Task-specific ionic liquid trioctylmethylammonium salicylate as extraction solvent for transition metal ions

A quaternary ammonium-based room temperature ionic liquid trioctylmethylammonium salicylate (TOMAS) has been studied as an extractant of transition metal ions (Fe³⁺, Cu²⁺, Ni²⁺, Mn²⁺) in aqueous solutions. The effect of pH value on the recovery of metal ions has been investigated. The mechanism of extraction into the ionic liquid has been proposed. The possibility of stripping voltammetric determination of transition metals in aqueous solutions using TOMAS-modified electrodes has been demonstrated.     

Fluorescence signalling of the transition metal ions: Design strategy based on the choice of the fluorophore component

Transition metal ions are notorious for their fluorescence quenching abilities. In this paper, we discuss the design strategies for the development of efficientoff-on fluorescence signalling systems for the transition metal ions. It is shown that even simplefluorophore-spacer-receptor systems can display excellentoff-on fluorescence signalling towards the quenching metal ions when the fluorophore component is chosen judiciously.     

Fluorescence quenching studies on the interaction of a novel deepened cavitand towards some transition metal ions

A novel ‘three-level’ deepened cavitand featuring a significantly sizable portal has been synthesized and its interaction with some transition metal ions has been investigated in THF/H₂O binary solvent using fluorescence quenching technique. The results suggest that among the used transition metal ions including Ag⁺, Cd²⁺, Cu²⁺, Fe³⁺, Cr³⁺, Hg²⁺, La³⁺, Mn²⁺, Ni²⁺, Zn²⁺ and Co²⁺, only Fe³⁺ and Cu²⁺ show good quenching ability. In order to interpret the quenching mechanism, the Stern–Volmer kinetics, and the presence of both the dynamic and static quenching have been discussed. It was found that the simultaneous presence of the sphere-of-action static quenching and dynamic quenching model agrees very well with the experimental results. The limits of detection for Fe³⁺ and Cu²⁺ were found to be 2.1 × 10⁻⁶ mol L⁻¹ (3σ) and 3.6 × 10⁻⁶ mol L⁻¹ (3σ), respectively. Cations with potential interference, such as K⁺, Na⁺, Mg²⁺, Ca²⁺, Co²⁺, La³⁺ and Mn²⁺ do not have significant effects on the determinations of Fe³⁺ and Cu²⁺. This cavitand can be potentially applied as optical sensor for the detection of Fe³⁺ and Cu²⁺.     

Detailed crossover studies of transition metal ions

The complete ligand field, interelectronic repulsion, and spin-orbit interaction matrices were solved for the octahedral and tetrahedrald ⁴ andd ⁶ electron configurations. The results are employed in a detailed study of the crossover region. It is demonstrated that, close to the crossover, complicated mixing and interaction patterns may arise. A sharp crossover is encountered in the octahedrald ⁶ system exclusively where ₁ and ₅ levels are involved. In all situations where the two ground levels transform according to the same irreducible representation, the crossover is redefined by that value of 10Dq where both ground terms participate in the lowest level to equal amounts.

---

Zusammenfassung Die vollständigen Matrizen des Ligandenfeldes, der Elektronenwechselwirkung und der Spin-Bahn-Kopplung wurden für die Elektronenkonfigurationend ⁴ undd ⁶ in Feldern oktaedrischer und tetraedrischer Symmetrie diagonalisiert. Die Ergebnisse werden in einer eingehenden Untersuchung des crossover-Bereiches eingesetzt. Es wird gezeigt, daß komplizierte Mischungs- und Wechselwirkungsstrukturen in der Nähe des Überschneidungspunktes der Grundterme auftreten können. Ein scharfer Schnittpunkt wird allein im oktaedrischend ⁶-System erhalten, wobei die Niveaus ₁ und ₂ unmittelbar beteiligt sind. In allen Fällen, in denen sich die zwei tiefsten Niveaus der zwei Grundterme nach derselben irreduziblen Darstellung transformieren, wird der Überschneidungspunkt durch denjenigen Wert von 10Dq neu definiert, bei dem beide Grundterme zum tiefsten Niveau zu gleichen Teilen beitragen.

     

Laser-induced fragmentation of transition metal nanoparticles in ionic liquids

Stable Pd(0) and Rh(0) nanoparticles with small and narrow size distribution can be prepared from relative large and agglomerated transition-metal particles dispersed in 1-n-butyl-3methylimidazolium hexafluorophosphate ionic liquid by simple laser irradiation. The laser irradiation is a complementary method for the generation of stable metal colloids in ionic liquids and also for the regeneration of small-size nanoparticles that may result from their agglomeration after different applications.     

Well dispersed single-walled carbon nanotubes with strong visible fluorescence in water for metal ions sensing

A novel and simple method to prepare well dispersed single-walled carbon nanotubes with strong visible fluorescence in water is reported. The visible fluorescence was found to be responsive to pH value and metal ions, and tunable emission ability of oxidized SWCNTs depending on the excitation wavelength and a novel self-excitation and emission process were found.     

Dissociative chemistry of ionic transition metal cluster fragments

The ionic fragments formed by collision-induced dissociation of Mn₂(CO) _y ⁺ ions (y=1–10) are reported. The ratio of product ions formed by metal-metal vs. metal-ligand bond cleavage are discussed in terms of the dependence of the metal-metal bond energy on the metal-to-ligand ratio. The collision-induced dissociation data indicate that the metal-metal bond energy of Mn₂(CO) ₅ ⁺ and Mn₂(CO) ₁₀ ⁺ is less than that for Mn₂(CO) _y ⁺ (y=1–4 and 6–9). The product ions arising by metal-metal and metal-ligand bond cleavage reactions for collision-induced dissociation and photodissociation are compared. On the basis of this data and the known photochemistry/photophysics of Mn₂(CO)₁₀, it is proposed that the difference in collision-induced dissociation and photodissociation product ion branching ratios is attributable to spin-orbit transitions of the activated ions.     

Fluorescent sensing of transition metal ions based on the encapsulation of dithranol in a polymeric core shell architecture

The encapsulation behaviour and the resulting transition metal ion sensing capabilities of a 5-arm star-shaped polymer bearing terpyridine ligands on its periphery are described.     

Optically switchable chelates: optical control and sensing of metal ions

This study introduces new concepts in the design, synthesis, and in vitro and in vivo characterization, manipulation, and imaging of organic chelates whose association with metal ions is rapidly and reversibly controlled by using light. Di- and tricarboxylic group bearing photochromes, nitrobenzospiropyran (nitroBIPS), undergo rapid and reversible, optically driven transitions between their spiro (SP) and fluorescent merocyanine (MC) states. The MC state of nitroBIPS-8-DA binds tightly to various metal ions resulting in specific shifts in absorption and fluorescence, and the dissociation constant for its Gadolinium complex in water is measured at approximately 5 microM. The metal-bound MC state is converted to the weaker-binding SP state with use of 543 nm light, while the SP to MC transition is complete with use of 365 or 720 nm (2-photon) light within several microseconds. Fluorescence imaging of the MC state of nitroBIPS-8-TriA was used to quantify the rate and efficiency of optical switching and to provide a real-time readout of the state of the optically switchable chelate within living cells.     

Use of miniaturised isotachophoresis on a planar polymer chip to analyse transition metal ions in solutions from metal processing plants

An electrolyte system, using malic acid as a complexing agent, has been developed to allow the determination of transition metal cations using miniaturised isotachophoresis. The method allowed the simultaneous determination of Mn2+, Cr3+, Fe2+, Co2+, Zn2+ and Ni2+ to be made without interference from other common ions. Limits of detection were calculated to be in the range 0.5-1.0mg l(-1) for Mn2+, Cr3+ Co2+ and Zn2+ and 2.0 mg l(-1) for Fe2+ and 4.7 mg l(-1) for Ni2+. The successful analysis of five industrial samples, containing a range of these metal ions, obtained from metal processing plants were achieved in under 13 min. The separations were performed on a poly(methyl methacrylate) chip with integrated platinum wire conductivity detection electrodes.     

Fluorescence sensing of caffeine in water with polysulfonated pyrenes

The commercially available fluorescence dye 8-hydroxypyrene-1,3,6-trisulfonate (HPTS) can be used as a selective molecular probe for the detection of caffeine in aqueous solution.     

Peculiarities of cyanide-faujasite systems incorporating transition metal ions

Fragments of the corresponding hexacyanoferrates are formed when transition metal ions replace Na⁺ in faujasite containing hexacyanoferrate(II) encapsulated in the large pores.Translated from Teoreticheskaya i Èksperimental'naya Khimiya, Vol. 30, No. 6, pp. 332–336, November–December, 1994.     

Chelation of transition metal ions by peptide nanoring

We have computationally studied the energetics and electronic structures of a chelate system where the guest cation is a transition metal (TM) and the host ligand is a peptide nanoring (PNR). The trapping of a TM cation by a cyclic peptide skeleton is primarily caused by the electrostatic interaction. The exchange interaction plays a secondary role in determining the relative stability in accordance with the spin multiplicity. An interesting feature of this chelate system is that a TM cation can also be trapped by the side-chain aromatic groups of the PNR via pi-d hybridization. However, the spin multiplicity of the system changes the trapped form. When the chelate system has spin singlet multiplicity, a Fe(2+) cation, for example, is not trapped by the single-phenyl group but is preferentially sandwiched by the two phenyl groups. In contrast, a Fe(2+) cation can be trapped by single as well as by double-phenyl groups when the chelate system has higher spin multiplicity, such as triplet and quintet. These two different trapping forms are caused by the difference in the number of valence electrons of TM cations. For this chelate system, the newly occupied molecular orbital (MO) has an interbenzene antibonding character. Therefore, an electron occupying this MO state favors the mutual separation of two benzene molecules. Because the electron occupation of this MO varies in accordance with the spin multiplicity, one can predict the preference for the single-phenyl-group trapping process rather than the double-phenyl-group process systematically as well as consistently.     

The thermochemistry of adsorbates on transition metal cluster ions: relationship to bulk-phase properties

In previous work, guided ion beam tandem mass spectrometry has been used to study the reactions of the cluster cations of several transition metals (V, Cr, Fe and Ni) with D2, O2, CO2 and CD4. By examining the kinetic energy dependence of these reactions and interpreting thresholds observed for various reactions, bond energies for D, O, C, CD, CD2 and CD3 can be obtained. The results of these studies are reviewed with an emphasis on the relationship between the thermochemistry obtained from this work with that for adsorbates on bulk-phase metal surfaces. It is found that in cases where quantitative comparison can be made, for example D and O atoms, modest sized clusters bind these species to approximately the same extent as the bulk-phase surface of the same metal. As there is little information available for the molecular fragments investigated here, the cluster bond energies provide some of the first experimental values for such adsorbates on surfaces.     

Interface properties of ionic liquids containing metal ions: features and potentialities

Interfaces and surfaces are the regions where important events happen: catalysis, molecular recognition, charge transfer, polymerization, and many other critical processes take place at the boundary between one medium and another. In this article we discuss the interface (liquid/air) properties of ionic liquids (ILs) containing dissolved metal ions with the aim to show the possibility to use metal salts to transform ILs and their surfaces into engineered liquid supports to apply in material sciences, separation procedures or to use as optical devices.     

Fluorescence enhancement of a signaling system in the simultaneous presence of transition and alkali metal ions: a potential AND logic gate

Attachment of a laterally non-symmetric cryptand and a macrocycle at the 9- and 10-positions of anthracene leads to a fluorescent signaling system L1 which gives fluorescence enhancement in the simultaneous presence of alkali and transition metal ions.     

Development of nanomaterial chemosensors for toxic metal ions sensing

Heavy metal ions are harmful to aquatic life and humans owing to their high toxicity and non‐biodegradability, so their removal from wastewater is an important task. Therefore, this work focuses on designing suitable, simple and economical nanosensors to detect and remove these metal ions with high selectivity and sensitivity. Based on this idea, different types of mesoporous materials such as hexagonal SBA‐15, cubic SBA‐16 and spherical MCM‐41, their chloro‐functionalized derivatives, as well as 4‐(4‐nitro‐phenylazo)‐naphthalen‐1‐ol (NPAN) azo dye have been synthesized, with the aim of designing some optical nanosensors for metal ions sensing applications. The mentioned azo dye has been anchored into the chloro‐functionalized mesoporous materials. The designed nanosensors were characterized using scanning and transmission electron microscopy as well as Fourier transform infrared and UV–visible spectral analysis, nitrogen adsorption–desorption isotherms, low‐angle X‐ray diffraction and thermogravimetric analyses. Their optical sensing to various toxic metal ions such as Cd (II), Hg (II), Mn (II), Fe (II), Zn (II) and Pb (II) at different values of pH (1.1, 4.9, 7 and 12) was investigated. The optimization of experimental conditions, including the effect of pH and metal ion concentration, was examined. The experimental results showed that the solution pH had a major impact on metal ion detection. The optical nanosensors respond well to the tested metal ions, as reflected by the enhancement in both absorption and emission spectra upon adding different concentrations of the metal salts and were fully reversible on adding ethylene diamine tetra acetic acid or citric acid to the formed complexes. High values of the binding constants for the designed nanosensors were observed at pHs 7 and 12, confirming the strong chelation of different metals to the nanosensor at these pHs. Also, high binding constants and sensitivity were observed for NPAN‐MCM‐41 as a nanosensor to detect the different metal ions. From the obtained results, we succeeded in transforming the harmful azo dye into an environmentally friendly form via designing of the optical nanosensors used to detect toxic metal ions in wastewater with high sensitivity.     

Interpenetrated networks from a novel nanometer-sized pseudopeptidic ligand, bridging water, and transition metal ions with cds topology

The combination of a new pseudopeptidic ligand, transition metal ions, and bridging water molecules results in the formation of [M(mu-TBG)(mu-H2O)(H2O)2].2H2O (M: Cu, Co and H2TBG: terephthaloylbisglycine); both compounds show rare two-fold interpenetrated three-dimensional cds-nets and reversible loss of coordinated and lattice water molecules.     

Complexation of polymethacrylopiperidide with transition metal ions in aqueous solution

The interactions of polymethacrylopiperidide with Cu²⁺, Ni²⁺, Co²⁺ and Fe³⁺ ions have been investigated by potentiometric and conductometric titration, ESR and u.v. spectroscopy, viscometry and sedimentation. The average number of ligands coordinating with the central metal ions and the stability constants of polymeric metal complexes were determined. It is assumed that the polymethacrylopiperidide interacts with transition metal ions through the nitrogen atoms. The influence of spatial arrangement of donor atoms on the coordination ability of polyligand is discussed.