给电子体在制备烯烃聚合NdCl_3载体催化剂中的作用

<正> Martin以无水稀土氯化物为载体,与磷酸三丁酯(TBP)在庚烷溶剂中反应制得LnCl_3/TBP/TiCl_4载体催化剂,其中以NdCl_3为载体的催化剂对乙烯聚合有很高活性,但对TBP的作用和载钛结构涉及较少。NdCl_3为链状晶体结构,不同于层状晶体结构的MgCl_2和TiCl_3(α和δ型)。我们对NdCl_3/EtOH/TiCl_4催化剂进行了较为详细的研究,并与MgCl_2/EtOH/TiCl_4催化剂进行比较,发现NdCl_3载体催化剂与MgCl_2载体     

TiCl_4/MgCl_2负载型烯烃聚合催化剂活性中心性质的研究

用乙酰氯淬灭法测定了TiCl_4/MgCl_2-AlR_3催化1-辛烯聚合体系的活性中心数,确定了不同助催化剂、外加给电子体等条件下聚合速率、活性中心数、增长速率常数等随聚合时间的变化。结合对产物分子量分布的分峰拟合研究,确定了催化剂上存在多种活性中心及其聚合特性的差别,并发现有机给电子体对某些活性中心有选择性作用,使其失活或改变性质。     

给电子体在丙烯聚合MgCl_2载体催化剂体系中的作用

研究了不同给电子体分别作为内给电子体(D_(in))和外给电子体(D_(ex))对MgCl_2载体催化剂体系活性和定向性能的影响。还讨论了D_(in)和D_(ex)的搭配作用。烷氧基硅烷、苯甲酸乙酯(EB)、邻苯二甲酸二异丁酯(DIBP)和2,2,6,6-四甲基哌啶(TMP)用作Dex,可以明显改善聚丙烯的等规度,而同时使催化活性大大降低。EB、DIBP和TMP用作D_(in)的效果则各不相同。烷氧基硅烷等D_(ex)提高等规度的作用是由于它们选择性地使无规活性中心失活大大高于等规活性中心。适当的D_(in)和D_(ex)搭配,可以获得兼具高活性和高定向性能的催化剂体系。     

后过渡金属催化烯烃可控/活性聚合的研究进展

烯烃活性聚合由于可以制备出预定分子量的窄分布聚合物,以及各种嵌段共聚物、末端功能化聚合物等而受到广泛关注.过渡金属催化的烯烃配位聚合反应活性高,催化剂性能可通过配体结构的修饰进行调节,聚合物微观结构易于调控,其活性聚合进一步拓展了对烯烃聚合物分子设计的手段,具有重要的意义.除了以钛、锆、钒等为金属中心的前过渡系催化剂之...     

修饰Al2O3负载的烯基取代茂金属催化体系催化乙烯聚合的研究

经过十几年的研究和开发,茂金属催化剂已经有了很大的发展,部分已经工业化,同时新的茂金催化体系仍然在不断地开发出来［１～４］．均相烯烃聚合催化剂经负载后能有效地改善所得聚合物的颗粒形态,并可用于气相聚合,同时也出现了许多新的聚合特征,这方面的研究一直是烯烃聚合催化剂研究领域的一个热点［５～８］．在负载型催化剂的制备时,通常用ＭＡＯ先对载体进行处理,然后再负载茂金属,这样ＭＡＯ的用量就很大．茂环上的取代基对聚合有较大的影响,许多聚合规律仍在探索之中．尽管硼化合物作为助催化剂的茂金属催化体系已经被应用…     

MgCl2晶型对丙烯聚合MgCl2载体催化剂活性的影响

The influence of MgCl₂ crystal modification (α- MgCl₂, β- MgCl₂ ) on theproperties of supported catalyst for propylene polymerization has been studied bymeans of XRPD, IR and DTA-TG. The structural difference and similarity between α- MgCl₂ and β- MgCl₂ was still reclined in its milling produCt withdiisobutyl phthalate and in the catalysts prepared from α- MgCl, and β-MgCl₂caaccers respectively. β-MgCl₂ supported catslyst gives higher activity and lowerstcreospedficity than α- MgCl₂. The catalyst prepared by using Mg(OEt)₂ as carrier shows higher activity and stereospecificity than both a-MgCl₂ and β-MgCl₂ sup-ported catalysts.     

TiCl_4/MgCl_2催化丙烯/1-辛烯共聚合研究

本文用TiCl_4/MgCl_2-Al(i-Bu)_3催化剂进行丙烯/1-辛烯共聚合,研究发现引入少量共聚单体1-辛烯时,能提高丙烯的聚合活性。30℃时,测得共聚合竟聚率为r_丙=5.63,r_辛=0.32。共聚物的结晶度和己烷不溶物含量随其1-辛烯含量的增加而迅速下降。X射线衍射及~(13)C-NMR测定结果表明,共聚物的己烷可溶部分为非结晶的无规共聚物,己烷不溶部分是具有镶嵌着半个1-辛烯单体单元的长嵌段聚丙烯链结构的结晶性共聚物。     

MoO_2Br_2体系催化丁二烯聚合中烯丙基卤素的作用

ＭｏＯ２Ｂｒ２－Ａｌ（ｉ－Ｂｕ）２ＯＰｈＣＨ３（－ｍ）体系催化丁二烯１，２－聚合过程中添加Ｃ３Ｈ５Ｘ（Ｘ＝Ｃｌ、Ｂｒ和Ｉ）对聚合物分子量有较好的调节作用，其中以Ｃ３Ｈ５Ｂｒ的调节作用最强，Ｍｎ从１７．５×１０５降至３．５×１０５，但对催化活性有一定的影响．在测定催化体系的ＵＶ光谱、（１３）Ｃ－ＮＭＲ谱、聚合活性和聚合动力学参数的基础上，讨论了Ｃ３Ｈ５Ｘ在催化体系中的行为．     

MgCl_2晶型对丙烯聚合MgCl_2载体催化剂活性的影响

ＭｇＣｌ_２晶型对丙烯聚合ＭｇＣｌ_２载体催化剂活性的影响张明辉，肖世镜中国科学院化学研究所，北京，１００８０）关键词丙烯聚合、ＭｇＣｌ２、载体催化剂近年来，有关ＭｇＣＩ。载体催化剂的研究报道和综述文章不少，但涉及载体晶型对催化剂结构性能的影响却少见．...     

PLASMA POLYMERIZATION OF ACETYLENE/CO_2/H_2

A study has been made on the plasma polymerization of acetylene/CO_2/H_2 in a capacitively coupled RF plasma. The monomer mixture yielded a crosslinked film with light brown color. A kinetic study is reported for the plasma polymer ization of acetylene/CO_2/H_2. The effects of discharge power level and reactor geometry on the rate of polymer formation are reported. The structure of the plasma polymer is investigated by IR study.     

VOCl_3/Et_3Al_2Cl_3/CCl_4溶剂体系催化乙烯丙烯共聚

本文以VOCl_3/Et_3Al_2Cl_3为催化剂,在CCl_4溶剂中进行乙烯共聚反应。在聚合过程中,发生一异常的颜色突变现象。颜色突变后,体系催化聚合生成分子量很低的产物。从聚合物的结构表征及机理探讨表明:颜色突变后,体系产生了新的活性中心,催化机理发生了转变——由配位机理转变为阳离子机理。     

(CH3)3SiCl/TiCl4 INITIATING SYSTEM FOR CATIONIC POLYMERIZATION OF 1,3-PENTADIENE

Cationic polymerizations of 1,3-pentadiene (PD) initiated by trimethylsilyl chloride (TMSCl) incombination with TiCl_4 were carried out in n-hexane at 30℃. The yield of polymer was greatly increased bythe addition of TMSCl, indicating that the TMSCl/TiCl_4 combination is an efficient initiating system for PDcationic polymerization. However, the introduction of TMSCl gave rise to a drop in the molecular weight ofthe polymer. Kinetic results demonstrated that the polymerization initiated by TMSCl/TiCl_4 is 4.5 times fasterthan that induced by TiCl_4 alone. Various ethers were used to mediate the TMSCl/TiCl_4 initiating system.Adding diphenyl ether could increase both the yield and molecular weight of the polymer. Structural evidenceillustrates that the polymerization is indeed initiated by TiCl_4 in combination with HCl resulting fromhydrolysis by adventitious water.     

STUDIES ON TiCI4/Mg (OEt)_2/EB SUPPORTED CATALYSTS FOR PROPYLENE POLYMERIZATION

The supported catalysts for propylene polymerization were prepared by milling Mg (OEt)_2 with EB (ethylbenzoate) and treating with TiCl_4 solution. When TiCl_4/(Mg(OEt)_2/EB) (mol.) ratio was increased, decrease in contents of-OEt and Ti of the catalysts was observed, while the content of EB increased. It is proved by analyses of IR, X-ray and XPS that during co-milling Mg(OEt)_2 with EB no reactions have taken place. But after treatment with TiCl_4 solution, Mg(OEt)_2 converts into MgCl_2 and EB coordinates on the resulting MgCl_2 carrier, a surface complex forms.The activity of catalysts,isotacticity and vicosimetric molecular weight of polypropylene increase with the decrease of the content of ethoxyl group. The kinetic curves of propene polymerization obtained with present catalysts system display decay curves. It is found from the triad tacticity calculated from the expanded spectra of methyl carbon region that, ethoxyl group in catalyst has an effect on the configuration of polymer chain.     

丁二烯聚合铁系催化剂的磁性分析

丁二烯聚合铁系催化剂FeCl_3-Phen-Al(i-Bu)_3的磁化率和紫外可见光谱测定结果表明,三氯化铁与乙酸乙酯(EA)形成高自旋络合物FeCl_3·(EA)_2;FeCl_3·(EA)_2-Al(i-Bu)_3体系显强铁磁性;Phen有稳定Fe(Ⅱ)、显著降低铁磁性的作用。     

POISONING OF ACTIVE SITES ON ZIEGLER-NATTA CATALYST FOR PROPYLENE POLYMERIZATION

The effects of poisoning materials on catalytic activity and isospecificity of the supported Ziegler-Natta catalyst were investigated.A minor amount of simple structure of Lewis base,i.e.,methanol,acetone,ethyl acetate,was introduced into the catalyst slurry for partial poisoning catalytic active centers.It was found that the variations in deactivation power were in the order of methanol>acetone>ethyl acetate.The kinetic investigation via stopped-flow polymerization showed that poisoning compounds caused...     

AlCl3(ZnCl2,MgCl2)对Sm2O3的氯化效果及电化学行为

研究了AlCl₃(ZnCl₂、MgCl₂)对Sm₂O₃的氯化效果以及Sm₂O₃在LiCl-KCl-AlCl₃(ZnCl₂、MgCl₂)熔盐体系中的电化学行为。在LiCl-KCl-Sm₂O₃熔盐中加入AlCl₃(ZnCl₂、MgCl₂)后,ICP测量结果表明,AlCl₃体系中Sm(Ⅲ)离子的浓度最高,并且在923 K时达到最大值;固相反应表明,AlCl₃氯化Sm₂O₃生成SmCl₃,而Sm₂O₃和ZnCl₂(MgCl₂)反应生成SmOCl。电化学行为表明,AlCl₃体系中观察到了两种Al-Sm的合金峰,而ZnCl₂体系中只观察到Zn-Sm金属间化合物的形成峰,MgCl₂体系中没有形成合金。在-6.25 A·cm^-2下,W电极上恒电流电解2 h获得了Al-Li-Sm合金,经XRD分析,合金为Al₂Sm相。     

AlCl3(ZnCl2,MgCl2)对Sm2O3的氯化效果及电化学行为

研究了AlCl_3(ZnCl_2、MgCl_2)对Sm_2O_3的氯化效果以及Sm_2O_3在Li Cl-KCl-AlCl_3(ZnCl_2、MgCl_2)熔盐体系中的电化学行为。在Li Cl-KCl-Sm_2O_3熔盐中加入AlCl_3(ZnCl_2、MgCl_2)后,ICP测量结果表明,AlCl_3体系中Sm(Ⅲ)离子的浓度最高,并且在923 K时达到最大值;固相反应表明,AlCl_3氯化Sm_2O_3生成SmCl_3,而Sm_2O_3和ZnCl_2(MgCl_2)反应生成Sm OCl。电化学行为表明,AlCl_3体系中观察到了两种Al-Sm的合金峰,而ZnCl_2体系中只观察到Zn-Sm金属间化合物的形成峰,MgCl_2体系中没有形成合金。在-6.25 A·cm~(-2)下,W电极上恒电流电解2 h获得了Al-Li-Sm合金,经XRD分析,合金为Al_2Sm相。     

Ethylene/1-hexene copolymerization with TiCl4/MgCl2/AlCl3 catalyst in the presence of hydrogen

A TiCl₄/AlCl₃/MgCl₂ (Cat-B) catalyst containing 5.2 wt.% Al was prepared by the reaction of TiCl₄ with ethanol adduct of AlCl₃/MgCl₂ mixture. A TiCl₄/MgCl₂ catalyst (Cat-A) without doped AlCl₃ was also prepared by the same method. Ethylene-1-hexene copolymerization catalyzed by Cat-B in the presence of hydrogen showed slightly higher efficiency and higher 1-hexene incorporation than Cat-A. Comonomer incorporation was markedly increased when the cocatalyst AlEt₃ was replaced by Al(i-Bu)₃. Adding Ph₂Si(OMe)₂ as external donor in the catalyst system caused decrease in polymerization activity and 1-hexene incorporation. Each copolymer sample was fractionated into three fractions: n-heptane insoluble fraction (fraction A), n-heptane soluble and n-hexane insoluble fraction (fraction B) and n-hexane soluble fraction (fraction C). In most cases the amount of intermediate fraction (fraction B) was smaller than the other fractions and did not increase as the total 1-hexene content increase, indicating the presence of two classes of copolymer fractions with greatly different comonomer content and clear bimodality of the copolymer composition distribution. Doping AlCl₃ in the catalyst, changing cocatalyst and adding external donor mainly changed the weight ratio of fraction A to fraction C, but exerted little influences on their composition. According to the sequence distribution data of the fractions, doping AlCl₃ in the catalyst resulted in slight decrease of product of reactivity ratios (r₁r₂) in both fraction A and fraction C.     

引发甲基丙烯酸甲酯聚合的聚丙烯酰胺－氯化铜配合物膜催化剂表征

考察甲基丙烯酸甲酯在室温Ｎａ２ＳＯ３水溶液的聚合能力，发现在该溶液添加聚丙烯酰胺（ＰＡＡｍ）－氯化铜（ＣｕＣｌ２）配合物膜以组成ＰＡＡｍ－ＣｕＣｌ２膜／Ｎａ２ＳＯ３催化引发系是必不可少的，采用ＥＳＲ、ＩＲ、ＸＰＳ和电导率等手段研究该体系催化剂的表面结构，结果表明，膜的单位面积平均含铜量在一定范围内和配位体种类等对催化活性有显著影响，即催化性能与催化剂的表面结构紧密相关。     

γ-Al2O3对SCR脱硝催化剂V2O5-WO3/TiO2的改性研究

采用溶胶凝胶法制备了不同γ-Al₂O₃含量的钛铝复合载体,以此为载体采用浸渍法负载V₂O₅和WO₃制备了一系列催化剂。采用X射线衍射(XRD)、比表面积测定(BET)、程序升温还原(H₂-TPR)、高分辨率透射电子显微镜(HRTEM)等表征技术对催化剂表面形态进行分析,同时在模拟氨气选择性催化还原NO(NH₃-SCR)的反应条件下,对催化剂的脱硝反应活性和SO₂抗中毒进行考察。结果发现,TiO₂和γ-Al₂O₃之间的协同作用使得V₂O₅-WO₃/TiO₂-γ-Al₂O₃催化剂的脱硝效率及活性窗口明显优于单一载体制备的催化剂,表现出了良好的热稳定性和抗SO₂毒化能力,特别是V₂O₅-WO₃/TiO₂-15% γ-Al₂O₃在310~460 ℃,NO的转化率均在80%以上,反应窗口最宽。各种表征结果表明,TiO₂-γ-Al₂O₃复合载体中γ-Al₂O₃高度分散在TiO₂上,复合载体具有较大的比表面积,同时具有较强的还原能力。