Preparation of single-enantiomer semiochemicals using 2-methoxy-2-(1-naphthyl)propionic acid and 2-methoxy-2-(9-phenanthryl)propionic acid

Enantioresolution of 3-octanol, 6-methyl-5-hepten-2-ol (sulcatol), and 1-octen-3-ol was conducted using (S)-(+)-2-methoxy-2-(1-naphthyl)propionic acid (MαNP acid) and (S)-(+)-2-methoxy-2-(9-phenanthryl)propionic acid (M9PP acid). In each case, the diastereomeric esters obtained were readily separated by HPLC. The stereochemistry of the esters could be assigned from their respective ¹H NMR analyses. Solvolyses of the esters gave enantiopure alcohols and acids. MαNP and M9PP acids displayed almost equivalent properties in ¹H NMR anisotropy. The chiral resolving ability of M9PP acid was slightly superior to that of MαNP acid in HPLC.     

A revised structure for hermonionic acid

Hermonionic acid and its decarboxylated product have been isolated from $\text{Garcinia}$$\text{quaesita}$. ¹³C NMR spectral and chemical evidence indicate that hermonionic acid is 2-0-[2-(3-methylbut-2-enyl)-3-methoxy- 4-hydroxy-5-(3,7-dimethylocta-2,6-dienyl]-4-methoxy-5-(3-methylbut-2-enyl-6-hydroxybenzoic acid. The previously assigned dienone structure for this acid is incorrect.     

Preparation and antiplatelet activity of glycidic acid derivatives

Arylalkanoic acid derivatives exhibit a variety of biological effects. In the current publication some of new glycidic acid derivatives were prepared via the Darzens condensation. The synthetic approach, analytical and spectroscopic data of all newly synthesized compounds are presented. The prepared compounds were evaluated as potential inhibitors of arachidonic acid-induced platelet aggregation and their activity was compared with that of acetylsalicylic acid as the standard. (±)-Ethyl 3-{4-[(4-methoxyphenyl)sulfanyl]phenyl}-3-methyl-cis-oxirane-2-carboxylate (IC₅₀ = 0.07 mmol L⁻¹) and (±)-3-{4-[(4-methoxyphenyl)sulfanyl]phenyl}-3-methyl-cis-oxirane-2-carboxylic acid (IC₅₀ = 0.06 mmol L⁻¹) showed the highest antiplatelet activity against arachidonic acid-induced platelet aggregation comparable with the standard. Structure-activity relationships between the chemical structure, lipophilicity, and the antiplatelet activity of the evaluated compounds are discussed.     

Biosynthesis of verrucarins and roridins. 2. Incorporation of acetate in cis-transmuconic acid and of mevalonate in roridinic acid]

Incorporation experiments using sodium [1-¹⁴C]-acetate and sodium [2-¹⁴C]- and [2-¹⁴C,2-³H₂]-mevalonate and degradations of the verrucarin A ( 1 ) and roridin A ( 2 ) so produced demonstrate that cis,trans-muconic acid ( 3 ) is formed from 3 acetate units. The cis,trans-muconic acid and the C₂-side-chain structural elements of roridinic acid ( 6 ) are built up from 4 acetate units; the cis-oricntcd C(11)-carboxyl group of 6 originates from C(1) of acctic acid. The structural moiety of roridinic acid ( 6 ) corresponding to verrucarinic, acid ( 7 ) originates from mevalonate, as does 7 . A new degradation scheme was devised for roridinic acid ( 6 ); the oxime 23 of its 13 dehydro-detrahydro derivative 21 underwent cleavage with SOCl₂ and subsequent hydrolysis to yield verrucarinolactone ( 8 ), acetonitrile ( 26 ) and methyl adipaldohydate ( 27 ) by a heterolytic Beckmann fragmentation reaction.     

Extraction and separation of Th(IV) and U(VI) from nitric acid media using PIA-8 and HDEHP

Extraction behavior of Th(IV) and U(VI) has been investigated with bis(2-ethylhexyl) phosphinic acid (PIA-8) and bis(2-ethylhexyl) phosphoric acid (HDEHP) from nitric acid media in toluene. The optimum conditions for extraction of these metals have been established by studying various parameters like acid concentration, pH, reagent concentration, diluents and shaking time. The extraction of Th(IV) was found to be quantitative with 0.3-2.5M HNO₃ by 2.5^.10^-2M HDEHP and in the pH range 0.1-2.5 with 2.3^.10^-2M PIA-8 in toluene. U(VI) was completely extracted in the acidic range of 0.1-2.0M HNO₃ with 2.2^.10^-2M HDEHP and in the pH range of 1.0-3.0 with 2.0^.10^-2M PIA-8 in toluene. The probable extracted species have been ascertained by log D-log c plot as UO₂ R₂ ^.2HR with both the reagents and Th (NO₃)₂R₂ ^.2HR with PIA-8 and Th (NO₃)₃R^.3HR with HDEHP, respectively. Temperature dependence of the extraction equilibrium is examined by the temperature variation method. Separation of U(VI) and Th(IV) was also carried out from commonly associated metals.     

Potential cerebral perfusion agents. Synthesis and evaluation of new radioiodinated barbituric acid analogs

Two new ¹²⁵I-labeled barbituric acid analogs, 5-ethyl-5-(E-1-iodo-1-penten-5-yl)2-thiobarbituric acid ( 4 ) and 5-ethyl-5-( m -iodophenyl)barbituric acid ( 7 ), have been prepared and evaluated in rats as potential cerebral perfusion agents. Annulation of 2-ethyl-2-(E-1-iodo-1-penten-5-yl)malonate ( 3 ) with thiourea in the presence of sodium ethoxide gave the 5-ethyl-5-(E-1-iodo-1-penten-5-y1)-thiobarbituric acid ( 4 ). Diethyl 2-ethyl-2-phenyl-malonate was treated with thallium(III) trifluoroacetate followed by addition of aqueous potassium iodide to provide diethyl 2-ethyl-2-(m-iodophenyl)malonate ( 10 ). The malonic ester derivative 10 was condensed with urea in the presence of sodium hydride to give the desired 5-ethyl-5-(m-iodophenyl)barbituric acid ( 7 ), and a decarbethoxylation product, 2-(m-iodophenyl)butyric acid ( 11 ). Iodine-125-labeled 4 and 7 were synthesized in the same manner and the tissue distribution of these new agents evaluated in rats. Both [¹²⁵I] 4 and [¹²⁵I] 7 showed high brain uptake. Significant in vivo deiodination was detected with [¹²⁵I] 4 whereas [¹²⁵I] 7 was found to be stable to deiodination.     

Biosynthesis of the Verrucarins and Roridins. Part 1. The transformation of mevalonic acid into verrucarinic acid. Evidence for a hydrogen 1,2-shift. Verrucarins and roridins, 27th communication

Incorporation experiments using sodium [2-¹⁴C]-, [2-³H]-, (3R)-[5-¹⁴C]- and [2-³H, 2-¹⁴C]-mevalonates and with mevalonates stereospecifically tritiated at C(2) demonstrate the transformation of mevalonic acid ( 8 ) into verrucarinic acid ( 5 ). Degradation experiments showed that this transformation occurs with a hydrogen 1, 2-shift of the ‘pro-2R’ hydrogen atom of mevalonate to C(3) of verrucarinate. A possible mechanistic pathway is discussed.     

Synthesis and Circular Dichroism of Both Enantiomers of 2-deuterofluoroacetic acid ( Fluoro[2H1]acetic acid)

Sharpless epoxidation of (E)-1-(trimethylsilyl)[1-²H₁]oct-1-en-3-o1 ( 3a ) yielded (1S,2S,3S)- and (1R,2R,3R)-1-(trimethylsilyl)-1,2-epoxy[1-²H₁]octan-3-ols ( 4a and 4b , resp.) which were converted in three steps into (S)- and (R)-fluoro[ ²H₁]acetic acid ( 7a and 7b , resp.) in good yields. Their high isotopic and optical purity was established by ¹H- and ¹⁹F-NMR, mass, and circular-dichroism spectroscopy.     

Acid-catalyzed copolymerization of aspartic acid with ω-amino acid. -Biodegradability and Ca2+ chelating ability of poly(aspartic acid -Co- ω-amino acid)-

The polycondensation of L-aspartic acid (1) with various ω-amino acids (2) using phosphoric acid catalyst produced poly(succinimide-co-ω-amino acid)s (3), which was followed by alkali hydrolysis to poly(aspartic acid-co-ω-amino acid) (4). The Ca²⁺ chelating abilities of 4 depended on the content of comonomer unit in the copolymer and on the kind of amino acids. For the copolymer using 11-aminoundecanoic acid (2d) as a comonomer, the Ca²⁺ chelating ability was higher than that of poly(sodium acrylate). For poly(aspartic acid-co-6-aminocaproic acid) (4c), there was a tendency to increase according to the increase of 6-aminocaproic acid (2c) unit in the copolymer. The biodegradability of the copolymer in the case of 2c as a comonomer, evaluated by TOC measurement, was 63%, which was the highest degradability among the copolymers having different methylen length. The biodegradability of 4c decreased with increasing the 2c unit in 4c.     

Rosmarinic acid determination using biomimetic sensor based on purple acid phosphatase mimetic

A new heterodinuclear Fe(III)Zn(II) complex which mimics the active site of the hydrolytic enzyme red kidney bean purple acid phosphatase was synthesized and characterized by IR, CHN and X-ray crystallographic analyses. This complex, [Fe^IIIZn^II(μ-OH)bpbpmp-CH₃](ClO₄)₂, containing the ligand (H₂bpbpmp-CH₃ = {2-[bis(2-pyridylmethyl)aminomethyl]-6-[(2-hydroxy-5-methylbenzyl) (2-pyridyl-methyl) aminomethyl]-4-methyl-phenol}) was employed in the construction of a biomimetic sensor and used in the determination of rosmarinic acid in plant extract samples. The response parameters and optimization of the biomimetic sensor design were evaluated. The best performance of this sensor was obtained for 75:15:10% (w/w/w) of the graphite powder:nujol:Fe(III)Zn(II) complex, 0.1 mol L⁻¹ phosphate buffer solution (pH 7.5), 1.19 × 10⁻⁴ mol L⁻¹ hydrogen peroxide with frequency, pulse amplitude, and scan increment at 30 Hz, 100 mV, and 0.6 mV, respectively. The rosmarinic acid concentration was linear in the range of 2.98 × 10⁻⁵ to 3.83 × 10⁻⁴ mol L⁻¹ (r = 0.9991) with a detection limit of 2.30 × 10⁻⁶ mol L⁻¹. This biomimetic sensor demonstrated long-term stability (300 days; 900 determinations) and reproducibility, with a relative standard deviation of 12.0%. The recovery study of rosmarinic acid in plant extract samples gave values from 90.3 to 98.3% and the concentrations determined showed agreement when compared with those obtained using capillary electrophoresis at the 95% confidence level.     

Biosynthesis of phoslactomycins: cyclohexanecarboxylic acid as the starter unit

Phoslactomycins (PLMs) A-F, produced by actinomycetes are polyketide-type antibiotics derived from a hydroxycyclohexanecarboxylic acid or a cyclohexanecarboxylic acid starter unit. Feeding experiments with [2-¹³C]shikimic acid indicated that the C-18 carbon of PLMs comes from C-5 of shikimate. Further feeding studies of cis and trans-3-hydroxy[7-¹³C]cyclohexanecarboxylic acid, [7-¹³C]- and [²H₁₁]cyclohexanecarboxylic acid have suggested that the starter unit in the PLM biosynthesis is not cis-3-hydroxycyclohexanecarboxylate but cyclohexanecarboxylate and that PLM-B is produced initially, and subsequently converted to other analogs by hydroxylation and acylation.     

GLC-MS analysis of the fatty acids of the seed oil,triglycerides, and cyanolipid of Paulliania elegans (Sapindaceae) – a rich source of cis-13-eicosenoic acid (paullinic acid)

The fatty acids of the total lipids, triglycerides, and the cyanolipid of Paullinia elegans (Sapindaceae) have been analyzed as their methyl esters and 4,4-dimethyloxazoline derivatives by gas chromatography-mass spectrometry. It was shown that the gas chromatographic separation of the oxazoline derivatives was sufficient to ensure the correct identification of the monoenic fatty acid positional isomers. Stereochemistry of the double bonds has been confirmed by infrared and ¹³C-nuclear magnetic resonance (NMR) spectroscopy. cis-13-Eicosenoic Acid (Paullinic acid) (44.4%) and cis-11-octadecenoic acid (cis-vaccenic acid) (19.8%) were found to be the main components beside other monoenoic acid positional isomers. The cyanolipid of P. elegans was identified as 2,4-dihydroxy-3-methylenebutyronitrile derivative by IR, ¹H-NMR, ¹³C-NMR spectroscopy and was quantified by ¹H-NMR spectroscopy (71.4%).     

Synthesis, characterisation and complex forming ability towards ferric ions of oligo(ether-amide)s of Jeffamines ED and chelidamic acid

New chelating oligo(ether-amide)s (CA-PE)s containing chelidamic acid residues in the main chain were prepared by reacting chelidamic acid with Jeffamines ED^® in the presence of N,N^′-dicyclohexylcarbodiimide and 4-dimethylaminopyridine. A mixture of products having one or two polyether sequences with chelidamate end-groups was obtained. It was found spectrophotometrically that CA-PE polymers formed a complex with Fe³⁺ at pH 3-6 having a maximum absorbance in the 472-495 nm range. Fe³⁺ ion complexes of CA-PE were water soluble, except Fe³⁺-CA-PE₆₀₀. The stoichiometric ratio between chelidamic acid residues of oligo(ether-amide)s CA-PE and Fe³⁺ ions was found to be 2 at pH 5 by the method of shift of equilibrium. A hydroxypyridine structure of the chelidamic acid residues in the complex was suggested.     

Spectrophotometric study of the molybdenum(VI) chelate of flavon-3-ol-2'-sulfonic acid in strong acid solutions

Molybdenum(VI) reacts with flavon-3-ol-2'-sulfonic acid (HL) in strong acid solutions to form a 1:1 chelate which has a stability constant (log K) of 3.04 at 25°C and ionic strength (l) of 1.0. Beer's law is obeyed in the range 0.69–8.20μg Mo ml^-1 in 0.3 M perchloric acid; the molar absorptivity at 370 nm is 1.4 × 10⁴ l mol^-1 cm^-1.     

Voltammetric determination of hafnium with calconcarboxylic acid

The interaction of Hf(IV) with calconcarboxylic acid (1-(2-hydroxy-4-sulfo-1-naphtylazo)-3-naphtolic acid) was investigated by cyclic voltammetry varying various factors (pH, ionic strength, contents of ethanol and scan rate). Optimal conditions of Hf(IV) determination in the presence of calconcarboxylic acid were found: acetic buffer solution pH 2.6, scan rate 0.5 Vs⁻¹. The detection limit of Hf(IV) concentration was 2.46 × 10⁻⁷ mol L⁻¹. The influence of foreign ions on the Hf(IV) determination was studied. It was established that some metals like cadmium, nickel, zinc, copper and titanium could be determined with Hf(IV) simultaneously. The method of voltammetric determination of hafnium was tested on model solutions and used in the determination of Hf(IV) in terbium-base alloy.     

New polymer syntheses. LXVI. Copolyester of 4-hydroxybenzoic acid and 3-(4'-hydroxyphenoxy)benzoic acid or 4-(3'-hydroxyphenoxy)benzoic acid

Copolyesters of 4-hydroxybenzoic acid (HBA) and 3-(4'-hydroxyphenoxy)benzoic acid were prepared by two different procedures. Either the acetyl derivatives were polycondensed in bulk at temperatures up to 300°C or they were polycondensed in an inert reactions medium (Marlotherm-S) at 340°C. Two analogous series of copolyesters were synthesized from 4-acetoxybenzoic acid (4-HBA) and 4-(3'-acetoxyphenoxy)benzoic acid. The copolyesters were characterized by elemental analyses, inherent viscosities, ¹H- and ¹³C-NMR spectroscopy, WAXS and DSC measurements, and by optical microscopy. All copolyesters synthesized in solution were highly crystalline materials which were neither meltable nor soluble. Part of the copolyesters prepared by polycondensation in bulk were semi-crystalline, meltable, and soluble. The copolyester derived from 3-(4'-hydroxyphenoxy)benzoic acid proved to be thermotropic forming a nematic melt, whereas the isomeric copolyesters of 4-(3'-hydroxyphenoxy)benzoic acid only formed isotropic melts. © 1993 John Wiley & Sons, Inc.     

Simultaneous electrochemical detection of uric acid and ascorbic acid at a silver doped poly(glutamic acid) modified glassy carbon electrode

In this paper, the silver doped poly (L-glutamic acid) modified glassy carbon electrode (PLG-Ag/GCE) was fabricated through an electrochemical immobilization. The modified electrode was used for simultaneous determination of uric acid (UA) and ascorbic acid (AA) in 0.1 M phosphate buffer solutions (PBS). The cyclic voltammetric signals of UA and AA were well separated with a potential difference of 396 mV in pH 3.0 phosphate buffer solution. The linear calibration curves were obtained in the concentration range 5.00 × 10⁻⁷–1.00 × 10⁻⁴ M for UA and 8.00 × 10^-6–5.00 × 10⁻³ M for AA with the detection limits of 3 × 10⁻⁷ M and 4 × 10⁻⁶ M, respectively. The relative standard deviations were 1.3 and 1.0% for the determinations of UA and AA for 20 continuous measurements. The signal was highly stable and reproducible. This method was successfully applied to the determination of UA in human urine samples.     

Selective bromination of dihydroquinopimaric acid

The reaction of dihydroquinopimaric acid methyl ester with bromine was found to be chemo- and stereoselective. Regardless of the solvent (acetic acid, methanol, dioxane), bromination of the title compound with an equimolar amount of bromine occurs as electrophilic addition at the double C¹⁹=C²⁰ bond with formation of 14α-hydroxy- or 14α-methoxy-19R-bromo derivatives. The reaction with excess bromine (3 equiv) leads to the formation of 16S-bromo derivatives. The bromination process is accompanied by formation of epoxy bridge between the C¹⁴ and C²⁰ atoms. X-Ray analysis revealed two polymorphic modifications of (16S,19R)-16,19-dibromo-14β,20-epoxydihydroquinopimaric acid methyl ester.     

Synthesis and evaluation of new phosphonic,bisphosphonic and difluoromethylphosphonic acid monomers for dental application

Syntheses of novel 5-(methacryloyloxy)pentylphosphonic acid 1, 5-(methacryloyloxy)pentylidenebisphosphonic acid 2 and 1,1-difluoro-5-(methacryloyloxy)pentylphosphonic acid 3 are described. The ability of these monomers to adhere to hydroxyapatite was demonstrated using ³¹P CP-MAS NMR spectroscopy. Their copolymerization with N,N′-diethyl-1,3-bis(acrylamido)propane (DEBAAP) was investigated with photo differential scanning calorimetry. These mixtures exhibit a significantly higher reactivity than DEBAAP alone. Bisphosphonic acid 2 was shown to be significantly more reactive than monomers 1 and 3. Adhesive properties of these monomers were also studied. Adhesives based on bisphosphonic acid 2 and difluoromethylphosphonic acid 3 provide significantly higher dentin shear bond strength than the one based on phosphonic acid 1.     

Flow-injection spectrophotometric determination of ascorbic acid by reduction of vanadotungstophosphoric acid

Ascorbic acid may be determined spectrophotometrically at 360 nm based on reduction of vanadotungstophosphoric acid using flow-injection analysis. The carrier stream was distilled water and the reagent streams were buffer solution (pH 3.0), 1.735 × 10^?3 M dodecatungstophosphoric acid and 1.735 × 10^?3 M sodium vanadate. The injection rate was 80 h^?1. The calibration graph was linear up to 80 μg ml^?1 ascorbic acid and the relative standard deviation for the determination of 20 μg ml^?1 ascorbic acid was 1.5% (n=10). The detection limit was 1.0 μg ml^?1 ascorbic acid, based on an injection volume of 250 μl. The system was applied to the determination of ascorbic acid in vitamin C tablets.