低碳钢基体中离子注入镍和钼的电催化活性

离子注入不受相律和化学平衡的限制,也不受离子源和基体种类的约束,注入离子的能量和剂量精确可控,因而它是实现材料表面改性最有效的方法之一.自Grenness等发现注铂的钨电极,对H~+还原的电催化性能与纯铂接近之后,Wolf等将注入的Pt/RuO_2、Pt/C、Pt/WC电极用于H~+、O_2的电化学还原及甲酸的电化学氧化,其催化活性和稳定性均优于光滑的纯铂电极、Thompson等在钛基上注铂,用于催化析氢也得到类似的效果。近期文献报导,用热处理或电沉积方法制备的Ni-Mo、Ni-Mo-V 合金电极有很低的析氢超     

经热扩散处理的注镍钛电极的析氢反应研究

将高能离子注入电极表面可引入催化活性元素,进而能形成大量的活性中心,提高催化活性,作者将镍离子注入钛电极,结果使析氢过电位降低245 mV,比未注镍的钛电极的活性高得多。实验表明,电极的催化活性随表面镍浓度的增加而提高,由于注入离子浓度的     

钛基体中离子注入钯的电催化性能

钛基体在能量40keV下,离子注入1×10^1^6～1×10^1^8Pd^+/cm^2.在30%的KOH溶液中,研究了这些电极对氢和氧析出的电催化性能.结果表明, 离子注入电极的催化活性明显地优于未注入的钛基体,并随着离子注入剂量的增大,催化活性增大. 由极化测量求得有关动力学参数.这些数据表明,用高剂量钯离子注入的钛电极, 其电化学性能与钯电极相似.根据AES和XPS数据,讨论了注入电极表面的组成     

钛、玻璃碳基体中离子注人镍的电化学性能

钛、玻璃碳基体中离子注入5×10~(16)×10~(1(?)Ni~+离子cm~(-2).在30%KOH溶液中测试这些电极对氢析出反应的电催化性能.结果表明,离子注入电极的催化活性优于未注入的钛、玻璃碳基体.由极化测量求得动力学参数j、b和E.这些数据表明,在离子注入电极上,氢析出反应的速度决定步骤与镍电极相似,由电化学放电步骤控制。AES测量表明,镍在钛基体中的深度分布近似高斯分布,在阴极极化过程中,注入的镍没有损失,但明显地移向深处.用XPS研究注入前后Ni_(2p)和Ti_(2(?))电子结合能所产生的位移表明,离子注入可能在基体表面形成合金.     

钛基二氧化铅电催化电极的制备及电催化性能研究

以电沉积法制备了钛基PbO2电极，优化并确定了电极的制备工艺，以苯酚为目标有机物，考察了电极的电催化氧化性能，研究结果表明，该电极的电催化性能优于传统的DSA钛基RuO2电极。采用该电极，在10Ma/cm^2电流密度下通过0.72Ah电量后，可使100Ml、COD浓度为270mg/L的苯酚溶液中的苯酚完全分解，COD去除率为67.4%，单位电量COD降解量为0.254mgCOD/Ah，且电流效率随电流密度的增加而减小，初步研究了苯酚的电催化氧化机理，提出了苯酚的电催化氧化可能是由苯酚的直接电化学氧化为苯醌及苯醌的间接电化学氧化有机酸两部分组成。     

钛基氧化物电极的分形维数和电催化性能

分形几何学是近十几年来发展起来的新的数学理论,它对研究自然科学中的不规则几何行为具有独特的优势,尤其对材料的表面结构与性能研究有着重要的理论和实际意义。多相催化反应的一个显著特征就是在整个反应的一个显著特征就是在整个反应过程中都存在着反应界面,而界面的结构性质对反应过程有重要的影响。十几年前,有关这类界面的研究几乎都基于欧氏几何模型,在简单情况下视之为平面,在较复杂的情况下视之为曲面,即总是把表面视为二维面,但在很多情况下,这种做法与实际情况并不相符,例如,催化剂是多孔的,表面极不规则,存在各种晶体缺陷,而这些缺陷一般又是活性中心的集中处,面对这类粗糙的表面,经典的夫整几何学已显得无能为力,近年来,由Mandelbrot建立起来的分形几何学给人们解决诸多粗糙表面的复杂问题提供了新的途径和思路,本文计算了几种电极材料的表面分形维数,并对其催化性能进行了讨论。     

新型钛基镍电极对肼氧化反应的电催化活性

A novel titanium-supported nickel electrode(Ni/Ti) was fabricated by a hydrothermal process using NiSO4 and hydrazine as raw materials. The structure of Ni/Ti was characterized by SEM and EDS. Oxidation of hydrazine on the Ni/Ti electrode in 1 mol·L-1 NaOH solution was studied with cyclic voltammograms(CV) and chronoamperometry (CA).The results show that Ni/Ti electrode was electrochemically active towards hydrazine oxidation. The high current density was recorded on the Ni/Ti electrode,and the onset potential for the hydrazine oxidation was-0.3 V as the hydrazine concentration was 70 mmol·L-1. This novel nickel electrode would be a promising anodic material used in direct hydrazine fuel cells.     

含稀土的镍基合金的析氢电催化行为

用电沉积方法制备的Ni-Ce-P和Ni-La-P合金作阴极测得析氢阴极极化曲线,结果表明,合金电极上析氢速率比Ni电极上约大10倍,析氢电热政移＞200mV,显示出含稀土的镍基合金具有较高的析氢催化活性,根据XPS谱图讨论了析氢的电催化机制。     

循环伏安法用于钇在钼和镍电极上的电极过程研究

使用了较为简单的数学方法,对不溶性反应产物的电极过程的循环伏安理论公式进行了推导。并将推导结果应用于LiCl—KCl—YCl_3熔盐体系,钇在钼电极上的电极过程研究,获得了很好的结果。同时还对钇在镍电极上阴极还原进行了研究,循环伏安结果表明钇和镍能够拖成金属间化合物。能谱及X射线衍射结果表明,金属间化合物的组成为Ni_2Y。     

离子注入Pt的玻碳电极上甲酸和甲醛的电氧化

制备了离子注入Pt的玻碳电极(Pt/GC),注入剂量为5×10¹⁷ion/cm²,此电极的表面组成和各元素的浓度-深度分布用AES测量,注入Pt的价态用XPS测量.在0.5mol/LHClO₄溶液中,用Pt/GC电极和纯Pt电极研究了甲酸的电氧化行为,并在五种不同种类的电解质溶液中研究了甲醛的电氧化行为.结果表明,Pt/GC电极对甲酸和甲醛的电催化性能按真实表面积计算优于纯Pt电极.这可能与离子注入Pt过程中形成纳米团簇有关.此外,在同一电极上,甲醛在不同种类的电解质溶液中产生不同的氧化电流.说明阴离子对甲醛的电氧化过程有明显影响     

离子注入钯的钛电极上硝基苯的电化学还原

在室温下将１×１０￣（１７）～５×１０￣（１７）Ｐｄ￣＋·ｃｍ￣（－２）离子注入到钛基体中．通过ＡＥＳ测量了注入电极表面的组成和各元素的浓度－深度分布．用循环伏安法研究硝基苯在碱性溶液中,Ｐｄ／Ｔｉ电极上的电化学过程,结果表明,注钯的钛电极对硝基苯的电化学还原显示高的催化活性．用现场ＥＳＲ与电化学方法联用检测到硝基苯的单电子还原产物硝基苯阴离子自由基,用现场ＵＶ光谱法也检测到硝基苯的电还原产物苯胺．根据实验结果讨论了硝基苯电化学还原的机理．     

Electrochemical Behavior of Mitoxantrone and Its Determination at a Pt／C Implanted Modified Microelectrode

In a 0.02 mol/L Na2HPO4-KH2PO4(PBS) buffer solution(pH=6.82), the electrochemical behavior of mitoxantrone was studied by linear-sweep voltammetry and cyclic voltammetry at a Pt/C ion implantation modified microelectrode. A sensitive reduction peak was observed. The peak potential was -0.72 V(vs.SCE), the peak current was proportional to the concentration of mitoxantrone within the ranges of 7.0×10-8-9.0×10-7 mol/L and 1.0×10-6-2.4×10-5 mol/L, with a detection limit of 4.0×10-8 mol/L. The linear correlation coefficients were 0.9994 and 0.9992, respectively. This method has been applied to the direct determination of mitoxantrone in simulated urine. The recoveries were in the range from 96.2% to 105.9%. The reduction process was a quasi-reversible one with adsorptive characteristics at the Pt/C microelectrode. The electrode reaction rate constant ks and the electron transfer coefficient α of the system were determined to be 4.5 and 0.65 s-1, respectively. The experiments showed that Pt element had surely been implanted into the surface of the carbon fiber, and the atomic Pt improved the electrocatalytic activity. The Pt/C microelectrode had a good stability and reproducibility.     

柔红霉素在钴离子注入修饰玻碳电极上与DNA相互作用

用钴离子注入修饰电极研究了柔红霉素与DNA的相互作用.柔红霉素以嵌入方式与DNA发生作用,形成非电活性的结合物.加入DNA后,柔红霉素的电化学行为没有改变,仍为扩散控制.用非线性拟合得到柔红霉素与DNA的结合常数K=1.09×10⁸cm³/mol,结合数s≈4.DNA分子结构中的1个螺旋结合2个柔红霉素.     

碳化钨负载纳米铂催化剂的制备及其析氢催化性能

以喷雾干燥处理的偏钨酸铵为前驱体, 采用CH4/H2为还原碳化气氛, 利用固定床气固反应法制备了具有介孔结构的碳化钨(WC)粉体. 然后通过浸渍法制备了Pt/WC粉末催化剂. 通过XRD和SEM等测试手段对Pt/WC粉末样品进行了表征, 结果表明, Pt颗粒平均直径约为13.5 nm, 且均匀分散在介孔结构WC载体上. 采用循环伏安和线性扫描等方法研究了酸性介质中Pt/WC粉末微电极对电化学析氢过程的电催化行为. 结果表明, 该电极对析氢反应具有很好的电催化活性和化学稳定性. 通过测试和计算, Pt/WC粉末微电极的Tafel方程中的a值为0.292 V, 属于低超电势析氢材料, 析氢交换电流密度为4.42 mA·cm-2, 与铂电极在同一个数量级上, 当超电势为250 mV时, 其析氢反应的活化能为26.20 kJ·mol-1.     

Determination of Silver‐Modified Titanium Phosphate Nanoparticles by Voltammetric and Electrocatalytic Methods

The electrochemical determination of silver‐modified titanium phosphate nanoparticles (Ag‐TiPNPs) was performed using two electrochemical features of this novel kind of nanoparticles. First, a determination using the voltammetric activity of the silver from the Ag‐TiPNPs was carried out. Secondly, the electrocatalytic effect of Ag‐TiPNPs was shown for the first time to the hydrogen evolution reaction (HER) and the determination of these nanoparticles was performed by chronoamperometry using this electrocatalysis. Moreover, it was verified that the catalytic effect was due to the electroreduced silver since the unmodified titanium phosphate nanoparticles (TiPNPs) did not exhibit this effect. Detection limits as low as 0.1 and 0.75 ng µL^?1 of Ag‐TiPNPs were obtained with the voltammetric and chronoamperometric methods, respectively. 8‐channel screen‐printed electrochemical arrays (8xSPCEs) were employed as transducers to carry out these electrochemical studies, due to its low cost and time saving.     

Electrocatalytic Activity of Platinum Particles Electrodeposited onto Poly（vinylpyridine）Films

The electrocatalytic prpertics of platinum microparticles incorporated into poly-(vinylpyridine)(PVP) films ,a conducting polymer with good conductivity and stability,were investigated for hydrogen evolution and formic acid electrooxidation in acidic media,It was found that the catalytic effects depend mainly on the size and amounts of the platinum microparticles dispersed in the polymer layer.     

Electrocatalytic Properties and Sensor Applications of Fullerenes and Carbon Nanotubes

The electrochemical behavior of fullerene and fullerene derivatives are reviewed with special reference to their catalytic and sensor applications. Recent work on carbon nanotubes, used as catalyst supports in heterogeneous catalysis and sensor development is also presented. An overview of recent progress in the area of fullerene electrochemistry is included. Several cases of electrocatalytic dehalogenation of alkyl halides, assisted by the electrode charge transfer to fullerenes, are discussed. Research work on the electrocatalysis of biomolecules, such as hemin, cytochrome c, DNA, coenzymes, glucose, ascorbic acid, dopamine, etc. have also been considered. Based on the studies of the interaction of fullerenes, fullerene derivatives, and carbon nanotubes with other molecules and biomolecules in particular, the possibilities for the preparation of electrochemical sensors and their application in electroanalytical chemistry are highlighted.