Extension of photonic band gaps in one-dimensional photonic crystals

A method is proposed for extending photonic band gaps by constructing periodic structures from two or more consecutively located photonic crystals with different lattice constants or filling factors. The photonic band gaps with a maximum extension are predicted by superposing the photonic band gap maps on one another. It is demonstrated that both the lowest and higher order band gaps can be merged in photonic crystals with a high refractive index contrast.     

Rhombohedral photonic crystals by triple-exposure interference lithography: Complete photonic band gap

The band structure of 3D photonic crystal that could be synthesized by means of interference lithography with triple-exposure two-beam interference technique has been investigated. As a result of the geometry optimization the optimal conditions for maximal band gaps with different refractive index contrast have been obtained. The refractive index threshold for gap opening equaled to 2.14 has been predicted for this method of photonic crystals synthesis. This value is close to the refractive index thresholds of the best known structures. The continuous transition between simple cubic, face centered cubic and bulk centered cubic symmetries has been considered.     

全息制作不同晶面取向光子晶体模板

用单向光入射和单次曝光的激光全息技术制作了类金刚石结构, 此类金刚石结构有宽完全带隙和低介质折射率要求等优点. 在同一种光束配置下，引入恰当的匹配棱镜，用激光全息技术制作了大面积的类金刚石光学晶格不同晶面取向的亚微米周期结构. 满足如负折射效应等研究中所需的特殊晶面取向要求. 关键词： 激光全息技术 光学晶格 光子晶体     

介质柱型二维Triangular格子光子晶体的禁带特性

采用平面波展开法数值计算了空气背景中由圆形、正六边形和正方形介质柱构造的二维三角晶格光子晶体禁带结构,并研究了介质方柱旋转角度、介质折射率和填充比对完全光子禁带宽度的影响.结果表明,在低频区,介质方柱旋转17°时,出现最大完全光子禁带,且最大禁带宽度随介质折射率的变化较为稳定.在高频区,介质方柱旋转30°时,完全光子禁带宽度最大;且介质材料折射率n=2.2时即出现完全光子禁带,n=2.6时,完全光子禁带达到最大.     

Band gap structure of disordered chiral photonic crystals

Based on the non-symmetric transmission-line method, the band gap structure of disordered chiral photonic crystals (CPC) has been investigated. The influence of the chiral parameters, the disorder, the periods and the refractive index on the band gap structure has been discussed. It is found that the photonic band gap (PBG) in CPC is more obvious than that in the conventional photonic crystals, and the PBG can be increased by increasing the periods or the contrast of the refractive index of the two media. It is also found that the existence of disorder will influence the band edge of the PBG, and such influence will increase with the increment of periods or the contrast of the refractive index of the two media.     

一维函数光子晶体的研究

本文提出一种新型函数光子晶体, 其折射率是空间位置函数. 由费马原理, 我们给出光在一维、 二维和三维函数光子晶体中的运动方程, 以及一维函数光子晶体的色散关系、 带隙结构和透射率, 再利用传输矩阵理论研究函数光子晶体周期数、 入射角和介质层的厚度等对透射率和禁带结构的影响, 计算发现通过选择不同的折射率空间分布函数, 可以得到比传统光子晶体更宽或更窄的禁带结构. 这样为我们设计不同带隙结构的光子晶体提供理论依据.     

光折变材料的带隙结构研究

利用光子晶体的概念和时域有限差分方法计算了当光折变材料的空间折射率呈一维正弦变化时其内部的带隙结构情况,表明在光折变材料中存在极窄的光子带隙。最后讨论了折射率(n)、折射率调制幅度(△n)、周期长度(D)及周期数(N)对光子带隙的影响。     

Photonic crystals and microlasers fabricated with low refractive index material

Although the investigation on photonic band gap materials has been done more than two decades, it is still a big challenge to fabricate three-dimensional photonic crystal (PC) possessing wide band gaps in visible range. In this article, we have reviewed recent progresses on fabricating the PC with low refractive index material in visible range. In contrast to the material with large refractive index, it is cheap to use low refractive index material in fabricating the PC and will be greatly beneficial for future industrial productions. The holographic method to fabricate such a PC has been introduced, applying it to the design of the microlaser has also been discussed.     

Photonic crystals and microlasers fabricated with low refractive index material

Although the investigation on photonic band gap materials has been done more than two decades, it is still a big challenge to fabricate three-dimensional photonic crystal (PC) possessing wide band gaps in visible range. In this article, we have reviewed recent progresses on fabricating the PC with low refractive index material in visible range. In contrast to the material with large refractive index, it is cheap to use low refractive index material in fabricating the PC and will be greatly beneficial for future industrial productions. The holographic method to fabricate such a PC has been introduced, applying it to the design of the microlaser has also been discussed.     

介质折射率对一维三元光子晶体带隙的影响

利用光学传输矩阵法,数值模拟了一维二元、三元光子晶体的带隙结构,得出:三元光子晶体的主带隙略宽于二元光子晶体的主带隙;三元光子晶体的主带隙主要取决于最高折射率的介质和最低折射率的介质,而与居于两者之间的介质关系不大,并作出了相应的关系曲线。最后推导了三元光子晶体的色散关系。     

二氧化硅胶体球自组装光子晶体的研究

光子晶体由于具有光子带隙和光子局域等一系列优异的光学特性而受到了人们广泛的关注。由于采用胶体颗粒自组装法制备光子晶体制备工艺简单,所需要的费用也较低,因此已成为制备可见光至红外波段三维光子晶体的一种简便有效的方法。采用垂直沉积法制得了三维光子晶体薄膜,并用扫描电子显微镜和紫外-可见光-近红外分光光度计对其显微结构和光学特性进行了详细的研究。结果表明,自组装薄膜在三维方向上都具有有序结构,其密排面平行于载波片的表面。制备的光子晶体薄膜具有明显的光子带隙特性,带隙中心波长为956nm。研究了带隙中心波长同入射线与密排面法线夹角之间的变化关系,其结果与理论值吻合得很好。     

Photonic band gaps in one-dimensionally ordered cold atomic vapors

We experimentally investigate the Bragg reflection of light at one-dimensionally ordered atomic structures by using cold atoms trapped in a laser standing wave. By a fine-tuning of the periodicity, we reach the regime of multiple reflection due to the refractive index contrast between layers, yielding an unprecedented high reflectance efficiency of 80%. This result is explained by the occurrence of a photonic band gap in such systems, in accordance with previous predictions.     

基于光纤的三维可调胶体光子晶体

用改进的垂直沉积法在光纤端面制备了高质量的SiO₂胶体光子晶体,经过烧结、固化构成胶体光子晶体-光纤结构. 用扫描电子显微镜确定了样品为面心立方密排结构,其密排面平行于光纤基底表面. 利用全光纤传感网络测试了该胶体光子晶体,反射峰中心位于845 nm处,与Bragg理论计算值符合很好. 将该样品浸入不同折射率的液体中,反射光谱的峰值位置随着液体折射率的改变而发生偏移,近似呈线性关系,实现了峰位可调. 对于不同浓度引起的液体折射率的变化,基于光纤的胶体光子晶体结构也能够很好地分辨出来. 关键词： 可调胶体光子晶体 2微球')" href="#">SiO₂微球 Bragg反射 光纤     

Photonic band gap of one-dimensional periodic structure containing dispersive left-handed metamaterials

Band structures of one-dimensional(1D)photonic crystals(PCs)containing dispersive left-handed metamaterials are studied theoretically.The results show that the structure possesses a type of photonic band gap originating from total internal reflection(TIR).In contrast to photonic band gaps corresponding to zero average refractive index and zero phase.the TIR gap exhibits sharp angular effect and has no polarization effect.It should also be noted that band structures of transverse electric(TE) and transverse magnetic(TM) mode waves are exactly the same in the PCs we studied.     

Numerical analysis of a temperature sensor based on the photonic band gap effect in a photonic crystal fiber

In this paper we investigate, by the plane wave expansion method and an analytical model, the temperature effect on the photonic band gap fiber, and we report on a numerical demonstration of a temperature sensor based on the photonic band gap (PBG) shift in a solid core photonic crystal fiber (PCF) infiltrated with a high refractive index oil. The bandwidth and the position of the central wavelength of the band gap are the parameters of interests for our temperature sensing purpose. Simulation results were found to be in excellent agreement with the refractive index scaling law and the highest sensitivity of 3.21?nm/°C was achieved, and it will be even higher than the grating based sensors written in PCFs with similar structure.     

含左手材料异质结构光子晶体的零平均折射率带隙的展宽

运用光学传输矩阵理论,研究了含左手材料一维二元光子晶体的禁带特性.提出了含左手材料的光子晶体异质结构中零平均折射率带隙展宽的方法.根据此方法设计的异质结构的光子晶体形成的零平均折射率带隙,与一维光子晶体零平均折射率带隙相比,零平均折射率带隙的宽度和相对带隙宽度可以得到显著的拓宽.而且它的零平均折射率带隙的边缘与TM波和TE波相关.这种特性在微型谐振腔、天线基片、同轴波导等方面都具有潜在的应用.     

Synthesis and Band Gap Control in Three-Dimensional Polystyrene Opal Photonic Crystals

High-quality three-dimensional polystyrene opal photonic crystals are fabricated by vertical deposition method. The transmission properties with different incident angles and different composite refractive index contrasts are experimentally and theoretically studied. Good agreement between the experiment and theory is achieved. We find that with the increasing incident angle, the gap position shifts to the short wavelength (blue shift) and the gap becomes shallower; and with the increase of refractive index of the opal void materials and decrease the contrast of refractive index, the gap position shifts to the long wavelength (red shift). At the same time, we observe the swelling effects when the sample is immerged in the solutions with different refractive indices, which make the microsphere diameter in solution become larger than that in air. The understanding of band gap shift behaviour may be helpful in designing optical sensors and tunable photonic crystal ultrafast optical switches.     

由球形原子构成的多种周期性介电结构的光子能带计算

采用矢量平面波方法计算了由球形空气原子构成的体心立方结构和六角密堆结构的光子能带，两种结构下都看到了贯通整个布里渊区的禁带。本文预言周期性介电结构的最大折射率调制度和最大禁带宽度对应于同样的原子体积分数，而且这个最佳的原子体积分数是结构无关的。文中还计算了由各向异性介电小球构成的面心立方结构的光子能带并看到了禁带，这与各向同性介电小球构成的面心立方结构很不相同。     

光子晶体中基于有效折射率接近零的光束准直出射

利用平面波展开法(PWM)和时域有限差分法(FDTD)研究了二维正方格子光子晶体靠近禁带边沿附近频率光波的传输特性.研究发现,若有效折射率接近于零,可出现光束从晶体表面准直出射的现象,且光束的出射方向只与晶体表面的取向有关,而与晶格取向无关.这种现象与自准直现象有很大不同.     

含负折射率材料的一维光子晶体的光学传输特性

采用光学传输矩阵方法,模拟研究了由正折射率材料和负折射率材料交替组成的一维光子晶体的光学传输特性.计算了这种含负折射率材料的一维光子晶体的透射谱和色散关系.结果表明,在正入射时,含负折射率材料的光子晶体的带隙要比传统的光子晶体要大得多,并具有狭窄的透射带,从光学薄膜理论的色散关系出发解释了形成上述现象的原因.讨论了在不同的偏振模式下,光以中心波长入射时,反射率随着入射角度的变化关系.发现含负折射率材料的一维光子晶体具有更好的角度特性,可以用来实现对中心波长的全方位反射.