等浓度的氯化铵和硫酸铵溶液哪个pH高

有中学化学参考资料题:0.10 mol/L的NH4Cl和(NH4)2SO4溶液哪个pH值高?这似乎是个中学生可做的简单题目,仔细考虑不是如此.如果简单地认为盐酸和硫酸都是强酸,而硫酸是二元酸,硫酸铵溶液中铵盐浓度为0.20 mol/L,那么NH4Cl溶液pH高,那是不妥的.硫酸是二元酸,第一个氢离子能完全电离,第二个氢离子部分电离,如此考虑情况怎么样呢?是不是答案发生变化?这要通过计算来说明.     

Enhanced efficiency and stability in Sn-based perovskite solar cells with secondary crystallization growth

The conversion efficiencies reported for Tin(Sn)halide-based perovskite solar cells(PSCs)fall a large gap behind those of lead halide-based PSCs,mainly because of poor film quality of the former.Here we report an efficient strategy based on a simple secondary crystallization growth(SCG)technique to improve film quality for tin halide-based PSCs by applying a series of functional amine chlorides on the perovskite surface.They were discovered to enhance the film crystallinity and suppress the oxidation of Sn²⁺remarkably,hence reduce trap state density and non-irradiative recombination in the absorber films.Furthermore,the SCG film holds the band levels matching better with carrier transport layers and herein favoring charge extraction at the device interfaces.Consequently,a champion device efficiency of 8.07% was achieved alo ng with significant enhancements in VOC and JSC,in contrast to 5.35% of the control device value.Moreover,the SCG film-based devices also exhibit superior stability comparing with the control one.This work explicitly paves a novel and general strategy for developing high performance lead-free PSCs.     

Energy level engineering of charge selective contact and halide perovskite by modulating band offset:Mechanistic insights

Mixed cation and anion based perovskites solar cells exhibited enhanced stability under outdoor conditions,however,it yielded limited power conversion efficiency when TiO₂ and Spiro-OMeTAD were employed as electron and hole transport layer(ETL/HTL)respectively.The inevitable interfacial recombination of charge carriers at ETL/perovskite and perovskite/HTL interface diminished the efficiency in planar(n-i-p)perovskite solar cells.By employing computational approach for uni-dimensional device simulator,the effect of band offset on charge recombination at both interfaces was investigated.We noted that it acquired cliff structure when the conduction band minimum of the ETL was lower than that of the perovskite,and thus maximized interfacial recombination.However,if the conduction band minimum of ETL is higher than perovskite,a spike structure is formed,which improve the performance of solar cell.An optimum value of conduction band offset allows to reach performance of 25.21%,with an open circuit voltage(VOC)of 1231 mV,a current density JSC of 24.57 mA/cm² and a fill factor of 83.28%.Additionally,we found that beyond the optimum offset value,large spike structure could decrease the performance.With an optimized energy level of Spiro-OMeTAD and the thickness of mixed-perovskite layer performance of 26.56% can be attained.Our results demonstrate a detailed understanding about the energy level tuning between the charge selective layers and perovskite and how the improvement in PV performance can be achieved by adjusting the energy level offset.     

A new strategy to access Co/N co-doped carbon nanotubes as oxygen reduction reaction catalysts

Carbon nanotubes(CNTs),as one-dimensional nanomaterials,show great potential in energy conversion and storage due to their efficient electrical conductivity and mass transfer.However,the security risks,time-consuming and high cost of the preparation process hinder its further application.Here,we develop that a negative pressure rather than a following gas environment can promote the generation of cobalt and nitrogen co-doped CNTs(Co/N-CNTs) by using cobalt zeolitic imidazolate framework(ZIF-67) as a precursor,in which the negative pressure plays a key role in adjusting the size of cobalt nanoparticles and stimulating the rearragement of carbon atoms for forming CNTs.Importantly,the obtained Co/N-CNTs,with high content of pyridinic nitrogen and abundant graphitized structure,exhibit superior catalytic activity for oxygen reduction reaction(ORR) with half-wave potential(E_1/2) of 0.85 V and durability in terms of the minimum current loss(2%) after the 30,000 s test.Our development provides a new pathway for large-scale and cost-effective preparation of metal-doped CNTs for various applications.     

Recent Advances of Pure Organic Room Temperature Phosphorescence Materials for Bioimaging Applications

Bioimaging,as a powerful and helpful tool,which allows people to investigate deeply within living organisms,has contributed a lot for both clinical theranostics and scientific research.Pure organic room temperature phosphorescence(RTP)materials with the unique features of ultralong luminescence lifetime and large Stokes shift,can efficiently avoid biological autofluorescence and scattered light through a time-resolved imaging modality,and thus are attracting increasing attention.This review classifies pure organic RTP materials into three categories,including small molecule RTP materials,polymer RTP materials and supramolecular RTP materials,and summarizes the recent advances of pure organic RTP materials for bioimaging applications.     

Stabilizing High-voltage Cathode Materials for Next-generation Li-ion Batteries

The pressing demand for high-energy/power lithium-ion batteries requires the deployment of cathode materials with higher capacity and output voltage.Despite more than ten years of research,high-voltage cathode mate-rials,such as high-voltage layered oxides,spinel LiNi0.5Mn1.5O4,and high-voltage polyanionic compounds still cannot be commercially viable due to the instabilities of standard electrolytes,cathode materials,and cathode electrolyte interphases under high-voltage operation.This paper summarizes the recent advances in addressing the surface and interface issues haunting the application of high-voltage cathode materials.The understanding of the limitations and advantages of different modification protocols will direct the future endeavours on advancing high-energy/power lithium-ion batteries.     

Conformational Properties of Comb-shaped Polyelectrolytes with Negatively Charged Backbone and Neutral Side Chains Studied by a Generic Coarse-grained Bead-and-Spring Model

A generic coarse-grained bead-and-spring model,mapped onto comb-shaped polycarboxylate-based(PCE)superplasticizers,is developed and studied by Langevin molecular dynamics simulations with implicit solvent and explicit counterions.The agreement on the radius of gyration of the PCEs with experiments shows that our model can be useful in studying the equilibrium sizes of PCEs in solution.The effects of ionic strength,side-chain number,and side-chain length on the conformational behavior of PCEs in solution are explored.Single-chain equilibrium properties,including the radius of gyration,end-to-end distance and persistenee length of the polymer backbone,shape-asphericity parameter,and the mean span dimension,are determined.It is found that with the increase of ionic strength,the equilibrium sizes of the polymers decrease only slightly,and a linear dependenew of the persistence length of backbone on the Debye screening length is found,in good agreement with the theory developed by Dobrynin.Increasing side-chain numbers and/or side-chain lengths increases not only the equilibrium sizes(radius of gyration and mean span)of the polymer as a whole,but also the persistence length of the backbone due to excluded volume interactions.     

Suppressing trap states and energy loss by optimizing vertical phase distribution through ternary strategy in organic solar cells

Suppressing the trap-state density and the energy loss via ternary strategy was demonstrated.Favorable vertical phase distribution with donors(acceptors)accumulated(depleted)at the interface of active layer and charge extraction layer can be obtained by introducing appropriate amount of polymer acceptor N2200 into the systems of PBDB-T:IT-M and PBDB-TF:Y6.In addition,N2200 is gradiently distributed in the vertical direction in the ternary blend film.Various measurements were carried out to study the effects of N2200 on the binary systems.It was found that the optimized morphology especially in vertical direction can significantly decrease the trap state density of the binary blend films,which is beneficial for the charge transport and collection.All these features enable an obvious decrease in charge recombination in both PBDB-T:IT-M and PBDB-TF:Y6 based organic solar cells(OSCs),and power conversion efficiencies(PCEs)of 12.5%and 16.42%were obtained for the ternary OSCs,respectively.This work indicates that it is an effective method to suppress the trap state density and thus improve the device performance through ternary strategy.     

Three-dimensionalization via control of laser-structuring parameters for high energy and high power lithium-ion battery under various operating conditions

Laser-structuring is an effective method to promote ion diffusion and improve the performance of lithium-ion battery(LIB)electrodes.In this work,the effects of laser structuring parameters(groove pitch and depth)on the fundamental characteristics of LIB electrode,such as interfacial area,internal resistances,material loss and electrochemical performance,are investigated,LiNi_0.5Co_0.2Mn_0.3O₂ cathodes were structured by a femtosecond laser by varying groove depth and pitch,which resulted in a material loss of 5%-14%and an increase of 140%-260%in the in terfacial area between electrode surface and electrolyte.It is shown that the importance of groove depth and pitch on the electrochemical performance(specific capacity and areal discharge capacity)of laser-structured electrode varies with current rates.Groove pitch is more im porta nt at low current rate but groove depth is at high curre nt rate.From the mapping of lithium concentration within the electrodes of varying groove depth and pitch by laser-induced breakdown spectroscopy,it is verified that the groove functions as a diffusion path for lithium ions.The ionic,electronic,and charge transfer resistances measured with symmetric and half cells showed that these internal resistances are differently affected by laser structuring parameters and the changes in porosity,ionic diffusion and electronic pathways.It is demonstrated that the laser structuring parameters for maximum electrode performance and minimum capacity loss should be determined in consideration of the main operating conditions of LIBs.     

Mesh-like vertical structures enable both high areal capacity and excellent rate capability

In order to balance electrochemical kinetics with loading level for achieving efficient energy storage with high areal capacity and good rate capability simultaneously for wearable electronics,herein,2 D meshlike vertical structures(NiCo_2 S_4@Ni(OH)_2) with a high mass loading of 2.17 mg cm^-2 and combined merits of both 1 D nanowires and 2 D nanosheets are designed for fabricating flexible hybrid supercapacitors.Particularly,the seamlessly interconnected NiCo_2 S_4 core not only provides high capacity of 287.5 μAh cm^-2 but also functions as conductive skeleton for fast electron transport;Ni(OH)_2 sheath occupying the voids in NiCo_2 S_4 meshes contributes extra capacity of 248.4 μAh cm^-2;the holey features guarantee rapid ion diffusion along and across NiCO_2 S_4@Ni(OH)_2 meshes.The resultant flexible electrode exhibits a high areal capacity of 535.9 μAh cm^-2(246.9 mAh g^-1) at 3 mA cm^-2 and outstanding rate performance with 84.7% retention at 30 mA cm^-2,suggesting efficient utilization of both NiCo_2 S_4 and Ni(OH)_2 with specific capacities approaching to their theoretical values.The flexible solid-state hybrid device based on NiCo_2 S_4@Ni(OH)_2 cathode and Fe_2 O_3 anode delivers a high energy density of 315 μWh cm^-2 at the power density of 2.14 mW cm^-2 with excellent electrochemical cycling stability.     

Gas-phase photocatalytic oxidation of benzene over titanium dioxide loaded on Bi_(12)TiO_(20)

TiO2 was prepared by sol-gel method using tetrabutyl titanate as precursor. TiO2 was loaded on Bi12TiO20. The photocatalyst with different TiO2 loading was calcined at 723 K. The photocatalytic activity of decomposition gaseous benzene was investigated in a batch reactor. The prepared photocatalyst was characterized by UV-vis diffuse reflectance. The result showed that TiO2/Bi12TiO20 absorbed much more ultraviolet light than Ti02 in the ultraviolet light region and showed red shift. The results indicated that the prepared photocatalyst can greatly promote the photocatalytic activity. The 2.0% TiO2/Bi12TiO20 system exhibited the highest photocatalytic activity.     

球磨法制备复合光催化剂Bi12TiO20/ZnO及其光催化性能

本文用水作为分散介质,采用球磨法掺杂一定量的Bi₁₂TiO₂₀于ZnO中制备复合光催化剂Bi₁₂TiO₂₀/ZnO. 利用UV-Vis、XRD和SEM等仪器对样品进行了分析与表征. 通过对甲基橙的氧化来研究其光催化活性. 结果表明,光催化剂Bi₁₂TiO₂₀/ZnO对甲基橙氧化的催化活性高于氧化锌的催化活性.当Bi₁₂TiO₂₀的掺杂量为0.5%(质量分数),球磨时间为12 h,焙烧温度为300℃时,光照20 min后,复合光催化剂Bi₁₂TiO₂₀/ZnO对甲基橙的降解率可达到95.2%.     

局部化学法合成K0.5Bi0.5TiO3片状晶粒及其反应机理研究

以含铋层状Bi4Ti3O12(BIT)晶粒作为反应前驱体, 通过熔盐环境下的局部化学反应法制备了片状钛酸铋钾(K0.5Bi0.5TiO3, KBT)陶瓷粉体晶粒. 分析结果表明, 所制备的KBT陶瓷晶粒平均直径约为15～20 μm, 厚度小于2 μm. 分析了由含铋层状型BIT向钙钛矿型KBT片晶转化的形成机制, 并讨论了反应路径对最终产物形貌的影响规律.     

Ti(Ⅳ)掺杂Bi_2O_3电子结构和可见光催化活性的原理

密度泛函理论(DFT)计算对掺杂体系新型环境光催化剂设计开发具有指导意义.基于DFT框架下的第一性原理平面波超软赝势方法(USPP),对α、β、γ、δ-Bi2O3晶体几何结构分别进行了优化计算,从理论上得到了Bi2O3的总体态密度(TDOS)和Bi、O原子的分波态密度(PDOS).在此基础上对Bi2O3超晶胞进行Ti(IV)的掺杂计算,讨论了Ti(IV)掺杂对各种Bi2O3的电子结构和光吸收特性的影响.结果表明Ti(IV)掺杂Bi2O3晶体后,Ti(IV)的3d轨道进入禁带并与O2p、Bi6p轨道作用,使禁带宽度(Eg)变小,Bi2O3的吸收边红移,从而有助于Bi2O3光催化活性的改善.通过水热合成法制备的Ti(IV)掺杂Bi2O3样品的紫外-可见光漫反射光谱验证了计算的结果.在光催化降解有机染料结晶紫的实验中,光催化剂活性的改善进一步得到证实.     

染料敏化TiO_2可见光光催化降解罗丹明B

苝二酰亚胺(PTCDI)是一种n型半导体材料,在可见光区有很强的吸收,广泛用于有机光伏器件领域的研究.以PTCDI为光敏剂制备TiO2可见光光催化剂用以降解环境污染物的研究还鲜有报道.本文采用水热法制备苝二酰亚胺(PTCDI)和四磺酸酞菁铜(CuPcTs)敏化的TiO2复合样品.利用XRD、TEM、UV-Vis和荧光光谱对复合样品进行表面形貌和结构表征,以可见光光催化降解罗丹明B为模型反应.研究结果表明,染料敏化能够有效地拓宽样品的吸收光谱范围,提高可见光光催化活性;电子收集型的共敏化复合样品体现出了优于单一染料敏化样品的光催化活性.应用能带结构理论,阐明了单一染料敏化和共敏化样品的光生电子转移机制.     

钛酸铋系化合物的光催化性能研究

采用化学溶液分解法制备了钛酸铋化合物: Bi₁₂TiO₂₀, Bi₄Ti₃O₁₂和Bi₂Ti₂O₇, 并采用XRD表征了其结构. 用TEM观察发现其平均粒径＞100 nm, UV-Vis漫反射谱测定显示它们在可见光区均呈现极强的吸收特征. 紫外光照射下甲基橙的光催化降解脱色实验表明, 三种钛酸铋化合物均具有较强的光催化活性, 其中, Bi₁₂TiO₂₀的光催化活性最强, 几乎与P-25相同. 钛酸铋化合物光催化性能的不同在于它们具有不同的晶相结构和电子结构.     

掺杂改性纳米TiO2降解挥发性污染物及产物研究

本文系统研究了水热法制备的铁掺杂纳米TiO₂和氮掺杂纳米TiO₂在可见光照射下对挥发性有机物(volatile organic compounds,VOCs)的降解能力和降解产物.铁掺杂纳米TiO₂和氮掺杂TiO₂对光的吸收边分别红移到540 nm和580 nm;在可见光下具有良好的催化活性,24 h内对挥发性有机物的降解率达20%—50%,降解后的最终产物可能主要为CO₂.     

紫外光下纳米TiO2 薄膜亲水性机理的电化学研究

The nanometer films of TiO2 were prepared by sol-gel method on ITO（Indium-tin oxide,SnO2:In） substrate. The TiO2 film was the anatase phase with a particle size of 100 nm from the measurements of X-ray diffraction and AFM（Atomic-Force-Microscope）. Electrochemical characteristics of ITO/ TiO2 electrode under UV（ultraviolet）irradiation were investigated using the method of cyclic voltammetry. A new oxidative peak was observed at 0.035 V when the TiO2 electrode was irradiated by 253.7 nm UV light for a certain time. The peak current increased with the irradiation time. It was assumed that the new oxidative peak resulted from Ti3+,which was formed during the UV illumination. The changes of hydrophilicity of the TiO2 thin film on ITO under UV light were also observed. It was assumed that the changes of hydrophilicity of the films may be related with the formation of Ti3+ on the surface when the film was irradiated by UV light.     

Synthesis of Nanocrystalline Materials Based on the Bi2O3-TiO2 System

Russian Journal of General Chemistry - Nanocrystalline bismuth titanates Bi2Ti4O11 (115±5 nm), Bi4Ti3O12 (60±5 nm), Bi2Ti2O7 (105±5 nm), Bi8TiO14 (82±5 nm), and Bi12TiO20...     

纤维状TiO2／Bi2O3光催化剂的制备及其光催化性能

研究了SrCo0．7Fe0．2Mo0．103-δ（SCFM）材料的相组成、微观结构、热膨胀系数、氧渗透性能和化学稳定性,其结果和文献中的SrCo0．8Fe0.2O3-δ（SCF）做了对比．通过EDTA-citric混合方法成功获得了纯相SCFM材料．SCFM材料在500-1050℃显示出比SCF材料更低的热膨胀系数（24×10^-6-29×10^-6／K）,表明其具有一种更稳定的结构,尽管由于Mo掺杂造成其透氧率比SCF材料低,但是SCFM的透氧率仍然维持在一个较高水平．证实SCF中的Mo掺杂能够阻止晶格中的有序-无序转变,提高了其在CO2下的化学稳定性．