Contra-directional coupling between two-dimensional photonic crystal waveguides

The contra-directional coupling between two photonic crystal (PC) waveguides is studied, using the finite-difference time-domain (FDTD) method. A design of contra-directional coupler is presented and its transmission properties are investigated. The device can be used as an add/drop filter. It is also shown that the coupled mode theory is suitable to study the photonic crystal waveguide coupler.     

Faraday rotation in a two-dimensional photonic crystal with a magneto-optic defect

We study the magneto-optic (MO) Faraday rotation in a two-dimensional square-lattice photonic crystal with a central MO defect layer in the optical wavelength range. We show that when a TM plane wave is incident upon a photonic crystal, an enhancement of Faraday rotation takes place in a region where a resonance peak appears in the photonic bandgap. In this region the mode conversion is high.     

Deformable two-dimensional photonic crystal slab for cavity optomechanics

We have designed photonic crystal suspended membranes with optimized optical and mechanical properties for cavity optomechanics. Such resonators sustain vibration modes in the megahertz range with quality factors of a few thousand. Thanks to a two-dimensional square lattice of holes, their reflectivity at normal incidence at 1064?nm reaches values as high as 95%. These two features, combined with the very low mass of the membrane, open the way to the use of such periodic structures as deformable end mirrors in Fabry-Perot cavities for the investigation of cavity optomechanical effects.     

High quality factor in a two-dimensional photonic crystal cavity on silicon-on-insulator

We propose a design for high quality factor two-dimensional (2D) photonic crystal cavities on silicon-on-insulator (SOI). A quality factor of up to 1.2×10(7) with a modal volume of 2.35(λ/n)(3) is simulated. A very high quality factor of 200,000 is experimentally demonstrated for a 2D cavity fabricated on SOI.     

Temperature tunability of cavity-semiconducting waveguide coupling in a two-dimensional photonic crystal

We study the coupling efficiency between a cavity resonator and semiconducting waveguide in a two-dimensional photonic crystal by varying the temperature. We used the revised plane wave expansion and finite difference time domain methods to evaluate the coupling efficiency. The photonic crystal waveguide is composed of a row of InSb semiconducting materials, and the efficiency was calculated at various temperatures. The findings indicate that the temperature can be used as a useful efficiency controller.     

光控液晶光子晶体微腔全光开关

设计了一种缺陷模迁移光子晶体微腔全光开关. 两条二维三角晶格空气孔光子晶体波导由一个光子晶体微腔连接, 在微腔的点缺陷中填充掺有少量偶氮聚合物的苯乙炔类液晶. 通过调节控制光的偏振态, 使偶氮聚合物发生顺-反异构化反应, 带动液晶分子重新取向, 从而改变光子晶体微腔的谐振波长, 进而实现光的通过与截止. 运用时域有限差分法和平面波展开法分析 了二维光控液晶光子晶体微腔全光开关的光学特性. 数值计算结果表明: 对于1.55 μ通信波段通过外界偏振光控制所填充的向列相液晶 的折射率可以实现对光波的导通与截止. 分析结果显示, 此开关具有阈值低, 消光比较大, 体积小等优点. 关键词： 二维光子晶体微腔 波导 时域有限差分(FDTD) 液晶     

High efficiency filtering using two-dimensional photonic crystal coupled cavity structures

Transmission spectra of coupled cavity structures (CCSs) in two-dimensional (2D) photonic crystals (PCs) are investigated using a coupled mode theory, and an optical filter based on CCS is proposed. The performance of the filter is investigated using finite-difference time-domain (FDTD) method, and the results show that within a very short coupling distance of about 3λ, where λ is the wavelength of signal in vacuum, the incident signals with different frequencies are separated into different channels with a contrast ratio of 20 dB. The advantages of this kind of filter are small size and easily tunable operation frequencies.     

带有KTP缺陷的2维光子晶体设计与能带特性

设计了一种通过改变缺陷介质折射率实现能带特性改变的可调谐2维光子晶体激光器微腔,在光子晶体中引入点缺陷磷酸氧钛钾(KTP),在KTP两端施加交流电场控制KTP晶体折射率变化。实验过程中观察到了正方排列的光子晶体随着KTP 晶体折射率逐渐增大,晶体禁带数量减少,且向归一化频率小的方向移动,禁带宽度基本不变;而三角排列的晶格能带随着KTP折射率增大,禁带逐渐变窄,且有向低频方向移动的趋势。用平面波展开法分析了晶体的能带结构,得到理上的描述。     

点缺陷二维光子晶体波导的出射光集束

光子晶体器件在高密度集成光通信中有广泛的应用,为解决光子晶体波导出射光场的空间控制,采用时域有限差分法分析光子晶体波导结构的缺陷传播特性,提出基于点缺陷优化波导结构,通过在波导出射口两侧加上点缺陷,出射光方向性有显著提高,实现三点光源干涉系统的光集束。模拟结果表明缺陷态越靠近能带结构中央,共振腔的耦合效率越高;相反,缺陷态越靠近能带结构边缘位置,则共振腔耦合效率越低,因此,选取禁带区域四分之一处对应的点缺陷,可以有效实现波导出射的光集束。     

带有KTP缺陷的2维光子晶体设计与能带特性

 设计了一种通过改变缺陷介质折射率实现能带特性改变的可调谐2维光子晶体激光器微腔,在光子晶体中引入点缺陷磷酸氧钛钾(KTP),在KTP两端施加交流电场控制KTP晶体折射率变化。实验过程中观察到了正方排列的光子晶体随着KTP 晶体折射率逐渐增大,晶体禁带数量减少,且向归一化频率小的方向移动,禁带宽度基本不变;而三角排列的晶格能带随着KTP折射率增大,禁带逐渐变窄,且有向低频方向移动的趋势。用平面波展开法分析了晶体的能带结构,得到理上的描述。     

点缺陷二维光子晶体波导的出射光集束

光子晶体器件在高密度集成光通信中有广泛的应用,为解决光子晶体波导出射光场的空间控制,采用时域有限差分法分析光子晶体波导结构的缺陷传播特性,提出基于点缺陷优化波导结构,通过在波导出射口两侧加上点缺陷,出射光方向性有显著提高,实现三点光源干涉系统的光集束。模拟结果表明缺陷态越靠近能带结构中央,共振腔的耦合效率越高;相反,缺陷态越靠近能带结构边缘位置,则共振腔耦合效率越低,因此,选取禁带区域四分之一处对应的点缺陷,可以有效实现波导出射的光集束。     

Amphoteric-like refraction in a two-dimensional photonic crystal

High-index contrast photonic crystals possess an intricate photonic band structure that is responsible for surprising phenomena as the surperprism effect, self-collimation, power splitting or negative refraction. Recently, it was reported that at the interface between an isotropic medium and a uniaxial crystal (or between two uniaxial crystals) a phenomenon known as amphoteric refraction, that is, positive as well as negative refraction, can take place. By means of a equifrequency contours analysis and finite-difference time-domain simulations, we show that a two dimensional photonic crystal can also present amphoteric refraction by properly choosing the lattice orientation and the termination. However, total transmission is difficult to achieve because a Bloch mode is excited inside the photonic crystal and the coupling efficiency from this mode to an external plane wave is lower than one.     

Optimized light-matter interaction and defect hole placement in photonic crystal cavity sensors

Photonic crystal slab cavities were investigated for increased light-matter interaction based on selective placement of sublattice hole sized defect holes inside L3 cavities. A multiple-hole defect (MHD) consisting of three defect holes placed in the regions of highest cavity mode field intensity were demonstrated through finite-difference time-domain simulations and experiments to exhibit the strongest light-matter interaction without introducing significant scattering losses. Compared to an L3 cavity without defect holes, these strategically designed three-hole MHD cavities presented higher quality factor and more than double the resonance wavelength shift upon exposure to a thin oxide and two small chemical molecules.     

Optical transmission properties of an anisotropic defect cavity in one-dimensional photonic crystal

We investigate theoretically the possibility to control the optical transmission in the visible and infrared regions by a defective one dimensional photonic crystal formed by a combination of a finite isotropic superlattice and an anisotropic defect layer. The Green's function approach has been used to derive the reflection and the transmission coefficients, as well as the densities of states of the optical modes. We evaluate the delay times of the localized modes and we compare their behavior with the total densities of states. We show that the birefringence of an anisotropic defect layer has a significant impact on the behavior of the optical modes in the electromagnetic forbidden bands of the structure. The amplitudes of the defect modes in the transmission and the delay time spectrum, depend strongly on the position of the cavity layer within the photonic crystal. The anisotropic defect layer induces transmission zeros in one of the two components of the transmission as a consequence of a destructive interference of the two polarized waves within this layer, giving rise to negative delay times for some wavelengths in the visible and infrared light ranges. This property is a typical characteristic of the anisotropic photonic layer and is without analogue in their counterpart isotropic defect layers. This structure offers several possibilities for controlling the frequencies, transmitted intensities and the delay times of the optical modes in the visible and infrared regions. It can be a good candidate for realizing high-precision optical filters.     

带缺陷二维光子晶体的透射谱研究

在一维线缺陷的研究基础上进一步应用转移矩阵方法数值研究带其它缺陷的二维正方晶格圆柱光子晶体的透射谱,缺陷的引入使得原来不透电磁波的禁带中,出现了缺陷模,即某一波长的电磁波可以透过,计算结果表明禁带位置、宽度,缺陷模的位置与透过率随着缺陷的种类、介质、程度有关,特别是都受到波源的入射角调制.     

Polaritonic and photonic gap interactions in a two-dimensional photonic crystal

If an ionic material is used in a photonic crystal, the lattice resonance creates a polaritonic gap in the infrared range. The interaction between a polaritonic gap and the structure gap in a 2D square photonic crystal is studied by transfer matrix photonic band structure calculations. The polaritonic gap appears for a surprisingly low volume density of the ionic material. The TM gaps are larger than the TE gaps, as in the dielectric case. By varying the lattice constant, the structure gaps can be shifted across the polaritonic gap, and the effects of merging the two gaps can be studied.     

Low threshold laser cavities of two-dimensional photonic crystal line defect mode

Two-dimensional (2D) rod-type photonic crystal (PC) line defect waveguide (LDW) laser cavities based on three types of line defect modes with zero group velocity are studied by using finite-difference time-domain (FDTD) method. These laser cavities have high quality (Q) factor, better localization of light, non-uniform gain distribution and small overlap between gain medium and light field. Therefore, they have the advantages over conventional and air-bridge PC cavities with uniform gain, such as low threshold, single mode lasing and effectively avoiding thermal effect. From their comparison, one can find the mode at middle Brillouin zones (BZ) is the best one to be used as lasing mode. Its dynamic lasing process and lasing features are demonstrated by the numerical experiment where the FDTD method coupling Maxwell's equations with the rate equations of electronic population is used.     

光子晶体平面波导与脊波导高效耦合技术的研究

利用一维变周期谐振腔阵列和非线性缓变边界，可以实现光波从脊波导到光子晶体平面波导 （PCW）的高效耦合.基于平面波展开法（PWE）和时域有限差分法（FDTD），深入分析和讨 论了普通脊波导、2D-PCW结构和本征模以及工作模式、缓变边界形状等对耦合效率的影响， 从而得出光波从脊波导到2D-PCW、再返回脊波导的统一图景.指出考虑模式转换和采用缓变 边界条件可以极大提高PCW与脊波导间的耦合效率.对PC-PW边界采用线性和非线性缓变结构 进行了仿真，讨论了边界缓变程度对耦合效率的影响.结果表明，采用模式耦合和PC-PW余弦 缓变边界时的耦合效率在较宽的带宽内超过了95%. 关键词： 光子晶体波导 脊波导 PWE FDTD 耦合边界     

MODELLING of a two-dimensional photonic crystal with line defect for a laser gas sensor application

We present the results of a numerical analysis of a two-dimensional photonic crystal with line defect for a laser gas sensor working in a slow light regime. The geometrical parameters of photonic crystals with three different line defects were numerically analyzed: a missing row of holes, a row of holes with changed diameter and air channel. Antireflection sections were also analyzed. The simulations were carried out by MEEP and MPB programs, with the aim to get the values of a group refractive index, transmission and a light-gas overlap as high as possible. The effective refractive index method was used to reduce the simulation time and required computing power. We also described numerical simulation details such as required conditions to work in the slow light regime and the analyzed parameters values’ dependency of the simulation resolution that may influence the accuracy of the results.     

Modal selective tuning in a photonic crystal cavity

We present a way to selectively tune the properties of the degenerated modes confined in a single point defect two-dimensional photonic crystal cavity based on a triangular lattice of air holes. We investigate the dependence of the modal properties of the resonator on the position of the first neighbor holes, showing that it is possible to finely tune the resonant frequency of only one of these two modes and to increase the quality factor of the mode that has no frequency shift. This is achieved by controlling the wavevector components inside the cavity. This approach is a viable strategy for the development and the optimization of several innovative devices based on bi-modal cavity arrays, such as arrays of integrated optical filters and optical read-out sections for biosensing applications.