NOx储存-还原催化剂Pt-Pd/BaO/TiAlO的制备及其抗硫性能

采用共沉淀-浸渍法制备了新型催化剂Pt-Pd/BaO/TiAlO,通过对催化剂进行NOx吸附储存实验、有硫(SO2)和无硫情况下的NOx储存-还原循环实验以及程序升温脱附、程序升温还原、N2吸附-脱附和X射线衍射等表征分析,考察了该催化剂的储存NOx性能以及抗硫性能.结果表明,在Pt-Pd/BaO/TiAlO中,复合氧化物TiAlO为储存NOx的组分兼载体,Ti和Al原子比为1∶2时,储存NOx能力最大;BaO(4%)作为助剂不但增加了催化剂的热稳定性,还提高了其储存NOx的能力.与Pt/BaO/γ-Al2O3相比,Pt-Pd/BaO/TiAlO具有良好的抗硫性能.Pt-Pd/BaO/TiAlO上吸附形成的硫化物稳定性较差,易被还原脱除,这是其抗硫性能良好的原因之一.     

高性能Pt/La-Ba-Al_2O_3/H-ZSM-5氢燃料汽车尾气处理催化剂

采用胶溶法制备了La-Ba-Al2O3(LBA)材料,以此为载体采用浸渍法制备了两种整体式催化剂Pt/LBA和Pt/LBA/H-ZSM-5,并评价了它们去除NO的性能.采用N2吸附-脱附和X射线衍射对载体材料进行了表征.结果表明,所制备的LBA仅有γ-Al2O3晶相存在,比表面积和孔容分别为144 m2/g和0.45 ml/g,具有较好的抗高温老化性能.在106～356 ℃间,催化剂Pt/LBA/H-ZSM-5上NO转化率很高,在153℃时达到最高为98.8%,此时N2选择性为81.3%.该催化剂有很大的潜在应用价值.     

Zn对Pt/SAPO-11催化剂物化及异构性能影响

通过浸渍法制备了Pt/SAPO-11催化剂, 分步浸渍法制备了Zn-Pt/SAPO-11双金属催化剂. 通过X射线衍射、低温氮物理吸附、氨程序升温脱附和吡啶吸附红外等手段对所得样品进行了表征. 实验结果表明, 助剂Zn的引入导致了催化剂的比表面积和孔容降低, B酸量减少而L酸量增加, 总酸量有所增加. 在300～380 ℃范围内对正庚烷的临氢异构化反应考察发现, 引入金属助剂Zn可以明显改变正庚烷的转化率, 而对C₇异构体的选择性影响不明显. 当Zn质量分数为0.2%, Pt质量分数为0.2%时, Zn-Pt/SAPO-11催化剂的正庚烷转化率及C₇异构体收率达到最大值; Zn含量继续增加时, 正庚烷转化率及C₇异构体收率均随之下降. 实验结果表明, 双功能催化剂中金属功能与酸性功能的匹配对正庚烷临氢异构化反应非常重要.     

介孔Ce1-xZrxO2负载的Cu基催化剂在富氢条件下催化CO选择性氧化

采用多元醇为模板剂合成了介孔Ce1-xZrxO2(x=0.2,0.35,0.5)固溶体材料,并以其为载体负载CuO制备了Cu基催化剂.应用透射电子显微镜、X射线衍射、程序升温还原、程序升温脱附和N2吸附-脱附等技术对载体及催化剂进行了表征,并研究了Zr的取代比例x值对载体和Cu基催化剂性能的影响.结果表明,所有Ce1-xZrxO2样品均为介孔材料,其中Ce0.5-Zr0.5O2载体样品有较大的比表面积(181m2/g),CuO/Ce0.5Zr0.5O2催化剂样品在富氢条件下有较高的催化CO选择性氧化反应的活性和选择性.与其他催化剂样品相比,CuO/Ce0.5Zr0.5O2催化剂样品中形成的活性中心更多,分散性更好,对CO的吸附量更大,CO脱附温度更低,活性组分与载体的相互作用更强。     

Zr基载体负载Pd催化剂用于贫燃天然气汽车尾气净化

 采用共沉淀法制备了 ZrO2, Y0.1Zr0.9Ox, Ce0.1Zr0.9Ox 和 Al0.1Zr0.9Ox 系列 Zr 基载体, 并用 N2 吸附-脱附和 X 射线衍射对其进行了表征. 再以此为载体, 采用浸渍法制备了整体式负载 Pd 催化剂, 催化剂涂层的涂覆量为 180 g/L 左右, Pd 含量为 1.25%. 测定了催化剂上 Pd 的分散度. 在模拟的贫燃天然气汽车尾气中考察了催化剂的活性, 并在尾气中有或无 SO2 存在的条件下比较了催化剂活性的差异. 结果表明, Y3+, Ce4+ 或 Al3+ 改性载体负载的 Pd 催化剂的耐硫性能明显改善; 无论尾气中是否存在 SO2, 以 Y3+ 或 Al3+ 改性载体负载的 Pd 催化剂的活性均明显高于 ZrO2 负载体的 Pd 催化剂.     

新型Sn改性固体酸催化剂SO42-/TiO2催化1,6-己二醇二丙烯酸酯合成

丙烯酸酯单体包括通用丙烯酸酯和特种丙烯酸酯,不仅是高分子化合物的基本单体,也是化工有机反应的原料.特种丙烯酸酯在工业合成中虽然规模小,产量低,但已经应用到皮革、造纸、纺织、涂料、粘合剂和辐射固化技术等许多领域.辐射固化材料主要包括活性稀释剂、光引发剂、齐聚物和添加剂等.其中,齐聚物的主要成分就是丙烯酸酯单体的聚合物.然而,丙烯酸酯的合成工业难度不在合成路线,而是反应所使用的催化剂.浓硫酸和对甲苯磺酸等液体酸催化剂由于后续反应难分离、腐蚀设备、污染环境和催化剂不易回收等缺点,逐渐被固体酸催化剂所替代.而SO42-/MOx固体酸催化剂虽然没有这些缺点,但是催化剂比表面积较小,热稳定性较差,酸性难以调节.为了合成1,6-己二醇二丙烯酸酯,本文首先对多种催化剂进行了筛选,获得了活性高且稳定好的SO42-/TiO2-SnO2改性催化剂.采用N2吸附-脱附、X射线衍射(XRD)、扫描电镜(SEM)、红外光谱(IR)、吡啶红外、氨程序升温脱附和热重等技术考察了催化剂的结构特征、表面酸强度和热稳定性.通过N2吸附-脱附可知,Sn改性后催化剂的比表面积增加到126m2/g,较改性前有明显提高.XRD结果表明,Sn能较好地分散在催化剂载体表面,且随着Sn的加入,催化剂晶粒尺寸逐渐减小.SEM照片进一步证实了N2吸附-脱附和XRD结果.催化剂表面酸性通过吡啶红外和氨程序升温脱附测定.由IR图谱可知,固体酸催化剂SO42-/TiO2-SnO2中SO42-和金属原子的连接方式发生变化,更趋于螯合双齿配位结合.通过吡啶红外可以看出,当Sn添加量为6％时,改性催化剂的酸性位由未改性催化剂的59 μmol/g增加到167 μmol/g.氨程序升温脱附.结果表明,多次使用后催化剂的酸分布几乎不变,但酸量有所下降,这可能与催化剂表面硫源的损失有关.另外,通过热重对催化剂的热稳定性进行了分析,由于高温条件下孔结构容易坍塌导致硫源损失,因此第二个失重峰归属为SO42-的脱除峰.Sn改性后的催化剂中SO42-的脱除峰后移100℃左右,且失重量为5O42-/TiO2的2倍多,说明SO42-/TiO2-SnO2催化剂有更好的热稳定性和更多的酸性位.以1,6-己二醇和丙烯酸酯化反应中1,6-己二醇转化率和1,6-己二醇二丙烯酸酯收率为指标评价了催化剂的催化活性.主要研究了催化剂中Sn含量的影响,并对酯化反应条件进行了优化.结果表明,最适宜的Sn含量为6％,最优的反应条件为:酸/醇比3.5,催化剂添加量7％,酯化温度130℃,酯化时间3h.最后考察了改性催化剂的稳定性.结果表明,催化剂使用10次后,1,6-己二醇转化率仍可达81％以上,固体酸催化剂SO42-/TiO2-SnO2有良好的稳定性.     

新型Sn改性固体酸催化剂SO_4~(2-)/TiO_2催化1,6-己二醇二丙烯酸酯合成（英文）

丙烯酸酯单体包括通用丙烯酸酯和特种丙烯酸酯,不仅是高分子化合物的基本单体,也是化工有机反应的原料.特种丙烯酸酯在工业合成中虽然规模小,产量低,但已经应用到皮革、造纸、纺织、涂料、粘合剂和辐射固化技术等许多领域.辐射固化材料主要包括活性稀释剂、光引发剂、齐聚物和添加剂等.其中,齐聚物的主要成分就是丙烯酸酯单体的聚合物.然而,丙烯酸酯的合成工业难度不在合成路线,而是反应所使用的催化剂.浓硫酸和对甲苯磺酸等液体酸催化剂由于后续反应难分离、腐蚀设备、污染环境和催化剂不易回收等缺点,逐渐被固体酸催化剂所替代.而SO_4~(2-)/MOx固体酸催化剂虽然没有这些缺点,但是催化剂比表面积较小,热稳定性较差,酸性难以调节.为了合成1,6-己二醇二丙烯酸酯,本文首先对多种催化剂进行了筛选,获得了活性高且稳定好的SO_4~(2-)/TiO_2-SnO_2改性催化剂.采用N2吸附-脱附、X射线衍射(XRD)、扫描电镜(SEM)、红外光谱(IR)、吡啶红外、氨程序升温脱附和热重等技术考察了催化剂的结构特征、表面酸强度和热稳定性.通过N2吸附-脱附可知,Sn改性后催化剂的比表面积增加到126m~2/,较改性前有明显提高.XRD结果表明,Sn能较好地分散在催化剂载体表面,且随着Sn的加入,催化剂晶粒尺寸逐渐减小.SEM照片进一步证实了N2吸附-脱附和XRD结果.催化剂表面酸性通过吡啶红外和氨程序升温脱附测定.由IR图谱可知,固体酸催化剂SO_4~(2-)/TiO_2-SnO_2中SO_4~(2-)和金属原子的连接方式发生变化,更趋于螯合双齿配位结合.通过吡啶红外可以看出,当Sn添加量为6%时,改性催化剂的酸性位由未改性催化剂的59μmol/g增加到167μmol/g.氨程序升温脱附.结果表明,多次使用后催化剂的酸分布几乎不变,但酸量有所下降,这可能与催化剂表面硫源的损失有关.另外,通过热重对催化剂的热稳定性进行了分析,由于高温条件下孔结构容易坍塌导致硫源损失,因此第二个失重峰归属为SO_4~(2-)的脱除峰.Sn改性后的催化剂中SO_4~(2-)的脱除峰后移100 oC左右,且失重量为SO_4~(2-)/TiO_2的2倍多,说明SO_4~(2-)/TiO_2-SnO_2催化剂有更好的热稳定性和更多的酸性位.以1,6-己二醇和丙烯酸酯化反应中1,6-己二醇转化率和1,6-己二醇二丙烯酸酯收率为指标评价了催化剂的催化活性.主要研究了催化剂中Sn含量的影响,并对酯化反应条件进行了优化.结果表明,最适宜的Sn含量为6%,最优的反应条件为:酸/醇比3.5,催化剂添加量7%,酯化温度130oC,酯化时间3 h.最后考察了改性催化剂的稳定性.结果表明,催化剂使用10次后,1,6-己二醇转化率仍可达81%以上,固体酸催化剂SO_4~(2-)/TiO_2-SnO_2有良好的稳定性.     

含硫液体烃燃料水蒸气重整制氢Ⅰ. Pt/Ce0.8Gd0.2O1.9催化剂的制备、表征和抗硫性能

 以柠檬酸溶胶-凝胶法合成的具有萤石结构的Ce0.8Gd0.2O1.9(CGO)复合氧化物为载体,用初湿浸润法制备了负载型Pt催化剂. 纯异辛烷的重整反应结果显示, 600和800 ℃焙烧的催化剂达到了热力学平衡转化, 1000 ℃焙烧会导致Pt的聚集和氧化物的严重烧结,因而催化剂活性较差. 抗硫测试表明, 800 ℃焙烧的催化剂抗硫性能最好,在300 μg/g硫存在下, 100 h内异辛烷均接近完全转化; 在500 μg/g硫存在下催化剂仍表现出良好抗硫性能. 程序升温还原和X射线分析结果显示, 800 ℃焙烧时Pt与CGO载体间的相互作用最强,同时催化剂具有良好的热稳定性,这是催化剂具有抗硫性能并且抗硫作用持久的根本原因. 反应条件下噻吩硫完全转化成H2S, 硫的转化可能是通过氧化-还原机理进行的.     

Ni2P/SiO2 和Ni/SiO2 催化剂甘油氢解反应性能比较:催化剂活性及产物选择性影响因素的探讨（英文）

采用浸渍法及程序升温还原法制备了Ni2P/SiO2和Ni/SiO2催化剂,利用N2吸附-脱附、X射线衍射、X射线荧光、CO化学吸附、氢气程序升温脱附及氨气程序升温脱附等手段对催化剂进行了表征并用于甘油氢解反应.结果表明,Ni2P/SiO2和Ni/SiO2具有相近的表面Ni密度,但前者表面酸中心和表面氢物种(包括吸附氢和溢流氢)密度明显更高,且在甘油氢解反应中的活性也更高,这与其酸性中心与金属中心之间的协同作用有关.Ni2P/SiO2催化剂上主要产物为1,2-丙二醇及1-丙醇,而Ni/SiO2催化剂上主要产物为1,2-丙二醇、乙二醇和乙醇.提高反应温度和H2压力不能促进Ni2P/SiO2上乙醇和乙二醇的生成,但促进了1,2-丙二醇进一步氢解转化为1-丙醇.由此可见,Ni2P/SiO2具有较强的C-O键断裂活性及较弱的C-C键断裂活性,这可能分别与其较多酸性中心和电子及几何结构性质密切相关.     

Ni_2P/SiO_2 和Ni/SiO_2 催化剂甘油氢解反应性能比较:催化剂活性及产物选择性影响因素的探讨(英文)

采用浸渍法及程序升温还原法制备了Ni2P/SiO2和Ni/SiO2催化剂,利用N2吸附-脱附、X射线衍射、X射线荧光、CO化学吸附、氢气程序升温脱附及氨气程序升温脱附等手段对催化剂进行了表征并用于甘油氢解反应.结果表明,Ni2P/SiO2和Ni/SiO2具有相近的表面Ni密度,但前者表面酸中心和表面氢物种(包括吸附氢和溢流氢)密度明显更高,且在甘油氢解反应中的活性也更高,这与其酸性中心与金属中心之间的协同作用有关.Ni2P/SiO2催化剂上主要产物为1,2-丙二醇及1-丙醇,而Ni/SiO2催化剂上主要产物为1,2-丙二醇、乙二醇和乙醇.提高反应温度和H2压力不能促进Ni2P/SiO2上乙醇和乙二醇的生成,但促进了1,2-丙二醇进一步氢解转化为1-丙醇.由此可见,Ni2P/SiO2具有较强的C-O键断裂活性及较弱的C-C键断裂活性,这可能分别与其较多酸性中心和电子及几何结构性质密切相关.     

Dichroism of absorption and polarization of phosphorescence of molecules of the closed form of nitrobenzospirothiopyran

The spectral-polarization characteristics of absorption and phosphorescence of molecules of the initial form of nitro-substituted indolinospirobenzothiopyran were studied in oriented polyethylene films and in solutions with different polarity. An oscillator model of the electron transitions responsible for the formation of absorption and luminescence spectra was suggested. It was established that the principal differences in the spectral and photophysical properties of the compound studied and its oxygen-containing analog are associated with the fact that the electronegativity of the S atom is lower than that of the O atom. Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 6, pp. 1143–1146, June, 1997.     

非那雄胺合成工艺改进

非那雄胺能抑制5α-还原酶的活性,明显降低二氢睾酮水平,是一种治疗良性前列腺增生的有效药品。该合成工艺以甾烯酮酸为原料,将其与氯化亚砜反应,无须分离即与叔丁胺反应得17β-酰胺化合物,再氧化开环,环合,氢化,脱氢合成了非那雄胺。经元素分析、IR、1HNMR、13CNMR、MS分析表征了其结构。该法无须使用昂贵的2,2-二吡啶二硫化物和剧毒药品苯亚硒酸酐,且以乙酸铵代替氨气,降低了对设备的要求和腐蚀,更适用于工业生产。     

Determination of heats of detonation and influence of components of composite explosives on heats of detonation of high explosives

The heats of detonation of 20 simple high explosives and explosive mixtures were determined by means of an adiabatic detonation calorimeter designed by the authors. The results indicated that the performance of the instrument was reliable and the experimental data were very accurate. For explosive mixtures, there was a linear accumulative relationship between the heats of detonation of the explosive mixture and its components. Accordingly, the heats of detonation of explosive mixtures could be calculated directly from the heats of detonation of simple explosives and the characteristic heats of other components. The experiments showed that the gold or brass shell of the cylindrical charge could be substituted by a thick-walled porcelain shell, which had the advantage of cheapness.

     

Synthesis of phenolic components of Grains of Paradise

Two vanilloids, (5E)-8-(4-hydroxy-3-methoxyphenyl)oct-5-en-4-one (1) and 4-[3-hydroxydecyl]-2-methoxyphenol (2), isolated from the dried seeds of Grains of Paradise (Aframomum melegueta), were synthesized; the latter compound was made as the S-enantiomer and the material derived from the seeds was found to be a 1:1.7 mixture of the R and S isomers. The synthetic route used should allow the preparation of analogs having extended alkyl chains and consequently different lipophilicity, and 3, a homolog of 2, was also prepared.     

Summary of development of the theory of stability of colloids and thin films

In this review, the research of the author in the field of colloidal systems is summarized. The factors influencing colloidal stability are systematized and analyzed. Examples are presented to illustrate the practical utilization of the theory of stability of colloids and thin films.This review was prepared on the basis of the works of the author, which were awarded the State Premium for 1991 in the field of science and technology, chemistry section.Institute of Physical Chemistry, Russian Academy of Sciences, 117915 Moscow. Translated from Izvestiya Akademii Nauk, Seriya Khimicheskaya, No. 8, pp. 1708–1717, August, 1992.     

Study of hydration of two cements of different strengths

Main hydration products of two cement pastes, i.e. CSH-gel, portlandite (P) (and specific surface S) were studied by static heating, and by SEM, TEM and XRD, as a function of cement strength (C-33 and C-43) hydration time (th) and subsequent hydration in water vapour.Total change in mass on hydration and air drying, M_o, increased with strength of cement paste and with hydration time. Content of water escaping at 110 to 220°C, defined as water bound with low energy, mainly interlayer and hydrate water, was independent on cement strength but its content increased with (th). Content of chemically bound (zeolitic) water in CSH-gel, escaping at 220-400°C, was slightly dependent on strength and increased with (th). It was possibly derived from the dehydroxylation of CSH-gel and AFm phase. Portlandite water, escaping at 400-500°C, was independent on cement strength and was higher on longer hydration. Large P crystals were formed in the weaker cement paste C-33. Smaller crystals were formed in C-43 but they increased with (th). Carbonate formated on contact with air (calcite, vaterite and aragonite), decomposed in cement at 600-700^oC. It was high in pastes C-33(1 month) and C-43(1 month), i.e. 5.7 and 3.3%, respectively; it was less than 1% after 6 hydration months (low sensitivity to carbonation) in agreement with the XRD study showing carbonates in the air dry paste (1month), and its absence on prolonged hydration (6 months) and on acetone treatment. Water vapour treatment of (6 months) pastes or wetting-drying increased this sensitivity.Nanosized P-crystals, detected by TEM, could contribute to the cement strength; carbonate was observed on the rims of gel clusters.This revised version was published online in November 2005 with corrections to the Cover Date.     

氯氧化镁生成热的研究

用氧化镁氯化镁水溶液制备了8水合氯氧化镁[nMg(OH)2·MgCl2·8H2O], 并测定了其在盐酸中的溶解热, 实验结果表明, 氯氧化镁溶解热与n值呈线性关系, 根据溶解热求出5Mg(OH)2·MgCl2·8H2O和3Mg(OH)2·MgCl2·8H2O的生成热分别为-7727.1和5888.1kJ·mol^1^-。     

Thermodynamics of the formation of oxosulfides of rare-earth elements

The enthalpies of solution of several oxosulfides of rare-earth elements and the high-temperature enthalpies of oxosulfides and oxosulfates of lanthanum and yttrium were measured using solution calorimetry and high-temperature microcalorimetry techniques. Standard enthalpies of formation and some thermodynamic properties of oxosulfides and oxosulfates were calculated. Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 2 pp. 294–297, February, 1997.     

探究“铁的锈蚀条件”实验创新设计

设计了铁的锈蚀实验,说明了铁钉的处理方法,增加了温度、酸、碱的影响条件,实现了铁跟蒸馏水及空气中氧气快速反应而生锈,使实验在5 min左右就能够得到准确的结果。