SERS in PAH-Os and gold nanoparticle self-assembled multilayers

We present a detailed structural and surface-enhanced Raman scattering (SERS) study of poly(allylamine) modified with Os(byp)2ClPyCHO (PAH-Os) and gold nanoparticles self-assembled multilayers [PAH-Os+(Au-nanoparticlesPAH-Os)n, n=1 and 5]. Atomic force microscopy and variable-angle spectroscopic ellipsometry measurements indicate that the first nanoparticle layer grows homogenously by partially covering the substrate without clustering. Analyzing the sample thickness and roughness we infer that the growth process advances thereafter by filling with nanoparticles the interstitial spaces between the previously adsorbed nanoparticles. After five immersion steps the multilayers reach a more compact structure. The interaction between plasmons of near-gold nanoparticles provides a new optical absorption around 650 nm which, in addition, allows a more effective SERS process in that spectral region than at the single-plasmon resonance (approximately 530 nm). We compare the electronic resonance Raman and SERS amplification mechanisms in these self-assembled multilayers analyzing Raman resonance scans and Raman intensity micromaps. As a function of nanoparticle coverage we observe large changes in the Raman intensity scans, with maxima that shift from the electronic transitions, to the plasmon resonance, and finally to the coupled-plasmon absorption. The Raman micromaps, on the other hand, evidence huge intensity inhomogeneities which we relate to "hot spots." Numerical discrete dipole approximation calculations including the interaction between gold nanoparticles are presented, providing a qualitative model for the coupled-plasmon absorption and redshifted Raman hot spots in these samples.     

Electrochemical characterization of self-assembled thiol-porphyrin monolayers on gold electrodes by SECM.

Herein, the scanning electrochemical microscopy (SECM) approach is applied to study the formation of thiol-porphyrin self-assembled monolayer (SAMs). Using cyclic voltammetry (CV), the formation process is characterized adopting different probe molecules. The observed phenomena indicate that the formation process is affected by solution properties and the molecular structure of the probe molecules. In K(3)Fe(CN)(6) , the SAMs show a strong electron-transfer (ET) blocking effect on a pure porphyrin-modified electrode. However, addition of metal ions to the porphyrin molecules leads to ET. A consistent tendency is observed throughout the modification process using CV and SECM methods. Furthermore, k(eff) values, the apparent heterogeneous rate constants, obtained for different modification periods affirm the validity of these results. SECM images are used to collect surface information in the course of the modification process when the substrate potential is 0.5 V versus Ag/AgCl. The effect of the substrate potential indicates that the oxidation of the porphyrin molecules is supported by more positive potentials because of the similar bimolecular reaction of the porphyrin ring with positive charge and the probe molecules with negative charge.     

Photocurrent responses at dye sensitised ultrathin polyelectrolyte multilayers supported on gold electrodes

The photoelectrochemical behaviour of ionic conducting ultrathin multilayers formed by sequential deposition of poly-L-lysine and poly-L-glutamic acid on modified gold electrodes is investigated upon sensitisation by zinc mesotetrakis(p-sulfonatophenyl)porphyrin.     

Electrochemical study of interfacial composite nanostructures: polyelectrolyte/gold nanoparticle multilayers assembled on phospholipid/dextran sulfate monolayers at a liquid-liquid interface

The build up and electrochemical characterization of interfacial composite nanostructures containing a cationic polyelectrolyte and negatively charged mercaptosuccinic acid stabilized gold nanoparticles (AuNPs) is reported. The nanostructures were formed at the interface between two immiscible electrolyte solutions in which the organic phase is an immobilized 2-nitrophenyl octyl ether/PVC gel. The growth of the multilayer was verified with UV-vis spectra, and approximately a linear increase in UV-vis absorbance with increasing number of layers was observed. The interfacial capacitance of the multilayers was measured as a function of the potential and a theoretical model was developed to explain the results. The excellent agreement between theoretical and experimental capacitance curves allows us to conclude that nanocomposites behave similarly to polyelectrolyte multilayers, with the outmost layer determining the alternating sign of the outer surface charge density. Cyclic voltammograms were used to evaluate the transfer rate constant across the multilayers of a model drug, metoprolol, and the standard probe tetraethylammonium cation. The apparent rate constants were slightly larger than in other studies in the literature and decrease with the increasing number of layers.     

Light-responsive polyelectrolyte/gold nanoparticle microcapsules

We report the preparation and characterization of light-responsive delivery vehicles, microcapsules composed of multiple polyelectrolyte layers and light-absorbing gold nanoparticles. The nanostructured capsules were loaded with macromolecules (fluorescein isothiocyanate-labeled dextran) by exploiting the pH-dependence of the shell permeability, and the encapsulated material was released on demand upon irradiation with short (10 ns) laser pulses in the near-infrared (1064 nm). In addition, the polyelectrolyte multilayer shell was modified with lipids (dilauroylphosphatidylethanolamine) and then functionalized with ligands (monoclonal immunoglobulin G antibodies) for the purposes of enhanced stability and targeted delivery, respectively. We anticipate that these capsules will find application in a range of areas where controlled delivery is desirable.     

Electrochemical properties of mixed self-assembled monolayers on gold electrodes containing mercaptooctylhydroquinone and alkylthiols

Mixed self-assembled monolayers of 2-(mercaptooctyl)hydroquinone (QH2) and alkylthiols were formed on gold electrodes in EtOH and the redox process of the hydroquinone moiety of QH2 was characterized by cyclic voltammetry (CV) in 0.1 M H(2)SO(4). The monolayers were formed at a series of QH2:alkylthiol ratios and the QH2:alkylthiol ratio in solution was compared to the electrochemical response from QH2 in the obtained monolayer. Mixed monolayers of QH2 with hexylthiol, dodecylthiol, and octadecylthiol were studied. The length of the alkylthiol is crucial for the electrochemical response from QH2 in the monolayer. The total concentration of thiols during monolayer formation and incubation times were also studied and low concentrations of < 2.5 mM and long incubation times gave rise to lower peak separation, lower peak half widths in the CVs of the mixed monolayers, and lower background current. The stability of a pure QH2 monolayer and a 1:4 QH2:hexylthiol monolayer toward high potentials of up to 1.5 V versus Ag/AgCl was also studied and it was observed that the mixed monolayer is significantly more stable than the pure QH2 monolayer.     

Effect of precursor-layer surface charge on the layer-by-layer assembly of polyelectrolyte/nanoparticle multilayers

In this Article, we investigate the effect of a precursor layer, which is composed of four bilayers of polyethyleneimine (PEI) and poly(sodium styrene sulfonate) (PSS), on the subsequent LBL assembly of hybrid films composed of indium tin oxide (ITO) nanoparticles and PSS. A precursor polyelectrolyte layer is usually deposited to minimize interference by the substrate. It is shown here that the "effective" surface charge of the precursor layer can significantly affect the subsequent assembly behavior of [ITO/PSS](9.5) hybrid thin films. Depending on the surface charge of the precursor layer, the subsequent LbL assembly of [ITO/PSS](9.5) hybrid films can exhibit either one or two regimes. When two growth regimes are present, the first one consists of a "recovery regime", and the second is the expected "linear growth regime." The length of the "recovery regime" is dependent on how much positive charge the precursor layer possesses and how fast this surface charge can be compensated. This work reveals for the first time that changes in the surface charge of the precursor layer can have a significant effect on the subsequent LBL assembly process. The surface charge of the precursor layer was investigated using ζ-potential measurements on model silica microspheres. These experiments showed that the surface charge of the precursor layer, [PEI/PSS](4), is dependent on the pH of the solution in which it is immersed, and that it can reverse from a negatively charged surface to a positively charged one, at sufficiently low pH due to the protonation of PEI, despite having the negatively charged PSS layer as the outermost layer.     

Electrochemical quartz crystal microbalance studies of the rectified quantized charging of gold nanoparticle multilayers

Electrochemical quartz crystal microbalance (EQCM) was employed to investigate the dynamics of rectified quantized charging of gold nanoparticle multilayers by in situ monitoring of the interfacial mass changes in aqueous solutions with varied electrolytes. EQCM measurements showed that interfacial mass changes only occurred at potentials more positive than the potential of zero charge (PZC), where nanoparticle quantized charging was well-defined, whereas in the negative potential regime where only featureless voltammetric responses were observed, the QCM frequency remained virtually invariant. This was ascribed to the fact that nanoparticle quantized charging was induced by the formation of ion-pairs between hydrophobic electrolyte anions (PF6-, ClO4-, BF4-, and NO3-) and positively charged gold nanoparticles. Based on the total frequency changes and the number of electrolyte anions adsorbed onto the particle layers, the number of water molecules that were involved in the ion-pairing processes was then quantitatively estimated at varied particle charge states, which was found to increase with increasing hydrophobicity of the anions. Additionally, the electron-transfer dynamics of the gold particle multilayers were also evaluated by electrochemical impedance measurements. It was found that the particle electron-transfer rate was about an order of magnitude slower than that of the ion diffusion and binding.     

Electrochemical properties of Nile Blue covalently immobilized on self-assembled thiol-monolayer modified gold electrodes.

A monolayer of Nile Blue (NB) has been covalently immobilized on the self-assembled thiol-monolayer modified gold electrode. Cyclic voltammograms indicated a stable and reverse redox process of NB bonded on the electrode surface. The mechanisms of redox process coupling with proton transfer were proposed. The NB-modified electrode showed excellent electrocatalytic activity toward Nicotinamide adenine dinucleotide (NADH) oxidation and horseradish peroxidase (HRP) reduction. A hydrogen peroxide biosensor based on NB as a mediator has been demonstrated.     

Layer by layer self-assembled polyelectrolyte multilayers with embedded phospholipid vesicles

We describe a method to embed phospholipid vesicles into polyelectrolyte multilayers built up by the alternate deposition of polyanions and polycations. Before deposition, the vesicles are rigidified by polycation adsorption onto their surface avoiding their fusion once deposited on the multilayer surface. The vesicles adsorb to form a compact and "hard" monolayer as imaged by atomic force microscopy. The thickness of the adsorbed vesicle layer, of the order of 250 nm, is very close to the diameter of the vesicles in solution. This work should open the route to the buildup of multilayer films containing phospholipid vesicles that could act as "reservoirs" for drugs or enzymatic nanoreactors.     

Electrochemical and surface analytical studies of self-assembled monolayers of three aromatic thiols on gold electrodes

Three thiols with three aromatic rings and different structure – terphenyl-4-methanethiol (TPMT), terphenyl-4-thiol (TPT), and anthracene-2-thiol (AT) – have been used to form self-assembled monolayers (SAM) on vapour-deposited and flame-annealed Au films on glass substrates. All three SAMs effectively block the anodic formation of Au oxide, indicating densely packed layers which prevent the access of water and hydrated ions through the organic layer to the metal surface. The film improves its inhibiting properties with duration of exposure to the thiol solutions, reaching completion after 1 hour [1]. The charge-transfer reaction of the Fe(CN)₆ ^3–/Fe(CN)₆ ^4– system is blocked for TPMT films with an insulation of the π-electron system from the Au surface by the methylene group. TPT and especially AT films show the current density of the redox reactions. It is proposed that the charge transfer occurs via the aromatic molecules of the SAMs to the Au surface. Electronic Publication     

Electrochemical characteristics of thin nickel hexacyanoferrate films formed on gold and thiol self-assembled monolayers modified gold electrodes.

Nickel hexacyanoferrate (NiHCF) film was prepared and characterized on gold and thiol self-assembled monolayers (SAMs)-modified gold electrodes. It was found that the film exhibited some different electrochemical characteristics compared with that found on a carbon electrode. In the presence of K+, the film exhibited a redox peak at about 0.5 V. The peak potential shifted linearly with the K+ concentration over the range of about 0.1 mM - 0.1 M with slopes of 54 - 60 mV per log[K+]. However, in solutions containing Na+, Li+ or NH4+ ion the film did not generate well-defined peaks, or even a visible redox peak. Therefore, the film showed a selective potential response to K+. The voltammetric behavior of NiHCF film varied with thiols, the preparation procedure and the solution pH. Under certain conditions, the characteristics of the film could be improved to some extent.     

Blocking behavior of self-assembled monolayers on gold electrodes

Self-assembled monolayers (SAMs) with metal electrodes, especially thiols on gold, are the subject of this investigation because of the unique properties of SAM-modified surfaces. Normal alkanethiols are used to modify the surface of a conventional gold electrode to block certain ions such as Pb(II) and Cu(II) from the surface of the electrode. Normal alkanethiols are also used to study the SAM-gold interfacial adsorption-desorption behavior of the self-assembled monolayer. The effects of varying chain length of SAMs, varying concentration of the alkanethiol solutions, immersion time of the pure gold electrode in the SAM solution, and the stability of a SAM-modified gold electrode in fresh chloroform are investigated using the oxidation-reduction peaks of gold. Conditions that optimize the surface coverage and the uniformity of the SAMs have been determined. Normal alkanethiols proved to be a good insulator on the electrode surface. Received: 16 January 1997 / Accepted: 4 March 1997     

Influence of assembly pH on compression and Ag nanoparticle synthesis of polyelectrolyte multilayers

Influence of assembly pH on compression and Ag nanoparticle synthesis of polyelectrolyte multilayers was studied using poly(diallyldimethylammonium chloride) (PDADMAC) and poly(4-styrenesulfonic acid-co-maleic acid, 1:1SS:MA) sodium salt (PSSMA 1:1) as the building blocks. The thickest multilayers turned out at pH 4. A homogeneous compression by a silicone rubber stamp increased significantly the water contact angle to a same value which was independent on the original assembly pH anymore. The multilayers assembled at pH 4 could be maximumly compressed to a ratio of 70% by a silicone rubber stamp with linear patterns, which was considerably larger than those assembled at other pHs (the compression ratio ~50%). The Ag nanoparticles were then synthesized inside the multilayers either flat compressed or not. The results showed that the compression reduced significantly the amount of Ag nanoparticles for the multilayers assembled at pH 2 and pH 4. The particle amount was also decreased significantly when the multilayers were assembled at higher pH, pH 6, for example, regardless of the compression. Substantial alteration of the multilayers in terms of the surface morphology, thickness and refractive index was found during the reduction of Ag(+) containing multilayers by NaBH(4) solution.     

Toward reliable gold nanoparticle patterning on self-assembled DNA nanoscaffold

Assembly of gold nanoparticles (AuNP) into designer architectures with reliablity is important for nanophotonics and nanoelectronics applications. Toward this goal we present a new strategy to prepare AuNPs monofunctionalized with lipoic acid modified DNA oligos. This strategy offers increased bonding strength between DNA oligos and AuNP surface. These conjugates are further selectively mixed with other DNA strands and assembled into fixed sized DNA nanostructures carring a discrete number of AuNPs at desired positions. Atomic force microscopy imaging reveals a dramatically improved yield of the AuNPs on DNA tile structure compared to the ensembles using monothiolate AuNP-DNA conjugates.     

Layer-by-layer self-assembled multilayers of redox polyelectrolytes and gold nanoparticles

Construction and characterization of structural and charge transport properties of electrostatically LbL self-assembled multilayers of gold nanoparticles and a viologen-based redox-active polyelectrolyte is reported.     

Polyelectrolyte/magnetite nanoparticle multilayers: preparation and structure characterization

Polyelectrolyte composite planar films containing a different number of iron oxide (Fe3O4) nanoparticle layers have been prepared using the layer-by-layer adsorption technique. The nanocomposite assemblies were characterized by ellipsometry, UV-vis spectroscopy, and AFM. Linear growth of the multilayer thickness with the increase of the layer number, N, up to 12 reflects an extensive character of this parameter in this range. A more complicated behavior of the refractive index is caused by changes in the multilayer structure, especially for the thicker nanocomposites. A quantitative analysis of the nanocomposite structure is provided comparing a classical and a modified effective medium approach taking into account the influence of light absorption by the Fe3O4 nanoparticles on the complex refractive index of the nanocomposite and contributions of all components to film thickness. Dominant influence of co-adsorbed water on their properties was found to be another interesting peculiarity of the nanocomposite film. This effect, as well as possible film property modulation by light, is discussed.     

Selective depositions on polyelectrolyte multilayers: self-assembled monolayers of m-dPEG acid as molecular template

This paper describes the fabrication of self-assembled monolayer (SAM) patterns of m-d-poly(ethylene glycol) (m-dPEG) acid molecules onto polyelectrolyte multilayers (PEMs). The patterned SAMs on PEMs were created by ionic interactions using microcontact printing (microCP) technique. The created m-dPEG acid monolayer patterns on PEMs act as resistive templates, and thus further depositions of consecutive poly(anion)/poly(cation) pairs of charged particles result in the formation of three-dimensional (3-D) patterned PEM films or selective particle depositions atop the original multilayer thin films. In this study, we illustrate nonlithographic methods of patterning and controlling 3-D PEM architectures and selective particle depositions. We investigated the effect of variables--the choice of solvent, concentration, pH, substrate pretreatment, and stamp contact times--on microcontact printing of m-dPEG acid molecules onto PEM films to determine the optimal conditions for these parameters to achieve efficient transfer of m-dPEG acid patterns onto PEMs. Among the variables, the pH of the m-dPEG acid ink solution played the most important role in the transfer efficiency of the patterns onto the multilayer films. The patterned films were characterized by optical microscopy and atomic force microscopy (AFM).     

A method to construct polyelectrolyte multilayers film containing gold nanoparticles

Gold nanoparticles in polyelectrolyte multilayers film can be easily prepared by repeating immersion of a substrate in poly(diallyl dimethylammonium) chloride (PDDA)-AuCl₄⁻ complexes solution followed by reduction Au³⁺ through heating. UV-vis spectroscopy, cyclic voltammetry (CV) and tapping-mode atomic force microscopy (AFM) are used to confirm the successful construction of the polyelectrolyte multilayers film and the formation of gold nanoparticles. The multilayers film shows electrocatalytic activity to dioxygen reduction.