Wide band gap Cd0.83Mg0.15Al0.02O thin films by pulsed laser deposition

Magnesium and aluminum doped CdO thin films were deposited on quartz substrate using pulsed laser deposition technique. Magnesium is used to widen the band gap and aluminum is used to increase carrier concentration of CdO films. The effect of growth temperature on structural, optical, and electrical properties was studied. These films are crystalline in nature and their preferred orientation depends on growth temperature. These films are highly transparent (∼86%) in visible region. The band gap of the films varies from 3.1 eV to 3.4 eV. The electrical conductivity and carrier concentration were found to decrease with increase in growth temperature.     

Pulsed laser deposition of NdNiO3 thin films

We report the structural and transport properties of NdNiO₃ thin films prepared via pulsed laser deposition over various substrates. The films were well textured and c-axis oriented with good crystalline properties. The electrical resistivity of the films undergoes a metal-insulator transition, depending on the deposition process. Well-defined first order metal-insulator phase transition (T_MI) was observed in the best quality films without high pressure processing. Various growth conditions such as substrate temperature, oxygen pressure and thickness were varied to see their influence on T_MI. Deposition temperature was found to have a great impact on the electrical and structural properties of these films. Further the films deposited on LaAlO₃ substrate were found to be highly oriented with uniform grain size as observed from X-ray diffraction and atomic force microscopy, whereas those on Si substrate were polycrystalline, dense and randomly oriented.     

Synthesis and characterization of porous crystalline SiC thin films prepared by radio frequency reactive magnetron sputtering technique

Hexagonal SiC thin films have been deposited using radio frequency reactive magnetron sputtering technique by varying the substrate temperature and other deposition conditions. Prior to deposition surface modification of the substrate Si(1 0 0) played an important role in deposition of the hexagonal SiC structure. The effect of substrate temperature during deposition on structure, composition and surface morphology of the SiC films has been analyzed using atomic force microscopy, Fourier transform infrared spectroscopy and spectroscopic ellipsometry. X-ray diffraction in conventional θ-2θ mode and omega scan mode revealed that the deposited films were crystalline having 8H-SiC structure and crystallinity improved with increase of deposition temperature. The bonding order and Si-C composition within the films showed improvement with the increase of deposition temperature. The surface of thin films grew in the shape of globes and columns depending upon deposition temperature. The optical properties also showed improvement with increase of deposition temperature and the results obtained by ellipsometry reinforced the results of other techniques.     

Structural and electrical properties of lithium manganese oxide thin films grown by pulsed laser deposition

LiMn₂O₄ thin films were deposited by reactive pulsed laser deposition technique and studied the microstructural and electrical properties of the films. The LiMn₂O₄ thin films deposited in an oxygen partial pressure of 100 mTorr and at a substrate temperature of 573 K from a lithium rich target were found to be nearly stoichiometric. The films exhibited predominantly (111) orientation representing the cubic spinel structure with Fd3m symmetry. The intensity of (111) peak increased and a slight shift in the peak position was observed with the increase of substrate temperature. The lattice parameter increased from 8.117 to 8.2417 Å with the increase of substrate temperature from 573 to 873 K. The electrical conductivity of the films is observed to be a strong function of temperature. The evaluated activation energy for the films deposited at 873 K is 0.64 eV.     

Structural and optical properties of pulsed laser deposited ZnO thin films

Nanocrystalline ZnO thin films were grown by means of pulsed laser deposition. The ablation process was carried out at relatively low background oxygen gas pressure (10 Pa) and by varying the substrate temperature up to 600 °C. Information on the structural and morphological properties of the deposited thin films have been obtained by means of X-ray photoelectron, Raman spectroscopies, X-ray diffraction (XRD) and atomic force microscopy (AFM). The results showed that all the deposited films are sub-stoichiometric in oxygen and with a hexagonal wurtzite crystalline structure, characterized by features of some tens of nanometers in size. An improvement of the films' crystalline quality was observed for the deposition temperature of 300 °C while the further increase of the deposition temperature up to 600 °C induces a worsening of the material's structural properties with the development of a large amount of nanoparticle's clusters. The analysis of the XRD patterns shows a growth crystallographic preferential direction as a function of the deposition temperature, in agreement with the appearance of the only E₂ optical phonon mode in the Raman spectra. Such findings are compatible with the changes observed in the photoluminescent (PL) optical response and was related to the modification of the ZnO thin film structural quality.     

Pulsed laser deposition of semiconducting crystalline double-doped barium titanate thin films on nickel substrates

We synthesized by pulsed laser deposition (Ba,Sr,Y)TiO₃ and (Ba,Pb,Y)TiO₃ thin films on mechanically polished nickel substrates.The synthesized thin films were analyzed for: crystalline structure by X-ray diffractometry, morphology and surface topography by atomic force microscopy, optical and scanning electron microscopy, and elemental composition by energy dispersive X-ray spectroscopy and electrical properties by electrical measurements.We have shown that film properties were determined by the dopants, target composition, and deposition parameters (oxygen pressure, substrate temperature and incident laser fluence). All films exhibited a semiconducting behavior, as proved by the decrease of electrical resistance with heating temperature.     

Fabrication of ZnO thin films by femtosecond pulsed laser deposition

The growth of ZnO thin films on sapphire substrate using the femtosecond PLD technique is reported. The effect of substrate temperature and oxygen pressure on the structural properties of the films was studied. Highly c-axis oriented ZnO films can be grown on sapphire substrates under vacuum conditions using the femtosecond PLD process. There is an optimum substrate temperature for the pulsed laser deposition of ZnO film that enhances the thermodynamic stability and allows the formation of well-crystallized thin films. The crystal quality of the films can be further improved by increasing the deposition time and introducing oxygen during the pulsed laser deposition process.     

Effect of substrate temperature on structural, optical and electrical properties of pulsed laser ablated nanostructured indium oxide films

Nanocrystalline indium oxide (INO) films are deposited in a back ground oxygen pressure at 0.02 mbar on quartz substrates at different substrate temperatures (T_s) ranging from 300 to 573 K using pulsed laser deposition technique. The films are characterized using GIXRD, XPS, AFM and UV-visible spectroscopy to study the effect of substrate temperature on the structural and optical properties of films. The XRD patterns suggest that the films deposited at room temperature are amorphous in nature and the crystalline nature of the films increases with increase in substrate temperature. Films prepared at T_s ≥ 473 K are polycrystalline in nature (cubic phase). Crystalline grain size calculation based on Debye Scherrer formula indicates that the particle size enhances with the increase in substrate temperature. Lattice constant of the films are calculated from the XRD data. XPS studies suggest that all the INO films consist of both crystalline and amorphous phases. XPS results show an increase in oxygen content with increase in substrate temperature and reveals that the films deposited at higher substrate temperatures exhibit better stoichiometry. The thickness measurements using interferometric techniques show that the film thickness decreases with increase in substrate temperature. Analysis of the optical transmittance data of the films shows a blue shift in the values of optical band gap energy for the films compared to that of the bulk material owing to the quantum confinement effect due to the presence of quantum dots in the films. Refractive index and porosity of the films are also investigated. Room temperature DC electrical measurements shows that the INO films investigated are having relatively high electrical resistivity in the range of 0.80-1.90 Ωm. Low temperature electrical conductivity measurements in the temperature range of 50-300 K for the film deposited at 300 K give a linear Arrhenius plot suggesting thermally activated conduction. Surface morphology studies of the films using AFM reveal the formation of nanostructured indium oxide thin films.     

Modeling of In2O3-10 wt% ZnO thin film properties for transparent conductive oxide using neural networks

Effects of deposition process parameters on the deposition rate and the electrical properties of In₂O₃–10 wt% ZnO (IZO) thin films were modeled and analyzed by using the error back-propagation neural networks (BPNN). Output models were represented by response surface plots and the fitness of models was estimated by calculating the root mean square error (RMSE). The deposition rate of IZO thin films is affected by the RF power and the substrate temperature. The electrical properties of the IZO thin films are mainly controlled by O₂ ratio and the substrate temperature. The predicted output characteristics by BPNN can sufficiently explain the mechanism of IZO deposition process. Thus, neural network models can provide the reliable explanation of IZO film deposition.     

Lead-free ferroelectric thin films obtained by pulsed laser deposition

Na_0.5Bi_0.5TiO₃-BaTiO₃ (NBT-BT) thin films grown by pulsed laser deposition have been investigated by X-ray diffraction, scanning electron microscopy, and dielectric spectroscopy in order to clarify the role of substrate temperature on crystalline structure, grain morphology, and dielectric properties. We have shown that the structural and dielectric properties of NBT-BT thin films with composition at morphotropic phase boundary (6% BT) critically depend on the substrate temperature: small variations of this parameter induce structural changes, shifting the morphotropic phase boundary toward tetragonal or rhombohedral side. Higher deposition temperature (1000 K) favor the formation of rhombohedral phase, films deposited at 923 K and 973 K have tetragonal symmetry at room temperature. Grains morphology depends also on the deposition temperature. Atomic force micrographs show grains with square or rectangular shape in a compact structure for films grown at lower temperatures, while grains with triangular shape in a porous structure are observed for films grown at 1000 K. Dielectric spectroscopy measurements evidenced the phase transition between ferroelectric and antiferroelectric phase at 370 K. Films grown at 1000 K shown low electrical resistivity due to their porous structure. High dielectric constant values (about 800 at room temperature and 2700 at 570 K) have been obtained for films grown at temperatures up to 973 K.     

Ultra smooth NiO thin films on flexible plastic (PET) substrate at room temperature by RF magnetron sputtering and effect of oxygen partial pressure on their properties

Transparent p-type nickel oxide thin films were grown on polyethylene terephthalate (PET) and glass substrates by RF magnetron sputtering technique in argon + oxygen atmosphere with different oxygen partial pressures at room temperature. The morphology of the NiO thin films grown on PET and glass substrates was studied by atomic force microscope. The rms surface roughnesses of the films were in the range 0.63-0.65 nm. These ultra smooth nanocrystalline NiO thin films are useful for many applications. High resolution transmission electron microscopic studies revealed that the grains of NiO films on the highly flexible PET substrate were purely crystalline and spherical in shape with diameters 8-10 nm. XRD analysis also supported these results. NiO films grown on the PET substrates were found to have better crystalline quality with fewer defects than those on the glass substrates. The sheet resistances of the NiO films deposited on PET and glass substrates were not much different; having values 5.1 and 5.3 kΩ/□ and decreased to 3.05, 3.1 kΩ/□ respectively with increasing oxygen partial pressure. The thicknesses of the films on both substrates were ∼700 nm. It was also noted that further increase in oxygen partial pressure caused increase in resistivity due to formation of defects in NiO.     

Laser energy density, structure and properties of pulsed-laser deposited zinc oxide films

Zinc oxide thin films were deposited on soda lime glass substrates by pulsed laser deposition in an oxygen-reactive atmosphere at 20 Pa and a constant substrate temperature at 300 °C. A pulsed KrF excimer laser, operated at 248 nm with pulse duration 10 ns, was used to ablate the ceramic zinc oxide target. The structure, the optical and electrical properties of the as-deposited films were studied in dependence of the laser energy density in the 1.2-2.8 J/cm² range, with the aid of X-ray Diffraction, Atomic Force Microscope, Transmission Spectroscopy techniques, and the Van der Pauw method, respectively. The results indicated that the structural and optical properties of the zinc oxide films were improved by increasing the laser energy density of the ablating laser. The surface roughness of the zinc oxide film increased with the decrease of laser energy density and both the optical bang gap and the electrical resistivity of the film were significantly affected by the laser energy density.     

生长温度对Ga掺杂ZnO薄膜光电性能的影响

在不同衬底温度(室温~750 ℃)条件下,采用脉冲激光沉积(PLD)方法在石英玻璃和单晶硅(111)衬底上制备了Ga掺杂ZnO(GZO)薄膜。结果显示:衬底温度的变化导致衬底表面吸附原子扩散速率和脱附速率的不同,从而导致合成薄膜结晶质量的差异,衬底温度450 ℃时制备的GZO薄膜具有最好的结晶特性;GZO薄膜中载流子浓度随衬底温度升高而单调减小的现象与GZO薄膜中的本征缺陷密切相关,晶界散射强度的变化导致迁移率出现先增大后减小的趋势,衬底温度450 ℃时制备的GZO薄膜具有最小的电阻率~0.02 Ω·cm;随着衬底温度的升高,薄膜载流子浓度的单调减小导致了薄膜光学带隙变窄,所有合成样品的平均可见光透过率均达到85%以上。采用PLD方法制备GZO薄膜,衬底温度的改变可以对薄膜的光电性能起到调制作用。     

Oblique angle deposition of TiO2 thin films prepared by electron-beam evaporation

Optical, structural and photocatalytic properties of TiO₂ thin films obliquely deposited on quartz glass substrate using an electron-beam evaporation method were investigated. The photocatalytic activity of the films was evaluated by photodecomposition of methylene blue. An increase in incident deposition angle increased the porosity and surface roughness of the TiO₂ films. As a result, the photocatalytic activity was enhanced with incident deposition angle up to 60°. However, a further increase in incident deposition angle to 75° reduced the photocatalytic activity due to a lack of the crystalline phase.     

Influence of the thickness on structural,magnetic and electrical properties of La0.7Ca0.3MnO3 thin film

We have studied the effect of thickness on the structural, magnetic and electrical properties of La_0.7Ca_0.3MnO₃ thin films prepared by pulsed laser deposition method using X-ray diffraction, electrical transport, magneto-transport and dc magnetization. X-ray diffraction pattern reflects that all films have c-axis epitaxial growth on LaAlO₃ substrate. The decrease in out-of-plane cell parameter specifies a progressive relaxation of in the plane compressive strain as the film thickness is increases. From the dc magnetization measurements, it is observed that ferromagnetic to paramagnetic transition temperature increases with increase in the film thickness. Magneto-resistance and temperature coefficient of resistance increases with film thickness and have maximum value near its metal to insulator transition temperature.     

Influence of annealing temperature on structural and optical properties of ZnO: In thin films prepared by ultrasonic spray technique

Transparent conducting indium doped zinc oxide was deposited on glass substrate by ultrasonic spray method. The In doped ZnO samples with indium concentration of 3 wt.% were deposited at 300, 350 and 400 °C with 2 min of deposition time. The effects of substrate temperature and annealing temperature on the structural, electrical and optical properties were examined. The DRX analyses indicated that In doped ZnO films have polycrystalline nature and hexagonal wurtzite structure with (0 0 2) preferential orientation and the maximum average crystallite size of ZnO: In before and annealed at 500 °C were 45.78 and 55.47 nm at a substrate temperature of 350 °C. The crystallinity of the thin films increased by increasing the substrate temperature up 350 °C, the crystallinity improved after annealing temperature at 500 °C. The film annealed at 500 °C and deposited at 350 °C show lower absorption within the visible wavelength region. The band gap energy increased from E_g = 3.25 to 3.36 eV for without annealing and annealed films at 500 °C, respectively, indicating that the increase in the transition tail width. This is due to the increase in the electrical conductivity of the films after annealing temperature.     

Thin film properties by facing targets sputtering system

In this study, film thickness distribution and c-axis crystalline orientation of deposited thin films were studied after preparing Co–Cr thin films, a promising ultra-high density perpendicular magnetic recording media, with a facing targets sputtering (FTS) apparatus. Electrical discharge characteristics needed for the optimum operation of sputter device was also studied in order to prepare thin films of superior c-axis crystalline orientation with FTS method (apparatus) in which thin film of fine quality can be formed because temperature increase of substrate due to the bombardment of high-energy particles can be restrained.As a result of the study, it is confirmed that the FTS method can give stable working under broad magnetic field and range of gas pressure and stable electrical discharge under low Ar gas pressure. Film thickness of prepared thin film shows fairy regular distribution and could obtain good thin films whose dispersion angle of c-axis crystalline orientation is about 3.5°.     

Fs-pulsed laser deposition of PbTe and PbTe/Ag thermoelectric thin films

For the first time, thermoelectric thin films were fabricated by femtosecond pulsed laser deposition (fs-PLD) that represents a challenging technological solution for this application since it provides a correct film stoichiometry compared to the starting target, capability of native nanostructuring and a high deposition rate. In particular, this paper shows a preliminary work on PbTe and PbTe/Ag thin films deposited at different substrate temperatures by fs-PLD from a microcrystalline PbTe target. Structural, morphological and compositional characterizations of the deposited films were performed to demonstrate the formation of films composed by crystalline nanograins (about 35 nm size) and characterized by a correct stoichiometry. A remarkable deposition rate of 1.5 nm/s was evaluated. The electrical conductivity and the Seebeck coefficient (thermopower) were measured as a function of operating temperature to derive the thermoelectric power factor that was found to be less than a factor 2 with respect to the bulk materials. Finally, a discussion about the influence of compositional and structural properties of the deposited films on the related thermoelectric performances was presented.     

Effects of substrate temperature and Zn addition on the properties of Al-doped ZnO films prepared by magnetron sputtering

Al-doped ZnO (AZO) films prepared at different substrate temperature and AZO films with intentional Zn addition (ZAZO) during deposition at elevated substrate temperature were fabricated by radio frequency magnetron sputtering on glass substrate, and the resulting structural, electrical, optical properties together with the etching characteristics and annealing behavior were comparatively examined. AZO films deposited at 150 °C showed the optimum electrical properties and the largest grain size. XPS analysis revealed that AZO films deposited at elevated temperature of 450 °C contained large amount of Al content due to Zn deficiency, and that intentional Zn addition during deposition could compensate the deficiency of Zn to some extent. It was shown that the electrical, optical and structural properties of ZAZO films were almost comparable to those of AZO film deposited at 150 °C, and that ZAZO films had much smaller etching rate together with better stability in severe annealing conditions than AZO films due possibly to formation of dense structure.