Kinetic Determination of Nanogram Levels of Manganese(II) by Naphthol Blue Black–Potassium Periodate–1,10-Phenanthroline System

 The catalytic effect of manganese(II) on the oxidation of Naphthol Blue Black, with potassium periodate in the presence of 1,10-phenanthroline in weakly acidic media is studied. The reaction is followed spectrophotometrically by measuring the decrease in the absorbance of the dye at 618 nm. Under the optimum conditions (3 × 10⁻⁵ mol dm⁻³ Naphthol Blue Black, 6 × 10⁻⁴ mol dm⁻³ potassium periodate, 1 × 10⁻⁴ mol dm⁻³ 1,10-phenanthroline, 0.1 mol dm⁻³ acetate buffer – pH 4.0, 60 °C, 5 min) manganese(II) in the range 0.08–4 ng cm⁻³ can be determined by the fixed-time method with a detection limit of 0.025 ng cm⁻³. The influence of foreign ions on the accuracy of the results is investigated. The developed method is highly sensitive, selective, and simple. The method was applied successfully to the determination of manganese in cucumbers, garlic cloves and parsley leaves. Received June 12, 2000. Revision December 12, 2000.     

Cathodic Adsorptive Stripping Voltammetry for Estimation of the Forest Area Pollution with Nickel and Cobalt

 Necessary conditions were established for simultaneous nickel and cobalt determination in environmental samples, such as oak wood and soil, based on cathodic adsorptive stripping voltammetry. Ni(II) and Co(II), complexed with dimethylglyoxime, were determined using a hanging mercury drop electrode. Optimum conditions were found to be: accumulation time 90 s, accumulation potential −0.80 V vs. SCE, supporting electrolyte 0.2 mol dm⁻³ ammonia-ammonium chloride buffer (pH = 9.4) + 0.05 mol dm⁻³ NaNO₂ and dimethylglyoxime 2 × 10⁻⁴ mol dm⁻³. A linear current-concentration relationship was observed up to 7.51×10 ⁻⁷ mol dm⁻³ for Ni(II) and 7.0 × 10⁻⁷ mol dm⁻³ for Co(II). Excess amounts of zinc(II) interfering with cobalt peaks were masked by complexation with EDTA. Wood and soils were mineralized by applying a microwave digestion system, using the mixtures H₂O₂ + HNO₃ or HNO₃ + HF, respectively. The developed procedure was tested by analysing international reference materials (BCR 62 Olive Leaves and GBW 08302 Tibet Soil). The developed procedure was used to determine pollution of oak stand with nickel and cobalt in different regions of Poland. Received August 10, 2000. Revision May 22, 2001.     

Dissolution behavior of anodic oxide films formed in sulfanic acid on aluminum

Chemical dissolution of the barrier layer of porous oxide films formed on an aluminum foil (99.5% purity) in 1.5 M sulfanic acid after immersion in a 2 mol dm⁻³ sulphuric acid at 50 °C was studied. The barrier layer thickness before and after dissolution was determined using a re-anodizing technique. Re-anodizing was conducted in 0.5 mol dm⁻³ H³BO³/0.05 mol dm⁻³ Na²B⁴O⁷ solution. We found that the change in the porous oxide growth mechanism was observed at the anodizing voltage of 30 V. Taking into account this result chemical dissolution behaviour of the barrier layer of porous films formed at 20 V and 36 V and also the influence of annealing of oxide films at 200 °C were studied. We showed the interplay between the dissolution rates and charge distribution across the barrier layer. We conclude that the outer and middle layers have negative space charges and the inner layer has positive space charges.     

On Water Structure in Concentrated Salt Solutions

In concentrated salt solutions the average distances between the ions, d ^av=1.1844⋅(∑ν _i c _i )^−1/3 nm, are commensurate with the sizes of the solvated ions, so that no ‘bulk solvent’ remains. This is illustrated with two saturated aqueous solutions, where 16.67 mol⋅dm⁻³ CsF at 75 °C has d ^av(Cs–F)=0.368 nm and 14.54 mol⋅dm⁻³ LiI at 80 °C has d ^av(Li–I)=0.385 nm. The minimal distance required for the bare ions (sum of their radii) are 0.303 nm for CsF and 0.289 nm for LiI. Hence no water molecule, diameter 0.276 nm, can be fitted between the ions to form linear or slightly bent hydrogen bonds. Some recent work ignoring such constraints, even in 3–6 mol⋅dm⁻³ solutions, is criticized on this account.     

Low-concentration aqueous solutions of undecenoic acid and sodium undecenoate

The behaviors of low-concentration aqueous solutions of 10-undecenoic acid and its sodium salt were studied by several techniques. The acid does not have a critical micelle concentration, but gives an emulsion of very small droplets at (0.8–1) ×  10⁻⁴ mol dm⁻³. The emulsion was clearly visible by eye at 0.002 mol dm⁻³. The sodium salt has a stepwise aggregation process, giving premicellar aggregates at 0.023 ± 0.008 mol dm⁻³, which grow to form micelles at 0.117 ± 0.007 mol dm⁻³. The compositions of the solution and the micelles were also studied. Received: 25 February 1999 Accepted in revised form: 21 June 1999     

Preparation and electrochemical performance of nano-structured Li<Subscript>2</Subscript>Mn<Subscript>4</Subscript>O<Subscript>9</Subscript> for supercapacitor

Nano-structured spinel Li₂Mn₄O₉ powder was prepared via a combustion method with hydrated lithium acetate (LiAc·2H₂O), manganese acetate (MnAc₂·4H₂O), and oxalic acid (C₂H₂O₄·2H₂O) as raw materials, followed by calcination of the precursor at 300 °C. The sample was characterized by X-ray diffraction, scanning electron microscope, and energy-dispersive X-ray spectroscopy techniques. Electrochemical performance of the nano-Li₂Mn₄O₉ material was studied using cyclic voltammetry, ac impedance, and galvanostatic charge/discharge methods in 2 mol L⁻¹ LiNO₃ aqueous electrolyte. The results indicated that the nano-Li₂Mn₄O₉ material exhibited excellent electrochemical performance in terms of specific capacity, cycle life, and charge/discharge stability, as evidenced by the charge/discharge results. For example, specific capacitance of the single Li₂Mn₄O₉ electrode reached 407 F g⁻¹ at the scan rates of 5 mV s⁻¹. The capacitor, which is composed of activated carbon negative electrode and Li₂Mn₄O₉ positive electrode, also exhibits an excellent cycling performance in potential range of 0–1.6 V and keeps over 98% of the maximum capacitance even after 4,000 cycles.     

Kinetics of oxidation of N,N-bis(salicylaldehyde-1,2-diaminoethane) cobalt(II) complex by periodate. Evidence for the inhibiting effect of copper(II)

A kinetic study of the oxidation of [Co(H₂L)(H₂O)₂]²⁺ (H₂L = N,N-bis (salicylaldehyde-1,2-diaminoethane) Schiff base) by periodate in aqueous solution was performed over pH (2.3–3.4) range, (0.1–0.5) mol dm⁻³ ionic strength and temperatures 20–35 °C for a range of periodate and complex concentrations. The reaction rate showed a first-order dependence on both reactants and increased with pH over the range studied. The effects of Cu(II) and Fe(II) on the reaction rate were investigated over the (1.0–9.0) × 10⁻⁵ mol dm⁻³ range. The reaction was inhibited as the concentration of Cu(II) increased, and it was independent on Fe(II) concentrations over the ranges studied. An inner-sphere mechanism is proposed for the oxidation pathways of both the protonated and deprotonated Co^II complex species.     

Equilibrium Study of the Mixed Complexes of Copper(II) with Adenine and Amino Acids in Aqueous Solution

Solution equilibria of the systems Cu(II)-adenine (A)-amino acids (L) have been studied pH-metrically. The formation constants of the resulting mixed ligand complexes have been calculated at 25 °C and ionic strength 0.1 mol⋅dm⁻³ NaNO₃. Ternary complexes are formed by simultaneous reactions. The relative stability of each ternary complex was compared with that of the corresponding binary complexes in terms of Δlog ₁₀ K values. The concentration distribution of the complexes in solution was evaluated.     

Electrocatalytic oxidation of nitrite at a terpyridine manganese(II) complex modified carbon past electrode

A carbon past electrode modified with [Mn(H₂O)(N₃)(NO₃)(pyterpy)], ( \textpyterpy = 4￠- ( 4 - \textpyridyl ) - 2,2￠:\text6￠,\text2￠￠- \textterpyridine ) \left( {{\text{pyterpy}} = 4\prime - \left( {4 - {\text{pyridyl}}} \right) - 2,2\prime:{\text{6}}\prime,{\text{2}}\prime\prime - {\text{terpyridine}}} \right) complex have been applied to the electrocatalytic oxidation of nitrite which reduced the overpotential by about 120 mV with obviously increasing the current response. Relative standard deviations for nitrite determination was less than 2.0%, and nitrite can be determined in the ranges of 5.00 × 10⁻⁶ to 1.55 × 10⁻² mol L⁻¹, with a detection limit of 8 × 10⁻⁷ mol L⁻¹. The treatment of the voltammetric data showed that it is a pure diffusion-controlled reaction, which involves one electron in the rate-determining step. The rate constant k′, transfer coefficient α for the catalytic reaction, and diffusion coefficient of nitrite in the solution, D, were found to be 1.4 × 10⁻², 0.56× 10⁻⁶, and 7.99 × 10⁻⁶ cm² s⁻¹, respectively. The mechanism for the interaction of nitrite with the Mn(II) complex modified carbon past electrode is proposed. This work provides a simple and easy approach to detection of nitrite ion. The modified electrode indicated reproducible behavior, anti-fouling properties, and stability during electrochemical experiments, making it particularly suitable for the analytical purposes.     

Manganese(III)-carboxylate binding: Chemistry and structure of a hydrated pyridinedicarboxylate

The reaction of Mn(CH₃COO)₃ 2H₂O with the carboxyl-rich ligand pyridine-2,6-dicarboxylic acid (H₂L) in methanol affords a high-spin (S = 2) hydratedbis-complex. Structure determination has revealed the solid to be [Mn^III(H₂ L)(L)] [Mn^IIIL₂] 5H₂ O: space group P−1;Z = 2;a = 7.527(3)?³,b= 14.260(4)?,c = 16.080(6)?,α = 91.08(3)°,β = 103.58(3)°,γ= 105.41(3)° andV= 1611.2(10)?³. Each ligand is planar and is bonded in the tridentate O₂N fashion. The MnO₄N₂ coordination spheres show large distortions from octahedral symmetry. The lattice is stabilised by an extensive network of O…O hydrogen-bonding involving water molecules and carboxyl functions. Upon dissolution in water, protic redistribution occurs and the complex acts as the mono-basic acid Mn(HL)(L) (pK, 4.3 ±0.05). The deprotonated complex displays high metal reduction potentials: Mn^IVL₂-Mn^IIIL ₂ ⁻ , 1.05V; Mn^IIIL ₂ ⁻ Mn^IIL ₂ ²⁻ -, 0.28V vs. SCE     

Electroreduction and Quantification of Furazolidone and Furaltadone in Different Media

 Adsorptive cathodic stripping voltammetry was used for the determination of furazolidone (FZ) and furaltadone (FD) in borax and phosphate buffers, respectively, using HMDE as working electrode. The influence of different factors upon the peak current response such as accumulation potential, scan rate, preconcentration time, pH and other variables was studied. Furazolidone and furaltadone showed an adsorption character on HMDE in presence of borax and phosphate buffers, respectively. A single cathodic peak at −0.36 V in borax (pH = 9.5) was observed for FZ, while FD gave a cathodic peak at −0.32 V in phosphate buffer (pH = 8.5). The calibration graph showed a linear behavior over the range 3×10⁻⁹–9×10⁻⁸ mol dm⁻³ for furazolidone. In the case of FD, concentrations from 3×10⁻⁹ to 2×10⁻⁷ mol dm⁻³ gave a linear relationship with the peak current. A detection limit of 2×10⁻⁹ mol dm⁻³ and 1×10⁻⁹ mol dm⁻³ was obtained for furazolidone and furaltadone, respectively. This method was applied to determine these drugs in pharmaceutical formulations, urine and serum samples. Received December 15, 1998. Revision February 4, 2000.     

Sensitive fluorescent probes for determination of hydrogen peroxide and glucose based on enzyme-immobilized magnetite/silica nanoparticles

Sensitive fluorescent probes for the determination of hydrogen peroxide and glucose were developed by immobilizing enzyme horseradish peroxidase (HRP) on Fe₃O₄/SiO₂ magnetic core–shell nanoparticles in the presence of glutaraldehyde. Besides its excellent catalytic activity, the immobilized enzyme could be easily and completely recovered by a magnetic separation, and the recovered HRP-immobilized Fe₃O₄/SiO₂ nanoparticles were able to be used repeatedly as catalysts without deactivation. The HRP-immobilized nanoparticles were able to activate hydrogen peroxide (H₂O₂), which oxidized non-fluorescent 3-(4-hydroxyphenyl)propionic acid to a fluorescent product with an emission maximum at 409 nm. Under optimized conditions, a linear calibration curve was obtained over the H₂O₂ concentrations ranging from 5.0 × 10⁻⁹ to 1.0 × 10⁻⁵ mol L⁻¹, with a detection limit of 2.1 × 10⁻⁹ mol L⁻¹. By simultaneously using glucose oxidase and HRP-immobilized Fe₃O₄/SiO₂ nanoparticles, a sensitive and selective analytical method for the glucose detection was established. The fluorescence intensity of the product responded well linearly to glucose concentration in the range from 5.0 × 10⁻⁸ to 5.0 × 10⁻⁵ mol L⁻¹ with a detection limit of 1.8 × 10⁻⁸ mol L⁻¹. The proposed method was successfully applied for the determination of glucose in human serum sample.     

The aggregation of sodium dehydrocholate in water

 We used a battery of different methods to study the association in aqueous sodium dehydrocholate (NaDHC) solutions. This salt associates by a stepwise mechanism. Below (9.6 ± 4.2) × 10⁻⁴ mol dm⁻³ there is a molecular solution with some strongly insoluble dehydrocholic acid produced by hydrolysis. Between (9.6 ± 4.2) × 10⁻⁴ and (5.2 ± 2.2) × 10⁻³ mol dm⁻³, an aggregate similar to acid soap (NaDHC.HDHC) appears and its amount and the aggregate's size increase with concentration. At =(2.20 ± 0.85) × 10⁻² mol dm⁻³ the aggregates formed have properties usually associated with true micelles, such as solubilisation of water-insoluble dyes. These aggregates increase in size with concentration and change their shape at 8 × 10⁻² mol dm⁻³, giving nonsymmetrical aggregates. The changes in the solution physicochemical properties at these concentrations may be misinterpreted and this explains the different values of the critical micelle concentration reported in the literature for substances with similar structure, such as bile salts. Received: 14 May 2001 Accepted: 10 August 2001     

Application of the catalytic properties of N-methylthiourea to the determination of In(III) at low levels by square wave voltammetry

Abstract  

This article proposes a simple and fast method of In(III) determination in the presence of Cd(II) and Pb(II). The catalytic activity of N-methylthiourea was used in the In(III) electroreduction, which also had a slight effect on the electroreduction process of Cd(II) and Pb(II). By applying square wave voltammetry it was possible to determine 3 × 10⁻⁷ mol dm⁻³ In(III) in the presence of 5 × 10⁻⁵ mol dm⁻³ Cd(II) and 1 × 10⁻⁴ mol dm⁻³ Pb(II) in 5 mol dm⁻³ NaClO₄ at pH 2. The calibration curve for In(III) was linear from 3 × 10⁻⁷ to 5 × 10⁻⁴ mol dm⁻³. The relative standard deviation for In(III) determination was about 3.0%.     

A new amperometric H<Subscript>2</Subscript>O<Subscript>2</Subscript> biosensor based on nanocomposite films of chitosan–MWNTs,hemoglobin, and silver nanoparticles

A new H₂O₂ biosensor was fabricated on the basis of nanocomposite films of hemoglobin (Hb), silver nanoparticles (AgNPs), and multiwalled carbon nanotubes (MWNTs)–chitosan (Chit) dispersed solution immobilized on glassy carbon electrode (GCE). The immobilized Hb displayed a pair of well-defined and reversible redox peaks with a formal potential (E ^θ′) of −22.5 mV in 0.1 M pH 7.0 phosphate buffer solution. The apparent heterogeneous electron transfer rate constants (k _s) in the Chit–MWNTs film was evaluated as 2.58 s⁻¹ according to Laviron’s equation. The surface concentration (Γ*) of the electroactive Hb in the Chit–MWNTs film was estimated to be (2.48 ± 0.25) × 10⁻⁹ mol cm⁻². Meanwhile, the Chit–MWNTs/Hb/AgNPs/GCE demonstrated excellently electrocatalytical ability to H₂O₂. Its apparent Michaelis–Menten constant (K _M^app) for H₂O₂ was 0.0032 mM, showing a good affinity. Under optimal conditions, the biosensors could be used for the determination of H₂O₂ ranging from 6.25 × 10⁻⁶ to 9.30 × 10⁻⁵ mol L⁻¹ with a detection limit of 3.47 × 10⁻⁷ mol L⁻¹ (S/N = 3). Furthermore, the biosensor possessed rapid response to H₂O₂ and good stability, selectivity, and reproducibility.     

Nanorods of manganese oxides: Synthesis, characterization and catalytic application

Single-crystalline nanorods of β-MnO₂, α-Mn₂O₃ and Mn₃O₄ were successfully synthesized via the heat-treatment of γ-MnOOH nanorods, which were prepared through a hydrothermal method in advance. The calcination process of γ-MnOOH nanorods was studied with the help of Thermogravimetric analysis and X-ray powder diffraction. When the calcinations were conducted in air from 250 to 1050 °C, the precursor γ-MnOOH was first changed to β-MnO₂, then to α-Mn₂O₃ and finally to Mn₃O₄. When calcined in N₂ atmosphere, γ-MnOOH was directly converted into Mn₃O₄ at as low as 500 °C. Transmission electron microscopy (TEM) and high-resolution TEM were also used to characterize the products. The obtained manganese oxides maintain the one-dimensional morphology similar to the precursor γ-MnOOH nanorods. Further experiments show that the as-prepared manganese oxide nanorods have catalytic effect on the oxidation and decomposition of the methylene blue (MB) dye with H₂O₂.     

A hydrogen peroxide biosensor based on direct electrochemistry of hemoglobin in palladium nanoparticles/graphene-chitosan nanocomposite film

Thermally two-dimensional lattice graphene (GR) and biocompatibility chitosan (CS) act as a suitable support for the deposition of palladium nanoparticles (PdNPs). A novel hydrogen peroxide (H₂O₂) biosensor based on immobilization of hemoglobin (Hb) in thin film of CS containing GR and PdNPs was developed. The surface morphologies of a set of representative membranes were characterized by means of scanning electron microscopy and showed that the PdNPs are of a sphere shape and an average diameter of 50 nm. Under the optimal conditions, the immobilized Hb showed fast and excellent electrocatalytic activity to H₂O₂ with a small Michaelis–Menten constant of 16 μmol L⁻¹, a linear range from 2.0 × 10⁻⁶ to 1.1 × 10⁻³ mol L⁻¹, and a detection limit of 6.6 × 10⁻⁷ mol L⁻¹. The biosensor also exhibited other advantages, good reproducibility, and long-term stability, and PdNPs/GR–CS nanocomposites film would be a promising material in the preparation of third generation biosensor.     

Interaction of Molybdenum(VI) with Methyliminodiacetic Acid at Different Ionic Strengths by Using Parabolic,Extended Debye-Hückel and Specific Ion Interaction Models

The main aim of this research is to study the complexation of molybdenum(VI) with methyliminodiacetic acid in NaClO₄ aqueous solutions at pH = 6.00 and ionic strengths (0.1<I/mol⋅dm⁻³<1.0) at 25 °C by using potentiometric and UV spectrophotometric measurements in order to obtain thermodynamic stability constants at I=0 mol⋅dm⁻³. A comparison with previous literature data was made for the stability constants, though few data were available. The stability constants data have been analyzed and interpreted by using extended Debye-Hückel theory, specific ion interaction theory and parabolic model. Finally it might be concluded that parabolic model applies better for this complexation reaction.     

Study of the activation of molecular oxygen in the presence of manganese(II) complexes

The electronic structures of the systems [Mn(phen)₂]²⁺ (I), Mn(HCO₃ ⁻)₂(H₂O)₃ (II), [Mn(phen)₂(H₂O)O₂]²⁺ (III) and [Mn(phen)₂O₂]²⁺ (IV) have been calculated by the IEHM method. The change in the energy barrier for the activation of O₂ (−4.59 eV (III), −4.69 eV (IV) for the elementary step has been calculated using the vibronic activation theory. The formation of an adduct of molecular oxygen with II is shown to be unlikely. Deceased. Translated from Teoreticheskaya i éksperimental’naya Khimiya, Vol. 33, No. 3, pp. 192–195, May–June, 1997.     

Kinetics of oxidation of pyridoxine by anodically generated manganese(III) in aqueous acetic acid medium

Summary Manganese(III) acetate was prepared by the electrolytic oxidation of Mn(OAc)₂ in aqueous AcOH. The electro-generated manganese(III) species was characterised by spectroscopic and redox potential studies. The kinetics of oxidation of pyridoxine (PRX) by manganese(III) in aqueous AcOH were investigated and is first order with respect to [Mn^III]. The effects of varying [Mn^III], [PRX], added manganese(II), pH and added anions such as AcO⁻, F⁻, Cl⁻ and ClO _inf4 ^sup− and SO _inf4 ^sup2− were studied. The rate decreased slowly with increasing [H⁺] up to 0.2 mol dm⁻³ and increased steeply thereafter. The orders in [PRX] and [Mn^II] were unity and inverse fractional, respectively, in both low and high [H⁺] ranges. The dependence of reaction rate on temperature was studied and activation parameters were computed from Arrhenius and Eyring plots. A mechanism consistent with the observed results is proposed and discussed.