Study on retention behavior of cyclic siloxanes by high resolution pyrolysis-gas chromatography with a fused silica capillary column

The general gas chromatographic retention behavior of cyclic methylsiloxanes partially substituted with phenyl or 2-cyanoethyl groups has been systematically studied, with pyrolysis-gas chromatography being utilized to form the cyclic siloxanes from the corresponding polysiloxanes at a temperature of 600°C. Kovats retention indices (KI) were determined for the cyclic siloxanes by use of the retention data of the pyrolyzates from polyethylene as standards. The effect of phenyl and 2-cyanoethyl substituents in the cyclic siloxanes on retention behavior has also been considered.     

Use of Retention Data as the First Step in the Identification of Cyclic Organic Peroxides in Temperature-Programmed Gas Chromatography

Temperature-programmed retention indices for eleven cyclic organic peroxides were determined by gas chromatography on slightly polar 5% biphenyl 95% dimethylpolysiloxane columns (DB-5 and Rtx-5MS) at three heating rates (5, 10, and 20° min⁻¹) from 60 to 300°C, using different chromatographs. Cyclic organic diperoxides and triperoxides had nearly constant retention indices when different heating rates and a short isothermal hold time (5 min) before the programmed increase in temperature were used. The usefulness of temperature-programmed retention indices was shown by using the data to predict the retention times and structures of unknown diperoxides or triperoxides derived from ketones. This is the first step in the identification of unknown cyclic organic peroxides, a process would otherwise require the availability of reference compounds. Revised: 7 and 17 November 2005     

Prediction of the net retention volumes in gas chromatography using porous polymers coated with different stationary phases

Summary A new expression which permits the prediction of the net retention volumes in gas chromatography with column packings of coated porous polymers is reported. The porous polymers Chromosorb 101 and Chromosorb 102 were used as supports and squalane, Ethofat and Carbowax 20M as stationary phases at three different column temperatures of 80°C, 100°C and 150°C. Several organic compounds of various polarity were used as test compounds and the net retention volumes, V_Ntheor, have been calculated according to this new expression. The V_Ntheor values were compared with the experimental net retention volumes, V_Nexp, and it was found that the difference between these two values is dependent on the type of compound and column packing. Nevertheless, the elution order could be predicted in most cases.     

The effect of the trifluoropropyl group in polysiloxane stationary phases used for capillary gas chromatography

Four poly(methyl 3,3,3-trifluoropropyl siloxanes) with trifluoro-propyl group content (group substitution) between 8 and 35 percent have been synthesized and characterized as stationary phases for gas chromatography in borosilicate glass capillary columns. Results are compared with those from two commercial stationary phases–a polydimethylsiloxane and a poly(methyl 3,3,3-trifluoropropyl siloxane) with a fifty percent trifluoropropyl group content (group substitution). Retention index values, McReynolds constants, polarity (as defined by McReynolds) and retention polarity (as defined by Takács) increase regularly with the trifluoropropyl group content of the stationary phase. The temperature coefficient of the retention indices of the McReynolds probes, and that of the polarities, have been determined at temperatures between 60 and 180 °C. Specific retention volumes do not follow the linear dependence on trifluoropropyl group content observed for retention indices or polarities. Substances with electron-donor groups show maximum retention for a trifluoropropyl group content of ca 30%, whereas the retention of hydrocarbons, halogenated compounds, and alcohols decreases as the degree of trifluoropropyl group substitution increases from 0 to 50%. It is felt that a polysiloxane with a trifluoropropyl group content of ca 30 to 35% would be the best choice for the separation of ketones, nitro compounds or amines.     

The Analysis of volatile compounds by purge and trap with whole column cryotrapping (WCC) on a fused silica capillary column

The purge and trap (P&T) method of analysis has been interfaced with fused silica capillary column gas chromatography. This interfacing has been accomplished without splitting the P&T trap desorption carrier gas. Thus, 100% of the purged compounds are transferred to the column. The analytes are cryofocussed on the column using whole column cryotrapping (WCC) at ?80°C. The resulting P&T/WCC procedure is extremely well-suited to the analysis of trace purgeable aqueous organic compounds. Samples and standards containing a variety of aromatic standard compounds were analyzed. The standards included benzene, toluene, ethylbenzene, xylenes, C₃-C₄-benzenes, and naphthalene, as well as three P&T internal standard compounds. Chromatographic peak widths were uniformly less than 6 s at the base and excellent precision was obtained in the relative retention time data for all compounds. The chromatogram of a groundwater sample contaminated with aromatic gasoline compounds is also presented. Since P&T/WCC works well with fused silica capillary columns, the full sensitivity and chromatographic efficiency of capillary gas chromatography is made available to P&T analyses.     

Comparative evaluation of retention of hydrocarbons present in the C5-petroleum fraction on methylsilicone and squalane phases

Summary The retention of hydrocarbons present in the C₅ pyrolysis fraction of gasolines on the stationary phases squalane and methylsilicone oil JXR at 30, 40 and 50°C was investigated by capillary gas chromatography. The unified retention indices of the hydrocarbons were also calculated on squalane. The retention indices obtained on these two phases were interrelated and the quantitative relationship with the structure of the solutes was studied. Equations based on the unified retention indices calculated on squalane and some selected structural elements of the solutes permit the calculation of their retention on methylsilicone with sufficient accuracy.     

System for calculating the linear temperature-programmed retention indices of polycyclic aromatic compounds

Theoretical procedures have been used to predict linear temperature-programmed retention indices for polycyclic aromatic compounds. It is possible to calculate such indices for polycyclic aromatic compounds in some practical situations in which the compounds cannot be eluted during a simple linear temperature program. The theory has been tested for a number of polycyclic aromatic hydrocarbon (PAHs) in single- and multi-plateau temperature-programmed gas chromatography with SE-52 as the stationary phase. This method will extend the applicability of linear retention indices for the identification of the isomers of polycyclic aromatic compounds.     

Live retention database for identification of compounds in capillary gas chromatographic analysis --Principle and structure

A live retention database for compound identification in isothermal and any step temperature programmed capillary gas chromatography has been developed. The database utilizes the Kovats retention indices of compounds on a given stationary phase and the retention time of n-alkanes measured at isothermal conditions on the column to be used, together with the programming parameters. Identification is performed by search operation that compares the calculated results with the retention values of unknown peaks. Cross-reference of the search results of different operating conditions is performed automatically by the database in order to increase the reliability of the identification. The error of the database conversion is ≤± 0.5 index unit, or ≤± 1% on retention time. This paper describes the principle and the structure of the database in detail. The experimental results for different calsses of compounds tested at divers operating conditions will be presented in Part Ⅱ.     

Liquid crystal stationary phases for gas chromatography and supercritical fluid chromatography

Novel monomeric and polymeric liquid crystalline compounds were synthesized as stationary phases for gas chromatography (GC) and supercritical fluid chromatography (SFC). Monomeric liquid crystalline compounds were used in packed column gas chromatography for the separation of isomeric aromatic compounds and insect sex pheromones. Liquid crystalline polymers possess long nematic ranges and a uniform coating was easily achieved in glass and fused silica capillaries, which could stand temperatures up to 250°C in GC and pressures of 200 MPa at 160°C in SFC. The columns provide excellent selectivity and resolution for fused ring aromatic compounds such as the isomers anthracene and phenanthrene or triphenylene and chrysene.     

Identification and the retention index of bilobalide and ginkgolides using capillary gas chromatography

Ginkgo biloba L. is known to contain the unique terpene trilactone compounds bilobalide and ginkgolides. Capillary gas chromatography is used for the quantitative identification of bilobalide and the main ginkgolides (ginkgolide A, B, and C). The retention indices of these compounds are also determined. Retention indices of bilobalide and ginkgolide A, B, and C substitute the use of their standards at their routine identification. Our procedure does not require temperature-programmed operation.     

气相色谱QSRR研究在质谱谱库检索定性中的应用

对质谱谱图相似的多取代烷基苯各位置异构体,根据一种从苯、单取代烷基苯及双取代烷基苯保留指数预测相关多取代烷基苯保留指数的方法,测定了基础化合物在OV－1毛细管柱上的保留指数,预测了相关多取代烷基苯在OV－1上的保留指数。利用该保留数据,结合质谱,给予了正确定性,从而解决了质谱谱库检索定性时对于各位置异构体难于定性的困难。     

Effect of Temperature on the Variation of Retention Time of Unretained Compound and Retention Indices of Some Explosives and Related Compounds Calculated Using a Multiparametric Method in RP-LC

In reversed phase liquid chromatography (RP-LC), a multiparametric non-linear least-squares regression iterative method has been evaluated at different column temperatures (ranging from 30 to 60 °C in 5 °C steps) for calculating the retention time of the unretained compound t _M and the regression parameter (slope b), based on the use of alkan-2-ones, alkyl aryl ketones and 1-nitroalkanes homologous series on two different columns: Spherisorb-ODS2 C₁₈ and Nucleosil C₈. The calculated parameters t _M and b by the multiparametric method (MP) were compared with those obtained by using the iterative method of Guardino’s. The influence of the number of subsets of homologues used for the calculation of t _M and b values was investigated. The retention indices (RI) of some neutral and acidic explosives and related compounds (nitramines, nitroaromatics, aminonitroaromatics and nitrophenols) based on the alkan-2-ones retention index standards have been determined and compared at various temperatures by the MP method. Good agreement was observed between retention data calculated by the MP and GU methods.     

Model for predicting comprehensive two-dimensional gas chromatography retention times

A model for approximating the relative retention of solutes in comprehensive two-dimensional gas chromatography (GCxGC) is presented. The model uses retention data from standard single-column temperature-programmed separations. The one-dimensional retention times are first converted into retention indices and then these indices are combined in a simple manner to generate a retention diagram. A retention diagram is an approximation of the two-dimensional chromatogram that has retention order and spacing in both dimensions similar to that found in the experimental chromatogram. If required, the retention diagram can be scaled to more closely resemble the two-dimensional chromatogram. The model has been tested by using retention time data from single-column gas chromatography-mass spectrometry and valve-based GCxGC. A total of 139 volatile organic compounds (VOCs) were examined. Approximately half of the VOCs had a single functional group and a linear alkyl chain (i.e., compounds with the structure Z-(CH(2))(n)-H). The retention diagrams had primary retention orders that were in excellent agreement with the GCxGC chromatograms. The relative secondary retention order for compounds with similar structures was also accurately predicted by the retention diagram. However, the relative secondary retention for compounds with dissimilar structures, such as acyclic alcohols and multi-substituted alkylbenzenes, were less accurately modeled. This study demonstrates how readily available single-column retention time data can be used to provide an a priori estimate of the relative retention of solutes in a GCxGC chromatogram. Such a capability is useful for screening possible combinations of stationary phases.     

连接性指数与Kov(a)ts指数的相关性研究

在分子拓扑理论的基础上,提出一种新的拓扑指数——连接性指数~mG,其中。计算了12个系列94种分子的~0G、~1G值,发现~0G或~1G与这些化合物的Kovts指数具有很好的相关性。该模式计算方法简单,使用方便,预测结果理想。     

Using Bezier curves for the calculation of retention indices of polycyclic aromatic hydrocarbons in the so-called Lee's scale in temperature-programmed gas chromatography with mass spectrometry detection

The retention indices of some polycyclic aromatic hydrocarbons (PAHs) separated by temperature-programmed gas chromatography are computed by smoothing reference data with Bezier curves of orders 6 are more consistent with the scheme of this retention parameter, and they present standard deviations systematically smaller than those associated with classical retention indices. The Bezier curve possesses the property of local control, (i.e., their graphs are modified only in the neighbourhood of the displaced point). The values thus obtained were compared with the corresponding ones calculated in a classical way. Detailed statistical analysis is presented to describe the retention indices of PAHs expressed in the so-called Lee's scale as a function of retention temperatures (in degrees C). As a training set, experimental retention data of PAHs obtained on a PE-5 phase is used for correlation. As prediction sets, literature experimental retention indices expressed in the so-called Lee's scale obtained on a DB-5 slightly polar stationary phase are applied for comparison. The method developed is successfully used for estimating and predicting the capillary gas chromatography retention index of PAHs.     

Appraisal of an Empirical Model for Simulation of Retention from Structure in Temperature-Programmed Gas Chromatography

The solvation parameter model and response surface methodology are evaluated for the prediction of retention in temperature-programmed gas chromatography. A large and varied group of compounds were separated at a constant flow rate on three columns of different selectivity (DB-1701, DB-210 and EC-Wax) with initial temperature in the range 60–120 °C and program rates of 1–15 °C min^?1. The solvation parameter model provides an acceptable fit to the experimental retention factors independent of column identity, initial temperature and program rate. The system coefficients of the solvation parameter model are shown to fit a second order program rate model of the form system coefficient = a_o + a₁ X + a₂ X ² where X is the program rate (°C min^?1) and a_o, a₁ and a₂ are fitting coefficients with no physical significance. Response surface methodology was used to derive empirical models to predict system coefficients with program rate and initial temperature as variables. These models explain the experimental data quite well but are local models that depend on the average properties of the solutes used for their derivation. Since they dependent on solute identity, these models are unsuitable for the general prediction of retention from structure, but may prove useful for estimating retention associated with variation in experimental variables for a defined group of compounds.     

Courbes de Bézier pour le calcul des indices de rétention en chromatographie gaz–liquide à température programmée

Bezier curves for the calculation of retention indices in temperature-programmed gas–liquid chromatography. Retention indices of eleven organochlorine species, separated by temperature-programmed gas chromatography, computed by smoothing reference data with Bezier curves of orders 7 and 10 are more consistent with the scheme of this retention parameter, and present standard deviations systematically smaller than those associated with classical retention indices. These results are reproduced when solutes are referred to even alternate n-alkanes. © 2000 Académie des sciences / Éditions scientifiques et médicales Elsevier SASgas chromatography / temperature programming / smoothing of reference data / independent of local properties function     

Verflüchtigung von Spaltproduktjod aus Festem UCl4

It is possible to volatilize about 95% (at temperatures between 200°C and 600°C) of the iodine, which has been produced by irradiating solid UCl₄ with thermal neutrons. The delay times for iodine are decreasing from 2 hrs (at 200°C) to 7 sec (at 600°C). The release of the iodine is improved by using an inert carrier gas. When adding AgCl to the UCl₄ before irradiation is carried out, the release of iodine is suppressed at temperatures lower than 400°C. The adding of KI leads to a more rapid release of iodine at low temperatures.      

Low‐temperature headspace‐trap gas chromatography with mass spectrometry for the determination of trace volatile compounds from the fruit of Lycium barbarum L.

The total saccharides content of Lycium barbarum L. is very high, and a high temperature would result in saccharide decomposition and the emergence of a large amount of water. Moreover, the volatile compounds from the fruit of L. barbarum L. are rather low in concentration. Hence, it is difficult for a conventional headspace method to study the volatile compounds from the fruit of L. barbarum L. Since headspace‐trap gas chromatography with mass spectrometry is an excellent method for trace analysis, a headspace‐trap gas chromatography with mass spectrometry method based on low‐temperature (30°C) enrichment and multiple headspace extraction was developed to explore the volatile compounds from the fruit of L. barbarum L. The headspace of the sample was extracted in 17 cycles at 30°C. Each time, the compounds extracted were concentrated in the trap (Tenax TA and Tenax GR, 1:1). Finally, all the volatile compounds were delivered into the gas chromatograph after thermal desorption. With the method described above, a total of 57 compounds were identified. The identification was completed by mass spectral search, retention index, and accurate mass measurement.