Plasma channel formation in nitrogen upon electron beam injection

A theoretical study is performed of plasma channel formation and current neutralization upon injection of a high current electron beam into nitrogen under high pressure (p 70 torr). The complex ion formation and recombination mechanism is considered together with its effect on the parameters of the plasma formed and the dynamics of beam current neutralization. Analytical expressions are obtained for the densities of simple and complex ions in the limiting cases and numerical calculations are carried out by computer for a more general case. It is shown that in nitrogen at a pressure of 70 torr when complex ions are considered the plasma channel conductivity decreases by approximately 35–40%.Translated from Izvestiya Vysshikh Uchebnykh Zavedenii, Fizika, No. 12, pp. 59–65, December, 1990.     

Superfluidlike motion of an absorbing body in a collisional plasma

Motion of a small charged absorbing body (micrograin) immersed in a stationary weakly ionized high pressure plasma environment is considered. It is shown that the total frictional (drag) force acting on the grain can be directed along its motion, causing the grain acceleration. At some velocity, the forces associated with different plasma components can balance each other, allowing free undamped superfluid motion of the grain. The conditions when such behavior can be realized and the possibility of a superconductive grain current are discussed in the context of complex (dusty) plasmas.     

Modeling pressure-ionization of hydrogen in the context of astrophysics

Abstract

The recent development of techniques for laser-driven shock compression of hydrogen has opened the door to the experimental determination of its behavior under conditions characteristic of stellar and planetary interiors. The new data probe the equation of state (EOS) of dense hydrogen in the complex regime of pressure ionization. The structure and evolution of dense astrophysical bodies depend on whether the pressure ionization of hydrogen occurs continuously or through a “plasma phase transition” (PPT) between a molecular state and a plasma state. For the first time, the new experiments constrain predictions for the PPT. We show here that the EOS model developed by Saumon and Chabrier can successfully account for the data, and we propose an experiment that should provide a definitive test of the predicted PPT of hydrogen. The usefulness of the chemical picture for computing astrophysical EOS and in modeling pressure ionization is discussed.     

Effects of gas pressure on plasma characteristics in dual frequency argon capacitive glow discharges at low pressure by a self-consistent fluid model

A self-consistent fluid model for dual radio frequency argon capacitive glow discharges at low pressure is established.Numerical results are obtained by using a finite difference method to solve the model numerically, and the results are analyzed to study the effect of gas pressure on the plasma characteristics. It shows that when the gas pressure increases from 0.3 Torr(1 Torr = 1.33322×10~2 Pa) to 1.5 Torr, the cycle-averaged plasma density and the ionization rate increase;the cycle-averaged ion current densities and ion energy densities on the electrodes electrode increase; the cycle-averaged electron temperature decreases. Also, the instantaneous electron density in the powered sheath region is presented and discussed. The cycle-averaged electric field has a complex behavior with the increasing of gas pressure, and its changes take place mainly in the two sheath regions. The cycle-averaged electron pressure heating, electron ohmic heating, electron heating, and electron energy loss are all influenced by the gas pressure. Two peaks of the electron heating appear in the sheath regions and the two peaks become larger and move to electrodes as the gas pressure increases.     

小波变换在HT-7 Tokamak磁流体动力学振荡动态频谱分析中的应用

将Gauss复小波变换方法成功地应用于HT-7Tokamak磁流体动力学振荡动态频谱分析中.研究结果表明,这种方法具有较好的时间分辨率和空间分辨率,比较适用做动态频谱分析.对典型放电数据的分析结果表明, m=1模的振荡频率与等离子体压强梯度有着密切的关系.     

Highly resolved self-excited density waves in a complex plasma

Experimental results on self-excited density waves in a complex plasma are presented. An argon plasma is produced in a capacitively coupled rf discharge at a low power and gas pressure. A cloud of microparticles is subjected to effective gravity in the range of 1-4 g by thermophoresis. The cloud is stretched horizontally (width/height approximately 45 mm/8 mm). The critical pressure for the onset of the waves increases with the temperature gradient. The waves are propagating in the direction of the ion drift. The wave frequency, phase velocity, and wavelength are measured, and particle migrations affected by the waves are analyzed at a time scale of 1 ms/frame and a subpixel space resolution.     

利用质子能损检测气体靶区有效靶原子密度的实验研究

准确测量气态靶区的有效靶原子密度能够提升离子与气体和离子与等离子体靶相互作用实验结果的精度和对物理过程的认识.实验中利用离子加速器引出的100 ke V质子束穿过一定长度的氢气靶,对质子的剩余能量进行了精确测量,获得了在气体靶内的质子能损数据,结合已有的能损研究结果,重新标定了气体靶区内的有效靶原子密度.分别比较了能损、电离型真空计IonIVac ITR 90和薄膜电容型真空计Varian CDG-500的实验测量结果,对比了修正后的电离型真空计有效气压曲线,结果发现质子束能损的测量方式具有原位、高准确性、在线监测等突出优势,为诊断气态靶有效原子密度提供了新的方法.     

微波电子回旋共振等离子体阴极电子束的实验研究

介绍了实验室研制的微波电子回旋共振(ECR)等离子体阴极电子束系统及初步研究结果，该系统包括微波ECR 等离子体源、电子束引出极、聚焦线圈等。通过测量水冷靶电流和靶上的束斑尺寸，实验研究了微波ECR 等离子体阴极电子束的流强、聚束性能等随电子束系统工作条件的变化。结果表明：微波输入功率越高、引出电压越高，引出电子束流强越大；工作气压对电子束流强的影响较复杂，随气压增加呈现出先降低后升高的特点；在7×10⁻⁴Pa 的极低气压下电子束流强可达75mA，引出电压9kV；能量利用率可达0.6；调整聚焦线圈的驱动电流，电子束的束斑直径从20mm 减小到13mm，电子束流强未有明显变化。     

冷等离子体强化制备金属催化剂研究进展

冷等离子体属于非热平衡等离子体,具有较高的电子能量和较低的气体温度,是一种制备金属催化剂的绿色新方法.等离子体强化制备金属催化剂包含复杂的物理和化学多相反应.一方面,等离子体提供的高活性环境不但可以加速化学反应,使反应时间从数小时缩短至数分钟,还可以使热力学或者动力学上不可行的反应发生,实现非常规制备;另一方面,等离子体强化制备过程中,在介观尺度上等离子体对相接触行为的影响,可使获得的金属催化剂结构区别于传统方法制备的催化剂.本综述总结了冷等离子体制备金属催化剂的反应器结构、物理化学机理、获得金属催化剂的结构特性、制备面临的挑战,并对未来发展进行了展望.重点阐述了冷等离子体反应器、制备机制及其对金属催化剂结构和性能的影响.     

΢�����ӻ��������������������������ʵ���о�

The generation and control of microwave electron cyclotron resonance (ECR) plasma cathode electron beam is studied experimentally. A complete set of discharge, electron beam extraction, focusing and measuring system was set up. The characteristics and performance of microwave ECR plasmas as electron beam extraction source were studied by measuring the current of water cooling target and the beam spot size on the target. Experimental results indicated that both microwave input power and accelerating voltage are conducive to improving electron beam current. The influence of gas pressure on the electron beam current was complex. With the increase of gas pressure, the electron beam current is characterized by decreasing first and then increasing. The extracted electron current of microwave ECR plasma cathode can reach 75mA at gas pressure of 7×10⁻⁴Pa, and the energy of the electron beam can reach 9keV. The energy utilization can reach 0.6. By adjusting the current of the focusing coil, the diameter of electron beam spot is reduced from 20mm to 13mm and the electron beam current keeps the value unchanged.     

A Calculation of the Electron Temperature of Complex Plasma of Noble Gases Mixture in CCRF Discharge

In this paper the results of studying of the electron temperature of buffer and complex plasmas in mixtures of noble gases (helium + argon) in capacitively coupled radiofrequency (CCRF) discharge are presented. The optical properties of dusty plasma in argon, helium and their mixtures have been studied using optical diagnostic methods. Based on spectral lines of plasma forming gases, the dependence of the electron temperature on gas pressure and discharge power has been determined. The axial distribution of electron temperature in the interelectrode gap has been measured. Measurements have been made using an RF compensated electric probe. The comparison of the experimental results shows that admixture of a small amount of argon to helium leads to a decrease in the electron temperature of buffer plasma. The presence of dust particles in the plasma causes an increase in the electron temperature. (© 2015 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

环境气氛对高能量激光诱导等离子体辐射特性的影响

采用高能量钕玻璃激光器(～25 J)激发诱导金属等离子体,研究了环境气体及其压力对等离子体辐射特性的影响。实验结果表明,相同压强下,氩气中等离子体的谱线强度明显高于空气中等离子体的谱线强度;0.8×105Pa氩气条件下,光谱标钢等离子体的谱线强度达到了最大值;随着环境气压的增大,谱线自吸明显增强,当环境气压达到(0.8～0.93)×105Pa时,标样铝的AlⅠ308.22 nm和AlⅠ309.27 nm两条谱线产生了严重自蚀;另外,等离子体的激发温度也随环境气压的增大而增大,0.93×105Pa氩气条件下标钢等离子体的激发温度相对于0.43×105Pa时升高了近1 500 K。     

Estimation of the Fulfillment of the Local Thermodynamic Equilibrium Criterion for the Plasma Generated by Laser Pulses of Various Shapes at the Surface of a Solid Target

The results of experimental estimation of the fulfillment of the local thermodynamic equilibrium (LTE) criterion for the plasma generated by laser pulses of various duration at the surface of a solid target placed in a gaseous atmosphere at standard pressure are given in the present paper. The fulfillment of all the LTE criteria is demonstrated for an ensemble of neutral atoms contained in the plasma generated by a giant laser pulse or by a laser pulse whose complex shape represents several giant pulses against the background of free-running laser oscillations. The plasma excited by the radiation of a Nd : YAG laser with energy 0.4 J per pulse is examined. We have recorded a resonance broadening of atomic Al and Mg lines. This has allowed us to estimate the density of neutral atoms contained in a plasma plume.     

光谱法研究一种具有渐变折射率的新型等离子体光子晶体

在双水电极介质阻挡放电装置中,在氩气和空气的混合气体放电过程中通过改变气体压强可以得到一种新型等离子体光子晶体。该光子晶体具有四边形的复杂对称结构,包括晶胞中心处的细等离子体柱、四周的等离子体片、等离子体片交叉点产生的等离子体柱和边缘处的粗等离子柱。运用发射光谱法研究了该等离子体光子晶体不同位置处的等离子体状态,通过测量氩原子696.54 nm(2P2→1S5)发射谱线的展宽对比了电子密度,通过氮分子第二正带系(C3Πu→B3Πg)发射谱线计算了分子振动温度。实验结果证实,不但晶胞中心处的细等离子体柱、四周的等离子体片、等离子体片交叉点产生的等离子体柱和边缘处的粗等离子柱具有不同的等离子体状态,不同位置处的晶胞中心细等离子体柱也具有不同的等离子体状态。电子密度由大到小排列依次为:4个角上的细等离子体柱(A)、靠近4个边的细等离子体柱(B)、靠近中心的细等离子体柱(C)、边缘处的粗等离子体柱(D)、等离子体片交叉点产生的等离子体柱(E)、四周的等离子体片(F)。分子振动温度的变化规律与电子密度相反。由于该晶体结构中A、B、C 3处的折射率均不相同,由内向外呈周期性渐变排列,它们和其他位置处不同的等离子体状态构成了具有渐变折射率的等离子体光子晶体。     

高密度等离子体融断开关融蚀现象的粒子模拟研究

利用自行研制的2.5维全电磁柱坐标粒子模拟程序对高密度等离子体融断开关融断区域中的融蚀现象进行了模拟研究,详细地介绍了计算模型的建立以及复杂边界的算法处理。模拟结果表明在融断开关导通电流的最后阶段,由于磁压力、磁场渗透作用和非中性静电融蚀作用,在融断区域的阴极附近会形成一定宽度的真空鞘层。由于等离子体密度的下降以及初始真空鞘层的存在,使得即使只有较小的离子电流,融蚀机制也完全可以导致PEOS最终断开。     

Microwave Plasmas at Atmospheric Pressure

Microwave plasmas at atmospheric pressure are used for surface treatments like for example cleaning, sterilization or decontamination purposes, for a pre‐treatment to increase the adhesion of lacquer, paint, or glue, and for the deposition of different kind of layers and coatings. Micro plasma jets can also be applied for biomedical applications and for treatment of small and complex geometries like for example the inside of capillaries. Larger plasma torches which exhibit higher gas temperatures can also be used for chemical syntheses like waste gas decomposition, methane pyrolysis, or carbon dioxide dissociation and for plasma spraying purposes. In the present publication an overview on the development and the investigation of the operating principle of two atmospheric pressure microwave plasma torches at frequencies of 2.45 GHz and 915 MHz will be presented. The plasma sources are based on a cylindrical resonator combined with coaxial structures. To explain how these plasma sources work, simulations of the electric field distribution will be discussed. Furthermore, some physical characteristics of an air and an Ar/H2 atmospheric plasma like gas temperatures, excitation temperatures and densities as well as the heating of the plasma by the microwave will be investigated. (© 2014 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

Measurement of neutral gas temperature in inductively coupled plasmas

Dependence of the neutral gas temperature on the gas pressure and discharge power in an inductively coupled plasma source has been investigated using optical emission spectroscopy. Both nitrogen and argon plasmas have been studied separately. In the case of argon plasma, about 5% nitrogen was added to the total gas flow as an actinometer. The maximum temperature was found to be as high as 1850 K at 1 Torr working pressure and 600 W radiofrequency power. The temperature increases almost linearly with the logarithm of the gas pressure, but changes only slightly with the discharge power in the range of 100–600 W. In a nitrogen plasma, a sudden increase in the neutral gas temperature occurs when the gas pressure is increased at a given discharge power. This suggests a discharge-mode transition from the H-mode (high plasma density) to the E-mode (low plasma density). In the H-mode, the gas temperature is proportional to the logarithm of the gas pressure, as in the argon plasma. However, the gas temperature increases almost linearly with the discharge power, which is in contrast to the case of argon plasma. The electron density in the nitrogen plasma is about 10% of that in the argon plasma. This may explain the observation that the nitrogen neutral temperature is always lower than the argon neutral temperature under the same discharge power and gas pressure.     

60MHz电容耦合等离子体中电子能量分布函数特性研究

甚高频(频率大于30 MHz)耦合放电源由于能产生大面积高密度的等离子体而受到了人们的广泛关注. 采用电流、电压探针以及朗缪尔探针诊断技术对60MHz射频激发产生的容性耦合等离子体的放电特性及电子行为进行了研究. 实验结果表明,等离子体的等效电阻/电容随着射频输入功率的增加而减小/增加;等离子体中电子行为不仅依赖于射频输入功率,还与放电气压密切相关;放电气压的增加导致电子能量概率分布函数(EEPF)从双温Maxwellian分布向Druyvesteyn分布转变,而且转变气压远低于文献所报道的数值,这主要是由于在60MHz容性耦合等离子体中电子反弹共振加热效率大为降低. 关键词： 甚高频容性耦合等离子体 朗缪尔探针诊断 电子加热模式     

Investigations on the effect of process parameters on the growth of vertically oriented graphene sheet in plasma-enhanced chemical vapour deposition system

A multistage numerical model comprising the plasma kinetics and surface deposition sub-models is developed to study the influence of process parameters, namely, total gas pressure and input plasma power on the plasma chemistry and growth characteristics of vertically oriented graphene sheets (VOGS) grown in the plasma-enhanced chemical vapour deposition system containing the Ar + H₂ + C₂H₂ reactive gas mixture. The spectral and spatial distributions of temperature and number densities, respectively, of plasma species, that is, charged and neutral species in the plasma reactor, are examined using inductively coupled plasma module of COMSOL Multiphysics 5.2 modelling suite. The numerical data from the computational plasma model are fed as the input parameters for the surface deposition model, and from the simulation results, it is found that there is a significant drop in the densities of various plasma species as one goes from the bulk plasma region to the substrate surface. The significant loss of the energetic electrons is observed in the plasma region at high pressure (for constant input power) and low input power (for constant gas pressure). At low pressure, the carbon species generate at higher rates on the catalyst nanoislands surface, thus enhancing the growth and surface density of VOGS. However, it is found that VOGS growth rate increases when input plasma power is raised from 100 to 300 W and decreases with further increase in the plasma power. A good comparison of the model outcomes with the available experimental results confirms the adequacy of the present model.     

A model of Jupiter’s magnetodisk

An axially symmetric equilibrium model of Jupiter’s magnetodisk is developed in the MHD approximation that takes the plasma corotation and the centrifugal force into account. The model is constructed for two cases: (1) the magnetodisk plasma is assumed to have a uniform temperature; (2) the plasma pressure is assumed to be an adiabatic function of density. Analytical expressions for the magnetic field, current density, and magnetodisk temperature and thickness distributions are obtained as functions of the system parameters, viz., the radial distribution of plasma pressure in the equatorial plane, the transverse magnetic field in the center of the layer, and the angular velocity of the plasma rotation.