Synthesis and structures of new C<Subscript>60</Subscript> fullerene derivatives containing carbonyl groups

The reactions of fullerene C₆₀ with substituted haloketones, including organophosphorus haloketones, in the presence of bases afforded new methanofullerenes containing carbonyl or carbonyl and acetal groups. The structures of the resulting compounds were established by spectroscopic methods. Their electrochemical reduction and oxidation were studied by cyclic voltammetry and ESR spectroscopy. The three-dimensional structures were calculated by the PM3 and DFT/PBE/TZ2P methods. Published in Russian in Izvestiya Akademii Nauk. Seriya Khimicheskaya, No. 6, pp. 1424–1429, June, 2005.     

Reactivity of fullerene C<Subscript>60</Subscript>

The results of a quantum-chemical study of the reactivity of fullerene C₆₀ in such reactions as polymerization (dimerization), cycloaddition, addition of valence-saturated molecules are presented. The mechanisms of these reactions are also discussed.     

Bis(Allyloxycarbonyl)methano derivatives of fullerene C<Subscript>60</Subscript>

Mono-, bis-, tris-, tetrakis-, and hexakis-substituted cyclopropanation products of fullerene C₆₀ with diallyl malonate were synthesized according to Bingel-Hirsch. Except for the monocyclopropanation product, all other adducts were isolated as mixtures of regioisomers.     

Aqueous dispersions of C<Subscript>60</Subscript> fullerene

Stable aqueous colloidal dispersions of C₆₀ fullerene are prepared. A solvatochromic effect is revealed upon the addition of C₆₀ solution in chlorobenzene to a water-acetone mixture.     

Nafion-based composite solid electrolytes containing carbon nanotubes

Nafion-based composite solid electrolytes containing multiwalled carbon nanotubes have been studied by impedance spectroscopy. The effect of carbon nanotube morphology on the proton conductivity of the composites has been estimated at low relative humidity. Surface modification of carbon nanotubes with acidic groups increases the proton conductivity.     

Synthesis of fullerene C<Subscript>60</Subscript> monoadducts. Cyclopropanation of C<Subscript>60</Subscript> with sulfonium ylides

3′H-Cyclopropa[1,9](C₆₀-I_h)[5,6]fullerene-3′-carboxylic acid can be synthesized in a good yield by cyclopropanation of fullerene C₆₀ with 2-(dimethyl-λ⁴-sulfanylidene)acetates provided that the ester residue is readily hydrolyzable in acid medium.     

Direct phosphorylation of fullerene C<Subscript>60</Subscript> with phosphine

Fullerene C₆₀ reacts with phosphine (PH3) under free radical initiation conditions (azobis(isobutyronitrile), xylene, 65°C, 6–11 h) to give in the presence of air oxygen functional oligofullerenes (yield up to 32%) containing functional groups of phosphinic and phosphonic acids.     

Synthesis and structures of C<Subscript>60</Subscript> fullerene chlorides

Systematic study of chlorination of fullerene C₆₀ with inorganic chlorides SbCl₅, VCl₄, MoCl₅, and KICl₄ was carried out. Higher chlorofullerenes, viz., T _h -C₆₀Cl₂₄, C₆₀Cl₂₈, C ₂-C₆₀Cl₃₀, and D _3d -C₆₀Cl₃₀, can be prepared depending on the temperature and time of chlorination. The molecular and crystal structures of C₆₀Cl₂₄⋅VOCl₃, C₆₀Cl₃₀⋅2CS₂, and C₆₀Cl₃₀O_1.22 were determined by single-crystal X-ray diffraction. Fullerenes C₆₀Cl₂₈ and C ₂-C₆₀Cl₃₀ were shown to be only kinetically stable, whereas D _3d -C₆₀Cl₃₀ is a thermodynamically stable product. Transformations of less chlorinated fullerenes into more chlorinated products are accompanied by substantial changes in the addition patterns. Published in Russian in Izvestiya Akademii Nauk. Seriya Khimicheskaya, No. 7, pp. 1608–1618, July, 2005.     

The structural-phase state of C<Subscript>60</Subscript>-C<Subscript>70</Subscript> fullerene mixtures

The structural and phase state of the C₆₀-C₇₀ system at various C₆₀/C₇₀ ratios in mixtures obtained by the vaporization of solutions in toluene at ∼98°C was studied by X-ray structure analysis, differential scanning calorimetry, and infrared spectroscopy. Solid solutions based on the face-centered cubic packing of C₆₀ are not formed in the C₆₀-C₇₀ system at C₇₀ contents from 0.5 to 50 wt %. The hexagonal close packing of a solid solution of C₆₀ in C₇₀ can be formed as a result of the thermally activated decomposition of the ternary crystal solvate in the C₆₀-C₇₀-C₆H₅CH₃ system. The structural state of multiphase mixtures formed under conditions far from equilibrium is characterized by a high degree of structure imperfection and greater ability to undergo oxidation compared with C₆₀ and C₇₀.     

Covalent binding of fullerene C<Subscript>60</Subscript> to pharmacologically important compounds

The cycloaddition of diazo compounds derived from α-tocopherol, betulinic acid, ursolic acid, and Trolox methyl esters to fullerene C₆₀ in the presence of a Pd(acac)₂-PPh₃-Et₃Al catalytic system was performed. The reactions of the diazo compounds derived from the above-mentioned pharmacologically important compounds with fullerene C₆₀ in the presence of the Pd(acac)₂-PPh₃-Et₃Al system (1: 2: 4) afford predominantly the previously inaccessible pyrazolinofullerenes. A change in the component ratio of the Pd(acac)₂-PPh₃-Et₃Al catalyst from 1: 2: 4 to 1: 4: 4 favors the formation of methanofullerenes exclusively.     

Synthesis and structure of allylated derivatives of fullerenes C<Subscript>60</Subscript> and C<Subscript>70</Subscript>

New chromatographically pure monoand hexamethanofullerenes C₆₀ and C₇₀ containing active allylic groups were synthesized by Bingel—Hirsch reaction. These compounds are promising for the studies of biological activity, as well as for obtaining on their basis new fullerenecontaining materials. The purity and composition of the synthesized compounds were confirmed by MALDI-TOF mass spectrometry and HPLC, their structure was established by ¹H and ¹³C NMR spectroscopy and X-ray diffraction.     

Production of composite electroplated nickel-fullerene C<Subscript>60</Subscript> coatings

Kinetic relationships of the deposition of composite electroplated coatings based on nickel with a disperse phase of C₆₀ fullerene were studied. The composition of the coatings was determined by secondary-ion mass spectrometry.     

The standard enthalpy of formation of fullerene chloride C<Subscript>60</Subscript>Cl<Subscript>30</Subscript>

A rotating-bomb calorimeter was used to measure the energy of combustion of crystalline fullerene chloride C₆₀Cl₃₀ · 0.09Cl₂, Δ_c U° = (?24474 ± 135 kJ/mol). The result was used to calculate the standard enthalpy of formation, Δ_f H° (C₆₀Cl₃₀, cr) = 135 ± 135 kJ/mol, and the C-Cl bond energy, 195 ± 5 kJ/mol. The C-X (X = F, F, Cl, and Br) bond energies in fullerene C₆₀ derivatives and other organic compounds are compared.     

Circular dichroism of optically active organometallic derivatives of fullerenes C<Subscript>60</Subscript> and C<Subscript>70</Subscript>

Palladium and platinum complexes of fulleienes C₆₀ and C₇₀ containing the axially chiral ligand (—)-BITIANP (BITIANP is 2,2’-bis(diphenylphosphino)-3,3’-bi(benzo[b]thiophene)) and pynolidino[60]fullerene bearing a planar chiral organometallic π-complex substituent in the heteiocyclic ring were studied by circular dichroism (CD) spectroscopy.     

Self-assembling of fullerene C<Subscript>60</Subscript> into (C<Subscript>60</Subscript>)<Subscript><Emphasis Type="Italic">n</Emphasis></Subscript> clasters in aromatic solvents

Self-assembling of fullerene C₆₀ into (C₆₀) _n clusters in aromatic solvents was studied. The role of the π-π interactions and dispersion forces in the (C₆₀) _n cluster formation in these media is demonstrated using the data on the solubility of fullerene C₆₀ in these solvents and their ionization potentials and also spectral characteristics of fullerene C₆₀ in the range of 326–340 nm in different solvents.     

Synthesis and EPR investigation of nitroxyl derivatives of fullerenes C<Subscript>60</Subscript> and C<Subscript>70</Subscript>

Nitroxide derivatives of C₆₀ and C₇₀ were obtained by [3+2] cycloaddition of 4-(4-azidophenyl)-2,2,5,5-tetramethyl-3-oxy-2,5-dihydroimidazol-1-oxyl to fullerenes. The products were isolated by TLC and studied by EPR and optical spectroscopy. Molecular rotation of the adducts was shown to slow down on successive addition of the nitroxides, rotational correlation times depending nearly linearly on the number of the nitroxides added. Investigation of photochemical stability of nitroxide derivatives of C₆₀ and C₇₀ in benzene-ethanol medium reveal that the dissolved oxygen quenches efficiently the excitation of nitroxide (λ = 250–400 nm). In the absence of oxygen photoexcitation converts nitroxides to diamagnetic products, presumably, hydroxylamines formed through the interaction with the solvent.     

Kinetics and products derived from C<Subscript>60</Subscript> fullerene radiolysis in toluene

C₆₀ fullerene was radiolyzed in toluene solution both in presence of air and in vacuum at four different radiation doses 12, 24, 36, 48 and 96 kGy. Clear evidences of the addition of benzyl radicals to the fullerene cage derive from FT-IR and C¹³-NMR spectra of the reaction product. In presence of air the interference of oxygen is evident in the FT-IR spectra and from the elemental analysis. A detailed analysis of the kinetics of the multiple addition of benzyl radicals to the fullerene cage was made spectrophotometrically with the determination of the addition rate constants at the each addition step and the average number of benzyl groups added to the fullerene cage as function of the radiation dose.     

Quantitative analysis of compression isotherms of fullerene C<Subscript>60</Subscript> Langmuir layers

The structure of fullerence C₆₀ Langmuir layers formed from a solution in cyclohexane has been determined from their compression isotherms. The layer structure, in particular, the size of formed aggregates, has been shown to depend on the initial surface concentration of fullerene. A quantitative model of the Langmuir layer has been proposed. Degrees of water surface coverage with fullerene (the initial one and that corresponding to the onset of one-phase state formation), intermolecular distances of fullerene in aquaaggregates, aggregation numbers, and distances between aquaaggregates have been found to play the role of the model parameters. Constants characterizing the structure of a stable monolayer have been determined on the basis of the formulated model.