Mass-transfer in pertraction of butyric acid by phosphonium ionic liquids and dodecane

Transport of butyric acid (BA) through a supported liquid membrane (SLM) containing phosphonium ionic liquid (IL) Cyphos IL-104 and dodecane occurs by two mechanisms. The first is related to the physical solubility of undissociated acid in dodecane in the form of a monomer or dimer and the second to the reactive extraction of acid by IL. Although the model of pertraction indicates that increasing the mean concentration of acid in the feed, c _F,lmv, increases the participation of pertraction based on the physical solubility; in the tested range of c _F,lmv from 0 kmol m⁻³ to 0.45 kmol m⁻³ it does not play an important role and at the highest c _F,lmv value, less than 10 % of the overall BA transport were achieved. The presence of IL in SLM considerably increases the value of the overall mass transfer coefficient in pertraction at low BA concentrations. However, at c _F,lmv > 0.4 kmol m⁻³ its values are similar for SLMs with and without IL. Compared to lactic acid, the pertraction of BA through the same SLM is about five times faster. Reactive transport of BA is connected with the back transport of water via reverse micelles decomposition and formation on the extraction and stripping interfaces.     

Fluorescence study on the domain formation of <Emphasis Type="Italic">N</Emphasis>-dodecanoyl-<Emphasis Type="SmallCaps">l</Emphasis>-tryptophan within a liposome membrane

The aggregation behavior of N-dodecanoyl-l-tryptophan within a liposome membrane was investigated by fluorescence spectroscopy. Liposomes with a mean diameter of 100 nm, formed from either 1-2-dilauroyl-sn-glycero-3-phosphocholine, 1-2-myristoyl-sn-glycero-3-phosphocholine, or 1-2-palmitoyl-sn-glycero-3-phosphocholine, were used. Fluorescence measurements indicate that the sodium salt of N-dodecanoyl-l-tryptophan forms domains with the liposome membranes below the main phase transition temperature, T _m. Above T _m, the molecules are homogeneously dispersed in the liquid crystalline state of the membranes.     

LC-MS-MS Determination of Cyclo{(2S)-2-amino-8-[(aminocarbonyl)hydrazono] decanoyl-1-l-tryptophyl-l-isoleucyl-(2R)-2-piperidinecarbonyl} a Novel Histone Deacetylase Inhibitor in Rat Serum

A rapid and sensitive liquid chromatography-tandem mass spectrometry assay was developed for the determination of a novel histone deacetylase inhibitor, cyclo{(2S)-2-amino-8-[(aminocarbonyl)hydrazono]decanoyl-1-l-tryptophyl-l-isoleucyl-(2R)-2-piperidinecarbonyl} (SD-2007), in rat serum. The mobile phase consisted of acetonitrile and ammonium formate (10 mM) (85:15 v/v), and the flow rate was 0.25 mL min⁻¹. Chromatographic separations were achieved by isocratic elution on a C₁₈ column. Multiple reaction monitoring was based on the transition of m/z = 681.8 → 83.6 for SD-2007 and 372.1 → 176.1 for trazodone (internal standard). A linearity was observed over a concentration range from 2 to 1,000 ng mL⁻¹ (r ² > 0.999), with the lower limit of quantification at 2 ng mL⁻¹ with 100 μL of rat serum. The mean intra- and inter-day assay accuracy ranged from 98.5–109.7% to 95.2–102.7%, respectively, and the mean intra- and inter-day precision was between 4.3–11.3% and 2.9–13.3%. The developed assay was applied to a pharmacokinetic study of SD-2007 in rats after intravenous injection (dose 4 mg kg⁻¹).     

LC–ESI–MS for Rapid and Sensitive Determination of Aripiprazole in Human Plasma

A rapid, sensitive, and accurate high-performance liquid-chromatographic–mass spectrometric (HPLC–MS) method, with estazolam as internal standard, has been developed and validated for determination of aripiprazole in human plasma. After liquid–liquid extraction the compound was analyzed by HPLC on a C₁₈ column, with acetonitrile—30 mm ammonium acetate containing 0.1% formic acid, 58:42 (v/v), as mobile phase, coupled with electrospray ionization mass spectrometry (ESI-MS). The protonated analyte was quantified by selected-ion recording (SIR) with a quadrupole mass spectrometer in positive-ion mode. Calibration plots were linear over the concentration range 19.9–1119.6 ng mL⁻¹. Intra-day and inter-day precision (CV%) and accuracy (RE%) for quality-control samples (37.3, 124.4, and 622.0 ng mL⁻¹) ranged between 2.5 and 9.0% and between 1.3 and 3.5%, respectively. Extraction recovery of aripiprazole from plasma was in the range 75.8–84.1%. The method enables rapid, sensitive, precise, and accurate measurement of the concentration of aripiprazole in human plasma.     

Solubility of Carbon Dioxide in Aqueous Mixtures of DIPA + MDEA and DIPA + PZ Solutions

The new data for solubility of carbon dioxide are reported in mixed solvents containing (2.00 to 2.50 kmol/m³) Diisopropanolamine (DIPA), (0.86 to 1.36) kmol/m³) Piperazine (PZ), (0.86 to 1.36) kmol/m³) N‐methyldiethanolamine (MDEA) and water, keeping the amine total concentration in the aqueous solution at 3.36 kmol/m³ for temperatures from (40 to 70) °C and CO₂ partial pressures in the range of (30 to 5000) kPa. Experimental solubility results were represented by the mole ratio of CO₂ per total amine in the liquid mixture. Results show that at a given partial pressure of CO₂ the solubility of CO₂ in the DIPA solutions is lower than solubility in MDEA or PZ solutions and the CO₂ loading increased with decreasing temperature and increasing CO₂ partial pressure.     

Application of a Validated, Stability-Indicating LC Method to Stress Degradation Studies of Ramipril and Moexipril.HCl

A stability-indicating reversed-phase liquid chromatographic (RPLC) method has been established for analysis of ramipril (RAM) and moexipril hydrochloride (MOEX.HCl) in the presence of the degradation products generated in studies of forced decomposition. The drug substances were subjected to stress by hydrolysis (0.1 m NaOH and 0.1 m HCl), oxidation (30% H₂O₂), photolysis (254 nm), and thermal treatment (80 °C). The drugs were degraded under basic and acidic conditions and by thermal treatment but were stable under other stress conditions investigated. Successful separation of the drugs from the degradation products was achieved on a cyanopropyl column with 40:60 (v/v) aqueous 0.01 m ammonium acetate buffer (pH 6)–methanol as mobile phase at a flow rate of 1 mL min⁻¹. Detection was by UV absorption at 210 nm. Response was a linear function of concentration over the range 5–50 μg mL⁻¹ (r > 0.9995), with limits of detection and quantitation (LOD and LOQ) of 0.04 and 0.09 μg mL⁻¹, respectively, for RAM and 0.014 and 0.32 μg mL⁻¹, respectively, for moexipril. The method was validated for specificity, selectivity, solution stability, accuracy, and precision. Statistical analysis proved the method enabled reproducible and selective quantification of RAM and MOEX as the bulk drug and in pharmaceutical preparations. Because the method effectively separates the drugs from their degradation products, it can be used as stability-indicating.     

Effect of viscosity of a liquid membrane containing oleyl alcohol on the pertraction of butyric acid

Solvent formulation is important in the optimization of the mass-transfer through supported liquid membranes (SLM) in pertraction and membrane extraction. Oleyl alcohol (OA) is frequently used as the solvent or diluent in the extraction of carboxylic acids. A disadvantage of OA is its relatively high viscosity of 28.32 mPa s at 25°C. This can be decreased by the application of a less viscous OA diluent, e.g. dodecane. The relationship between the ratio of the distribution coefficient of butyric acid (BA), D _F, and the viscosity of OA-dodecane solvents, µ, as extraction and transport characteristics, and the overall mass-transfer coefficient, K _p, through SLMs was analyzed. Dependence of the D _F/µ ratio on the OA concentration showed a maximum at the OA concentration of 15 mass % to 30 mass %. The OA concentration dependence of K _p for SLMs exhibited also a maximum at about 30 mass % and 20 mass % of OA at the BA concentration driving force of 0.12 kmol m^?3 and 0.3 kmol m^?3, respectively. Shifting of the maximum in K _p dependences towards lower OA concentrations by increasing the BA concentration driving force is in agreement with the D _F/µ ratio dependence. Using pure OA as the solvent or diluent is not preferable and a mixture of a low viscosity diluent with the OA concentration below 40 mass % should be used. The presented results show the potential of the D _F/µ ratio in the screening and formulation of solvents in extraction and SLM optimization.     

Mechanistic Study on the Oxidation of Promazine and Chlorpromazine by Hexaimidazolcobalt(III) in Acidic Aqueous Media

The kinetics of the oxidation of promazine and chlorpromazine by hexaimidazolcobalt(III) were studied in the presence of a large excess of cobalt(III) and H⁺ ions using u.v.–vis. spectroscopy ([Co^III] = (1–6) × 10⁻³ m, [ptz] = (2.5–10) × 10⁻⁵ m, [H⁺] = 0.05–0.8 m, I = 1.0 m (H⁺, Na⁺, Cl⁻), T = 333–353 K, l = 1 cm). In each case, the reversible reaction leads to formation of cobalt(II) species and a stable cationic radical. A linear dependence of the pseudo-first-order rate constant (k_obs) on [Co^III] with a non-zero intercept was established for both phenothiazine derivatives. A marked difference in the observed reaction rate for promazine and chlorpromazine is associated with the difference in its ability to undergo oxidation and is consistent with a trend in the redox potential changes for these reductants. The activation parameters for reactions studied were determined. Mechanistic consequences of all the results are discussed.     

Agitation of a gas-solid-liquid system in a vessel with high-speed impeller and vertical tubular coil

Experimental results of gas hold-up, power consumption and residence time of gas bubbles in a gas-solid-liquid system produced in an agitated vessel equipped with a high-speed impeller and a vertical tubular coil are presented in this paper. Critical agitator speed, needed for the dispersion of gas bubbles and solid particles in liquid were also identified. The studies were carried out in an agitated vessel of the inner diameter D = 0.634 m and the working liquid volume of about 0.2 m³. A tubular coil of the diameter of 0.7D, consisting of 24 vertical tubes of the diameter of 0.016D, was located inside the flat-bottomed vessel. The agitated vessel was equipped with a Rushton turbine with six blades or an A 315 impeller with four blades. Both impellers had diameter, d, equal to 0.33D. The vessel was filled with liquid up to the height H = D. In this study, air and particles of sea sand with the mean diameter of 335 μm and the concentration of up to 3.0 mass % were dispersed in distilled water as the liquid phase. The measurements were carried out within the turbulent regime of the fluid flow in the agitated vessel. Results of the measurements were processed graphically and mathematically. Lower values of the critical agitator speed, n _JSG, needed for simultaneous dispersion of gas bubbles and particles with the solids concentration from 0.5 mass % to 2 mass %, were obtained for the vessel equipped with the A 315 impeller. Higher values of the specific power consumption were reached for the vessel with the Rushton turbine. Higher values of the gas hold-up and residence time of the gas bubbles in the fluid were obtained for the system equipped with the Rushton turbine. Results of the gas hold-up as a function of the specific power consumption, superficial gas velocity and solids concentration were approximated with good accuracy using Eq. (5).     

Statistical and evolutionary optimisation of operating conditions for enhanced production of fungal <Emphasis Type="SmallCaps">l</Emphasis>-asparaginase

A three-level central composite design of the Response Surface Methodology and the Artificial Neural Network-linked Genetic Algorithm were applied to find the optimum operating conditions for enhanced production of l-asparaginase by the submerged fermentation of Aspergillus terreus MTCC 1782. The various effects of the operating conditions, including temperature, pH, inoculum concentration, agitation rate, and fermentation time on the experimental production of l-asparaginase, were fitted to a second-order polynomial model and non-linear models using Response Surface Methodology and the Artificial Neural Network, respectively. The Artificial Neural Network model fitted well, achieving a higher coefficient of determination (R ² = 0.999) than the second-order polynomial model (R ² = 0.962). The l-asparaginase activity (38.57 IU s mL⁻¹) predicted under the optimum conditions of 32.08°C, pH of 5.85, inoculum concentration of 1 vol. %, agitation rate of 123.5 min⁻¹, and fermentation time of 55.1 h was obtained using the Artificial Neural Networklinked Genetic Algorithm in very close agreement with the activity of 37.84 IU mL⁻¹ achieved in confirmation experiments.     

Gene Cloning,Expression, and Characterization of a Family 51 α-<Emphasis Type="SmallCaps">l</Emphasis>-Arabinofuranosidase from <Emphasis Type="Italic">Streptomyces</Emphasis> sp. S9

An α-l-arabinofuranosidase gene, abf51S9, was cloned from Streptomyces sp. S9 and successfully expressed in Escherichia coli BL21 (DE3). The full-length gene consisted of 1,506 bp and encoded 501 amino acids with a calculated mass of 55.2 kDa. The deduced amino acid sequence was highly homologous with the α-l-arabinofuranosidases belonging to family 51 of the glycoside hydrolases. The recombinant protein was purified to electrophoretic homogeneity by Ni-NTA affinity chromatography and subsequently characterized. The optimal pH and temperature for the recombinant enzyme were 6.0 and 60∼65 °C, respectively. The enzyme showed a broad pH range of stability, retaining over 75% of the maximum activity at pH 5.0 to 11.0. The specific activity, K _m, and V _max with p-nitrophenyl-α-l-arabinofuranoside as substrate were 60.0 U mg⁻¹, 1.45 mM, and 221 μmol min⁻¹ mg⁻¹, respectively. Abf51S9 showed a mild but significant synergistic effect in combination with xylanase on the degradation of oat-spelt xylan and soluble wheat arabinoxylan substrates with a 1.19- and 1.21-fold increase in the amount of reducing sugar released, respectively. These favorable properties make Abf51S9 a good candidate in various industrial applications.     

<Superscript>99m</Superscript>Tc-labeling and molecular modeling of short dipeptide glycyl-<Emphasis Type="SmallCaps">l</Emphasis>-proline

Glycyl-l-proline (Gly-l-Pro) is the main degradation product of collagen and is a good diagnostic tool in various pathological conditions. The aim of this work was to prepare dipeptide Gly-l-Pro labeled with ^99mTc. Complex preparation was carried out under alkaline reaction conditions and its stability was assessed 10 and 120 min after preparation. The formation of two types of complex compounds was observed. High-performance liquid chromatography, paper electrophoresis, paper chromatography and thin layer chromatography were employed to monitor the formation of different complexes. Molecular modeling (semi-empirical method) was used to design their structure and composition. First complex cI with formula [TcO(Gly-l-Pro)]⁻¹ is unstable. After 120 min cI is completely transformed to complex cII with formula Tc(Gly-l-Pro)₃.     

Solvent Effects on Particle Formation in Hydrolysis of Tetraethyl Orthosilicate

Particle formation in ammonia-catalyzed hydrolysis of tetraethyl orthosilicate (TEOS) was studied in aqueous solvents that contained ethanol, 1-propanol or 1-butanol. The reactions were performed at a TEOS concentration of 0.2 kmol/m³, a H₂O concentration of 5 kmol/m³ and a NH₃ concentration of 1 kmol/m³. Average particle size was the largest for 1-butanol and the smallest for ethanol. No specific relation of the average diameter to hydrolysis rate was observed in the reactions. Difference in dielectric constant of the solvent and particle surface potential in the reactions indicated that the magnitudes of interparticle repulsion in the solvents corresponded with the order of the average particle sizes. This suggested that the particle sizes were dominated by the interparticle repulsion.     

Separation ofN-carbamoyl aspartate andl-dihydroorotate from serum by high-performance liquid chromatography with fluorimetric detection

Summary A high-performance liquid chromatographic method, with 9-anthryldiazomethane as derivatizing agent, has been developed for the simultaneous determination ofN-carbamoyl aspartate andl-dihydroorotate in serum. Sample preparation for 1 mL serum was by simple liquid-liquid extraction and then derivatization. The compounds were separated on a Luna C18(2) column by use of a gradient prepared from acetonitrile and 10 mM sodium acetate buffer, pH 6.0, and fluorimetric detection was performed at excitation and emission wavelengths of 365 nm and 412 nm, respectively. The response was found to be linearly dependent on concentration between 0.8 and 60 μg mL⁻¹ forl-dihydrooratate and between 0.9 and 90 μg mL⁻¹ forN-carbamoyl aspartate; the mean recovery rates were 50 and 51%, respectively. The limits of detection and quantification were 0.33 μg mL⁻¹ and 0.6 μg mL⁻¹, respectively, forl-dihydroorotate and 0.4 μg mL⁻¹ and 0.7 μg mL⁻¹ forN-carbamoyl aspartate. This method can be used to assess accumulation ofN-carbamoyl aspartate andl-dihydroorotate in body fluids in situations where cellular pyrimidine de novo synthesis is impaired.     

The electrochemical polymerization of <Emphasis Type="Italic">o</Emphasis>-phenylenediamine on <Emphasis Type="SmallCaps">l</Emphasis>-tyrosine functionalized glassy carbon electrode and its application

The polymerization of o-phenylenediamine (OPD) on l-tyrosine (Tyr) functionalized glassy carbon electrode (GCE) and its electro-catalytic oxidation towards ascorbic acid (AA) had been studied in this report. l-Tyrosine was first covalently grafted on GCE surface via electrochemical oxidation, which was followed by the electrochemical polymerization of OPD on the l-tyrosine functionalized GCE. Then, the poly(o-phenylenediamine)/l-tyrosine composite film modified GCE (POPD-Tyr/GCE) was obtained. X-ray photo-electron spectroscopy (XPS), field emission scanning electron microscope (SEM), and electrochemical techniques have been used to characterize the grafting of l-tyrosine and the polymerization and morphology of OPD film on GCE surface. Due to the doping of the carboxylic functionalities in l-tyrosine molecules, the POPD film showed good redox activity in neutral medium, and thus, the POPD-Tyr/GCE exhibited excellent electrocatalytic response to AA in 0.1 mol l⁻¹ phosphate buffer solution (PBS, pH 6.8). The anode peak potential of AA shifted from 0.58 V at GCE to 0.35 V at POPD-Tyr/GCE with a greatly enhanced current response. A linear calibration graph was obtained over the AA concentration range of 2.5 × 10⁻⁴–1.5 × 10^–3 mol l⁻¹ with a correlation coefficient of 0.9998. The detection limit (3δ) for AA was 9.2 × 10⁻⁵ mol l⁻¹. The modified electrode showed good stability and reproducibility and had been used for the determination of AA content in vitamin C tablet with satisfactory results.     

Enthalpy characteristics of dissolution of <Emphasis Type="SmallCaps">l</Emphasis>-cysteine and <Emphasis Type="SmallCaps">l</Emphasis>-asparagine in aqueous solutions of acetonitrile and dimethyl sulfoxide at 298.15 K

The integral enthalpies of dissolution Δ_sol H ^m of l-cysteine and l-asparagine in mixtures of water with acetonitrile and dimethyl sulfoxide at the concentration of organic solvent up to 0.32 molar fractions were measured by means of dissolution calorimetry. The standard enthalpies of dissolution (Δ_sol H°) and transfer (Δ_trans H°) of the amino acids from water to a mixed solvent were calculated. The enthalpy coefficients of pair interactions for L-cysteine and L-asparagine with cosolvent molecules are positive, except for the L-asparagine-water-acetonitrile system. The concepts on the prevailing effect of specific interactions in solutions and the influence of the nature of the cosolvents and lateral substituents of the amino acids on the thermochemical characteristics of dissolution were used to explain the data obtained.     

Design of silica microparticles with oligopeptide brushes and their interaction with proteins

Synthesis of small oligopeptide brushes (oligo(S-benzyl-l-cysteine)) onto polyelectrolyte functionalized silica microparticles was developed. Poly(vinyl amine) (PVAm) adsorbed from salt-free and KCl 10⁻¹ mol L⁻¹ aqueous solution onto silica microparticles was chemically and naturally cross-linked by epichlorohydrin and CO₂, respectively. After the adsorption of PVAm onto microporous silica particles and stabilization by cross-linking, five repeated coupling reactions of Boc-S-benzyl-l-cysteine were performed. To test the protein interactions with the newly designed surface, human serum albumin (HSA) has been selected as a model protein. X-ray photoelectron spectroscopy, total organic carbon, potentiometric and polyelectrolyte titrations, and electrokinetic analysis were employed to obtain information about the polyelectrolyte adsorption and the amount of the amino acid S-benzyl-l-cysteine that was covalently bound to the solid surface and for determination of the protein amount adsorbed onto functionalized surface. The amount of HSA adsorbed onto modified silica microparticles decreased in order: silica/PVAm-cross-linked (silica/PVAm-C) (8.00 mg g⁻¹) > silica/PVAm-C/S-benzyl-l-cysteine (6.34 mg g⁻¹) > silica (4.86 mg g⁻¹) > silica/PVAm-C/(S-benzyl-l-cysteine)₅ (1.86 mg g⁻¹).     

Kinetic and mechanistic studies on the electron-transfer reactions between diaquabisethylenediaminecobalt(III) and ethylenediaminetetraacetatocobaltate(III) with promazine in acidic aqueous media

The kinetics of the electron-transfer reactions between promazine (ptz) and [Co(en)₂(H₂O)₂]³⁺ in CF₃SO₃H solution ([Co^III] = (2–6) × 10⁻³ m, [ptz] = 2.5 × 10⁻⁴ m, [H⁺] = 0.02 − 0.05 m, I = 0.1 m (H⁺, K⁺, CF₃SO ₃ ⁻ ), T = 288–308 K) and [Co(edta)]⁻ in aqueous HCl ([Co^III] = (1 − 4) × 10⁻³ m, [ptz] = 1 × 10⁻⁴ m, [H⁺] = 0.1 − 0.5 m, I = 1.0 m (H⁺, Na⁺, Cl⁻), T = 313 − 333 K) were studied under the condition of excess Co^III using u.v.–vis. spectroscopy. The reactions produce a Co^II species and a stable cationic radical. A linear dependence of the pseudo-first-order rate constant (k _obs) on [Co^III] with a non-zero intercept was established for both redox processes. The rate of reaction with the [Co(en)₂(H₂O)₂]³⁺ ion was found to be independent of [H⁺]. In the case of the [Co(edta)]⁻ ion, the k _obs dependence on [H⁺] was linear and the increasing [H⁺] accelerates the rate of the outer-sphere electron-transfer reaction. The activation parameters were calculated as follows: ΔH ^≠ = 105 ± 4 kJ mol⁻¹, ΔS ^≠ = 93 ± 11 J K⁻¹mol⁻¹ for [Co(en)₂(H₂O)₂]³⁺; ΔH ^≠ = 67 ± 9 kJ mol⁻¹, ΔS ^≠ = − 54 ± 28 J K⁻¹mol⁻¹ for [Co(edta)]⁻.     

A kinetic study of the oxidation of <Emphasis Type="SmallCaps">l</Emphasis>-methionine by water soluble colloidal MnO<Subscript>2</Subscript>

Aqueous solution of water soluble colloidal MnO₂ was prepared by Perez-Benito method. Kinetics of l-methionine oxidation by colloidal MnO₂ in perchloric acid (0.93 × 10⁻⁴ to 3.72 × 10⁻⁴ mol dm⁻³) has been studied spectrophotometrically. The reaction follows first-order kinetics with respect to [H⁺]. The first-order kinetics with respect to l-methionine at low concentration shifts to zero order at higher concentration. The effects of [Mn(II)] and [F⁻] on the reaction rate were also determined. Manganese (II) has sigmoidal effect on the rate reaction and act as auto catalyst. The exact dependence on [Mn(II)] cannot be explained due to its oxidation by colloidal MnO₂. Methionine sulfoxide was formed as the oxidation product of l-methionine. Ammonia and carbon dioxide have not been identified as the reaction products. The mechanism with the observed kinetics has been proposed and discussed.     

Synthesis and biological activity of a cyclic hexapeptide from Dianthus superbus

Plant-originated cyclopolypeptide (XIII) was synthesized by coupling of dipeptide Boc-l-asn(bzh)-l-phe-OH and tetrapeptide gly-l-leu-l-ala-l-tyr-OMe followed by cyclization of a linear hexapeptide segment. Structure elucidation of XIII was done on basis of detailed spectral analysis including FTIR, ¹H NMR, ¹³C NMR, FAB MS and elemental analysis. From the results of pharmacological screening, it was concluded that XIII possesses high cytotoxic activity against DLA and EAC cell lines with CTC₅₀ values of 15.1 μM and 18.6 μM, and potent antimicrobial activity against pathogenic fungi C. albicans with MIC of 6 μg mL⁻¹. Moreover, XIII possesses moderate anthelmintic activity against earthworms M. konkanensis, P. corethruses, and Eudrilus sp. at 2 mg mL⁻¹ dose level.