Syndiotactic polymerization of styrene and copolymerization with ethylene catalyzed by chiral half-sandwich rare-earth metal dialkyl complexes

The syndiotactic polymerization of styrene(St) and the copolymerization of St with ethylene(E) were carried out by using a series of chiral half-sandwich rare-earth metal dialkyl complexes(Cp~x*) as the catalysts. The complexes are Ln(CH_2SiMe_3)_2(THF)(1-4: Ln = Sc(1), Ln = Lu(2), Ln = Y(3), Ln = Dy(4)) bearing chiral cyclopentadienyl ligand containing bulky cylcohexane derivatives in the presence of activator and AliBu_3. For the St polymerization, a high activity up to 3.1 × 10~6 g of polymer mol Ln~(-1)·h~(-1) and a high syndiotactic selectivity more than 99% were achieved. The resulting syndiotactic polystyrenes(sPSs) have the molecular weights(Mn) ranging from 3700 g·mol~(-1) to 6400 g·mol~(-1) and the molecular weight distributions(Mw/Mn) from 1.40 to 5.03. As for the copolymerization of St and E, the activity was up to 2.4 × 10~6 g of copolymer mol Sc~(-1)·h~(-1)·MPa~(-1), giving random St-E copolymers containing syndiotactic polystyrene sequences with different St content in the range of 15 mol%-58 mol%. These results demonstrate that the bulky cyclopentadienyl ligands of the chiral half-sandwich rare-earth metal complexes effectively inhibit the continued insertion of St monomers into the(co)polymer chain to some extent in comparison with the known half-sandwich rare-earth metal complexes.     

Bis(guanidinate) alkoxide complexes of lanthanides: synthesis, structures and use in immortal and stereoselective ring-opening polymerization of cyclic esters

A series of new bis(guanidinate) alkoxide Group 3 metal complexes [Ln((Me3Si)2NC(NiPr)2)2(OR)] (R=OtBu, Ln=Y, Nd, Sm, Lu; R=OiPr, Ln=Y, Nd, Lu) has been synthesized. X-ray structural determinations revealed that bis(guanidinate) tert-butoxides are monomeric complexes. The isopropoxide complex [Y((Me3Si)2NC(NiPr)2)2(OiPr)] undergoes slow decomposition in solution, to afford the unusual dimeric amido complex [(Y((Me3Si)2NC(NiPr)2)2(mu-N(iPr)C triple chemical bond N))2]. Complexes [Ln((Me3Si)2NC(NiPr)2)2(OR)] (R=OtBu, Ln=Y, Nd, Sm, Lu; R=OiPr, Ln=Y, Nd, Lu) are active catalysts/initiators for the ROP of rac-lactide and rac-beta-butyrolactone under mild conditions. Most of those polymerizations proceed with a significant degree of control. Bis(guanidinate) alkoxides appear to be well suited for achieving immortal polymerization of lactide, through the introduction of large amounts of isopropanol as a chain-transfer agent. The synthesized complexes are able to promote the stereoselective ROP of rac-beta-butyrolactone to afford syndiotactic poly(hydrobutyrate) through a chain-end control mechanism, while they are surprisingly non-stereoselective for the ROP of lactide under strictly similar conditions.     

Living polymerization of ethylene catalyzed by titanium complexes having fluorine-containing phenoxy-imine chelate ligands

Seven titanium complexes bearing fluorine-containing phenoxy-imine chelate ligands, TiCl(2)[eta(2)-1-[C(H)=NR]-2-O-3-(t)Bu-C(6)H(3)](2) [R = 2,3,4,5,6-pentafluorophenyl (1), R = 2,4,6-trifluorophenyl (2), R = 2,6-difluorophenyl (3), R = 2-fluorophenyl (4), R = 3,4,5-trifluorophenyl (5), R = 3,5-difluorophenyl (6), R = 4-fluorophenyl (7)], were synthesized from the lithium salt of the requisite ligand and TiCl(4) in good yields (22%-76%). X-ray analysis revealed that the complexes 1 and 3 adopt a distorted octahedral structure in which the two phenoxy oxygens are situated in the trans-position while the two imine nitrogens and the two chlorine atoms are located cis to one another, the same spatial disposition as that for the corresponding nonfluorinated complex. Although the Ti-O, Ti-N, and Ti-Cl bond distances for complexes 1 and 3 are very similar to those for the nonfluorinated complex, the bond angles between the ligands (e.g., O-Ti-O, N-Ti-N, and Cl-Ti-Cl) and the Ti-N-C-C torsion angles involving the phenyl on the imine nitrogen are different from those for the nonfluorinated complex, as a result of the introduction of fluorine atoms. Complex 1/methylalumoxane (MAO) catalyst system promoted living ethylene polymerization to produce high molecular weight polyethylenes (M(n) > 400 000) with extremely narrow polydispersities (M(w)/M(n) < 1.20). Very high activities (TOF > 20 000 min(-1) atm(-1)) were observed that are comparable to those of Cp(2)ZrCl(2)/MAO at high polymerization temperatures (25, 50 degrees C). Complexes 2-4, which have a fluorine atom adjacent to the imine nitrogen, behaved as living ethylene polymerization catalysts at 50 degrees C, whereas complexes 5-7, possessing no fluorine adjacent to the imine nitrogen, produced polyethylenes having M(w)/M(n) values of ca. 2 with beta-hydrogen transfer as the main termination pathway. These results together with DFT calculations suggested that the presence of a fluorine atom adjacent to the imine nitrogen is a requirement for the high-temperature living polymerization, and the fluorine of the active species for ethylene polymerization interacts with a beta-hydrogen of a polymer chain, resulting in the prevention of beta-hydrogen transfer. This catalyst system was used for the synthesis of a number of unique block copolymers such as polyethylene-b-poly(ethylene-co-propylene) diblock copolymer and polyethylene-b-poly(ethylene-co-propylene)-b-syndiotactic polypropylene triblock copolymer from ethylene and propylene.     

Half-sandwich bis(tetramethylaluminate) complexes of the rare-earth metals: synthesis, structural chemistry, and performance in isoprene polymerization

The protonolysis reaction of [Ln(AlMe(4))(3)] with various substituted cyclopentadienyl derivatives HCp(R) gives access to a series of half-sandwich complexes [Ln(AlMe(4))(2)(Cp(R))]. Whereas bis(tetramethylaluminate) complexes with [1,3-(Me(3)Si)(2)C(5)H(3)] and [C(5)Me(4)SiMe(3)] ancillary ligands form easily at ambient temperature for the entire Ln(III) cation size range (Ln=Lu, Y, Sm, Nd, La), exchange with the less reactive [1,2,4-(Me(3)C)(3)C(5)H(3)] was only obtained at elevated temperatures and for the larger metal centers Sm, Nd, and La. X-ray structure analyses of seven representative complexes of the type [Ln(AlMe(4))(2)(Cp(R))] reveal a similar distinct [AlMe(4)] coordination (one eta(2), one bent eta(2)). Treatment with Me(2)AlCl leads to [AlMe(4)] --> [Cl] exchange and, depending on the Al/Ln ratio and the Cp(R) ligand, varying amounts of partially and fully exchanged products [{Ln(AlMe(4))(mu-Cl)(Cp(R))}(2)] and [{Ln(mu-Cl)(2)(Cp(R))}(n)], respectively, have been identified. Complexes [{Y(AlMe(4))(mu-Cl)(C(5)Me(4)SiMe(3))}(2)] and [{Nd(AlMe(4))(mu-Cl){1,2,4-(Me(3)C)(3)C(5)H(2)}}(2)] have been characterized by X-ray structure analysis. All of the chlorinated half-sandwich complexes are inactive in isoprene polymerization. However, activation of the complexes [Ln(AlMe(4))(2)(Cp(R))] with boron-containing cocatalysts, such as [Ph(3)C][B(C(6)F(5))(4)], [PhNMe(2)H][B(C(6)F(5))(4)], or B(C(6)F(5))(3), produces initiators for the fabrication of trans-1,4-polyisoprene. The choice of rare-earth metal cation size, Cp(R) ancillary ligand, and type of boron cocatalyst crucially affects the polymerization performance, including activity, catalyst efficiency, living character, and polymer stereoregularity. The highest stereoselectivities were observed for the precatalyst/cocatalyst systems [La(AlMe(4))(2)(C(5)Me(4)SiMe(3))]/B(C(6)F(5))(3) (trans-1,4 content: 95.6 %, M(w)/M(n)=1.26) and [La(AlMe(4))(2)(C(5)Me(5))]/B(C(6)F(5))(3) (trans-1,4 content: 99.5 %, M(w)/M(n)=1.18).     

Postmetallocene lanthanide-hydrido chemistry: A new family of complexes [{Ln{(Me3Si)2NC(NiPr)2}2(mu-H)}2] (Ln = Y, Nd, Sm, Gd, Yb) supported by guanidinate ligands-synthesis, structure, and catalytic activity in olefin polymerization

The new family of Lewis base free hydrido complexes of rare-earth metals supported by guanidinate ligands [{Ln{(Me3Si)2NC(NiPr)2}2(mu-H)}2] (Ln = Y, Nd, Sm, Gd, Yb) was synthesized and structurally characterized. Single-crystal X-ray and solution NMR studies revealed that these complexes are dimeric in both solid state and in [D6]benzene. The dimeric hydrido complexes can adopt eclipsed (Nd, Sm, Gd) or staggered (Y, Yb, Lu) conformations depending on the metal-atom size. Catalytic activity of these [{Ln{(Me3Si)2NC(NiPr)2}2(mu-H)}2] complexes in the polymerization of ethylene, propylene, and styrene has been investigated. Complexes of Sm and Y have high catalytic activity in ethylene polymerization (1268 and 442 g mmol(-1) atm(-1) h(-1), respectively).     

Crystal Structure of 〔PrAl(CF_3COO)_2(CF_3CHOO)(C_2H_5)_2(C_4H_8O)_2〕_2

１ＩＮＴＲＯＤＵＣＴＩＯＮＩｎｒｅｃｅｎｔｙｅａｒｓ,ａｓｅｒｉｅｓｏｆｌａｎｔｈａｎｉｄｅ ａｌｕｍｉｎｉｕｍｃｏｍｐｌｅｘｅｓｗｈｉｃｈａｒｅａｃｔｉｖｅｆｏｒｐｏｌｙ ｍｅｒｉｚａｔｉｏｎｏｆｏｌｆｉｎｓ〔１〕ｈａｖｅｂｅｅｎｒｅｐｏｒｔｅｄ．...     

Influence of Schiff base and lanthanide metals on the synthesis, stability, and reactivity of monoamido lanthanide complexes bearing two Schiff bases

The monoamido lanthanide complexes stabilized by Schiff base ligand L(2)LnN(TMS)(2) (L = 3,5-Bu(t)(2)-2-(O)-C(6)H(2)CH═N-8-C(9)H(6)N, Ln = Yb (1), Y (2), Eu (3), Nd (4), and La (5)) were synthesized in good yields by the reactions of Ln[N(TMS)(2)](3) with 1.8 equiv of HL in hexane at room temperature. It was found that the stability of 1-5 depends greatly on the size of the lanthanide metals with the increasing trend of Yb ≈ Y < Nd < La. The amine elimination of Ln[N(TMS)(2)](3) with the bulky bidentate Schiff base HL' (L' = 3,5-Bu(t)(2)-2-(O)-C(6)H(2)CH═N-2,6-Pr(i)(2)-C(6)H(3)) afforded the monoamido lanthanide complexes L'(2)LnN(TMS)(2) (Ln = Yb (9), Y (10), Nd (11), and La (12)). While the amine elimination with the less bulky Schiff base HL' (L' = 3,5-Bu(t)(2)-2-(O)-C(6)H(2)CH═N-2,6-Me(2)-C(6)H(3)) yielded the desired monoamido complexes with the small metals of Y and Yb, L'(2)LnN(TMS)(2) (Ln = Yb (13) and Y (14)), and the more stable tris-Schiff base complexes with the large metals of La and Nd, yielded L'(3)Ln as the only product. Complexes 1-14 were fully characterized including X-ray crystal structural analysis. Complexes 1-5, 10, and 14 can serve as the efficient catalysts for addition of amines to carbodiimides, and the catalytic activity is greatly affected by the lanthanide metals with the active sequence of Yb < Y < Eu ≈ Nd ≈ La.     

Scandium half-metallocene-catalyzed syndiospecific styrene polymerization and styrene-ethylene copolymerization: unprecedented incorporation of syndiotactic styrene-styrene sequences in styrene-ethylene copolymers

On treatment with 1 equiv of [Ph3C][B(C6F5)4], the scandium half-sandwich bis(alkyl) complex (C5Me4SiMe3)Sc(CH2SiMe3)2(THF) showed extremely high activity (up to 1.36 x 104 kg of sPS/(mol Sc.h)) and syndiospecificity (rrrr > 99%) for the polymerization of styrene at room temperature in toluene. More remarkably, this catalyst system could also effect the syndiospecific copolymerization of styrene with ethylene to yield styrene-ethylene copolymers having syndiotactic styrene-styrene sequences. The styrene content in the copolymers could be easily controlled by changing the styrene feed and could reach higher than 80 mol %. This is the first example of formation of such types of styrene-ethylene copolymers, which are expected to show novel properties.     

Unexpected consequences of block polydispersity on the self-assembly of ABA triblock copolymers

Controlled/"living" polymerizations and tandem polymerization methodologies offer enticing opportunities to enchain a wide variety of monomers into new, functional block copolymer materials with unusual physical properties. However, the use of these synthetic methods often introduces nontrivial molecular weight polydispersities, a type of chain length heterogeneity, into one or more of the copolymer blocks. While the self-assembly behavior of monodisperse AB diblock and ABA triblock copolymers is both experimentally and theoretically well understood, the effects of broadening the copolymer molecular weight distribution on block copolymer phase behavior are less well-explored. We report the melt-phase self-assembly behavior of SBS triblock copolymers (S = poly(styrene) and B = poly(1,4-butadiene)) comprised of a broad polydispersity B block (M(w)/M(n) = 1.73-2.00) flanked by relatively narrow dispersity S blocks (M(w)/M(n) = 1.09-1.36), in order to identify the effects of chain length heterogeneity on block copolymer self-assembly. Based on synchrotron small-angle X-ray scattering and transmission electron microscopy analyses of seventeen SBS triblock copolymers with poly(1,4-butadiene) volume fractions 0.27 ≤ f(B) ≤ 0.82, we demonstrate that polydisperse SBS triblock copolymers self-assemble into periodic structures with unexpectedly enhanced stabilities that greatly exceed those of equivalent monodisperse copolymers. The unprecedented stabilities of these polydisperse microphase separated melts are discussed in the context of a complete morphology diagram for this system, which demonstrates that narrow dispersity copolymers are not required for periodic nanoscale assembly.     

Rare-earth metal bis(alkyl)s that bear a 2-pyridinemethanamine ligand: dual catalysis of the polymerizations of both isoprene and ethylene

New pyridinemethanamido-ligated rare-earth metal bis(alkyl) complexes [C(5)H(4)N-CH(Me)-NC(6)H(3)((i)Pr)(2)]Ln(CH(2)SiMe(3))(2)(THF) (Ln = Sc (1), Y (2), Lu (3)) have been prepared at 0 °C via a protonolysis reaction between rare-earth metal tris(alkyl)s and the corresponding 2-pyridinemethanamine ligand and fully characterized by NMR and X-ray diffraction analysis. Bis(alkyl) complexes 1-3 are analogous monomers of THF solvate, where the ligand bonds to the metal center in a κN:κN-bidentate mode. Complexes 1-3, in combination with [Ph(3)C][B(C(6)F(5))(4)], showed a good activity towards isoprene polymerization to give polyisoprene with a main 3,4-selectivity (60%-66%); in particular the yttrium catalyst system, 2/[Ph(3)C][B(C(6)F(5))(4)], displayed a living mode. By contrast, only the precatalyst 2 exhibited activity for isoprene polymerization in the presence of [PhNMe(2)H][B(C(6)F(5))(4)]. The influence of alkylaluminium (AlR(3), R = Me, Et, (i)Bu) and the metal center on the polymerization of isoprene was also studied, and it was found that addition of AlMe(3) to the catalyst systems could lead to a dramatic change in the microstructure of the polymer from 3,4-specific to 1,4-selective (89%-95%), but the ionic radius of the central metal had little influence on the selectivity. In addition, by using the 1(Sc)/[Ph(3)C][B(C(6)F(5))(4)]/10 Al(i)Bu(3), the polymerization of ethylene was also achieved with moderate activity (up to 3.2× 10(5) g (PE) mol(Sc)(-1) h(-1) bar(-1)) and narrow polydispersity (M(w)/M(n) = 1.19-1.28); while the effect of temperature on the activity was discussed. Such dual catalysis for the polymerizations of both isoprene and ethylene is rare.     

Synthesis, structure and catalytic activity of alkali metal-free bent-sandwiched lanthanide amido complexes with calix[4]-pyrrolyl ligands

Simple silylamine elimination reactions of calix[4]-pyrrole [R(2)C(C(4)H(2)NH)](4) (R = Me (1), {-(CH(2))(5)-}(0.5) (2)) with 2 equiv. of [(Me(3)Si)(2)N](3)Ln(μ-Cl)Li(THF)(3) (Ln = Nd, Sm, Dy) in reflux toluene, afforded the novel dinuclear alkali metal-free trivalent lanthanide amido complexes (η(5):η(1):η(5):η(1)-R(8)-calix[4]-pyrrolyl){LnN(SiMe(3))(2)}(2) (R = Me, Ln = Nd (3), Sm (4), Dy (5); R = {-(CH(2))(5)-}(0.5), Ln = Nd (6), Sm(7)). The complexes were fully characterized by elemental analyses, spectroscopic analyses and single-crystal X-ray analyses. X-ray diffraction studies showed that each lanthanide metal was supported by bispyrrolyl anions in an η(5) fashion and along with three nitrogen atoms from N(SiMe(3))(2) and two other pyrroyl rings in η(1) modes formed the novel bent-sandwiched lanthanide amido bridged trivalent lanthanide amido complexes, similar to ansa-cyclopentadienyl ligand-supported lanthanide amides with respect to each metal center. The catalytic activities of these organolanthanide complexes as single component l-lactide polymerization catalysts were studied.     

Synthesis and solid-state structures of pyrazolylmethane complexes of the rare earths

In this paper, we report the first examples of trispyrazolylmethane complexes of rare earths. Reaction of LnCl3 with Tpm* (tris(3,5-dimethylpyrazolyl)methane) in THF or acetonitrile gives good yields of the [Ln(Tpm*)Cl3] (Ln = Y, Ce, Nd, Sm, Gd, Yb). Tpm* adducts of the lanthanide triflates [Ln(Tpm*)(OTf)3(THF)] (Ln = Y, Ho, Dy) may also be prepared. The X-ray crystal structures of [Y(Tpm*)Cl3], [Sm(Tpm*)Cl3(THF)], and [Ln(Tpm*)(OTf)3(THF)] (Ln = Y, Ho) are reported. The halide/triflate complexes may be used to prepare the aryloxide complexes [Ln(Tpm*)(OArMe2)3] (Ln = Y, Nd, Sm, Yb; ArMe2 = C6H3-2,6-(CH3)2), which are fluxional in solution as a result of interactions between the Tpm* and the aryloxide groups. The structures of the Nd and Sm complexes have been determined. Finally, the reaction of [Nd(BH4)3(THF)3] with Tpm* in THF results in the displacement of two THF molecules to give [Nd(Tpm*)(BH4)3(THF)]. Infrared spectra are consistent with tridentate borohydride coordination. The X-ray structures of these compounds indicate that the Tpm* ligand is less strongly bound than its anionic trispyrazolylborate analogues.     

2-phosphanylphenolate nickel catalysts for the polymerization of ethylene

The previously unknown methallylnickel 2-diorganophosphanylphenolates (R=Ph, cHex) were synthesized and found to catalyze the polymerization of ethylene. To explore the potential for ligand-tuning, a variety of P-alkyl- and P-phenyl-2-phosphanylphenols was synthesized and allowed to react with [Ni(cod)(2)] (cod=1,5-cyclooctadiene) or with NiBr(2).DME and NaH. The complexes formed in situ with [Ni(cod)(2)] are generally active as ethylene polymerization catalysts with all the ligands tested, whereas the latter systems are inactive when 2-dialkylphosphanylphenols are applied. M(w) values, ranging from about 1000 to about 100000 g mol(-1), increase for various R(2)P groups in the order R=Ph相似文献   

Tuning the active species from syndiospecific styrene polymerisation to ethylene/styrene copolymerisation by (aryloxo)(cyclopentadienyl)titanium complexes-MAO catalysts

Exclusive formation of poly(ethylene-co-styrene)s were observed by introduction of ethylene into the solution of syndiospecific styrene polymerisation using Cp'TiCl(2)(O-2,6-(i)Pr(2)C(6)H(3)) (Cp' = 1,2,4-Me(3)C(5)H(2), tert-BuC(5)H(4))-MAO catalysts without by-production of syndiotactic polystyrene, whereas the styrene polymerisation did not proceed when ethylene was removed from the reaction mixture of ethylene/styrene copolymerisation.     

Organolanthanide-catalyzed synthesis of phosphine-terminated polyethylenes. Scope and mechanism

Primary and secondary phosphines are investigated as chain-transfer agents for organolanthanide-mediated olefin polymerization. Ethylene polymerizations were carried out with [Cp'(2)LnH](2) and Cp'(2)LnCH(SiMe(3))(2) (Cp' = eta(5)-Me(5)C(5); Ln = La, Sm, Y, Lu) precatalysts in the presence of dicyclohexyl-, diisobutyl-, diethyl-, diphenyl-, cyclohexyl-, and phenylphosphine. In the presence of secondary phosphines, high polymerization activities (up to 10(7) g of polymer/(mol of Ln.atm ethylene.h)) and narrow product polymer polydispersities are observed. For lanthanocene-mediated ethylene polymerizations, the phosphine chain-transfer efficiency correlates with the rate of Ln-CH(SiMe(3))(2) protonolysis by the same phosphines and follows the trend H(2)PPh > H(2)PCy > HPPh(2) > HPEt(2) approximately HP(i)()Bu(2) > HPCy(2). Under the conditions investigated, dicyclohexylphosphine is not an efficient chain-transfer agent for Cp'(2)LaPCy(2)- and Cp'(2)YPCy(2)-mediated ethylene polymerizations. Diisobutylphosphine and diethylphosphine are efficient chain-transfer agents for Cp'(2)La-mediated polymerizations; however, phosphine chain transfer does not appear to be competitive with other chain-transfer pathways in Cp'(2)Y-mediated polymerizations involving diisobutylphosphine. Regardless of the lanthanide metal, diphenylphosphine is an efficient chain-transfer agent for ethylene polymerization. Polymerizations conducted in the presence of primary phosphines produce only low-molecular-weight products. Thus, Cp'(2)Y-mediated ethylene polymerizations conducted in the presence of phenylphosphine and cyclohexylphosphine produce low-molecular-weight phenylphosphine- and cyclohexylphosphine-capped oligomers, respectively. For Cp'(2)YPPh(2)-mediated ethylene polymerizations, a linear relationship is observed between M(n) and [diphenylphosphine](-)(1), consistent with a phosphine protonolytic chain-transfer mechanism.     

[(μ-CF~3CO~2)~2Ln(μ-CF~3CHO~2)AlR~2.2THF]~2的合成和表征及其对某些极性单体的催化活性

通过(CF~3CO~2)~3Ln(Ln=Nd、Y和Eu)和R^1AlR~2(R^1=H, R=i-C~4H~9;R^1=R=C~2H~5), 反应首次合成和培养出Nd-Al、Y-Al和Eu-Al三种新的双金属稀土配合物和晶体, 并用X射线衍射法测定出它们的晶体结构, 然后再用二维波谱技术, 进一步证实和完善了晶体结构中的价态和非共面现象。由此确定这三种稀土配合物分子式的通式为: [(μ-CF~3CO~2)~2Ln(μ-CF~3CHO~2)AlR~2.2THF]~2。根据实验结果还提出了通过烷基化、β-消除(或氢化)、氢转移、键合及缔合等五个步骤生成这些配合物的反应机理。这些配合物单独可使MMA和ECH催化聚合, 前者可获得主要以间同结构聚合物, 后者聚合催化活性较高, 在极少量的ECH存在下,还可使THF开环聚合, 并通过PTHF端基分析, 提出了羊离子聚合反应机理。     

Rare-earth-metal-hydrocarbyl complexes bearing linked cyclopentadienyl or fluorenyl ligands: synthesis, catalyzed styrene polymerization, and structure-reactivity relationship

A series of rare-earth-metal-hydrocarbyl complexes bearing N-type functionalized cyclopentadienyl (Cp) and fluorenyl (Flu) ligands were facilely synthesized. Treatment of [Y(CH(2)SiMe(3))(3)(thf)(2)] with equimolar amount of the electron-donating aminophenyl-Cp ligand C(5)Me(4)H-C(6)H(4)-o-NMe(2) afforded the corresponding binuclear monoalkyl complex [({C(5)Me(4)-C(6)H(4)-o-NMe(μ-CH(2))}Y{CH(2)SiMe(3)})(2)] (1a) via alkyl abstraction and C-H activation of the NMe(2) group. The lutetium bis(allyl) complex [(C(5)Me(4)-C(6)H(4)-o-NMe(2))Lu(η(3)-C(3)H(5))(2)] (2b), which contained an electron-donating aminophenyl-Cp ligand, was isolated from the sequential metathesis reactions of LuCl(3) with (C(5)Me(4)-C(6)H(4)-o-NMe(2))Li (1 equiv) and C(3)H(5)MgCl (2 equiv). Following a similar procedure, the yttrium- and scandium-bis(allyl) complexes, [(C(5)Me(4)-C(5)H(4)N)Ln(η(3)-C(3)H(5))(2)] (Ln=Y (3a), Sc (3b)), which also contained electron-withdrawing pyridyl-Cp ligands, were also obtained selectively. Deprotonation of the bulky pyridyl-Flu ligand (C(13)H(9)-C(5)H(4)N) by [Ln(CH(2)SiMe(3))(3)(thf)(2)] generated the rare-earth-metal-dialkyl complexes, [(η(3)-C(13)H(8)-C(5)H(4)N)Ln(CH(2)SiMe(3))(2)(thf)] (Ln=Y (4a), Sc (4b), Lu (4c)), in which an unusual asymmetric η(3)-allyl bonding mode of Flu moiety was observed. Switching to the bidentate yttrium-trisalkyl complex [Y(CH(2)C(6)H(4)-o-NMe(2))(3)], the same reaction conditions afforded the corresponding yttrium bis(aminobenzyl) complex [(η(3)-C(13)H(8)-C(5)H(4)N)Y(CH(2)C(6)H(4)-o-NMe(2))(2)] (5). Complexes 1-5 were fully characterized by (1)H and (13)C NMR and X-ray spectroscopy, and by elemental analysis. In the presence of both [Ph(3)C][B(C(6)F(5))(4)] and AliBu(3), the electron-donating aminophenyl-Cp-based complexes 1 and 2 did not show any activity towards styrene polymerization. In striking contrast, upon activation with [Ph(3)C][B(C(6)F(5))(4)] only, the electron-withdrawing pyridyl-Cp-based complexes 3, in particular scandium complex 3b, exhibited outstanding activitiy to give perfectly syndiotactic (rrrr >99%) polystyrene, whereas their bulky pyridyl-Flu analogues (4 and 5) in combination with [Ph(3)C][B(C(6)F(5))(4)] and AliBu(3) displayed much-lower activity to afford syndiotactic-enriched polystyrene.     

茂金属化合物/Zn/BDGE/MAO催化体系合成aPS-b-P(S-co-E)-b-PE嵌段共聚物的研究

采用单茂钛化合物CpTiCl3,有机环氧化合物1,4-丁二醇二缩水甘油基醚(BDGE),金属锌(Zn)及甲基铝氧烷(MAO)为催化体系,通过自由基聚合和配位聚合机理合成无规聚苯乙烯-b-聚(苯乙烯-co-乙烯)-b-聚乙烯(aPS-b-P(S-co-E)-b-PE).探讨了温度、时间、乙烯压力及Al/Ti摩尔比对共聚合的影响.所得嵌段共聚物采用DSC,WAXD,GPC和13C-NMR等手段进行了表征.结果表明该共聚物是苯乙烯/乙烯嵌段共聚物,聚苯乙烯链段是无规的,聚乙烯链段具有结晶性.     

Lanthanide chloride complexes of amine-bis(phenolate) ligands and their reactivity in the ring-opening polymerization of epsilon-caprolactone

Reaction of two equivalents of n-BuLi with sterically demanding amine-bis(phenol) compounds, H(2)O(2)NN'(R) (Me(2)NCH(2)CH(2)N{CH(2)-3,5-R(2)-C(6)H(2)OH}(2); R = t-Bu or t-Pe (tert-pentyl)) yields isolable lithium complexes, Li(2)(O(2)NN'(R)), in good yields. Upon reaction with one equivalent of LnCl(3)(THF)(x), the lithium salts afford rare earth amine-phenolate chloride complexes in good yields, Ln(O(2)NN'(R))Cl(THF); Ln = Y, Yb, Ho, Gd, Sm, Pr. Crystals of Y(O(2)NN'(t-Bu))Cl(THF), 1, and Sm(O(2)NN'(t-Bu))Cl(DME), 2, suitable for single crystal X-ray crystallographic analysis were obtained. In contrast to previously reported [{Gd(O(2)NN'(t-Pe))(THF)(micro-Cl)}(2)] and related La and Sm complexes, these species are monomeric. 1 contains Y in a distorted octahedral environment bonded to two amine, two phenolate, one THF and one chloride donor. 2 contains Sm in a distorted capped trigonal prismatic environment bonded to two amine, two phenolate, two DME oxygens and one chloride donor. The Ln(O(2)NN'(t-Pe))Cl(THF) complexes were active initators for the controlled ring-opening polymerization of epsilon-caprolactone with a tendency to form low molecular weight cyclic polyesters (M(n) 3000-5000). The conversion rates, although slower than related amido and alkyl species, were different for monomeric and dimeric initiators. The size of the metal centre also affected the conversions and the molecular weights achieved.     

Highly syndiospecific polymerization of styrene catalyzed by allyl lanthanide complexes

Allylic complexes of lanthanides bearing a fluorenyl-based ligand are active single-component catalysts for the polymerization of styrene, giving highly syndiotactic polymers (rrrr > 99%) with low to high molecular weight (Mn = 8000-135 000) and narrow polydispersities (Mw/Mn = 1.25-2.1).