresponding mode is obtained for multi-walled carbon nanotubes under combined torsion and axial loading, with various values of the radius to thickness ratio and surrounded with different elastic media. The study indicates that the buckling mode (m, n) of an embedded multi-walled carbon nanotube under combined torsion and axial loading is unique and it is different from that with axial compression only. New features for the buckling of an embedded multi-walled carbon nanotube under combined torsion and axial loading and the meaningful numerical results are useful in the design of nanodrive device, nanotorsional oscillator and rotational actuators, where multi-walled carbon nanotubes act as basic elements.     

Nonlocal shell model for elastic wave propagation in single- and double-walled carbon nanotubes

This paper investigates the transverse and torsional wave in single- and double-walled carbon nanotubes (SWCNTs and DWCNTs), focusing on the effect of carbon nanotube microstructure on wave dispersion. The SWCNTs and DWCNTs are modeled as nonlocal single and double elastic cylindrical shells. Molecular dynamics (MD) simulations indicate that the wave dispersion predicted by the nonlocal elastic cylindrical shell theory shows good agreement with that of the MD simulations in a wide frequency range up to the terahertz region. The nonlocal elastic shell theory provides a better prediction of the dispersion relationships than the classical shell theory when the wavenumber is large enough for the carbon nanotube microstructure to have a significant influence on the wave dispersion. The nonlocal shell models are required when the wavelengths are approximately less than 2.36×10⁻⁹ and 0.95×10⁻⁹ m for transverse wave in armchair (15,15) SWCNT and torsional wave in armchair (10,10) SWCNT, respectively. Moreover, an MD-based estimation of the scale coefficient e₀ for the nonlocal elastic cylindrical shell model is suggested. Due to the small-scale effects of SWCNTs and the interlayer van der Waals interaction of DWCNTs, the phase difference of the transverse wave in the inner and outer tube can be observed in MD simulations in wave propagation at high frequency. However, the van der Waals interaction has little effect on the phase difference of transverse wave.     

Nonlinear finite element analysis for vibrations of double-walled carbon nanotubes

The large-amplitude free vibration analysis of double-walled carbon nanotubes embedded in an elastic medium is investigated by means of a finite element formulation. A double-beam model is utilized in which the governing equations of layers are coupled with each other via the van der Waals interlayer forces. Von-Karman type nonlinear strain-displacement relationships are employed where the ends of the nanotube are constrained to move axially. The amplitude-frequency response curves for large-amplitude free vibrations of single-walled and double-walled carbon nanotubes with arbitrary boundary conditions are graphically illustrated. The effects of material constant of the surrounding elastic medium and the geometric parameters on the vibration characteristics are investigated. For a double-walled carbon nanotube with different boundary conditions between inner and outer tubes, the nonlinear frequencies are obtained apparently for the first time. Comparison of the results with those from the open literature is made for the amplitude-frequency curves where possible. This comparison illustrates that the present scheme yields very accurate results in predicting the nonlinear frequencies.     

Spectral element based model for wave propagation analysis in multi-wall carbon nanotubes

A spectrally formulated finite element is developed to study elastic waves in carbon nanotubes (CNT), where the frequency content of the exciting signal is at terahertz level. A multi-walled nanotube (MWNT) is modelled as an assemblage of Euler–Bernoulli beams connected throughout their length by distributed springs, whose stiffness is governed by the van der Waals force acting between the nanotubes. The spectral element is developed using the recently developed formulation strategy based on the solution of polynomial eigenvalue problem (PEP). A single element can model a MWNT with any number of walls. Studies are carried out to investigate the effect of the number of walls on the spectrum and dispersion relation. Effect of the number of walls on the frequency response function is investigated. Response of MWNT for terahertz level loading is analyzed for broad-band shear pulse.     

FLEXURAL WAVE DISPERSION IN MULTI-WALLED CARBON NANOTUBES CONVEYING FLUIDS

Motivated by the great potential of carbon nanotubes for developing nanofluidic devices, this paper presents a nonlocal elastic, Timoshenko multi-beam model with the second order of strain gradient taken into consideration and derives the corresponding dispersion relation of flexural wave in multi-walled carbon nanotubes conveying fuids. The study shows that the moving flow reduces the phase velocity of flexural wave of the lowest branch in carbon nanotubes. The phase velocity of flexural wave of the lowest branch decreases with an increase of flow velocity. However, the effects of flow velocity on the other branches of the wave dispersion are not obvious. The effect of microstructure characterized by nonlocal elasticity on the dispersion of flexural wave becomes more and more remarkable with an increase in wave number.     

Axial buckling of multi-walled carbon nanotubes and nanopeapods

In this paper, we investigate both pre- and post-buckling behaviors of multi-walled carbon nanotubes and multi-walled carbon nanopeapods by incorporating into the applied forces of a prescribed beam equation both van der Waals interactions between the adjacent walls of the nanotubes and the interactions between the fullerenes and the inner wall of the nanotube. Two beam theories are employed. First, we utilize Donnell’s equilibrium equation to derive an axial stability condition for the multi-walled carbon nanotubes and multi-walled carbon nanopeapods. We then determine analytically the critical forces for single-walled and double-walled nanotubes and nanopeapods. Given the outer nanotube of a fixed radius, we observe that the critical force and strain derived from the axial buckling stability criterion decrease as a result of the molecular interactions between the adjacent layers of the nanotubes and the molecular interactions between the embedded fullerenes and the inner carbon nanotube, which is in agreement with existing literature. Next, we utilize an Euler–Bernoulli beam equation incorporating the curvature effect to obtain the post-buckled axial bending displacement for the multi-walled nanotubes and nanopeapods. We find that the interactions between molecules generate an inward force, which tends to resist any applied forces. While the inward force induced by the fullerenes to the inner wall of the nanotube vanishes as we increase the applied force, the inward force induced by the layers increases as the applied force increases. The main contribution of this paper is the incorporation of both van der Waals interactions and the curvature effect into prescribed beam theories to accurately measure the critical forces and the buckled displacements of multi-walled nanotubes and nanopeapods subject to a small external force. Our analysis is relevant to future nano devices, such as biological sensors and measuring devices for small forces arising from electrical charges or Casimir forces.     

Effects of shear deformation on vibration of doublewalled carbon nanotubes embedded in an elastic medium

In this study, free vibration of simply supported multi-walled carbon nanotubes (CNTs) embedded in an elastic medium was investigated by using the generalized shear deformation-beam theory (GSDBT). The effects of surrounding elastic medium, which is considered as a spring, defined by the Winkler model, and van der Waals forces from adjacent nanotubes are taken into account. Third-order shear deformation (TOSD) theory is used to study free vibration of a multi-walled carbon nanotube embedded in an elastic medium. Unlike Timoshenko beam theory, TOSD theory satisfies zero traction boundary conditions on the upper and lower surface of the structures, so there is no need to use a shear correction factor. Free vibration frequencies and amplitude ratios were obtained for various sides to thickness ratios and elastic medium effects and results are compared with previous studies. The results showed that significant difference exist between TOSD and Euler beam theory. It is also interesting to note that, although frequency parameter is increasing by increasing stiffness of embedded medium, amplitude ratios are insensitive to stiffness of embedded elastic medium. Dedicated to the honorable memory of my beloved mother Fatma Aydogdu (Romania,1933-Tekirdag, August 7, 2007)     

GUIDED CIRCUMFERENTIAL WAVES IN DOUBLE-WALLED CARBON NANOTUBES

A model of guided circumferential waves propagating in double-walled carbon nan- otubes is built by the theory of wave propagation in continuum mechanics,while the van der Waals force between the inner and outer nanotube has been taken into account in the model.The dispersion curves of the guided circumferential wave propagation are studied,and some dispersion characteristics are illustrated by comparing with those of single-walled carbon nanotubes.It is found that in double-walled carbon nanotubes,the guided circumferential waves will propagate in more dispersive ways.More interactions between neighboring wave modes may take place.In particular,it has been found that a couple of wave modes may disappear at a certain frequency and that,while a couple of wave modes disappear,another new couple of wave modes are excited at the same wave number.     

DYNAMIC STABILITY ANALYSIS OF EMBEDDED MULTI-WALLED CARBON NANOTUBES IN THERMAL ENVIRONMENT

In the present paper, the dynamic stability of multi-walled carbon nanotubes(MWCNTs) embedded in an elastic medium is investigated including thermal environment effects. To this end, a nonlocal Timoshenko beam model is developed which captures small scale effects.Dynamic governing equations of the carbon nanotubes are formulated based on the Timoshenko beam theory including the effects of axial compressive force. Then a parametric study is conducted to investigate the influences of static load factor, temperature change, nonlocal parameter, slenderness ratio and spring constant of the elastic medium on the dynamic stability characteristics of MWCNTs with simply-supported end supports.     

Shell element based model for wave propagation analysis in multi-wall carbon nanotubes

A spectrally formulated finite element is developed to study very high frequency elastic waves in carbon nanotubes (CNTs). A multi-walled nanotube (MWNT) is modelled as an assemblage of shell elements connected throughout their length by distributed springs, whose stiffness is governed by the van der Waals force acting between the nanotubes. The spectral element is formulated using the recently developed strategy based on singular value decomposition (SVD) and polynomial eigenvalue problem (PEP). The element can model a MWNT with any number of walls. Studies are carried out to investigate the effect of the number of walls on the spectrum and dispersion relation. The importance of shell element based model over the beam model is established. The zone of validity of the previously developed beam model is also investigated. It is shown that the shell model is required to capture the symmetric Lamb wave modes. It is also shown through numerical examples that the developed element efficiently captures the response of MWNT for Tera-hertz level frequency loading.     

Postbuckling prediction of double-walled carbon nanotubes under axial compression

An elastic double-shell model is presented for the buckling and postbuckling of a double-walled carbon nanotube subjected to axial compression. The analysis is based on a continuum mechanics model in which each tube of a double-walled carbon nanotube is described as an individual elastic shell and the interlayer friction is negligible between the inner and outer tubes. The governing equations are based on the Karman–Donnell-type nonlinear differential equations. The van der Waals interaction between the inner and outer nanotubes and the nonlinear prebuckling deformations of the shell are both taken into account. A boundary layer theory of shell buckling is extended to the case of double-walled carbon nanotubes under axial compression. A singular perturbation technique is employed to determine the buckling loads and postbuckling equilibrium paths. Numerical results reveal that the single-walled carbon nanotube and the double-walled carbon nanotube both have an unstable postbuckling behavior.     

Time-harmonic wave propagation in a pre-stressed compressible elastic bi-material laminate

The dispersive behaviour of time-harmonic waves propagating along a principal direction in a perfectly bonded pre-stressed compressible elastic bi-material laminate is considered. The dispersion relation which relates wave speed and wavenumber is obtained by formulating the incremental boundary value problem and the use of the propagator matrix technique. At the low wavenumber limit, depending on the pre-stress, both the fundamental mode and the next lowest mode may have finite phase speeds. For the higher modes which have infinite phase speeds in the low wavenumber region, an expression to determine the cut-off frequencies is obtained. At the high wavenumber limit, the phase speeds of the fundamental mode and higher modes tend to phase speeds of the surface wave, the interfacial wave or the limiting phase speed of the composite. For numerical examples, either a two-parameter compressible neo-Hookean material or a two-parameter compressible Varga material is assumed.     

INVESTIGATION OF THE DYNAMIC BUCKLING OF DOUBLEWALLED CARBON NANOTUBE SUBJECTED TO AXIAL PERIODIC DISTURBING FORCES

IntroductionThediscoveryofthefirstcarbonnanotubes[1]hasattractedwideattentionandstimulatedextensivestudies[2 - 5 ].Thestudiesshowedthatthecarbonnanotubesexhibitsuperiormechanical,electronicandchemicalproperties.Onthemechanicalbehavior,thecarbonnanotubespossessexceptionallyhighstrength ,stiffnessandelasticmodulus.Theestimatemodulusofthecarbonnanotubemayreachashighas 1TPa.Itisthelargestofallknownmaterials.Thestrengthorstiffnessishigherthananyknownfiber[3].Thecarbonnanotubeareusedascompositemat…     

梯度半空间梯度覆层中的Love波

对功能梯度弹性半空间上覆盖一层功能梯度材料中的Love波的频散问题进行了研究,给出 了Love波频散方程的一般形式. 对功能梯度弹性半空间和功能梯度覆层的反平面剪切波的运 动控制方程进行了求解,给出了半空间和覆盖层的位移、应力解析解,给出了Love波在该解析 解下的频散方程. 以覆盖层的剪切弹性模量和质量密度均呈指数函数变化,半空间的剪切弹 性模量和质量密度均呈抛物线变化为例,利用迭代方法对频散方程进行了求解,给出了频散 曲线. 结果显示：在最低阶振型频散曲线中出现截止频率.     

Dispersion effects of extensional waves in pre-stressed imperfectly bonded incompressible elastic layered composites

The effect of an imperfect interface, on time-harmonic extensional wave propagation in a pre-stressed symmetric layered composite is considered. The bimaterial composite consists of incompressible isotropic elastic materials. The shear spring type resistance model employed to simulate the imperfect interface can accommodate the extreme cases of perfect bonding and a fully slipping interface. The dispersion relation obtained by formulating the incremental boundary-value problem and the use of the propagator matrix technique, is analyzed at the low and high wavenumber limits. For the perfectly bonded and imperfect interface cases in the low wavenumber region, only the fundamental mode has a finite phase speed, while other higher modes have an infinite phase speed when the dimensionless wavenumber approaches zero. However, for the fully slipping interface in the low wavenumber region, both the fundamental mode and the next lowest mode have finite phase speeds. In the high wavenumber region, when the dimensionless wavenumber tends to infinity, the phase speeds of the fundamental mode and the higher modes depend on the phase speeds of the surface and interfacial waves and on the limiting phase speed of the composite. An expression to determine the cut-off frequencies is obtained from the dispersion relation. Numerical examples of dispersion curves are presented, where when the material has to be prescribed either Mooney–Rivlin material or Varga material is assumed. The effect of the imperfect interface is clearly evident in the numerical results.