羰基化合物结构参数与其 13C NMR谱化学位移的关系

通过对62个羰基化合物中羰基^13C NMR谱化学位移与其部分结构参数关系研究,发现羰基^13C NMR谱化学位移与烷基极化效应指数(PEI)、部分电荷(qx)的关系可用下式表示：δ=a b∑PEI c∑qx 该式能比现有文献方法较好地表达羰基^13C NMR谱化学位移值随结构变化的规律,从而对解析^13C NMR谱及预测羰基^13C NMR谱的化学位移值提供了理论依据。     

苯并咪唑萘酰亚胺类化合物的合成与结构确证

本文合成并分离提纯了1位和4位单取代的苯并咪唑萘酰亚胺(NBI)类化合物1~4,对化合物1的紫外-可见光谱、红外光谱、质谱、核磁共振谱(包括1H NMR、13C NMR、DEPT、1H-13C HSQC、1H-13C HMBC、1H-1HCOSY多种NMR技术)进行了详细解析,对其所有的1H和13C NMR信号进行了归属,并使用了GIAO和CSGT两种方法量化计算核磁位移,通过多种波谱学技术确证了化合物的结构。     

脂肪胺聚氧乙基醚结构的核磁共振波谱表征

从工业和合成产品脂肪胺聚氧乙基醚中用TLC和快速色谱(FC)分离精制得到6个脂肪胺聚氧乙基醚模型化合物，用^1H、^13C、gCOSY，gHSQC和gHMBC等核磁共振波谱和质谱表征了其结构，完成了^1H和^13C NMR谱带的归属，为本系列化合物的结构和EO分布鉴定提供了依据，并给出了计算本系列化合物叔胺值的方法。考察了酸性条件对脂肪胺聚氧乙基醚化合物相关基团化学位移的影响。     

辛伐他汀的波谱学数据和结构确证

对辛伐他汀的红外(IR)、紫外(UV)、质谱(MS)、氢-氢相关谱(^1H-^1HCOSY)、碳谱(^13C NMR,DEPT)、碳氢相关谱(HMQC)、碳氢远程相关谱(HMBC)予以解析并进行了报道,对所有的^1H NMR和^13C NMR谱信号进行了归属;讨论了红外特征吸收峰所对应的官能团的振动形式,并且对样品进行热差和热重分析,显示该样品为单一晶型,不含结晶水。     

取代芳基吡唑和取代芳基异E唑结构的核磁共振波谱表征

用^1H,^13C NMR和多种二维磁共振谱表征了本系列化合物的结构，完成了^1H和^13C NMR谱带的归属，测定了氟原子对各质子和碳原子的偶合常数，探讨了影响偶合常数大小的因素。     

四氟菊酯的核磁共振法分析

采用^1HNMR、^13C NMR、无畸变增强极化转移实验(DEPT)、^1H—^1H相关谱(COSY)、^1H检测异核多量子相关谱(HMQC)、^1H检测的异核多键相关谱(HMBC)等方法，对四氟菊酯的^1H和^13C NMR谱信号进行了归属；并用奥氏核效应(NOE)差谱法确定了该化合物的立体结构，为其结构鉴定和生产过程中的质量控制提供了重要依据。     

臭灵丹化学成分研究II

从臭灵丹(LaggeraPterodonta(DC)Benth)地上部分水煎浓缩液的氯仿提取液中,分离出四个化合物(1-4),1和2为倍半萜化合物,3和4为黄酮化合物,经紫外光谱、红外光谱、核磁共振^1H谱、^1^3C谱、^1H-^1Hcosy谱及质谱测定,分别为臭灵丹酮酸、冬青酸、洋艾素和金腰素乙。化合物1具有桉烷型倍半萜结构,为Δ^4^,^1^1-桉双烯-3-酮-13-酸,它是一新化合物。     

臭灵丹化学成分研究II

从臭灵丹(LaggeraPterodonta(DC)Benth)地上部分水煎浓缩液的氯仿提取液中,分离出四个化合物(1-4),1和2为倍半萜化合物,3和4为黄酮化合物,经紫外光谱、红外光谱、核磁共振^1H谱、^1^3C谱、^1H-^1Hcosy谱及质谱测定,分别为臭灵丹酮酸、冬青酸、洋艾素和金腰素乙。化合物1具有桉烷型倍半萜结构,为Δ^4^,^1^1-桉双烯-3-酮-13-酸,它是一新化合物。     

咪喹莫特的波谱学数据与结构表征

对咪喹莫特的红外(IR)、紫外(UV)、质谱(MS)、氢-氢相关谱(^1H--^1H COSY)、碳氢相关谱(HMQC)、碳氢远程相关谱(HMBC)予以解析并进行了报道。对所有的^1H NMR、^13C NMR谱的信号进行了归属；讨论了质谱的主要碎片离子的可能的裂解方式和红外特征吸收峰所对应的官能团的振动形式。     

二醋酸纤维素 -聚乙二醇接枝共聚物的核磁共振表征

用^1H NMR和^13C NMR核磁共振技术研究了二醋酸纤维素和聚乙二醇的接枝反应,并确定了^1H NMR和^13C NMR谱中各谱峰的归属,为证明二醋酸纤维素和聚乙二醇的接枝反应提供了依据。     

二氧化碳和丙烯直接合成甲基丙烯酸的NiPMo/TiO2催化剂的研究

用溶胶-凝胶法以磷钼酸(MPA)的镍盐溶液水解钛酸四丁酯制备了NiPMo/TiO2催化剂.使用ICP、 XRD、 TG-DTA、 IR、 TPD-MS和微反应技术研究了催化剂的化学组成、热稳定性、化学吸附性质和催化反应性能.杂多钼酸盐与TiO2通过O2-在TiO2表面发生了键合.在623 K下,杂多阴离子仍保持原有的Keggin结构.CO2在Lewis酸位Ni(Ⅱ)和Lewis碱位Ni-O-Mo的桥氧协同作用下生成CO2卧式吸附态Ni(Ⅱ)←O-(CO)←(O--Ni).丙烯有多种吸附态在催化剂上吸附.在563 K、 1 MPa和空速1500 h-1的反应条件下,丙烯的摩尔转化率为3.2%,产物MAA选择性为95%.     

Synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives

Different approaches for the synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives from simple amino acids have been investigated. A library of 33 precursors for the preparation of N-hydroxy pyrazinones was obtained in moderate to good yields.     

α-Amino acid derived enaminones and their application in the synthesis of N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates and other heterocycles

A new and simple synthesis of novel N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates, which exist in equilibrium with their 4-oxo tautomers, has been developed in two steps starting from N-protected α-amino acids. The key intermediates are enaminones, which can also be isolated, characterized, and used for the construction of other functionalized heterocycles, before they spontaneously decompose to pyrrole products. 4-Hydroxypyrroles are prone to partial aerial oxidation but can be efficiently alkylated or reduced to stable polysubstituted pyrrolidine derivatives.     

Specific intramolecular aromatic CH insertion of diazosulfonamides

The chemoselectivity in the intramolecular CH insertion of various diazosulfonamides has been experimentally studied. The results reveal that the aliphatic 1,4-, 1,5-, or 1,6-C(sp³)?H insertions of diazosulfonamides are not accessible, while the aromatic 1,5-C(sp²)?H insertion can be realized specifically by adjusting the diazo-adjacent group. In addition, the general chemoselectivities in the intramolecular CH insertions of diazosulfonyl compounds are summarized. Generally, diazosulfones undergo both aromatic 1,5-C(sp²)?H and aliphatic 1,5- and 1,6-C(sp³)?H insertions, while diazosulfonates undergo aliphatic 1,5- and 1,6-C(sp³)?H insertions. However, diazosulfonamides only undergo aromatic 1,5-C(sp²)?H insertion.     

A general and convenient synthesis of 4-(tosylmethyl)semicarbazones and their use in amidoalkylation of hydrogen,heteroatom, and carbon nucleophiles

A general synthesis of previously unknown semicarbazone-based α-amidoalkylating reagents, 4-(tosylmethyl)semicarbazones, has been developed. The synthesis involved three-component condensation of semicarbazones of aliphatic or aromatic aldehydes with the same or other aldehydes and p-toluenesulfinic acid. The scope and limitations of this reaction were investigated. The compounds obtained were demonstrated to be an efficient α-(4-semicarbazono)alkylating agents. They were reacted with H- (sodium borohydride), O- (sodium methylate), S- (sodium phenylthiolate), N- (pyrrolidine, sodium succinimide), P- (trialkyl phosphites), and C-nucleophiles (sodium diethyl malonate) to give the corresponding products of the tosyl group substitution, 4-substituted semicarbazones, including analogues of nitrofurazone. Among the prepared compounds tested in vitro for antibacterial and antifungal activity, three nitrofuryl-containing semicarbazones exhibited high biological activities with minimum inhibitory concentration (MIC) values of 8–32 μg/mL.     

Synthesis of novel chiral bidentate hydroxyalkyl-N-heterocyclic carbene ligands and their application in palladium-catalyzed Mizoroki–Heck couplings and asymmetric addition of diethylzinc to benzaldehyde

A small library of new chiral bidentate hydroxyalkyl-imidazolium salts 1 is conveniently synthesized on multi-gram scale from inexpensive and commercially available chiral pool amino acids. The corresponding carbenes, generated by deprotonation of imidazolium salts 1, in combination with palladium(II) chloride were tested in the Mizoroki–Heck coupling reaction. The most significant results in terms of yields and reactivities were achieved with low catalyst loading. The catalytic activities of these imidazolium salts were also investigated in the asymmetric addition of diethylzinc to benzaldehyde. The use of MgO nanoparticles as an additive in conjunction with these ligands played a crucial role in increasing the efficiency of these reactions.     

N-Heterocyclic carbene-palladacyclic complexes: synthesis,characterization and their applications in the C-N coupling and α-arylation of ketones using aryl chlorides

N-Heterocyclic carbene-palladacyclic complexes 3 were successfully achieved in a one-pot procedure under mild conditions. The structure of 3a was unambiguously confirmed by X-ray single crystal diffraction and it was an active catalyst in the Buchwald-Hartwig amination and α-arylation of ketones even at very low catalyst loadings (0.01?mol%).     

Toward new camptothecins. Part 6: Synthesis of crucial ketones and their use in Friedländer reaction

In the context of the preparation of camptothecin and luotonin A analogs, the synthesis of some key keto-precursors and their use in Friedländer condensation are described. This paper also focuses on the stability of these keto intermediates and emphasizes the major differences between indolizinones and pyrroloquinazolinones series. Noteworthy is also the report of some original structures isolated as by-products of some experiments.     

Iodine-mediated oxidative Pictet-Spengler reaction using terminal alkyne as the 2-oxoaldehyde surrogate for the synthesis of 1-aroyl-β-carbolines and fused-nitrogen heterocycles

An efficient iodine-mediated oxidative Pictet-Spengler reaction in dimethyl sulphoxide (DMSO) using terminal alkynes as the 2-oxoaldehyde surrogate for the synthesis of aryl (9H-pyrido[3,4-b]indol-1-yl)methanones is described. The scope of the protocol includes the total synthesis of Fascaplysin, Eudistomins Y₁ and Y₂. The methodology is extended for preparing pyrrolo[1,2-a]-quinoxaline and indolo[1,5-a]quinoxaline derivatives. The utility of 1-aroyl-β-carbolines was demonstrated by performing palladium-catalyzed β-carboline directed ortho-C(sp2)-H functionalization of the phenyl ring with thiomethyl (SMe) group using DMSO as source and for accessing 4-aryl-canthin-6-ones.     

Facile synthesis of bicyclic 1-arylpyrazol-5-ones

In this Letter, we described a facile method for constructing fused bicyclic 1-arylpyrazol-5-one ring system. We employed various methylene-containing carboxylic acids as the substrates and proved that the pyrazolone ring closure requires activated methylene group in intermediate II. Accordingly, a series of structurally diversified, fused bicyclic 1-arylpyrazol-5-ones was prepared in moderate to high yields using the requisite substrates.