Fidelity of polymerase chain reaction-direct sequencing analysis of damaged forensic samples

Polymerase chain reaction (PCR) direct sequence analysis was performed on aged forensic samples, six or thirteen years old. This method allowed unambiguous genetic typing, but PCR products from such samples showed several artifacts. Control samples generated sequence ambiguities at a frequency of 1 in 567 bases, but the aged samples had an error frequency about 30-fold higher. In order to study the molecular composition of these aged DNA samples, reversed-phase high performance liquid chromatography (HPLC) was performed. Reduced amounts of the four DNA bases were observed and anomalous peaks were found. These peaks were analyzed by ionization mass spectrometry and identified as molecular products of DNA oxidation. The frequency of sequencing artifacts was found to be proportional to the decay of the PCR templates. Although PCR fidelity is a relevant concern in the forensic analysis of damaged samples, our data indicate that the risk of mistyping is circumventable by sequencing both strands and by performing replicate amplifications from the same PCR template.     

"In-gel patch electrophoresis:" a new method for environmental DNA purification

Most of the microorganism species are largely untapped and could represent an interesting reservoir of genes useful for biotechnological applications. Unfortunately, a major difficulty associated with the methods used to isolate environmental DNA is related to the contamination of the extracted material with humic substances. These polyphenolic compounds inhibit the DNA processing reactions and severely impede cloning procedures. In this work, we describe a rapid, simple, and efficient method for the purification of genomic DNA from environmental samples: we added a chromatography step directly embedded into an agarose gel electrophoresis. This strategy enabled the DNA extraction from various environmental samples and it appeared that the purity grade was compatible with digestion by restriction enzymes and polymerase chain reaction (PCR) amplifications.     

SNPlexing the human Y-chromosome: a single-assay system for major haplogroup screening

SNPs are one of the main sources of DNA variation among humans. Their unique properties make them useful polymorphic markers for a wide range of fields, such as medicine, forensics, and population genetics. Although several high-throughput techniques have been (and are being) developed for the vast typing of SNPs in the medical context, population genetic studies involve the typing of few and select SNPs for targeted research. This results in SNPs having to be typed in multiple reactions, consuming large amounts of time and of DNA. In order to improve the current situation in the area of human Y-chromosome diversity studies, we decided to employ a system based on a multiplex oligo ligation assay/PCR (OLA/PCR) followed by CE to create a Y multiplex capable of distinguishing, in a single reaction, all the major haplogroups and as many subhaplogroups on the Y-chromosome phylogeny as possible. Our efforts resulted in the creation of a robust and accurate 35plex (35 SNPs in a single reaction) that when tested on 165 human DNA samples from different geographic areas, proved capable of assigning samples to their corresponding haplogroup.     

Voltage-induced release of nucleic acids from palaeontological samples

Most of the protocols for the recovery of ancient DNA from palaeontological specimens are time-consuming and tend to yield inconsistent polymerase chain reaction (PCR) results. "Voltage-induced release" is a novel and rapid approach for the extraction of ancient DNA. Nucleic acids are directly electrophoresed out of powder derived from hard and soft tissues. This technique is much faster than other methods in which pulverized tissue conventionally undergoes time-consuming crude lysis steps. The total preparation time is 5-6 h. The reliability of the voltage-induced release method was validated by (i) measuring the ratio of D-to L-enantiomers of the amino acids aspartic acid, alanine, and leucine, and (ii) by specific PCR amplification of four single-copy markers of human chromosome 17 and 18. We compare voltage-induced release to a frequently used silica-based protocol. DNA extracted employing voltage-induced release was more effective in PCR amplifications, which may be attributed to the effective removal of PCR inhibitors.     

High-throughput single nucleotide polymorphism typing by fluorescent single-strand conformation polymorphism analysis with capillary electrophoresis

In this study, we performed high-throughput and precise single nucleotide polymorphism (SNP) typing by fluorescent capillary electrophoresis single-strand conformation polymorphism (CE-SSCP) analysis. A system composed of a multicapillary DNA analyzer, a newly developed sieving matrix, four different colors of fluorescent labels, and a multiplex polymerase chain reaction (PCR) enabled low-cost and highly reliable SNP typing. Moreover, this system enabled the estimation of SNP allele frequencies using pooled DNA samples, which should be beneficial for large-scale association studies. Thus, fluorescent CE-SSCP analysis is a useful method for large-scale SNP typing.     

Design of a fraction collector for capillary array electrophoresis

This paper describes a prototype instrument for high-throughput fraction collection with capillary array electrophoresis (CAE). The design of the system was based on a comprehensive collection approach, in which fractions from all capillaries were simultaneously collected in individual collection microwells in predefined time intervals. The location of the fractions in the microwells on the collection plate was determined by monitoring the individual zone velocities close to the end of each capillary. The collection microwell plate was fabricated from buffer-saturated agarose gel, which maintained permanent electrical contact with the separation capillaries during the collection process. Since the collection gel plate consisted of over 90% water, liquid evaporation from the collection wells was minimized. A 12-capillary array instrument was built with two-point detection using a side illumination scheme. The collection performance was demonstrated by reinjection of selected fractions of a double-stranded DNA (dsDNA) separation. The identity of collected DNA fragments was confirmed by PCR and sequencing.     

Automated, fluorescence-based approach for the specific diagnosis of chicken coccidiosis.

We have established a fluorescence-based electrophoretic approach for the specific identification of all seven currently recognised species of Eimeria infecting chickens. The second internal transcribed spacer (ITS-2) of ribosomal DNA is amplified by polymerase chain reaction (PCR) from any of the seven species using a single set of oligonucleotide primers (of which the reverse one is fluorescently labelled). The amplicons are heat-denatured, subjected to denaturing polyacrylamide gel electrophoresis in a 377 DNA sequencer (ABI). The chromatograms produced are stored electronically and then analysed using GeneScan 3.1 software. Using control DNA samples representing monospecific lines of Eimeria, regions in the chromatograms have been defined for the specific identification of each of the seven species, although some variation in the chromatograms (reflecting population variation) was detectable within two species. Electrophoretic reading and analysis is carried out automatically using a computer imaging system, thus making it a time- and cost-effective approach. It is well suited for high-throughput diagnostic screening of oocyst samples and should find applicability as a tool for prevalence studies, monitoring of coccidiosis outbreaks and the quality control of vaccines.     

Multiplex primer extension analysis for rapid detection of major European mitochondrial haplogroups

The evolution of the human mitochondrial genome is reflected in the existence of ethnically distinct lineages or haplogroups. Alterations of mitochondrial DNA (mtDNA) have been instrumental in studies of human phylogeny, in population genetics, and in molecular medicine to link pathological mutations to a variety of human diseases of complex etiology. For each of these applications, rapid and cost effective assays for mtDNA haplogrouping are invaluable. Here we describe a hierarchical system for mtDNA haplogrouping that combines multiplex PCR amplifications, multiplex single-base primer extensions, and CE for analyzing ten haplogroup-diagnostic mitochondrial single nucleotide polymorphisms. Using this rapid and cost-effective mtDNA genotyping method, we were able to show that within a large, randomly selected cohort of healthy Austrians (n = 1172), mtDNAs could be assigned to all nine major European haplogroups. Forty-four percent belonged to haplogroup H, the most frequent haplogroup in European Caucasian populations. The other major haplogroups identified were U (15.4%), J (11.8%), T (8.2%) and K (5.1%). The frequencies of haplogroups in Austria is within the range observed for other European countries. Our method may be suitable for mitochondrial genotyping of samples from large-scale epidemiology studies and for identifying markers of genetic susceptibility.     

Optimization of direct whole blood PCR amplification with applications on a static thermostat chip

In this paper, direct whole blood PCR amplifications on a static chip thermostat without sample purifications are demonstrated; in these amplifications, problems such as cross-interferences and contaminations could be avoided. The amplification conditions, such as the compositions of reagents and thermal programs, were investigated systematically by a GeneAmp PCR system with a native p53 gene segment (about543 bp) of human genome and an exterior lambda DNA segment (about 500 bp) as targets. Direct amplifications of p53 and K-ras (about 157 bp) gene segments from 0.5 μL blood samples were successfully demonstrated by a static PCR chip with an indium tin oxide glass substrate. The chip thermostat has a typical size of 25 mm × 25 mm, and a polyethylene tube was used as the PCR vial on the glass surface of the chip. Fuzzy proportional integration–differentiation algorithms were adopted in temperature controls of the chip with an aid of a micro-Pt100 sensor. In the direct PCR with the thermostat chip, the whole process only involves automatic thermal programs. This work demonstrated that a chip PCR for field test without desktop facilities is possible either for a point of care test or for forensic analysis. Figure Photo of the glass static thermostat chip with 2 PCR reaction vials Electronic supplementary material The online version of this article (doi:) contains supplementary material, which is available to authorized users.     

Capillary zone electrophoresis separation and collection of spermatozoa for the forensic analysis of sexual assault evidence

The processing of sexual assault kits (SAKs) relies on the genetic analysis of material extracted from swabs collected from the assault victim. A vital step in producing an identifiable DNA profile of the perpetrator is the effective separation of perpetrator (sperm) and victim (epithelial) DNA that have been isolated from the collected evidence. We report the use of capillary zone electrophoresis for the separation of intact sperm from whole and lysed epithelial cells in SAKs. The separated components are deposited into wells of a microtiter plate using a computer-controlled fraction collector, and quantitative PCR is used to verify the collection of sperm cells by targeted amplification of male DNA. We present results from simulated sexual assault samples that have been aged for up to 18 months, as well as vaginal swabs from authentic forensic kits. Components extracted from the vaginal swabs from the SAK comigrated with an aged semen sample at 6.25 ± 0.25 min. Epithelial cells migrated from 10-12 min, producing baseline resolution of the components. Sperm cells were collected in a microtiter plate for downstream analysis.     

1-Million droplet array with wide-field fluorescence imaging for digital PCR

Digital droplet reactors are useful as chemical and biological containers to discretize reagents into picolitre or nanolitre volumes for analysis of single cells, organisms, or molecules. However, most DNA based assays require processing of samples on the order of tens of microlitres and contain as few as one to as many as millions of fragments to be detected. Presented in this work is a droplet microfluidic platform and fluorescence imaging setup designed to better meet the needs of the high-throughput and high-dynamic-range by integrating multiple high-throughput droplet processing schemes on the chip. The design is capable of generating over 1-million, monodisperse, 50 picolitre droplets in 2-7 minutes that then self-assemble into high density 3-dimensional sphere packing configurations in a large viewing chamber for visualization and analysis. This device then undergoes on-chip polymerase chain reaction (PCR) amplification and fluorescence detection to digitally quantify the sample's nucleic acid contents. Wide-field fluorescence images are captured using a low cost 21-megapixel digital camera and macro-lens with an 8-12 cm(2) field-of-view at 1× to 0.85× magnification, respectively. We demonstrate both end-point and real-time imaging ability to perform on-chip quantitative digital PCR analysis of the entire droplet array. Compared to previous work, this highly integrated design yields a 100-fold increase in the number of on-chip digitized reactors with simultaneous fluorescence imaging for digital PCR based assays.     

Terahertz-time domain spectroscopy for the detection of PCR amplified DNA in aqueous solution

In this work we present a label free quantitative detection method for DNA samples amplified by polymerase chain reaction (PCR) in aqueous medium using terahertz-time domain spectroscopy (THz-TDS) in the frequency range from 0.3 to 1.2 THz. The DNA samples of 133 and 697 base pairs were prepared using PCR. We measured the absorption coefficients of DNA solutions in the concentration range of 0-0.3 ng μl(-1). For both DNA types, the absorption coefficients decreased with increasing DNA concentrations. The average change in absorption coefficients compared to buffer within the frequency range of 0.8-1.0 THz showed a linear behavior. Our results demonstrate that THz-TDS can detect PCR amplified DNA in aqueous solution with a minimum concentration of 0.1 ng μl(-1) and a minimum sample volume of 10 μl.     

Electrochemical genosensor array for the simultaneous detection of multiple high-risk human papillomavirus sequences in clinical samples

An electrochemical genosensor array for the simultaneous detection of three high-risk human papillomavirus (HPV) DNA sequences, HPV16, 18 and 45, exhibiting high sensitivity and selectivity is presented. The electrodes of a 4 × 4 array were modified via co-immobilization of a 1:100 (mol/mol) mixture of a thiolated probe and an oligoethyleneglycol-terminated bipodal thiol. Detection of synthetic and PCR products was carried out in a sandwich type format, with the target hybridized between a surface immobilized probe and a horseradish peroxidase-labelled secondary reporter probe. The detection limits obtained in the detection of each individual target were in the pM range, allowing the application of this sensor for the detection of samples obtained from PCR amplification of cervical scrape samples. The results obtained exhibited an excellent correlation with the HPV genotyping carried out within a hospital laboratory. Multiplexing and cross-reactivity studies demonstrated high selectivity over potential interfering sequences, facilitating application of the developed platform for the high-throughput screening of multiple high-risk DNA sequences.     

Plastic microchip electrophoresis for genetic screening: the analysis of polymerase chain reactions products of fragile X (CGG)n alleles

Clinical screening of abnormal chromosomes associated with fragile X syndrome (FXS) demands a high-throughput method including DNA sizing and detection of the amplified products. This study is to explore the use of polymer microchip electrophoresis for the analysis of polymerase chain reaction (PCR) products of fragile X (CGG)n alleles to facilitate a fast exclusion test of FXS. The sequences flanking the CGG-repeat of FMR1 gene was amplified by betaine-PCR and the amplified products were desalted and then analyzed by microchips which were fabricated on poly(methyl methacrylate) (PMMA) substrate. The PCR bands with more than six CGG-repeats in difference could be clearly distinguished in less than 3 min by microchip electrophoresis with a separation length of 6 cm. It was found that the signal was greatly enhanced with the use of both covalent (Cy5) and intercalating dye (TORRO-3), which has never been demonstrated before. We tested the method by reanalysis of twelve samples from males and six samples from females. For female samples with less than six repeat differences, Southern blotting method was performed to confirm or exclude the findings from microchips. It was found that the test results from all male and female samples show a 100% correlation between the microchip electrophoresis and the existing methods.     

An automated capillary electrophoresis system for high-speed separation of DNA fragments based on a short capillary

A high-speed DNA fragment separation system was developed based on a short capillary and a slotted-vial array automated sample introduction system. The injection process of DNA sample in a short capillary was investigated systematically with three injection techniques including constant-field-strength, low-field-strength and translational spontaneous injections. Under the optimized conditions, picoliter-scale sample plugs (corresponding to ca. 20-μm plug length) were obtained, which ensure the high-speed and high-efficiency separation for DNA fragments with a short effective separation length. Other separation conditions including the sieving matrix concentration, separation field strength and effective separation length were also optimized. The present system was applied in the separation of ΦX174-Hae III digest DNA marker. With an effective separation length of 2.5 cm, the separation could be achieved in <100 s with plate heights ranging from 0.21 to 0.74 μm (corresponding to plate numbers from 4.86 × 10(6) to 1.36 × 10(6)/m). The repeatabilities for the migration time of the eleven fragments were between 0.4 and 1.1% RSD (n=8). By using the automated continuous injection method, the separation for four different DNA samples could be achieved within 250 s. The present system was further applied in the fast sizing of real DNA samples of PCR products.     

Evaluation of whole-genome amplification of low-copy-number DNA in chimerism analysis after allogeneic stem cell transplantation using STR marker typing

Whole-genome DNA amplification (WGA) is a promising method that generates large amounts of DNA from samples of limited quantity. We investigated the accuracy of a multiplex PCR approach to WGA over STR loci. The amplification bias within a locus and over all analyzed loci was investigated in relation to the amount of template in the WGA reaction, the specific STR locus, and allele length. We observed reproducible error-free STR profiles with 10 ng down to 1 ng of DNA template. The amplification deviation at a locus and between loci was within the intra-method reproducibility. WGA is the method of choice for amplifying nanogram amounts of genomic DNA for different applications. We detected unbalanced STR amplifications at one locus and between loci, allelic drop-outs, and additional alleles after WGA of low-copy-number DNA. We found that the high number of drop-outs and drop-ins could be eradicated using pooled DNA from separate WGA reactions even with as little as 100 pg of starting template. Nevertheless, the quality of the results was still not sufficient for use in routine chimerism analysis of limited specific cell populations after allogeneic stem cell transplantation.     

Usefulness of microchip electrophoresis for the analysis of mitochondrial DNA in forensic and ancient DNA studies

We evaluate the usefulness of a commercially available microchip CE (MCE) device in different genetic identification studies performed with mitochondrial DNA (mtDNA) targets, including the haplotype analysis of HVR1 and HVR2 and the study of interspecies diversity of cytochrome b (Cyt b) and 16S ribosomal RNA (16S rRNA) mitochondrial genes in forensic and ancient DNA samples. The MCE commercial system tested in this study proved to be a fast and sensitive detection method of length heteroplasmy in cytosine stretches produced by 16 189T>C transitions in HVR1 and by 309.1 and 309.2 C-insertions in HVR2. Moreover, the quantitative analysis of PCR amplicons performed by LIF allowed normalizing the amplicon input in the sequencing reactions, improving the overall quality of sequence data. These quantitative data in combination with the quantification of genomic mtDNA by real-time PCR has been successfully used to evaluate the PCR efficiency and detection limit of full sequencing methods of different mtDNA targets. The quantification of amplicons also provided a method for the rapid evaluation of PCR efficiency of multiplex-PCR versus singleplex-PCR to amplify short HV1 amplicons (around 100 bp) from severely degraded ancient DNA samples. The combination of human-specific (Cyt b) and universal (16S rRNA) mtDNA primer sets in a single PCR reaction followed by MCE detection offers a very rapid and simple screening test to differentiate between human and nonhuman hair forensic samples. This method was also very efficient with degraded DNA templates from forensic hair and bone samples, because of its applicability to detect small amplicon sizes. Future possibilities of MCE in forensic DNA typing, including nuclear STRs and SNP profiling are suggested.     

Automated magnetic preparation of DNA templates for solid phase sequencing.

An integrated protocol for solid-phase DNA sequencing using a robotic work station is described involving magnetic separation of DNA and analysis of the sequencing product by electrophoresis with automated detection of the fluorescently labeled fragments. The method, which is based on magnetic beads in combination with streptavidin-biotin technology, can be used for sequencing both genomic and plasmid DNA. The DNA template is obtained by the polymerase chain reaction (PCR). Protocols to prepare five and ten immobilized samples is described, giving 10 and 20 single-stranded templates, respectively. The magnetic purification steps are performed in a microtiter plate and this allows for an integrated scheme involving a subsequent procedure for automated primer annealing and sequencing reactions. Here, the procedure is examplified by direct genomic sequencing of DNA in blood sample from a human immunodeficiency virus (HIV)-infected patient and a cloned human antibody DNA fragment using fluorescently labeled sequencing primers.     

An extrusion fluidic driving method for continuous-flow polymerase chain reaction on a microfluidic chip

A novel extrusion driving protocol was developed based on micro-fabricated polydimethylsiloxane (PDMS) pneumatic valves. High efficiency liquid transfer was performed by using entirely overlapping control channels and fluid channels. A 0.5-s time is sufficient for the transfer of 9 μL sample solution between two chambers in the microchip with a nitrogen pressure of 70 kPa. The driving method was used in a microfluidic polymerase chain reaction (PCR) system, and rapid cycling of the PCR mixture in a closed loop was achieved. The amplification of DNA was demonstrated via both three-stage and two-stage PCR thermal cycling on the microchips resulting in significant reduction of the PCR time. The amplifications of 144-bp and 200-bp DNA fragments were achieved within 24 min using a three-stage protocol with 30 thermal cycles, and 130-bp DNA fragments within 12 min by using 20 thermal cycles in the two-stage system, compared to about 2 h in benchtop PCR with the same number of thermal cycles.