Sensitive electrochemical determination of Sudan II in food samples using a poly(aminosulfonic acid) modified glassy carbon electrode

In this paper, a novel poly(aminosulfonic acid) modified glassy carbon electrode (PASA/GCE) for the determination of Sudan II was fabricated through electrochemical polymerizat ion. The electrochemical behavior of Sudan II at the modified electrode was studied by cyclic voltammetry. Results show that the modified electrode exhibits excellent electrocatalytic activity toward the electrochemical redox reaction of Sudan II. Under optimal experimental conditions, the oxidation peak current is linearly proportional to the concentration of Sudan II in the ranges of 4.0 × 10^?8 to 1.0 × 10^?6 mol L^?1 and 1.0 × 10^?6 to 1.2 × 10^?5 mol L^?1. The linear regression equations are i _pa(A) = 2.87c + 3.74 × 10^?6, r = 0.9977 and i _pa(A) = 0.78c + 6.11 × 10^?6, r = 0.9982, respectively, and the detection limit is 4.0 × 10^?9 mol L^?1. The novel method shows good recovery, reproducibility and sensitivity for the voltammetric determination of Sudan II in food samples.     

Electrochemical reduction of ytterbium in perchloric media

The electrochemical behavior of Yb³⁺ in perchloric media was studied by cyclic voltammetry and current reversal chronopotentiometry at several temperatures. The results show that the reversible electrochemical reduction of Yb³⁺ is followed by homogeneous reactions. The experimentally determined diffusion coefficients of ytterbic ion are 0.41×10^?5, 0.48×10^?5 and 0.53×10^?5 cm² s^?1 at 4.2, 9.2 and 14.7°C, respectively, in 0.5 M NaClO₄ solutions. From these data a value of 16 kJ mol^?1 (3830 cal mol^?1) was obtained for the activation energy for diffusion of ytterbic ion. From the activation energy the diffusion coefficient of ytterbic ion at 25.0°C was estimated. The value of 0.67×10^?5 cm² s^?1 was obtained. In all the experiments the initial pH was maintained at 4.1.     

Determination of ruthenium as ruthenate by stripping voltammetry

Stripping voltammetric analysis of ruthenium with a platinum RDE was studied in the concentration range from 5×10^?7 to 1.2×10^?5M RuO₄^2?, where linear dependence of the anodic peak height on the ruthenate concentration was obtained. Special attention has been paid to a simple preparation of the sample for analysis. Ruthenate can be prepared directly in the electrolytic vessel from the ruthenium compounds by oxidation with potassium persulphate in alkaline medium. As a supporting electrolyte 10^?2 to 5×10^?2M K₂S₂O₈ with 10^?1 to 1 M KOH was used.     

One-step construction of an electrode modified with electrodeposited Au/SiO2 nanoparticles, and its application to the determination of NADH and ethanol

A new electrode was developed by one-step potentiostatic electrodeposition (at ?2.0 V for 20 s) of Au/SiO₂ nanoparticles on a glassy carbon electrode. The resulting electrode (nano-Au/SiO₂/GCE) was characterized by scanning electronic microscopy, X-ray photoelectron spectroscopy and electrochemical techniques. The electrochemical behavior of dihydronicotinamide adenine dinucleotide (NADH) at the nano-Au/SiO₂/GCE were thoroughly investigated. Compared to the unmodified electrode, the overpotential decreased by about 300 mV, and the current response significantly increased. These changes indicated that the modified electrode showed excellent catalytic activity in the oxidation of NADH. A linear relationship was obtained in the NADH concentration range from 1.0?×?10^?6 to 1.0?×?10^?4 mol?L^?1. In addition, amperometric sensing of ethanol at the nano-Au/SiO₂/GCE in combination with alcohol dehydrogenase and nicotinamide adenine dinucleotide was successfully demonstrated. A wide linear response was also found for ethanol in the range from 5.0?×?10^?5 to 1.0?×?10^?3 mol?L^?1 and 1.0?×?10^?3 to 1.0?×?10^?2 mol?L^?1, respectively. The method was successfully applied to determine ethanol in beer and biological samples.     

Spectrophotometric and spectrofluorimetric determination of iodide by extraction of ICl−2 with rhodamine B

Iodide is determined after oxidation with nitrous acid in 5 M hydrochloric acid to ICl^?₂. The ion-pair formed with rhodamine B is extracted into toluene and measured spectrophotometrically (0.5–5 × 10^?5 M) or spectrofluorimetrically (1–10 × 10^?6 M). The relative standard deviations were 1.8% for the determination of 5 × 10^?6 M iodide (n = 5) by spectrofluorimetry and 2.3% (n = 50) for 1 × 10^?5 M iodide by spectrophotometry. Periodate, iodate and iodine responded exactly as iodide.     

Frequency dependence of intermolecular proton spin-lattice relaxation rate and pair-diffusion constant in neat acetonitrile -d2

Frequency dependence of intermolecular proton spin-lattice relaxation rate [(1/T₁)inter(ω)] in neat acetonitrile-d₂ was studied. From (1/T₁)inter(ω) pair-diffusion constants were determined to be 0.281 × 10^?5 and 0.237 × 10^?5 cm² s^?1 at 22 and ?32.6°C, respectively. These values differ greatly from the self-diffusion constants.     

Spectrophotometric study of the reaction of titanium with bromopyrogallol red in the presence of cetylpyridinium bromide

Optimal conditions were found for the reaction of Ti(IV) with bromopyrogallol red (λ = 625 nm, pH = 2.5, c_DG = 4 × 10^?5M, c_CPB = 5 × 10^?4M) and a new method was developed for the spectrophotometric determination of titanium in the concentration range 0.05–0.5 μg ml^?1. A mechanism was proposed for the studied reaction on the basis of a kinetic study.     

Electrochemical determination of norepinephrine on the membrane of silver nanoparticles doped poly-glycine eliminating the interference of ascorbic acid

The silver nanoparticles doped poly-glycine composite membrane was prepared by cyclic voltammetry on the surface of the glassy carbon electrode (GCE). The morphology and electrochemical properties were characterized by scanning electron microscopy and cyclic voltammetry, respectively, and in detail, the electrochemical behaviors of the norepinephrine (NE) on this membrane were studied. The results showed that the membrane had good catalytic properties for the oxidative–reductive reaction of NE. NE had a couple of sensitive oxidative-reductive current peaks. The reductive peak currents were linearly with its concentration in the range of 1.90?×?10^?7 to 7.00?×?10^?6 and 7.00?×?10^?6 to 1.00?×?10^?4?mol l^?1, and the linear regressive equations were i _pc (A)?=?3.73?×?10^?6?+?0.70C (mol l^?1), i _pc (A)?=?9.83?×?10^?5?+?0.12C (mol l^?1), respectively, with the relate coefficient (r) of 0.9926 and 0.9944. The detection limit was 1.2?×?10^?7?mol l^?1 (S/N?=?3), which could be used to determine the content of NE and at the same time, eliminate the interference of the ascorbic acid (AA). The proposed method had high sensitivity, good selectivity and stability.     

Electrophoretic and spectrophotometric determination of triiodides of sulfur-containing organic cations

Trimethylsulfonium triiodide (I) and p-xylylene-bis-(tetrahydrothiophenium) triiodide (II) were identified and determined by capillary electrophoresis with the resolution R _s = 4.86 using an unmodified quartz capillary. The procedure ensures the determination of sulfur-containing organic compounds in a concentration range of 1.0 × 10^?5–5.0 × 10^?4 M RSD ≤ 5%). The high stability of trimethylsulfonium triiodide and p-xylylene-bis-(tetrahydrothiophenium) triiodide in chloroform and acetonitrile solutions was found by spectrophotometry. A procedure was proposed for the spectrophotometric determination of compounds I and II as ion associates of sulfur-containing cations with a sulfophthalein dye, Bromocresol Purple (c _min (I) = 1.32 × 10^?5 M, c _min (II) = 7.1 × 10^?6 M, RSD = 5%), and by the characteristic absorption of the triiodide anion in acetonitrile (c _min (I) = 3.18 × 10^?6 M, c _min (II) = 2.76 × 10^?6 M, RSD <-3%).     

Direct electrochemistry and electrochemical biosensing of glucose oxidase based on CdSe@CdS quantum dots and MWNT-modified electrode

The direct electron transfer of glucose oxidase (GOx) was achieved based on the immobilization of CdSe@CdS quantum dots on glassy carbon electrode by multi-wall carbon nanotubes (MWNTs)-chitosan (Chit) film. The immobilized GOx displayed a pair of well-defined and reversible redox peaks with a formal potential (E ^θ’) of ?0.459 V (versus Ag/AgCl) in 0.1 M pH 7.0 phosphate buffer solution. The apparent heterogeneous electron transfer rate constants (k _s) of GOx confined in MWNTs-Chit/CdSe@CdS membrane were evaluated as 1.56 s^?1 according to Laviron's equation. The surface concentration (Γ*) of the electroactive GOx in the MWNTs-Chit film was estimated to be (6.52?±?0.01)?×?10^?11?mol?cm^?2. Meanwhile, the catalytic ability of GOx toward the oxidation of glucose was studied. Its apparent Michaelis–Menten constant for glucose was 0.46?±?0.01 mM, showing a good affinity. The linear range for glucose determination was from 1.6?×?10^?4 to 5.6?×?10^?3?M with a relatively high sensitivity of 31.13?±?0.02 μA?mM^?1?cm^?2 and a detection limit of 2.5?×?10^?5?M (S/N=3).     

Flow-injection and sequential injection determination of hydroxypurines on an electrode modified with mixed-valence ruthenium and iridium oxides

Mixed-valence ruthenium (RuO _x ) and iridium (IrO _x ) oxides and composites on their basis (RuO _x -IrO _x or IrO _x -RuO _x ) electrodeposited onto the surface of a glassy carbon electrode exhibit a catalytic activity in the electrooxidation of uric acid, xanthine, and hypoxanthine. The transition from metal oxides to composites of two mixed-valence metal oxides leads to an increase in the catalytic effect of the oxidation of hydroxypurines. The IrO _x -RuO _x composite demonstrated the highest catalytic activity. Procedures for the amperometric detection of hydroxypurines on this composite electrode under the conditions of flow-injection analysis (FIA) and sequential injection analysis are proposed. A linear dependence of an analytical signal on the analyte concentration is observed in the range 1 × 10^?6 to 5 × 10^?3 M for uric acid and xanthine and 5 × 10^?7 to 5 × 10^?3 M for hypoxanthine under FIA conditions and from 5 × 10^?7 to 5 × 10^?3 M for uric acid and xanthine and 5 × 10^?9 to 5 × 10^?3 M for hypoxanthine in sequential injection analysis. Under FIA conditions, the sensitivity, rapidity, and performance of the analysis increase compared to the stationary conditions. The advantages of sequential injection analysis over FIA include a lower consumption of the supporting electrolyte; the absence of pumps and connections; and an increase in sensitivity, reproducibility, and rapidity.     

The electrochemical stripping determination of bismuth in aqueous and nonaqueous media after its extraction

The cyclic voltammetry of bismuth in aqueous media and electrochemical stripping determination of bismuth in aqueous and nonaqueous media after its extraction using a rotating disc electrode of glassy carbon was studied. To raise the conductivity of the organic medium and for the preparation of a convenients medium for the determination of bismuth, an alcoholic (methanol) solution of NH₄SCN+HClO₄ was employed. In non-aqueous medium bismuth can be determined down to concentrations 10^?8M by anodic stripping voltammetry and to 5×10^?8M by anodic stripping chronopotentiometry. The selectivity of the determination of bismuth after its extraction was studied. Electrochemical determination of 10^?6M Bi³⁺ with error ±3–4% was not interfered with by these elements: Co²⁺, Ni²⁺, Zn²⁺, Cd²⁺, As³⁺ in the concentration 8×10^?3M, Fe³⁺, In³⁺, Sn²⁺ and Sn⁴⁺ (5× 10^?3M), Cu²⁺ (10^?3M), Sb³⁺ (1.5×10^?4M) and Hg²⁺ (2×10^?5M). The reproducibility of the electrochemical determination of bismuth according to the recommended procedure is very good.     

Self-assembling of Prussian blue nanocubic particles on nanoporous glassy carbon and its use in the electrocatalytic reduction of hydrogen peroxide

In this paper, self-assembled Prussian blue nanocubic particles on nanoporous glassy carbon was developed. The morphology of the PBNP-modified porous glassy carbon was characterized by scanning electron microscopy. The PBNP-GCE-red film-modified electrode was used for the sensitive detection of hydrogen peroxide. The electrochemical behavior of the resulting sensor was investigated using cyclic voltammetry and chronoamperometry. The value of α, k _cat, and D was calculated as 0.35, 1.7 × 10⁵ cm³ mol^?1 s^?1, and 2.6 × 10^?5 cm² s^?1, respectively. The calibration curve for hydrogen peroxide determination was linear over 0–600 μM with a detection limit (S/N = 3) of 0.51 μM.     

The effect of thallium ions on the gold dissolution rate in thiosulfate electrolytes

The effect of TlNO₃ additions in the concentration (c ₁) range from 5 × 10^?6 to 1 × 10^?4 M on the anodic dissolution of gold in sodium thiosulfate solutions with the concentration (c ₂) from 0.005 to 0.2 M is studied by voltammetry on the electrode surface renewed by cutting off a thin metal layer immediately in solution and also by the quartz-crystal microbalance method. For c ₂ = 0.2 M, as c ₁ increases from 5 × 10^?6 to 1 × 10^?4 M, the gold anodic dissolution rate is observed to increase from 0.02 (in the absence of TlNO₃) to 0.75 mA/cm² for c ₁ = 7.5 × 10^?5 M according to a nearly linear law. The dissolution accelerates because the effective values of the transfer coefficient and the exchange current density increase from 0.2 and 4 ??A/cm² (in the absence of TlNO₃ admixtures) to 0.47 and 35 ??A/cm² (for c ₁ = 1 × 10^?4), respectively. Experiments with the renewal of the electrode surface in the course of electrolysis suggest that the gold dissolution is catalyzed in the presence of thallium ions by the adsorption mechanism and also as the result of the mixed kinetics of their adsorption on the electrode surface.     

Chemical and electrochemical behavior of metallic technetium in acidic media

The chemical and electrochemical properties of technetium metal were studied in 1–6 M HX and in 1 M NaX (pH 1 and 2.5), X = Cl, NO₃. The chemical dissolution rates of Tc metal were higher in HNO₃ than in HCl (i.e. 8.63 × 10^?5 mol cm^?2 h^?1 in 6 M HNO₃ versus 2.05 × 10^?9 mol cm^?2 h^?1 in 6 M HCl). The electrochemical dissolution rates in HNO₃ and HCl were similar and mainly depended on the electrochemical potential and the acid concentration. The optimum dissolution of Tc metal was obtained in 1 M HNO₃ at 1 V/AgAgCl (1.70 × 10^?3 mol cm^?2 h^?1). The dissolution potentials of Tc metal in nitric acid were in the range of 0.596–0.832 V/AgAgCl. Comparison of Tc behavior with Mo and Ru indicated that in HNO₃, the dissolution rate followed the order: Mo > Tc > Ru, and for dissolution potential the order: E _diss(Ru) > E _diss(Tc) > E _diss(Mo). The corrosion products of Tc metal were analyzed in HCl solution by UV–Visible spectroscopy and showed the presence of TcO₄ ^?. The surface of the electrode was characterized by microscopic techniques; it indicated that Tc metal preferentially corroded at the scratches formed during the polishing and no oxide layer was observed.     

Rapid voltammetric determination of maltol in some foods and beverages using a poly(methylene blue)/graphene-modified glassy carbon electrode

A novel poly(methylene blue)/graphene composite glassy carbon electrode was fabricated and the electrochemical behavior of maltol at the modified electrode was studied by cyclic voltammetry. In phosphate-buffered solution, the modified electrode exhibited excellent electrocatalytic activity towards the electrochemical oxidation of maltol. Under optimized conditions, the oxidation peak current showed a linear relationship with the concentrations of maltol in the ranges of 8.00?×?10^?7 to 4.00?×?10^?5 and 4.00?×?10^?5 to 5.40?×?10^?4 mol L^?1, with a detection limit of 6.50?×?10^?8 mol L^?1. The performance of the developed method was validated in terms of linearity (r?=?0.9981 and 0.9955), recovery (97.0?99.3 %), reproducibility (relative standard deviations?≤?3.1 %, n?=?6), and robustness. The method shows excellent sensitivity, selectivity, and reproducibility and has been successfully applied to analyzing maltol in a wide variety of food products.     

The Electrocatalytic Oxidation of Thymine at α‐Cyclodextrin Incorporated Carbon Nanotube‐Coated Electrode

Electrocatalytic oxidation of thymine at α‐cyclodextrin (α‐CD) incorporated carbon nanotube‐coated electrode (CNT/CE) was thoroughly studied in alkaline media. CNT showed an electrocatalytic effect on the oxidation of thymine, formation of a supramolecular inclusion complex between α‐CD and thymine at CNT/CE further enhanced the sensitivity to thymine. The electrocatalytic behavior was further developed as a sensitive detection scheme for thymine by differential pulse voltammetry. A linear calibration over the concentration range from 2.5×10^?5 to 1.8×10^?3 mol/L in pH 10.8 NaHCO₃‐Na₂CO₃ buffer solution was obtained with a detection limit of 5×10^?6 mol/L.     

Reversible intersystem crossing,fluorescence lifetime lengthening and collisionally induced phosphorescence in biacetyl

The emissions of biacetyl excited at 4200 Å were studied at pressures down to 10^?3 torr. Apart from the well-known nanosecond fluorescence, a new emission of the same spectral composition was found with a non-exponential decay in the microsecond range. Furthermore the phosphorescence, as defined by its spectral composition, was found to be collisionally induced.The results imply that after excitation, the molecule rapidly transfers (rate constant k_S→T) to the triplet state, giving rise to the nanosecond decay time; and can then transfer back to the singlet state (rate constant k_T→S), giving rise to the microsecond emission. At the same time internal conversion can occur (k_S→S0). From an analysis of the data we find for k_S→S0 = 2.4 × 10⁷ sec^?1, k_S→T = 7.6 × 10⁷ sec^?1, k_T→S = 1.9 × 10⁵ sec^?1. The kinetic treatment can be transformed to a quantum mechanical one, yielding values for the triplet level density (?_T), the coupling element V_ST and the number of triplet states (N) coupled to the singlet excited. At 4200 Å we find ?_T = 6.3 × 10⁵cm, V_ST = 1.0 × 10^?5 cm^?1, N = 400.Phosphorescence occurs only when the molecule is deactivated by collisions to a vibronic triplet state below the vibrationless excited singlet state. The efficiency of biacetyl collisions is 0.54.     

Electrochemical Responses and Sensitivities of Films Based on Multi-Walled Carbon Nanotubes in Aqueous Solutions

Novel films consisting of multi-walled carbon nanotubes (MWCNTs) were fabricated by means of chemical vapor deposition with decomposition of either acetonitrile (ACN) or benzene (BZ) using ferrocene as catalyst. The electrochemical responses of MWCNT-based films towards the ferrocyanide/ferricyanide, [Fe(CN)₆]^3?/4? redox couple were probed by means of cyclic voltammetry and electrochemical impedance spectroscopy at 25.0?±?0.5?°C. Both MWCNT-based films exhibit Nernstian response towards [Fe(CN)₆]^3?/4? with some slight kinetic differences. Namely, heterogeneous electron transfer rate constants lying in ranges of 2.69?×?10^?2?C1.7?×?10^?3 and 9.0?×?10^?3?C2.6?×?10^?3?cm·s^?1 were obtained at v?=?0.05?V·s^?1 for MWCNT_ACN and MWCNT_BZ, respectively. The detection limit of MWCNT_ACN, estimated to be about 4.70?×?10^?7?mol·L^?1 at v?=?0.05?V·s^?1, tends to become slightly poorer with the increase of the scan rate, namely at v?=?0.10?V·s^?1 the detection limit of 1.70?×?10^?6?mol·L^?1 was determined. Slightly poorer response ability was exhibited by MWCNT_BZ; specifically the detection limits of 1.57?×?10^?6 and 4.35?×?10^?6?mol·L^?1 were determined at v?=?0.05 and v?=?0.10?V·s^?1, respectively. The sensitivities of MWCNT_ACN and MWCNT_BZ towards [Fe(CN)₆]^3?/4? were determined as 1.60?×?10^?7 and 1.51?×?10^?7?A·L·mol^?1·cm^?2, respectively. The excellent electrochemical performance of MWCNT_ACN is attributed to the presence of incorporated nitrogen in the nanotube??s structure.     

Surface analysis of tablets by room-temperature phosphorimetry

The feasibility of surface analysis of homogeneous tablets by room-temperature phosphorimetry is studied for propranolol, p-aminobenzoic acid and acetylsalicylic acid as model compounds. Potassium iodide is used to provide the heavy atom; starch or carboxymethylcellulose is used as the excipient. The analytically useful ranges were found to be 3 × 10^?5?3 × 10^?4% for p-aminobenzoic acid, 5 × 10^?4?5 × 10^?2% for propranolol, and ? 10% for acetylsallicylic acid (all by weight in tablets).