Synthesis and structures of gallium amido imido phenyl clusters (PhGa)(4)(NH(i)Bu)(4)(N(i)Bu)(2) and (PhGa)(7)(NHMe)(4)(NMe)(5)

The phenylgallium-containing clusters constructed with bridging imido and amido ligands, (PhGa)(4)(NH(i)Bu)(4)(N(i)Bu)(2) (1) (51% yield) and (PhGa)(7)(NHMe)(4)(NMe)(5) (2) (31% yield), were synthesized from the room-temperature reactions of bis(dimethylamido)phenylgallium, [PhGa(NMe(2))(2)](2), with isobutylamine and methylamine, respectively. The reaction of [PhGa(NMe(2))(2)](2) in refluxing isobutylamine (85 degrees C) afforded (Ph(2)GaNH(i)Bu)(2) as one of the products, while the reaction of [PhGa(NMe(2))(2)](2) with methylamine at 150 degrees C afforded compound 2 in only 9% yield. Compound 1 possessed an admantane-like Ga(4)N(6) core, whereas compound 2 had a novel Ga(7)N(9) core constructed with both chair- and boat-shaped Ga(3)N(3) rings. The presence of several isomers of compounds 1 and 2 in solution is discussed along the structural similarities with other known gallium-nitrogen clusters and with gallium nitride.     

Insertion reactions of trans-Mo(dmpe)2(H)(NO) with imines

The insertion chemistry of the hydride complex trans-Mo(dmpe)(2)(H)(NO) (1) (dmpe = bis(dimethylphosphino)ethane) with imines has been investigated. It was found that disubstituted aromatic imines RCH[double bond]NR' (R, R' = Ar) insert into the Mo-H bond of 1, while a series of various mono- and other disubstituted imines do not react. The insertion products trans-Mo(dmpe)(2)(NO)[NR'(CH(2)R)] (R = R' = Ph (2); R = Cp(2)Fe, R' = Ph (3); R = Ph, R' = Cp(2)Fe (4); R = 1-naphthyl, R' = Ph (5)) have been isolated and fully characterized by elemental analysis, IR and NMR spectroscopy, and mass spectrometry. The imine PhCH[double bond]NC(10)H(7) (C(10)H(7) = 1-naphthyl) reacted with 1 establishing an equilibrium to produce the nonisolable complex trans-Mo(dmpe)(2)(NO)[NC(10)H(7)(CH(2)Ph)] (6). The equilibrium constant for this reaction has been derived from VT-NMR measurements, and the Delta H and Delta S values of this reaction were calculated to be -48.8 +/- 0.4 kJ.mol(-1) and -33 +/- 1 J.K(-1).mol(-1) reflecting a mild exothermic process and its associative nature. Single-crystal X-ray diffraction analyses were carried out on 2-5.     

Reaction of bis(phosphine)(hydrotris(3,5-dimethylpyrazolyl)borato)rhodium(I) with phenylacetylene,p-nitrobenzaldehyde,and triphenyltin hydride: structures of [Rh(Tp)(PPh(3))(2)], [Rh(Tp)(H)(C(2)Ph)(P(4-C(6)H(4)F)(3))], [Rh(Tp)(H)(COC(6)H(4)-4-NO(2))(PPh(3))], and [Rh(Tp)(H)(SnPh(3))(PPh(3))

The complexes [Rh(Tp)(PPh(3))(2)] (1a) and [Rh(Tp)(P(4-C(6)H(4)F)(3))(2)] (1b) combine with PhC(2)H, 4-NO(2)-C(6)H(4)CHO and Ph(3)SnH to give [Rh(Tp)(H)(C(2)Ph)(PR(3))] (R = Ph, 2a; R = 4-C(6)H(4)F, 2b), [Rh(Tp)(H)(COC(6)H(4)-4-NO(2))(PR(3))] (R = Ph, 3a), and [Rh(Tp)(H)(SnPh(3))(PR(3))] (R = Ph, 4a; R = 4-C(6)H(4)F, 4b) in moderate to good yield. Complexes 1a, 2b, 3a, and 4a have been structurally characterized. In 1a the Tp ligand is bidentate, in 2b, 3a, and 4a it is tridentate. Crystal data for 1a: space group P2(1)/c; a = 11.9664(19), b = 21.355(3), c = 20.685(3) A; beta = 112.576(7) degrees; V = 4880.8(12) A(3); Z = 4; R = 0.0441. Data for 2b: space group P(-)1; a = 10.130(3), b = 12.869(4), c = 17.038(5) A; alpha = 78.641(6), beta = 76.040(5), gamma = 81.210(6) degrees; V = 2100.3(11) A(3); Z = 2; R = 0.0493. Data for 3a: space group P(-)1; a = 10.0073(11), b = 10.5116(12), c = 19.874(2) A; alpha = 83.728(2), beta = 88.759(2), gamma = 65.756(2) degrees; V =1894.2(4) A(3); Z = 2; R = 0.0253. Data for 4a: space group P2(1)/c; a = 15.545(2), b = 18.110(2), c = 17.810(2) A; beta = 95.094(3) degrees; V = 4994.1(10) A(3); Z = 4; R = 0.0256. NMR data ((1)H, (31)P, (103)Rh, (119)Sn) are also reported.     

Reactions of (PCP)Ru(CO)(NHPh)(PMe3) (PCP = 2,6-(CH2PtBu2)2C6H3) with substrates that possess polar bonds

The Ru(II) amido complex (PCP)Ru(CO)(PMe(3))(NHPh) (1) (PCP = 2,6-(CH(2)P(t)Bu(2))(2)C(6)H(3)) reacts with compounds that possess polar C=N, C triple bond N, or C=O bonds (e.g., nitriles, carbodiimides, or isocyanates) to produce four-membered heterometallacycles that result from nucleophilic addition of the amido nitrogen to an unsaturated carbon of the organic substrate. Based on studies of the reaction of complex 1 with acetonitrile, the transformations are suggested to proceed by dissociation of trimethylphosphine, followed by coordination of the organic substrate and then intramolecular N-C bond formation. In the presence of ROH (R = H or Me), the fluorinated amidinate complex (PCP)Ru(CO)(N(Ph)C(C(6)F(5))NH) (6) reacts with excess pentafluorobenzonitrile to produce (PCP)Ru(CO)(F)(N(H)C(C(6)F(5))NHPh) (7). The reaction with MeOH also produces o-MeOC(6)F(4)CN (>90%) and p-MeOC(6)F(4)CN (<10%). Details of the solid-state structures of (PCP)Ru(CO)(F)(N(H)C(C(6)F(5))NHPh) (7), (PCP)Ru(CO)[PhNC{NH(hx)}N(hx)] (8), (PCP)Ru(CO){N(Ph)C(NHPh)O} (9), and (PCP)Ru(CO){OC(Ph)N(Ph)} (10) are reported.     

Hydride transfer reactivity of tetrakis(trimethylphosphine)(hydrido)(nitrosyl)molybdenum(0)

The tetrakis(trimethylphosphine) molybdenum nitrosyl hydrido complex trans-Mo(PMe(3))(4)(H)(NO) (2) and the related deuteride complex trans-Mo(PMe(3))(4)(D)(NO) (2a) were prepared from trans-Mo(PMe(3))(4)(Cl)(NO) (1). From (2)H T(1 min) measurements and solid-state (2)H NMR the bond ionicities of 2a could be determined and were found to be 80.0% and 75.3%, respectively, indicating a very polar Mo--D bond. The enhanced hydridicity of 2 is reflected in its very high propensity to undergo hydride transfer reactions. 2 was thus reacted with acetone, acetophenone, and benzophenone to afford the corresponding alkoxide complexes trans-Mo(NO)(PMe(3))(4)(OCHR'R') (R' = R' = Me (3); R' = Me, R' = Ph (4); R' = R' = Ph (5)). The reaction of 2 with CO(2) led to the formation of the formato-O-complex Mo(NO)(OCHO)(PMe(3))(4) (6). The reaction of with HOSO(2)CF(3) produced the anion coordinated complex Mo(NO)(PMe(3))(4)(OSO(2)CF(3)) (7), and the reaction with [H(Et(2)O)(2)][BAr(F)(4)] with an excess of PMe(3) produced the pentakis(trimethylphosphine) coordinated compound [Mo(NO)(PMe(3))(5)][BAr(F)(4)] (8). Imine insertions into the Mo-H bond of 2 were also accomplished. PhCH[double bond, length as m-dash]NPh (N-benzylideneaniline) and C(10)H(7)CH=NPh (N-1-naphthylideneaniline) afforded the amido compounds Mo(NO)(PMe(3))(4)[NR'(CH(2)R')] (R' = R' = Ph (9), R' = Ph, R' = naphthyl (11)). 9 could not be obtained in pure form, however, its structure was assigned by spectroscopic means. At room temperature 11 reacted further to lose one PMe(3) forming 12 (Mo(NO)PMe(3))(3)[N(Ph)CH(2)C(10)H(6))]) with agostic stabilization. In a subsequent step oxidative addition of the agostic naphthyl C-H bond to the molybdenum centre occurred. Then hydrogen migration took place giving the chelate amine complex Mo(NO)(PMe(3))(3)[NH(Ph)(CH(2)C(10)H(6))] (15). The insertion reaction of 2 with C(10)H(7)N=CHPh led to formation of the agostic compound Mo(NO)(PMe(3))(3)[N(CH(2)Ph)(C(10)H(7))] (10). Based on the knowledge of facile formation of agostic compounds the catalytic hydrogenation of C(10)H(7)N=CHPh and PhN=CHC(10)H(7) with 2 (5 mol%) was tested. The best conversion rates were obtained in the presence of an excess of PMe(3), which were 18.4% and 100% for C(10)H(7)N=CHPh and PhN=CHC(10)H(7), respectively.     

Cluster oxalate complexes [M3(mu3-Q)(mu2-Q2)3(C2O4)3]2- and [Mo3(mu3-Q)(mu2-Q)3(C2O4)3(H2O)3]2- (M = Mo, W; Q = S, Se): mechanochemical synthesis and crystal structure

Mechanochemical reaction of cluster coordination polymers 1infinity[M3Q7Br4] (M = Mo, W; Q = S, Se) with solid K2C2O4 leads to cluster core excision with the formation of anionic complexes [M3Q7(C2O4)3]2-. Extraction of the reaction mixture with water followed by crystallization gives crystalline K2[M3Q7(C2O4)3].0.5KBr.nH2O (M = Mo, Q = S, n = 3 (1); M = Mo, Q = Se, n = 4 (2); M = W, Q = S, n = 5 (3)). Cs2[Mo3S7(C2O4)3].0.5CsCl.3.5H2O (4) and (Et4N)1.5H0.5K{[Mo3S7(C2O4)3]Br}.2H2O (5) were also prepared. Close Q...Br contacts result in the formation of ionic triples {[M3Q7(C2O4)3](2)Br}5- in 1-4 and the 1:1 adduct {[Mo3S7(C2O4)3]Br}3- in 5. Treatment of 1 or 2 with PPh(3) leads to chalcogen abstraction with the formation of [Mo3(mu3-Q)(mu2-Q)3(C2O4)3(H2O)3]2-, isolated as (Ph4P)2[Mo3(mu3-S)(mu2-S)3(C2O4)3(H2O)3].11H2O (6) and (Ph4P2[Mo3(mu3-Se)(mu2-Se)3(C2O4)3(H2O)3].8.5H2O.0.5C2H5OH (7). All compounds were characterized by X-ray structure analysis. IR, Raman, electronic, and 77Se NMR spectra are also reported. Thermal decomposition of 1-3 was studied by thermogravimetry.     

Synthesis and structures of beta-diketiminatotin(II) halides, an amide and of Sn(=E)[{N(R)C(Ph)}2CH](NR2) (E = S or Se, R = SiMe3)

Treatment of [Li(L1)]2 (1) or K(L2) (2) with SnX2 in Et2O yielded the heteroleptic beta-diketiminatotin(II) halides Sn(L1)Cl (3a), Sn(L1)Br (3b) or Sn(L2)Cl (4), even when an excess of the alkali metal beta-diketiminate was used [L1={N(R)C(Ph)}2CH, L2={N(R)C(Ph)CHC(But)N(R)}, R = SiMe3]. From and half an equivalent each of SnCl2.2H2O and SnCl2, or one equivalent of SnCl2.2H2O, the product was Sn(L3)Cl (5) or Sn(L4)Cl (6), in which one or both of the N-R bonds of L1 had been hydrolytically cleaved; the compound Sn(L5)Cl (7) was similarly obtained from and an equivalent portion of SnCl2.2H2O [L3={N(R)C(Ph)CHC(But)N(H)}, L4={N(H)C(Ph)CHC(But)N(H)} and L5={N(H)C(Ph)}2CH]. The halide exchange between 3a and 3b, studied by two-dimensional (119)Sn{1H}-NMR spectroscopy, is attributed to implicate a (mu-Cl)(mu-Br)-dimeric intermediate or transition state. The 13C{1H}-NMR spectra of or showed two distinct resonances for each group, which coalesced on heating, corresponding to DeltaG(338 K)= 69.4 (3a) or 72.8 (3b) kJ mol(-1). The chloride ligand of was readily displaced by treatment with NaNR2, CF3SO3H or CH2(COPh)2, yielding Sn(L1)X [X = NR2 (8), O3SCF3 (9) or {OC(Ph)}2CH (10)]. Oxidative addition of sulfur or selenium to gave the tin(IV) terminal chalcogenides Sn(E)(L1)(NR2)[E = S (11) or Se (12)]. The X-ray structures of the cocrystal of 3a/3b and of the crystalline compounds 5, 6, 8, 11 and are presented, as well as multinuclear NMR spectra of each of the new compounds.     

Synthesis, structural characterization, reactivity, and thermal stability of [eta(5):sigma-Me2C(C5H4)(C2B10H10)]Ti(R)(NMe2)

Reaction of [eta:(5)sigma-Me2C(C5H4)(C2B10H10)]TiCl(NMe2) (1) with 1 equiv of PhCH2K, MeMgBr, or Me3SiCH2Li gave corresponding organotitanium alkyl complexes [eta:(5)sigma-Me2C(C5H4)(C2B10H10)]Ti(R)(NMe2) (R = CH2Ph (2), CH2SiMe3 (4), or Me (5)) in good yields. Treatment of 1 with 1 equiv of n-BuLi afforded the decomposition product {[eta:(5)sigma-Me2C(C5H4)(C2B10H10)]Ti}2(mu-NMe)(mu:sigma-CH2NMe) (3). Complex 5 slowly decomposed to generate a mixed-valence dinuclear species {[eta:(5)sigma-Me2C(C5H4)(C2B10H10)]Ti}2(mu-NMe2)(mu:sigma-CH2NMe) (6). Complex 1 reacted with 1 equiv of PhNCO or 2,6-Me2C6H3NC to afford the corresponding monoinsertion product [eta:(5)sigma-Me2C(C5H4)(C2B10H10)]Ti(Cl)[eta(2)-OC(NMe2)NPh] (7) or [eta:(5)sigma-Me2C(C5H4)(C2B10H10)]Ti(Cl)[eta(2)-C(NMe2)=N(2,6-Me2C6H3)] (8). Reaction of 4 or 5 with 1 equiv of R'NC gave the titanium eta(2)-iminoacyl complexes [eta:(5)sigma-Me2C(C5H4)(C2B10H10)]Ti(NMe2)[eta(2)-C(R)=N(R')] (R = CH2SiMe3, R' = 2,6-Me2C6H3 (9) or tBu (10); R = Me, R' = 2,6-Me2C6H3 (11) or tBu (12)). The results indicated that the unsaturated molecules inserted into the Ti-N bond only in the absence of the Ti-C(alkyl) bond and that the Ti-C(cage) bond remained intact. All complexes were fully characterized by various spectroscopic techniques and elemental analyses. Molecular structures of 2, 3, 6-8, and 10-12 were further confirmed by single-crystal X-ray analyses.     

Insertion reactions of hydridonitrosyltetrakis(trimethylphosphine) tungsten(0)

[W(H)(NO)(PMe3)4] (1) was prepared by the reaction of [W(Cl)(NO)(PMe3)4] with NaBH4 in the presence of PMe3. The insertion of acetophenone, benzophenone and acetone into the W-H bond of 1 afforded the corresponding alkoxide complexes [W(NO)(PMe3)4(OCHR1R2)](R1 = R2 = Me (2); R1 = Me, R2 = Ph (3); R1 = R2 = Ph (4)), which were however thermally unstable. Insertion of CO2 into the W-H bond of yields the formato-O complex trans-W(NO)(OCHO)(PMe3)4 (5). Reaction of trans-W(NO)(H)(PMe3)4 with CO led to the formation of mer-W(CO)(NO)(H)(PMe3)3 (6) and not the formyl complex W(NO)(CHO)(PMe3)4. Insertion of Fe(CO)(5), Re2(CO)10 and Mn2(CO)10 into trans-W(NO)(H)(PMe3)4 resulted in the formation of trans-W(NO)(PMe3)4(mu-OCH)Fe(CO)4 (7), trans-W(NO)(PMe3)4(mu-OCH)Re2(CO)9 (8) and trans-W(NO)(PMe3)4(mu-OCH)Mn2(CO)9 (9). For Re2(CO)10, an equilibrium was established and the thermodynamic data of the equilibrium reaction have been determined by a variable-temperature NMR experiments (K(298K)= 104 L mol(-1), DeltaH=-37 kJ mol(-1), DeltaS =-86 J K(-1) mol(-1)). Both compounds 7 and 8 were separated in analytically pure form. Complex 9 decomposed slowly into some yet unidentified compounds at room temperature. Insertion of imines into the W-H bond of 1 was also additionally studied. For the reactions of the imines PhCH=NPh, Ph(Me)C=NPh, C6H5CH=NCH2C6H5, and (C6H5)2C=NH with only decomposition products were observed. However, the insertion of C10H7N=CHC6H5 into the W-H bond of led to loss of one PMe3 ligand and at the same time a strong agostic interaction (C17-H...W), which was followed by an oxidative addition of the C-H bond to the tungsten center giving the complex [W(NO)(H)(PMe3)3(C10H6NCH2Ph)] (10). The structures of compounds 1, 4, 7, 8 and 10 were studied by single-crystal X-ray diffraction.     

Investigations of the TeCl(4)-(t)BuNHLi Reaction: Synthesis, X-ray Structures, and Fluxional Behavior of the Tellurium-Nitrogen Compounds [Li(2)Te(N(t)Bu)(3)](2), {[LiTe(N(t)Bu)(2)(NH(t)Bu)](2)LiCl}(2), and {Te(2)(N(t)Bu)(4)[LiTe(N(t)Bu)(2)(NH(t)Bu)]LiCl}(2)

The reaction of (t)BuNHLi with TeCl(4) in toluene at -78 degrees C produces (t)BuNTe(&mgr;-N(t)Bu)(2)TeN(t)Bu (1) (55%) or [((t)BuNH)Te(&mgr;-N(t)Bu)(2)TeN(t)Bu]Cl (2) (65%) for 4:1 or 7:2 molar ratios, respectively. The complex {Te(2)(N(t)Bu)(4)[LiTe(N(t)Bu)(2)(NH(t)Bu)]LiCl}(2) (5) is obtained as a minor product (23%) from the 4:1 reaction. It is a centrosymmetric dimer in which each half consists of the tellurium diimide dimer 1 bonded through an exocyclic nitrogen atom to a molecule of LiTe(N(t)Bu)(2)(NH(t)Bu) which, in turn, is linked to a LiCl molecule. Crystals of 5 are monoclinic, of space group C2/c, with a = 27.680(6) ?, b = 23.662(3) ?, c = 12.989(2) ?, beta = 96.32(2) degrees, V = 8455(2) ?(3), and Z = 4. The final R and R(w) values were 0.046 and 0.047. At 65 degrees C in toluene solution, 5 dissociates into 1, LiCl, and {[LiTe(N(t)Bu)(2)(NH(t)Bu)](2)LiCl}(2) (4), which may also be prepared by treatment of [Li(2)Te(N(t)Bu)(3)](2) (6) with 2 equiv of HCl gas. The centrosymmetric structure of 6 consists of a distorted hexagonal prism involving two pyramidal Te(N(t)Bu)(3)(2)(-) anions linked by four Li atoms to give a Te(2)N(6)Li(4) cluster. Crystals of 6 are monoclinic, of space group P2(1)/c, with a = 10.194(2) ?, b = 17.135(3) ?, c = 10.482(2) ?, beta = 109.21(1) degrees, V = 1729.0(5) ?(3), and Z = 2. The final R and R(w) values were 0.026 and 0.023. VT (1)H and (7)Li NMR studies reveal that, unlike 1, compounds 2, 4, and 6 are fluxional molecules. Possible mechanisms for these fluxional processes are discussed.     

Insertion reactions of [M(SR)3(PMe2Ph)2] with CS2 (M = Ru, Os; R = C6F4H-4, C6F5). X-ray structures of [Ru(S2CSC6F4H-4)2(PMe2Ph)2], trans-thiolates [M(SR)2(S2CSR)(PMe2Ph)2] (M = Ru; R = C6F5 and M = Os; R = C6F4H-4), and trans-thiolate-phosphine [Os(SC6F5)2(S2CSC6F5)(PMe2Ph)2

Reactions of [M(SR)(3)(PMe(2)Ph)(2)] (M = Ru, Os; R = C(6)F(4)H-4, C(6)F(5)) with CS(2) in acetone afford [Ru(S(2)CSR)(2)(PMe(2)Ph)(2)] (R = C(6)F(4)H-4, 1; C(6)F(5), 3) and trans-thiolates [Ru(SR)(2)(S(2)CSR)(PMe(2)Ph)(2)] (R = C(6)F(4)H-4, 2; C(6)F(5), 4) or the isomers trans-thiolates [Os(SR)(2)(S(2)CSR)(PMe(2)Ph)(2)] (R = C(6)F(4)H-4, 5; C(6)F(5), 7) and trans-thiolate-phosphine [Os(SR)(2)(S(2)CSR)(PMe(2)Ph)(2)] (R = C(6)F(4)H-4, 6; C(6)F(5), 8) through processes involving CS(2) insertion into M-SR bonds. The ruthenium(III) complexes [Ru(SR)(3)(PMe(2)Ph)(2)] react with CS(2) to give the diamagnetic thiolate-thioxanthato ruthenium(II) and the paramagnetic ruthenium(III) complexes while osmium(III) complexes [Os(SR)(3)(PMe(2)Ph)(2)] react to give the paramagnetic thiolate-thioxanthato osmium(III) isomers. The single-crystal X-ray diffraction studies of 1, 4, 5, and 8 show distorted octahedral structures. (31)P [(1)H] and (19)F NMR studies show that the solution structures of 1 and 3 are consistent with the solid-state structure of 1.     

Polyoxoanions Derived from [gamma-SiO(4)W(10)O(32)](8-)-Containing Oxo-Centered Dinuclear Chromium(III) Carboxylato Complexes: Synthesis and Single-Crystal Structural Determination of [gamma-SiO(4)W(10)O(32)(OH)Cr(2)(OOCCH(3))(2)(OH(2))(2)](5-)

The previously unknown heteropolyoxometalates [gamma-SiO(4)W(10)O(32)(OH)Cr(2)(OOCR)(2)(OH(2))(2)](5-) (R = H, CH(3)) have been prepared by the reaction of [gamma-SiO(4)W(10)O(32)](8-) with [Cr(OH(2))(6)](3+) in formate or acetate buffer solution. Isolation of these new Cr(III)-substituted polyoxometalates was accomplished both as Cs(+) salts and as the Bu(4)N(+) salt for the acetate-containing anion. The compounds were characterized by elemental analysis, UV/vis, IR, and ESR spectroscopy, and cyclic voltammetry. The single-crystal X-ray structural analysis of (Bu(4)N)(3)H(2)[gamma-SiO(4)W(10)O(32)(OH)Cr(2)(OOCCH(3))(2)(OH(2))(2)].3H(2)O [P2(1)2(1)2(1); a = 17.608(12), b = 20.992(13), c = 24.464(11) ?; Z = 4; R = 0.057 for 6549 observed independent reflections] reveals that the two corner-linked CrO(6) octahedra are additionally bridged by two acetate groups, demonstrating the relationship to the well-studied oxo-centered trinuclear carboxylato complexes of Cr(III).     

Diazo complexes of rhenium: preparations and crystal structures of the bis(dinitrogen), [Re(N2)2(PPh(OEt)2)4][BPh4] and methyldiazenido [ReCl(CH3N2)(CH3NHNH2)(PPh(OEt)2)3][BPh4] derivatives

Depending on experimental conditions and the nature of the hydrazine, the reactions of ReCl3P3 [P = PPh(OEt)2] with RNHNH2 (R = H, CH3, tBu) afford the bis(dinitrogen) [Re(N2)2P4]+ (2+), dinitrogen ReClN2P4 (3), and methyldiazenido [ReCl(CH3N2)(CH3NHNH2)P3]+ (1+) derivatives. In contrast, reactions of ReCl3P3 [P = PPh(OEt)2, PPh2OEt] with arylhydrazines ArNHNH2 (Ar = Ph, p-tolyl) give the aryldiazenido cations [ReCl(ArN2)(ArNHNH2)P3]+ (4+) and [ReCl(ArN2)P4]+ (7+) and the bis(aryldiazenido) cations [Re(ArN2)2P3]+ (5+, 6+). These complexes were characterized spectroscopically (IR; 1H and 31P NMR), and the BPh4 complexes 1, 2, and 7 were characterized crystallographically. The methyldiazenido derivative [ReCl(CH3N2)(CH3NHNH2)(PPh(OEt)2)3][BPh4] (1) crystallizes in space group P1 with a = 15.396(5) A, b = 16.986(5) A, c = 11.560(5) A, alpha = 93.96(5) degrees, beta = 93.99(5) degrees, gamma = 93.09(5) degrees, and Z = 2 and contains a singly bent CH3N2, group bonded to an octahedral central metal. One methylhydrazine ligand, one Cl- trans to the CH3N2, and three PPh(OEt)2 ligands complete the coordination. The complex [Re(N2)2(PPh(OEt)2)4][BPh4] (2) crystallizes in space group Pbaa with a = 23.008(5) A, b = 23.367(5) A, c = 12.863(3) A, and Z = 4. The structure displays octahedral coordination with two end-on N2 ligands in mutually trans positions. [ReCl(PhN2)(PPh(OEt)2)4][BPh4] (7) crystallizes in space group P2(1)/n with a = 19.613(5) A, b = 20.101(5) A, c = 19.918(5) A, beta = 115.12(2) degrees, and Z = 4. The structure shows a singly bent phenyldiazenido group trans to the Cl- ligand in an octahedral environment. The dinitrogen complex ReClN2P4 (3) reacts with CF3SO3CH3 to give the unstable methyldiazenido derivative [ReCl(CH3N2)P4][BPh4]. Reaction of the methylhydrazine complex [ReCl(CH3N2)(CH3NHNH2)P3][BPh4] (1) with Pb(OAc)4 at -30 degrees C results in selective oxidation of the hydrazine, affording the corresponding methyldiazene derivative [ReCl(CH3N=NH)(CH3N2)P3][BPh4] (8). In contrast, treatment with Pb(OAc)4 of the related arylhydrazines [ReCl(ArN2)(ArNHNH2)P3][BPh4] (4) [P = PPh(OEt)2] gives the bis(aryldiazenido) complexes [Re(ArN2)2P3][BPh4] (5). Possible protonation reactions of Br?nsted acids HX with all diazenides, 1, 4, 5, 6, and 8, were investigated and found to proceed only in the cases of the bis(aryldiazenido) complexes 5 and 6, affording, with HCl, the octahedral [ReCl(ArN=NH)(ArN2)P3][BPh4] or [ReCl(Ar(H)NN)(ArN2)P3][BPh4] (10) (Ar = Ph; P = PPh2OEt) derivative.     

Facile synthesis of cyclopropene analogues of aluminum and an aluminum pinacolate, and the reactivity of LAl[eta(2)-C(2)(SiMe(3))(2)] toward unsaturated molecules (L=HC[(CMe)(NAr)](2), Ar=2,6-i-Pr(2)C(6)H(3))

Reduction of LAlI(2) (1) (L = HC[(CMe)(NAr)](2), Ar = 2,6-i-Pr(2)C(6)H(3)) with potassium in the presence of alkynes C(2)(SiMe(3))(2), C(2)Ph(2), and C(2)Ph(SiMe(3)) yielded the first neutral cyclopropene analogues of aluminum LAl[eta(2)-C(2)(SiMe(3))(2)] (3), LAl(eta(2)-C(2)Ph(2)) (4), and LAl[eta(2)-C(2)Ph(SiMe(3))] (5), respectively, whereas reduction of 1 in the presence of Ph(2)CO gave an aluminum pinacolate LAl[O(2)(CPh(2))(2)] (6), irrespective of the amount of Ph(2)CO employed. The unsaturated molecules CO(2), Ph(2)CO, and PhCN inserted into one of the Al-C bonds of 3 leading to ring enlargement to give novel aluminum five-membered heterocyclic systems LAl[OC(O)C(2)(SiMe(3))(2)] (7), LAl[OC(Ph)(2)C(2)(SiMe(3))(2)] (8), and LAl[NC(Ph)C(2)(SiMe(3))(2)] (9) in high yields. In contrast, 3 reacted with t-BuCN, 2,6-Trip(2)C(6)H(3)N(3) (Trip = 2,4,6-i-Pr(3)C(6)H(2)), and Ph(3)SiN(3) resulting in the displacement of the alkyne moiety to afford LAl[N(2)(Ct-Bu)(2)] (10) with an unprecedented aluminum-containing imidazole ring, and the first monomeric aluminum imides LAlNC(6)H(3)-2,6-Trip(2) (11) and LAlNSiPh(3) (12). All compounds have been characterized spectroscopically. The variable-temperature (1)H NMR studies of 3 and ESR measurements of 3 and 4 suggest that the Al-C-C three-membered-ring systems can be best described as metallacyclopropenes. The (27)Al NMR resonances of 2 and 3 are reported and compared. Molecular structures of compounds 3, 4, 6.OEt(2), 8.OEt(2), and 9 were determined by single-crystal X-ray structural analysis.     

Rh(I) coordination chemistry of chiral alpha-aminophosphine(eta6-arene)chromium tricarbonyl ligands

The diastereoselective addition of Ph(2)PH to the chiral ortho-substituted eta(6)-benzaldimine complexes (eta(6)-o-X-C(6)H(4)CH=NAr)Cr(CO)(3) (1, X = MeO, Ar = p-C(6)H(4)OMe; 2, X = Cl, Ar = Ph) leads to the formation of the corresponding chiral aminophosphines (alpha-P,N) Ph(2)P-CH(Ar(1))-NHAr(2) (3, Ar(1) = o-C(6)H(4)(OCH(3))[Cr(CO)(3)], Ar(2) = p-C(6)H(4)OCH(3); 4, Ar(1) = o-C(6)H(4)Cl[Cr(CO)(3)], Ar(2) = Ph) in equilibrium with the starting materials. The uncomplexed benzaldimine (o-ClC(6)H(4)CH=NPh), 2', analogously produces an equilibrium amount of the corresponding aminophosphine Ph(2)P-CH(Ar(1))-NHAr(2) (4', Ar(1) = o-C(6)H(4)Cl, Ar(2) = Ph). Depending on the equilibrium constant, the subsequent addition of (1)/(2) equiv of [RhCl(COD)](2) (COD = 1,5-cyclooctadiene) leads to either Ph(2)PH oxidative addition in the case of 3 or to the corresponding [RhCl(COD)(alpha-P,N)] complexes [RhCl(COD)(Ph(2)P-CH[o-C(6)H(4)Cl[Cr(CO)(3)]]-NHPh)] (5) and [RhCl(COD)(Ph(2)P-CH(o-C(6)H(4)Cl)-NHPh)] (5') in the cases of the aminophosphines 4 and 4'. The addition of the latter ligands, as racemic mixtures, to (1)/(4) equiv of [Rh(CO)(2)Cl](2) leads to the [RhCl(CO)(alpha-P,N)(2)] complexes [RhCO(Ph(2)P-CH[o-C(6)H(4)Cl[Cr(CO)(3)]]-NHPh)(2)Cl] (7) or [RhCO(Ph(2)P-CH(o-C(6)H(4)Cl)-NHPh)(2)Cl] (7') as mixtures of (R(C),S(C))/(S(C),R(C)) and (R(C),R(C))/(S(C),S(C)) diastereomers. The rhodium complexes 5 and 7' have been fully characterized by IR and (31)P NMR spectroscopies and X-ray crystallography. These compounds exhibit intramolecular Rh-Cl.H-N interactions in the solid state and in solution. The stability of the new rhodium complexes has been studied under different CO pressures. Under 1 atm of CO, 5 is converted to an unstable complex [RhCl(CO)(2)(alpha-P,N)], 6, which undergoes ligand redistribution leading to 7 plus an unidentified complex. This reaction is inhibited under higher CO or syngas pressure, as confirmed by the observation of the same catalytic activity in hydroformylation when styrene was added to a catalytic mixture that was either freshly prepared or left standing for 20 h under high CO pressure.     

Monodentate sigma-N and Bidentate sigma-N,sigma-N' Coordination of 1,1-Bis((N-p-tolylimino)diphenylphosphoranyl)ethane, CHCH(3)(PPh(2)=NC(6)H(4)-4-CH(3))(2), to Platinum(II)

The new ligand, 1,1-bis((N-p-tolylimino)diphenylphosphoranyl)ethane (1,1-BIPE), 1, has been synthesized by means of a Staudinger reaction of 1,1-bis(diphenylphosphino)ethane (1,1-dppe) with 2 equiv of p-tolylazide. Bridge-splitting reactions of Pt(2)Cl(4)(PR(3))(2) with 1 readily afforded sigma-N monodentate complexes, [PtCl(2)(PR(3)){1,1-BIPE-sigmaN}] (2a, PR(3) = PEt(3); 2b, PR(3) = PMe(2)Ph). Conversion of 2 into the six-membered platinacycle [PtCl(PR(3)){1,1-BIPE-sigmaN,sigmaN'}](+)[X](-) (3) (X = Cl, PtCl(3)(PR(3)), BF(4)) took place after prolonged stirring, its reaction rate being strongly dependent on the type of phosphine (>5 days for 2ain the presence of NaBF(4), 1 h for 2b) and the metal-to-ligand ratio. The compounds 1, 2, and 3 have been fully characterized by (1)H, (31)P{(1)H}, and (13)C{(1)H} NMR and IR spectroscopy, elemental analysis, or FAB mass spectroscopy. The molecular structures of CHCH(3)(PPh(2)=NC(6)H(4)-4-CH(3))(2) (1) and [PtCl(PMe(2)Ph){(N(pTol)=PPh(2))(2)CHCH(3)}](+)[Cl](-) (3b) have been determined by X-ray crystallography. Crystal data for 1: space group P2(1)/c with a = 8.9591(5) ?, b = 19.1961(12) ?, c = 21.9740(9) ?, beta = 105.069(4) degrees, V = 3649.1(3) ?(3), and Z = 4. The structure refinement converged to R = 0.080 and R(w) = 0.109. Crystal data for 3b: monoclinic, space group P2(1)/c with a = 12.4021(7) ?, b = 16.9705(11) ?, c = 23.760(2) ?, beta = 109.544(5) degrees, V = 4712.7(5) ?(3), and Z = 4. The structure refinement converged to R1 = 0.057, wR2 = 0.122. Variable temperature NMR spectroscopy has revealed that complexes 3 exclusively adopt a twisted boat conformation with the methyl group in equatorial position at low temperature, in agreement with the solid state structure of 3b as determined by X-ray crystallography. Boat-to-boat inversion is assumed to take place at temperatures above 293 K. Furthermore, for 3, hindered rotation of one of the p-tolyl substituents on nitrogen has been established at low temperatures.     

1,4-dioxobenzene compounds of gallium: reversible binding of pyridines to [[((t)Bu)(2)Ga](2)(mu-OC(6)H(4)O)](n) in the solid state

The gallium aryloxide polymer, [[((t)Bu)(2)Ga](2)(mu-OC(6)H(4)O)](n)(1) is synthesized by the addition of Ga((t)()Bu)(3) with hydroquinone in a noncoordinating solvent, and reacts with pyridines to yield the yellow compound [((t)()Bu)(2)Ga(L)](2)(mu-OC(6)H(4)O) [L = py (2), 4-Mepy (3), and 3,5-Me(2)py (4)] via cleavage of the Ga(2)O(2) dimeric core. The analogous formation of Ga((t)()Bu)(2)(OPh)(py) (5) occurs by dissolution of [((t)Bu)(2)Ga(mu-OPh)](2) in pyridine. In solution, 2-4 undergo dissociation of one of the pyridine ligands to yield [((t)()Bu)(2)Ga(L)(mu-OC(6)H(4)O)Ga((t)Bu)(2)](2), for which the DeltaH and DeltaS have been determined. Thermolysis of compounds 2-4 in the solid-state results in the loss of the Lewis base and the formation of 1. The reaction of 1 or [((t)Bu)(2)Ga(mu-OPh)](2) with the vapor of the appropriate ligand results in the solid state formation of 2-4 or 5, respectively. The deltaH and deltaS for both ligand dissociation and association for the solid-vapor reactions have been determined. The interconversion of 1 into 2-4, as well as [((t)Bu)(2)Ga(mu-OPh)](2) into 5, and their reverse reactions, have been followed by (13)C CPMAS NMR spectroscopy, TG/DTA, SEM, EDX, and powder XRD. Insight into this solid-state polycondensation polymerization reaction may be gained from the single-crystal X-ray crystallographic packing diagrams of 2-5. The crystal packing for compounds 2, 3, and 5 involve a head-to-head arrangement that is maintained through repeated ligand dissociation and association cycles. In contrast, when compound 4 is crystallized from solution a head-to-tail packing arrangement is formed, but during reintroduction of 3,5-Me(2)py in the solid state-vapor reaction of compound 1, a head-to-head polymorph is postulated to account for the alteration in the deltaH of subsequent ligand dissociation reactions. Thus, the deltaH for the condensation polymerization reaction is dependent on the crystal packing; however, the subsequent reversibility of the reaction is dependent on the polymorph.     

New metalloligands [M(SC[O]Ph)(4)](-): synthesis and characterization of polymeric [A(MeCN)(x)[M(SC[O]Ph)(4)]] compounds (A = Li,Na and K; M = Ga and In; x = 0-2)

Exploiting the ability of the [M(SC[O]Ph)(4)](-) anion to behave like an anionic metalloligand, we have synthesized [Li[Ga(SC[O]Ph)(4)]] (1), [Li[In(SC[O]Ph)(4)]] (2), [Na[Ga(SC[O]Ph)(4)]] (3), [Na(MeCN)[In(SC[O]Ph)(4)]] (4), [K[Ga(SC[O]Ph)(4)]] (5), and [K(MeCN)(2)[In(SC[O]Ph)(4)]] (6) by reacting MX(3) and PhC[O]S(-)A(+) (M = Ga(III) and In(III); X = Cl(-) and NO(3)(-); and A = Li(I), Na(I), and K(I)) in the molar ratio 1:4. The structures of 2, 4, and 6 determined by X-ray crystallography indicate that they have a one-dimensional coordination polymeric structure, and structural variations may be attributed to the change in the alkali metal ion from Li(I) to Na(I) to K(I). Crystal data for 2 x 0.5MeCN x 0.25H(2)O: monoclinic space group C2/c, a = 24.5766(8) A, b = 13.2758(5) A, c = 19.9983(8) A, beta = 108.426(1) degrees, Z = 8, and V = 6190.4(4) A(3). Crystal data for 4: monoclinic space group P2(1)/c, a = 10.5774(7) A, b = 21.9723(15) A, c = 14.4196(10) A, beta = 110.121(1) degrees, Z = 4, and V = 3146.7(4) A(3). Crystal data for 6: monoclinic space group P2(1)/c, a = 12.307(3) A, b = 13.672(3) A, c = 20.575(4) A, beta = 92.356(4) degrees, Z = 4, and V = 3458.8(12) A(3). The thermal decomposition of these compounds indicated the formation of the corresponding AMS(2) materials.     

Synthesis, Structure, and Reactivities of [eta(2)-P(7)M(CO)(4)](3)(-), [eta(2)-HP(7)M(CO)(4)](2)(-), and [eta(2)-RP(7)M(CO)(4)](2)(-) Zintl Ion Complexes Where M = Mo, W

Ethylenediamine (en) solutions of [eta(4)-P(7)M(CO)(3)](3)(-) ions [M = W (1a), Mo (1b)] react under one atmosphere of CO to form microcrystalline yellow powders of [eta(2)-P(7)M(CO)(4)](3)(-) complexes [M = W (4a), Mo (4b)]. Compounds 4 are unstable, losing CO to re-form 1, but are highly nucleophilic and basic. They are protonated with methanol in en solvent giving [eta(2)-HP(7)M(CO)(4)](2)(-) ions (5) and are alkylated with R(4)N(+) salts in en solutions to give [eta(2)-RP(7)M(CO)(4)](2)(-) complexes (6) in good yields (R = alkyl). Compounds 5 and 6 can also be prepared by carbonylations of the [eta(4)-HP(7)M(CO)(3)](2)(-) (3) and [eta(4)-RP(7)M(CO)(3)](2)(-) (2) precursors, respectively. The carbonylations of 1-3 to form 4-6 require a change from eta(4)- to eta(2)-coordination of the P(7) cages in order to maintain 18-electron configurations at the metal centers. Comparative protonation/deprotonation studies show 4 to be more basic than 1. The compounds were characterized by IR and (1)H, (13)C, and (31)P NMR spectroscopic studies and microanalysis where appropriate. The [K(2,2,2-crypt)](+) salts of 5 were characterized by single crystal X-ray diffraction. For 5, the M-P bonds are very long (2.71(1) ?, average). The P(7)(3)(-) cages of 5 are not displaced by dppe. The P(7) cages in 4-6 have nortricyclane-like structures in contrast to the norbornadiene-type geometries observed for 1-3. (31)P NMR spectroscopic studies for 5-6 show C(1) symmetry in solution (seven inequivalent phosphorus nuclei), consistent with the structural studies for 5, and C(s)() symmetry for 4 (five phosphorus nuclei in a 2:2:1:1:1 ratio). Crystallographic data for [K(2,2,2-crypt)](2)[eta(2)-HP(7)W(CO)(4)].en: monoclinic, space group C2/c, a = 23.067(20) ?, b = 12.6931(13) ?, c = 21.433(2) ?, beta = 90.758(7) degrees, V = 6274.9(10) ?(3), Z = 4, R(F) = 0.0573, R(w)(F(2)) = 0.1409. For [K(2,2,2-crypt)](2)[eta(2)-HP(7)Mo(CO)(4)].en: monoclinic, space group C2/c, a = 22.848(2) ?, b = 12.528(2) ?, c = 21.460(2) ?, beta = 91.412(12) degrees, V = 6140.9(12) ?(3), Z = 4, R(F) = 0.0681, R(w)(F(2)) = 0.1399.     

Imide Transfer Properties and Reactions of the Magnesium Imide ((THF)MgNPh)(6): A Versatile Synthetic Reagent

Imide transfer properties of ((THF)MgNPh)(6) (1) and the synthesis of the related species {(THF)MgN(1-naphthyl)}(6).2.25THF (2), via the reaction of dibutylmagnesium with H(2)N(1-naphthyl), in a THF/heptane mixture are described. Treatment of 1 with Ph(2)CO, 4-Me(2)NC(6)H(4)NO, t-BuNBr(2) (3), PCl(3), or MesPCl(2) (Mes = 2,4,6-Me(3)C(6)H(2)-) leads to the isolation of Ph(2)CNPh (4), 4-Me(2)NC(6)H(4)NNPh (5), t-BuNNPh (6), (PhNPCl)(2) (7), or (MesPNPh)(2) (8) in moderate yield. Reaction between 1 and GeCl(2).dioxane, SnCl(2), or PbCl(2) affords the M(4)N(4) (M = Ge, Sn, Pb) cubane imide derivative (GeNPh)(4) (9), [(SnNPh)(4).{MgCl(2)(THF)(4)}](infinity) (10), (SnNPh)(4).0.5PhMe (11), or (PbNPh)(4).0.5PhMe (12). Interaction of 1 with Ph(3)PO, (Me(2)N)(3)PO, or Ph(2)SO furnishes the complex (Ph(3)POMgNPh)(6) (13), {(Me(2)N)(3)POMgNPh}(6).2PhMe (14), or (Ph(2)SOMgNPh)(6) (15). The addition of 3 equiv of MgBr(2) to 1 gives 1.5 equiv of ((THF)Mg)(6)(NPh)(4)Br(4) (16) in quantitative yield, whereas treatment of 16 with 4 equiv of 1,4-dioxane is an alternative synthetic route to 1. Compounds 2, 3, 9, 10, and 14 were characterized by X-ray crystallography. The reactions demonstrate that 1 is a versatile and useful reagent for the synthesis of a variety of main group imides. Crystal data at 130 K with Mo Kalpha (lambda = 0.710 73 ?) radiation for 3 or Cu Kalpha (lambda = 1.541 78 ?) radiation for 2, 9, 10, and 14: 2, C(93)H(108)Mg(6)N(6)O(7.25), a = 28.101(7) ?, b = 35.851(7) ?, c = 36.816(7) ?, Z = 2, space group Fddd, R = 0.068 for 3500 (I > 2sigma(I)) data; 3, C(4)H(9)Br(2)N, a = 6.682(2) ?, b = 10.834(3) ?, c = 11.080(3) ?, alpha = 66.25(2) degrees, beta = 89.88(2) degrees, gamma = 82.53(2) degrees, Z = 4, space group P&onemacr;, R = 0.038 for 2043 (I > 2sigma(I)) data; 9, C(24)H(20)Ge(4)N(4), a = 10.749(2) ?, b = 12.358(3) ?, c = 35.818(7) ?, Z = 8, space group Pbca, R = 0.040 for 2981 (I > 2sigma(I)) data; 10, C(40)H(52)Cl(2)MgN(4)O(4)Sn(4), a = 12.770(3) ?, b = 13.554(3) ?, c = 25.839(5) ?, Z = 4, space group P2(1)2(1)2(1), R = 0.040 for (I > 2sigma(I)) data; 14, C(86)H(154)Mg(6)N(4)O(6)P(6), a = 22.478(4) ?, b = 16.339(3) ?, c = 29.387(6) ?, Z = 4, space group Pbcn, R = 0.081 for 4696 (I >2sigma(I)) data.