Studies on properties and application of non-protected room temperature phosphorescence of propranolol

A direct and simple non-protected room temperature phosphorimetry (NP-RTP) for determine propranolol, which using I- as a heavy atom perturber and sodium sulfite as a deoxygenator, has been developed. The phosphorescence peak wavelength maxima lambda(ex)/lambda(em) = 288/494, 522 nm. The analytical curve of propranolol gives a linear dynamic range of 8.0 x 10(-8)-2.0 x 10(-5) mol l(-1) and a detection limit of 3 x 10(-8) mol l(-1). The influence of I- concentration on RTP lifetime of propranolol was studied and the luminescence kinetic parameters were calculated. It is found that the relation between I- concentration (x) and RTP lifetime (tau) can be expressed as tau = 1.25e(-0.477x) and the rate constants of phosphorescence emission k(p) was 0.800 per ms. The method was applied directly to determination of propranolol in urine and drug tablets with a satisfactory result. The recoveries were 96.6-97.4% and the relative standard deviation was 2% for the 1.00 x 10(-6)-4.00 x 10(-6) mol l(-1) propranolol in spiked urine sample.     

Study on using I- as heavy atom perturber in cyclodextrin-induced room temperature phosphorimetry

A cyclodextrin induced room temperature phosphorimetry (CD-RTP) for determine beta-NOA, which using I- as a heavy atom perturber (HAP) and sodium sulfite as a deoxygenator, was developed. The phosphorescence peak wavelength maxima lambda(ex)/lambda(em) = 287/496,521 nm. The analytical curve of beta-NOA gives a linear dynamic range of 2.0 x 10(-7)-6.0 x 10(-6) mol/l and a detection limit of 4 x 10(-8) mol/l. The relative standard deviation (RSD; n = 7) was 3.2% for the 4.0 x 10(-6) mol/l beta-NOA in spiked apple samples. The influence of I- concentration on RTP lifetime of beta-NOA was studied in detail, the static Stern-Volmer equation for phosphorescence was derived and the luminescence kinetic parameters were calculated. It is found that the relation between I- concentration (x) and RTP lifetime (tau) can be expressed as tau = 1.047 e(-0.354x) and the rate constants of phosphorescence emission k(p) and non-radiation process k(i) from T1 --> S0 were 0.9551 s(-1) and 0.4276 s(-1) l(-1) mol, respectively.     

Direct determination of naftopidil by non-protected fluid room temperature phosphorescence

A selective and sensitive room temperature phosphorimetric method for the direct determination of naftopidil in biological fluids is described. The method is based on obtaining a phosphorescence signal from this antihypertensive drug using TlNO3 as a heavy atom perturber and Na2SO3 as a deoxygenator agent without a protective medium. This technique is named non-protected room temperature phosphorescence (NP-RTP), and enables us to determine analytes in complex matrices without the need for a tedious prior separation process. The optimization of Na2SO3 (8.5 x 10(-3) M) and the accurate value of pH (9.0) were determined using a simplex as a method of optimization. Sodium carbonate-hydrogencarbonate buffer solution (5.0 x 10(-2) M) was used to adjust the suitable pH. The optimum concentration of Tl+ (8.5 x 10(-2) M) was also determined. The delay time, gate time and time between flashes selected were 200 microseconds, 200 microseconds and 5 ms, respectively. Under the above conditions we propose a method to determine naftopidil by direct measurement of phosphorescence intensity with an emission wavelength of 526 nm and an excitation wavelength of 296 nm in the concentration range 0.05-1.00 mg L-1. Under these conditions the phosphorescence signal appears in 3 min once the sample has been prepared. Optimization of the various conditions permitted the establishment of an NP-RTP method for the determination with a detection limit, according to the error propagation theory, of 21.0 ng mL-1. The repeatability was studied using 10 solutions of 0.20 mg L-1 of naftopidil; if error propagation is assumed, the relative error is 1.39%. The standard deviation for replicate samples was 1.1 x 10(-2) mg L-1. This method was successfully applied to the determination of naftopidil, in human urine with recoveries between 106 and 112%.     

Synthesis of a novel fluorescent probe and investigation on its interaction with nucleic acid and analytical application

A novel fluorescent probe N-(N-(2-(4-morpholinyl)ethyl)-4-acridinecarboxamide)-alpha-alanine (N-(N-(ME)-4-ACA)-alpha-ALA) was synthesized. The structure was characterized by 1H NMR, MS, elemental analysis, fluorescent and ultraviolet spectra. This new compound exhibited high binding affinity to DNA, intense fluorescence and high water solubility. Experiment indicated that the fluorescent intensity was quenched when DNA was added. A method for DNA determination based on the quenching fluorescence (lambda(ex)=258nm, lambda(em)=451nm) of N-(N-(ME)-4-ACA)-alpha-ALA was established. Under optimal conditions (pH 7.2, CN-(N-(ME)-4-ACA)-alpha-ALA)=3 x 10(-6) mol L(-1)), the linear range is 0.1-4.0 microg mL(-1) for both fish semen (fsDNA) and calf thymus DNA (ct-DNA). The corresponding determination limits are 4.6 ng mL(-1) for fsDNA and 5.1 ng mL(-1) for ct-DNA, respectively. The relative standard deviation is 1.0%. Thus this compound can be used as a DNA fluorescent probe. The experiments proved that the interaction mode between N-(N-(ME)-4-ACA)-alpha-ALA and DNA was groove binding. The modified Rosenthal's graphical method gave the binding constant of 1.0 x 10(6) L mol(-1) and a binding size of 0.31 base pairs per bound drug molecule.     

响应面法优化-β-环糊精诱导α-溴代萘的室温磷光测定

建立了α-溴代萘的β-环糊精诱导室温磷光(β-CD-RTP)分析,用3因素、3水平Box-Behnken响应面法(RSM)优化了影响α-溴代萘的RTP实验条件。研究发现:β-CD的浓度、环己烷浓度以及Na_2SO_3浓度等对α-溴代萘的RTP强度均有显著影响;统计结果显示各影响因素的主效应关系为:β-CD浓度NaSO_3浓度环己烷用量。α-溴代萘RTP最佳发光条件为:β-CD的浓度为3.4×10~(-3) mol/L,环己烷的浓度为0.8μL/mL,Na_2SO_3的浓度为9.5×10~(-2) mol/L。优化条件下改进了α-溴代萘RTP分析特性,该方法的线性范围为8.0×10~(-5)~1.0×10~(-7) mol/L,检出限为1.4×10~(-8) mol/L。RSM法与传统的单因素实验法相比,有较宽的线性范围和较低的检出限。     

Highly selective and sensitive reaction of cyanide with 2,2-dihydroxy-1,3-indanedione

A novel reaction of cyanide with 2,2-dihydroxy-1,3-indanedione in the presence of sodium carbonate is described. It is highly selective and sensitive, and suitable for the determination of hydrogen cyanide in the environment and free cyanide ions in water, blood, urine, serum, etc. As little as 1.25x10(-7) mol x L(-1) CN(-) (3.25x10(-9) g x mL(-1) cyanide) can be determined by use of this reaction. The color system obeys Beer's law in the range 10 ng x mL(-1) to 1.0 microg x mL(-1) at 510 nm. The molar absorptivity was 8.0x10(4) L x mol(-1) x cm(-1) for a solution of concentration 0.2 microg x mL(-1). All other important analytical properties of the reaction have been studied. It is proposed that the purple color produced under these reaction conditions is that of 2-cyano-1,2,3-trihydroxy-2 H indene.     

The use of modified simplex method to optimize the room temperature phosphorescence variables in the determination of an antihypertensive drug

In the present paper, the modified simplex method (MSM) has been applied, for the first time, to determine compounds by a luminescence technique. The method was based on the optimization of chemical and instrumental variables affecting phosphorescence using a geometric simplex in two and three dimensions of space, respectively. As application, we have determined a novel antihypertensive drug, naftopidil, in urine and serum, by heavy atom induced room temperature phosphorescence (HAI-RTP); this technique enables us to determine analytes in complex matrices, biological fluids, without the need for a tedious prior separation process. With the proposed method, the maximum signal of phosphorescence appears instantly once the sample has been prepared and the intensity was measured at lambda(ex)=287 nm and lambda(em)=525 nm. Overall least-squares regression was used to find the straight line that fitted the experimental data. The detection limit, as well as the repeatability and the standard deviation (S.D.) for replicate sample, were also determined.     

Stopped-flow determination of dipyridamole in pharmaceutical preparations by micellar-stabilized room temperature phosphorescence

The stopped flow mixing technique has been used to study the kinetic determination of dipyridamole by means of micellar-stabilized room temperature phosphorescence (RTP). This mixing system diminishes the time required for the deoxygenation of the micellar medium by sodium sulfite. The phosphorescence enhancers thallium (I) nitrate, sodium dodecyl sulfate (SDS), and sodium sulfite were optimized to obtain maximum sensitivity and selectivity. A pH value of 10.6 was selected as adequate for phosphorescence development. The kinetic curve of dipyridamole phosphorescence was scanned at λ_ex=303 nm and λ_em=616 nm. Then, the intensity at 10 s, and the maximum slope of phosphorescence development, for an interval time of 1 s, were measured. Two determination approaches: intensity and rate methods, were proposed. The calibration graphs were linear for the concentration range from 50 to 400 ng ml⁻¹. The detection limits, according to Clayton et al., Anal. Chem. 59 (1987) 2506, were 21.5 and 37.5 ng ml⁻¹, for intensity and initial rate measurements, respectively. By applying the error propagation theory, the detection limits were 19.0 and 33.0 ng ml⁻¹, for intensity and initial rate measurements, respectively. Two commercial formulations (persantin and asasantin) were analyzed by both proposed methodologies. Adequate recovery values were obtained in both cases.     

Chemiluminescence determination of sulfite in sugar and sulfur dioxide in air using Tris(2,2'-bipyridyl)ruthenium(II)-permanganate system

A chemiluminescence (CL) detection for the determination of sulfite using the reaction of Ru(bipy)(3)(2+) (bipy=2,2'-bipyridyl) -SO(3)(2-)-KMnO(4) is described. The concentration of sulfite is proportional to the CL intensity from 5.0x10(-8) to 1.25x10(-4) mol l(-1). The limit of detection is 2.5x10(-8) mol l(-1) and the relative standard deviation is 4.9% for the 2x10(-5) mol l(-1) sulfite solution in six repeated measurements. This method has been successfully applied to the determination of sulfite in sugar and sulfur dioxide in air by using triethanolamine (TEA) as the absorbent material.     

Deprotonation and dimerization of maleimide in the triplet state: a laser flash photolysis study with optical and conductometric detection

The photochemistry of maleimide in aqueous solution is governed by the coexistence of up to three different triplet states, the keto triplet (lambda(max)=250, 330 nm, lambda(min)=290 nm, pK(a)=4.4+/-0.1, tau=5 micros), the deprotonated or enolate triplet (lambda(max)=360, 260 nm, lambda(min)=320 nm, shoulder at 370-380 nm) and a dimer triplet. This biradical is formed by the addition of the keto triplet to the double bond of a ground state maleimide in competition with electron transfer, (k( (3)MI+MI)=2.6 x 10(9) dm(3) mol(-1) s(-1)). Its spectrum is identical to that of the maleimide H-adduct radical (lambda(max)=370-380 (broad), 255 nm (narrow), lambda(min)=290 nm) and its lifetime is 110 ns. While protolysis is confined to maleimide and aqueous solutions, the dimer triplet is also found in acetonitrile. Dimer triplet formation is also observed with N-ethylmaleimide. Time-resolved conductometry and buffer experiments were used to characterise excited state protolysis. Multi-wavelength "global analysis" of the time profiles allowed the separation of the transient spectra and study of the kinetics of the monomer and dimer triplets. The cyclobutane dimer yield (determined by GC) is independent of maleimide concentration. This indicates that the dimer triplet does not contribute significantly to the initiation of free-radical polymerisation. Time-dependent Hartree-Fock calculations agree with the experimental data and further confirm the proposed mechanisms.     

Highly sensitive and selective room-temperature phosphorescence determination of thiabendazole by the supramolecular interaction of thiabendazole/beta-cyclodextrin/triton X-100

A strong and stable room temperature phosphorescence (RTP) signal (lambda(ex)/lambda(em) = 298/481 nm) resulting from a 1:1:1 beta-cyclodextrin (beta-CD)/thiabendazole (TBZ)/triton X-100 (TX-100) supramolecular ternary inclusion complex was induced by KI as a heavy atom perturber. Based on the heavy-atom induced RTP, a new phosphorescence method for TBZ determination was established. The analytical curve of TBZ gave a linear range of 20-820 ng mL(-1) with a detection limit and relative standard deviation of 2.1 ng mL(-1) and 1.9%, respectively. The interference of 46 coexisting substances was studied. Compared with the method using a chemical oxygen scavenger, this method is simpler as deoxygenation of the solution is not required. The detection limit and the heavy-atom concentration of the proposed method were decreased about 8 and 4 times, respectively. The lifetime of the phosphorescence was prolonged 9 times and the pH range was greatly broadened. The proposed method has been successfully applied to the determination of TBZ in tap water, lake water and pineapples.     

Specific binding effects for cucurbit[8]uril in 2,4,6-triphenylpyrylium-cucurbit[8]uril host-guest complexes: observation of room-temperature phosphorescence and their application in electroluminescence

2,4,6-Triphenylpyrylium (TP(+)) forms host-guest complexes with cucurbiturils (CBs) in acidic aqueous solutions. (1)H NMR spectroscopic data indicates that complexation takes place by encapsulation of the phenyl ring at the four position within CB. Formation of the complex with CB[6] and CB[7] leads to minor shifts in the fluorescence wavelength maximum (lambda(fl)) or quantum yield (Phi(fl)). In sharp contrast, for complexes with CB[8], the emission results in the simultaneous observation of fluorescence (lambda(fl)=480 nm, Phi(fl)=0.05) and room-temperature phosphorescence (lambda(ph)=590 nm, Phi(ph)=0.15). The occurrence of room-temperature phosphorescence can be used to detect the presence of CB[8] visually in solution. Molecular modeling and MM2 molecular mechanics calculations suggest that this effect arises from locking the conformational mobility of the 2- and 6-phenyl rings as a result of CB[8] encapsulation. The remarkably high room-temperature phosphorescence quantum yield of the TP(+)@CB[8] complex has been advantageously applied to develop an electroluminescent cell that contains this host-guest complex. In contrast, analogous cells prepared with TP(+) or TP(+)@CB[7] fail to exhibit electroluminescence.     

Sensitive and simple determination of the vasodilator agent dipyridamole in pharmaceutical preparations by phosphorimetry

The applicability of heavy atom-induced room-temperature phosphorescence to pharmaceutical samples is demonstrated in this work. Thus a new, simple, rapid, and selective phosphorimetric method for dipyridamole determination is proposed. The phosphorescence signals are a consequence of intermolecular protection when analytes are exclusively in the presence of heavy atom salts and sodium sulfite as an oxygen scavenger to minimize RTP quenching. The determination was performed in 0.1 mol L^–1 thallium(I) nitrate and 8 mmol L^–1 sodium sulfite at a measurement temperature of 20 °C. The phosphorescence intensity was measured at 635 nm, with excitation at 305 nm. Phosphorescence was easily developed; a linear concentration range was obtained between 0 and 100 ng mL^–1 with a detection limit of 940 ng L^–1, an analytical sensitivity of 2.5 ng mL^–1, and a standard deviation of 2.7% at 60 ng mL^–1 concentration. The method has been successfully applied to the analysis of dipyridamole in a unique Spanish commercial formulation containing 100 ng mL^–1 per capsule. The recovery was 101.6% with 6.5% standard deviation of analytical measurement. The method using the standard addition methodology has been validated.     

Monitoring of 8-oxo-7,8-dihydro-2'-deoxyguanosine in urine by high-performance liquid chromatography after pre-column derivatization with glyoxal reagents

A new, simple and sensitive pre-column fluorescence derivatization high-performance liquid chromatographic method for the determination of the oxidative DNA stress marker, 8-oxo-7,8-dihydro-2'-deoxyguanosine, was developed. Solid-phase extraction using an Oasis HLB cartridge avoided troublesome sample preparation steps, interference from charged species and frequent and essential electrode maintenance in electrochemical procedures. 8-Oxo-7,8-dihydro-2'-deoxyguanosine and other guanine compounds were selectively derivatized with glyoxal reagents (phenylglyoxal, 3,4-methylenedioxyglyoxal, 2-naphtylglyoxal and 6-methoxynaphthylglyoxal) at 40-60 degrees C. Derivatization with 6-methoxynaphthylglyoxal at 40 degrees C for 30 min gave the strongest fluorescence product. The fluorescence derivatives from reaction with 6-methoxynaphthylglyoxal were separated on a Capcell Pak C18 SG 120A column (4.6 mm i.d. x 150 mm, 5 microm) with acetonitrile-5 mM phosphate buffer (pH 6.0; 3:7, v/v) as mobile phase. The detection wavelength of the fluorescence derivative of 8-oxo-7,8-dihydro-2'-deoxyguanosine was lambda(ex) 400 nm and lambda(em) 510 nm. The detection limit of 8-oxo-7,8-dihydro-2'-deoxyguanosine was 1 ng/mL using 50 mL of urine. The calibration graphs were linear up to 30 microg/mL for 8-oxo-7,8-dihydro-2'-deoxyguanosine. The relative standard deviation of 20 ng/mL of 8-oxo-7,8-dihydro-2'-deoxyguanosine was 7.0%. The proposed method was compared with the enzymatic ELISA 8-oxo-7,8-dihydro-2'-deoxyguanosine analysis method (8-OH-dG Check, JaICA, Shizuoka, Japan). The correlation coefficient was 0.79 (n = 20) and y = 0.85x + 5.34. The proposed method was applied to the monitoring of 8-oxo-7,8-dihydro-2'-deoxyguanosine in urine from male heavy smokers.     

Simultaneous determination of trace of loxacin, ciprofloxacin, and sparfloxacin by micelle TLC-fluorimetry

The method of simultaneous determination of ofloxacin (OFLX), ciproflxacin (CPLX), and sparfloxacin (SPLX) by thin-layer chromatography is established, with micelle solutions as mobile phases. It is found that the optimum molar ratio of sodium dodecyl sulfate (SDS) to ethylene diamine tetraacetic acid is 0.01:0.1. On the polyamide thin-layer sheet, OFLX, CPLX, and SPLX are separated from each other, and the corresponding Rf values are 0.72, 0.55, and 0.32, respectively. The fluorescence spots are scanned with a spectrodensitometer at the excitation wavelength of 282 nm. The cut-off filter is set at 400 nm. The detection limits are 2 x 10(-6) mol/L for OFLX, 1.5 x 10(-6) mol/L for CPLX, and 1.6 x 10(-6) mol/L for SPLX, and the respective linear ranges correspondingly fell in the concentration of 1 x 10(-5) to 4 x 10(-4) mol/L for OFLX, 1 x 10(-5) to 4.5 x 10(-4) mol/L for CPLX, and 1 x 10(-5) to 4.2 x 10(-4) mol/L for SPLX. For all the three components, the relative standard deviations are in the range of 1.12-5.82%, and the recoveries are found to be 96.7-104.2% in urine and serum samples.     

毛细管电泳在线化学发光分离及检测铬（Ⅲ）与钒（Ⅴ）

基于在碱性介质中 Cr( )和 V( )对鲁米诺和过氧化氢的催化化学发光反应 ,研究了毛细管电泳在线化学发光分离和检测 Cr( )和 V( )。方法简便、快速、灵敏、进样量少。 Cr( )和 V( )的检出限分别为 7.8× 1 0 - 8mol/L和 5.0× 1 0 - 6mol/L ,线性范围分别是 32～ 80 ng/m L和 0 .55～ 3.0μg/m L     

Synthesis of bis(amino alcohol)oxalamides and their usage for the preconcentration of trace metals by cloud point extraction.

C(2)-Symmetric two bis(amino alcohol)oxalamides (diamidediols) were synthesized and fully characterized. A new method was developed and successfully applied for the simultaneous preconcentration of both trace and toxic metals in water, by using C(2)-symmetric compounds. Under the optimum experimental conditions (i.e. pH = 10.0 +/- 0.2, 2.75 x 10(-3) mol L(-1) N,N'-bis[(1R)-1-ethyl-2-hydroxyethyl]ethanediamide (DAD1), 1.75 x 10(-3) mol L(-1) N,N'-bis[(1S)-1-benzyl-2-hydroxyethyl]-ethanediamide (DAD2), 0.10% w/v octylphenoxy-polyethoxyethanol (Triton X-114)), calibration graphs were linear in the range of 2.5 - 25.0 ng mL(-1) for Cu and Cd, 5.0 - 25.0 ng mL(-1) for Co and Ni. The enrichment factors were 18, 23, 18 and 20 for Cd, Cu, Co and Ni in the case of DAD1, respectively; 20, 22, 17 and 20 for Cd, Cu, Co and Ni in the case of DAD2. The limits of detection for DAD1 were found to be 0.45, 0.50, 1.25 and 0.60 ng mL(-1) for Cd, Cu, Co and Ni, respectively, and for DAD2 were found to be 0.44, 0.25, 0.60 and 1.55 ng mL(-1) for Cd, Cu, Co and Ni, respectively. The developed method was applied to the determination of Cu, Cd, Co and Ni in water samples and certified reference materials with satisfactory results.     

Flow-injection chemiluminescence determination of chlorinated isocyanuric acids

A rapid and sensitive flow-injection chemiluminescence method is described for the determination of dichloro- and trichloroisocyanuric acids based on the chemiluminescence produced during their reaction with luminol in alkaline medium. The effects of analytical and flow-injection variables on these chemiluminescence systems and determination of both oxidants are discussed. The optimized method yielded 3sigma detection limits of 8x10(-8) and 5x10(-8) mol L(-1) for the sodium dichloroisocyanurate and trichloroisocyanuric acid, respectively. The optimum conditions were found to be as follows: NaOH, 1x10(-1) mol L(-1); luminol, 5x10(-3) mol L(-1); KI, 2x10(-3) mol L(-1) and flow rate, 3.5 mL min(-1).     

Influence of Cu(II) on the interaction between sulfite and horseradish peroxidase in vitro

This paper discussed the quantitative influence of Cu(II) on the interaction between horseradish peroxidase (HRP) and sulfite (SO3(2-)), which is a derivate of sulfite dioxide in human bodies, by using fluorescence spectrum and ultraviolet (UV) absorption spectrometry in vitro. The results show that under the conditions of physiological pH and room-temperature, Cu(II) can bind strongly with both the protein part and the ferroporphyrin part in HRP at a low concentration (10(-4) mol L(-1)), and the combination constants are 2.047 x 10(3) and 7.66 x 10(2) L mol(-1), respectively. Under the same conditions, SO3(2-) at low concentrations (<0.15 mol L(-1)) has little quenching for the fluorescence of HRP at 330 nm, and the combination constant is 0.108 L mol(-1). While the fluorescence intensity at 440 nm enhance gradually with the increased concentration of SO3(2-) (<0.1 mol L(-1)), and the combination constant is 8.219 L mol(-1). These indicate that SO3(2-) at low concentration has little reaction with the enzyme protein part in HRP but obvious reaction with the ferroporphyrin part in HRP. After SO3(2-) at low concentrations is added into the HRP-Cu(II) binary system, the reaction constants between SO3(2-) and the enzyme protein part in HRP increase rapidly. Compared with the absence of Cu(II), the combination constant of SO3(2-) with the enzyme protein part in HRP increases nearly 70 times with a certain Cu(II) concentration (5.0 x 10(-4) mol L(-1)) in the system. However, the presence of Cu(II) in the system has little effect on the reaction constants between SO3(2-) and the ferroporphyrin part in HRP.     

Determination of ng rivanol in human plasma by SPE-HPLC method

A high-performance liquid chromatography assay is described for the determination of rivanol in human plasma. Solid-phase extraction cartridges are used to extract plasma samples. Separation is done by using a C18 column. The mobile phase is a mixture of methanol-0.05% sodium dodecylsulfonate (70:30, v/v, pH 3), with the flow rate at 1.0 mL/min. UV detection of rivanol is at 272 nm. The calibration curve is linear in the concentration range of 1x10(-8) mol/L to 1x10(-5) mol/L with linear correlation coefficient r equal to 0.9998. The limit of detection for the assay is 3x10(-9) mol/L, corresponding to 1.1 ng/mL. Precision, expressed as the within- and between-day coefficient of variation, is 3.3-8.1% and 4.1-9.5%, respectively, at plasma control samples of 5x10(-8), 5x10(-7), and 5x10(-6) mol/L. And the recovery ranges from 94.8% to 107.2%. The selectivity of the method is confirmed. Plasma samples are stable for at least 15 days if they are stored lightproof at -20 degrees C. This method is simple, sensitive, and accurate, and it allows for the determination ng rivanol in human plasma. It could be applied to assessing its plasma level in women receiving an intra-amniotic injection of rivanol.