具有好的溶解性和高的热稳定性的富勒烯-苝化合物的合成

在氩气保护下,利用N-(正丁基)-N’(4-甲酰基苯氧戊基)-1．6,7,12-四-(4-叔丁基苯氧基)-3,4,9,10-苝酰亚胺和N-甲基甘氨酸产生的亚胺叶立德与富勒烯反应,合成了含富勒烯的苝化合物,用NMR、FT—IR、UV-Vis及TGA等方法对其结构和性能进行了表征和测试。研究结果表明此类化合物具有好的溶解性和高的热稳定性。     

基于环糊精的农药吸附剂的研究进展

农药的研发与使用极大地提高了农作物的产量,为解决人类温饱、改善人类生活品质做出了贡献。但是,农药广泛残留于农副产品以及土壤和水体中,造成的污染日趋严重。残留的农药通常具有微量致毒、难生物降解、生物累积等特性,对生物健康与生态系统造成了巨大威胁。高效检测微量农药、减小污染危害是亟待解决的问题。吸附法具有成本低、操作简单、稳定性强、可重复性强的特点,在农药分离预富集领域得到了广泛关注。作为一种常用的农药吸附剂材料,环糊精是一类具有空腔的超分子化合物,能够作为主体通过主客体作用形成包合物;另外,可以通过醚化、酯化、氧化等化学反应对环糊精进行后修饰以提高其吸附性能。疏水作用、静电作用、范德华力、氢键作用、立体效应协同促进对农药的吸附。环糊精在农药吸附领域已经取得了一定进展,但是目前还没有基于环糊精的农药吸附剂的综述。该文针对杀菌剂、杀虫剂、除草剂、植物生长调节剂这4类农药,系统性地评述了基于环糊精的农药吸附剂的制备、吸附机理及应用,目前存在个别吸附剂吸附容量不高、降解机理不明确、降解产物对环境不友好、容易造成二次污染的问题,研发高吸附容量、易回收、易分离、易再生的基于环糊精的农药吸附剂是未来的主要研究方向。     

基于网络的有机化学试题库的建设

使用ASP.net和SQL server数据库建立有机化学网络试题库,实现了学生开放性学习和教师客观命题的功能,并将试题库按专业课时分层次管理,实现有机化学课程的标准化考试。     

基于钯催化的Catellani反应的Rhazinal的高效全合成

Rhazinal是Rhazinilam家族中的一员,其家族都含有一个因环张力而形成的吡咯-苯胺手性轴,一个高张力的九元内酰胺,一个全碳季碳手性中心以及[3.4]并环结构.Rhazinilam被发现是一个很好的多种癌细胞的抑制剂,具有诱导和促进微管蛋白的聚合、防止解聚、稳定微管的作用.自其被分离之后得到了有机和生物有机化学家的广泛重视,至今已有多个其家族成员的全合成的报道.中国科学技术大学化学系顾振华小组将Pd催化的Catellani反应首次成     

基于压力的速率方程的应用

通过具体实例说明对于气相反应,使用基于压力的速率方程解题比使用基于浓度的速率方程更直接﹑更简便。总结了具有简单级数的反应的基于压力的速率方程及其特征。     

紫精的负离子对耐水的紫精－聚合物膜的光致变色性能的影响

将合不同负离子的苄基紫精分散在混合有ＰＶＰ的ＭＭＡ－ＨＥＭＡ共聚物基质中可制成耐水的光致变色膜。它们的光致变色速度的大小随紫精负离子的不同而有如下序列：这与这些紫精在ＤＭＦ中的溶解度以及在共聚物基质中的溶解性大小的序列相一致．负离子对这些光致变色膜在空气中的氧化退色速度没有很大影响，对这些膜的光疲劳性能的影响也不大。将Ｖ３～Ｖ６分散在不很有ＰＶＰ的ＭＭＡ－ＨＥＭＡ共聚物基质中制成的膜也表现出光致变色的特性，表明它们的多原子负离子本身在聚合物膜中也能充当电子给体的角色．     

气体的溶解度与温度的关系

用热力学原理导出气体在液体中的溶解度与温度之间的关系.当溶解过程减熵时,溶解度随着温度的升高而减小;当溶解过程增熵时,溶解度随着温度的升高而增大.     

酯的水解实验的改进

该文对现行的高中化学 (试验修订本 )第二册中关于乙酸乙酯水解实验的不足之处进行了分析,并提出了改进的方法,对其实验内容和实验效果进行了讨论。     

鲍林的经验教训与信息的关系

分析了鲍林（ＬｉｎｕｓＰａｕｌｉｎｇ，１９０１—１９９４）在事业上成败的经验教训与信息的关系，举例说明了信息给鲍林带来过成功的喜悦，但信息的误导或中断也给鲍林在事业成功的道路上留下了遗憾。     

基于Matlab的二元共聚合反应的竞聚率的求解

以直线交叉法为依据,根据最小二乘原理,采用Matlab GUI工具设计了一款用于计算二元共聚合反应竞聚率的图形用户程序。与传统的求解竞聚率方法相比,该图形用户程序具有设计原理简单、计算快捷的特点;同时程序提供界面简洁、交互友好的数据输入平台,实用性强。实际应用表明:采用该款图形用户程序所测得的数据与微机动态搜索法、Tidwell-Mortimer法相近,而比采用斜率截距法计算竞聚率的最小差方和更小,并且也避免了采用斜率截距法由于所用方程的非对称性造成的计算结果的不一致性。     

基片温度对LiCoO2薄膜结构与电化学性能的影响

采用射频(RF)磁控溅射技术制备了用于全固态薄膜锂电池的非晶态和多晶LiCoO2阴极薄膜,利用XRD和SEM研究了沉积温度对LiCoO2薄膜结构和形貌的影响,并研究了高温退火后薄膜的电化学性能.研究结果表明,随著基片温度的不同,薄膜成分、表面形貌以及电化学行为有明显差异.室温沉积的薄膜很难消除薄膜中Li2CO3的影响,经过高温退火处理后也无法形成有效的多晶LiCoO2薄膜,而150℃沉积的薄膜经过高温退火后形成了有利于锂离子嵌入的多晶LiCoO2结构,薄膜显示出了较好的电化学性能.     

脉冲激光沉积纳米NiO薄膜

Na Cl型 Ni O是一种 p型半导体 ,广泛用于传感器、催化剂、涂料、磁性材料及电极材料等领域[1～ 5] .最近 ,Poizot等 [6] 又报道了 Ni O可作为锂离子电池的阳极材料 ,使 Ni O成为又一新的研究热点 .纳米 Ni O粉末的制备方法有多种 ,主要包括化学沉淀法和沉淀转换法 ,Ni O薄膜的制备主要采用磁控溅射、化学气相沉积和电沉积等方法 [7～ 12 ] .脉冲激光沉积法具有操作简单和成膜纯净等优点 ,因此是制备薄膜的重要方法之一 .本文采用脉冲激光沉积 (PLD)法在氧气氛中使用金属镍作为靶材料 ,不锈钢作为基片 ,对 Ni O薄膜的制备进行了研究…     

基于LiCo0.8M0.2O2(M=Ni,Zr)薄膜的全固态薄膜锂电池

LiCo0.8M0.2O2 (M=Ni,Zr) films were fabricated by radio frequency sputtering deposition combined with conventional annealing methods. The structures of the films were characterized with X-ray diffraction (XRD), Raman spectroscopy and scanning electron microscopy (SEM) techniques. It was shown that the 700 ±C-annealed LiCo0.8M0.2O2 has an @-NaFeO2-like layered structure. All-solid-state thin-film batteries (TFBs) were fabricated with these films as the cathode and their electrochemical performances were evaluated. It was found that doping of electrochemically active Ni and inactive Zr has different effects on the structural and electrochemical properties of the LiCoO2 cathode films. Ni doping increases the discharge capacity of the film while Zr doping improves its cycling stability.     

Xylene as a New Polymerizable Additive for Overcharge Protection of Lithium Ion Batteries

The electrochemical properties and overcharge protection mechanism of xylene as a new polymerizable electrolyte additive for overcharge protection of lithium ion batteries were studied by cyclic voltammetry tests, charge- discharge performance and battery power capacity measurements. It was found that when the battery was overcharged, xylene could electrochemically polymerize at the overcharge potential of 4.3—4.7 V (vs. Li/Li＋) to form a thin polymer film on the surface of the cathode, thus preventing voltage runaway. On the other hand, the use of xylene as an overcharge protection electrolyte additive did not influence the normal performance of lithium ion batteries.     

Materials for all-solid-state thin-film rechargeable lithium batteries by sol-gel processing

A novel all-solid-state thin-film lithium battery has been fabricated by spin coating V₂O₅ and LiClO₄-SiO₂ thin films on a stainless steel substrate. The LiClO₄-SiO₂ electrolyte has been synthesized using a new sol-gel route and it has been characterized by electrochemical impedance spectroscopy. The Li⁺ ion conductivity of the spin-coated thin film thus measured is in the order of 10^–6 S/cm, at 25 °C, which is sufficient for electrolytes in such thin-film batteries. The battery shows a typical discharge capacity of about 150 μAh/mg and satisfactory cathodic efficiency and cycle-life performance. Electronic Publication     

Effect of fullerene coating on silicon thin film anodes for lithium rechargeable batteries

To improve the electrochemical performances of Si thin film anodes for lithium rechargeable batteries, fullerene thin films are prepared by plasma-assisted evaporation methods to be used as coating materials. Analyses via Raman and X-ray photoelectron spectroscopy indicate that amorphous polymeric films originated from fullerene are formed on the surface of the silicon thin film. The electrochemical performance of these fullerene-coated silicon thin film as an anode material for rechargeable lithium batteries has been investigated by cyclic voltammetry, charge/discharge tests, and electrochemical impedance spectroscopy. The fullerene-coated Si thin films demonstrated a high specific capacity of above 3,000 mAh g⁻¹ as well as good capacity retention for 40 cycles. In comparison with bare silicon anodes, the fullerene-coated silicon thin film showed superior and stable cycle performance which can be attributed to the fullerene coating layer which enhances the Li-ion kinetic property at the electrode/electrolyte interface.     

LiCoO2掺杂对锰酸锂结构和性能的影响

用固相反应合成了LiCoO2掺杂改性的LiMn2O4锂离子电池正极材料,优化了LiMn2O4的改性路径及制备条件.利用SEM、XRD对产物的结构进行了表征,并测试了产物的电化学性能.结果表明:所得产物均具有尖晶石型LiMn2O4结构.LiCoO2的掺入增加了尖晶石结构的稳定性,改善了尖晶石型LiMn2O4的充放电循环性能.     

脉冲激光沉积非晶态Ni-V2O5 复合薄膜及其电化学性能研究

首次报道了用355 nm脉冲激光沉积非晶态Ni-V2O5复合薄膜电极的电化学性能.采用不同摩尔比的NixV2O5 靶(x=0.1,0.3,0.5),在不同的基片温度(Ts)和O2气压力下制备了Ni-V2O5复合薄膜.XRD 和SEM测定表明, 在不锈钢基片上, Ts=300℃和氧气压力为14 Pa沉积0.5 h得到的是非晶态的Ni-V2O5薄膜.将此非晶态的Ni0.3V2O5薄膜电极用于锂电池的正极,与纯V2O5薄膜相比,不仅具有良好的放电速率性能和高的比容量,而且其充放电循环稳定性优异.该薄膜电极在放电速率为20 C时测得的比容量达200 mAh/g,并经1000次以上的充放电循环无明显的衰减.     

Synthesis and electrochemical properties of nanostructured LiCoO2 fibers as cathode materials for lithium-ion batteries

Nanostructured LiCoO2 fibers were prepared by the sol-gel related electrospinning technique using metal acetate and citric acid as starting materials. The transformation from the xerogel fibers to the LiCoO2 fibers and the nanostructure of LiCoO2 fibers have been investigated in detail. The LiCoO2 fibers with 500 nm to 2 mum in diameter were composed of polycrystalline nanoparticles in sizes of 20-35 nm. Cyclic voltammetry and charge-discharge experiments were applied to characterize the electrochemical properties of the fibers as cathode materials for lithium-ion batteries. The cyclic voltammogram curves indicated faster diffusion and migration of Li+ cations in the nanostructured LiCoO2 fiber electrode. In the first charge-discharge process, the LiCoO2 fibers showed the initial charge and discharge capacities of 216 and 182 (mA.h)/g, respectively. After the 20th cycle, the discharge capacity decreased to 123 (mA.h)/g. The X-ray diffraction and high-resolution transmission electron microscopy analyses indicated that the large loss of capacity of fiber electrode during the charge-discharge process might mainly result from the dissolution of cobalt and lithium cations escaping from LiCoO2 to form the crystalline Li2CO3 and CoF2 impurities.     

正尖晶石LiMn_2O_4电化学性能研究

采用高温固相反应合成了尖晶石LiMn2 O4 锂离子电池正极材料 ,并对其性能进行研究 .综合考察了影响材料电化学性能的主要因素 ,诸如原材料的选择、合成温度、Li/Mn比以及添加金属元素Co等 .研究了材料在高温下的电化学性能和影响因素 ,并分析了LiMn2 O4 在电解质中的溶解和引起容量衰减的原因