Thermodynamic properties of some ionic liquids using a simple equation of state

In this work, we have used a simple equation of state (EoS) to predict the density and other thermodynamic properties such as isobaric expansion coefficient, α_P , isothermal compressibility, κ_T, and internal pressure, P_i, for nine ionic liquids including trihexyl (tetradecyl) phosphonium chloride ([(C₆H₁₃)₃P(C₁₄H₂₉)][Cl]), trihexyl (tetradecyl) phosphonium acetate ([(C₆H₁₃)₃P(C₁₄H₂₉)][Ac]), trihexyl (tetradecyl) phosphonium bis {(trifluoromethyl) sulfonyl} amide ([(C₆H₁₃)₃P(C₁₄H₂₉)][NTf₂]), 1-butyl-3-methylimidazolium bis {(trifluoromethyl) sulfonyl} amide ([bmim][NTf₂]), 1-hexyl-3-methylimidazolium bis {(trifluoromethyl) sulfonyl} amide ([hmim][NTf₂]), 1-butyl-3-methylimidazolium tetrafluoroborate ([bmim][BF₄]), 1-butyl-3-octylimidazolium tetrafluoroborate ([omim][BF₄]), 1-butyl-3-octylimidazolium hexafluorophosphate ([omim][PF₆]), and 1-butyl-3-methylimidazolium hexafluorophosphate ([bmim][PF₆]) at different temperatures and pressures. A wide comparison with experimental and literature data has been made. The results show that this EoS can be used to reproduce and predict different thermodynamic properties of ionic liquids within experimental errors.     

Correlation of volumetric properties of binary mixtures of some ionic liquids with alcohols using equation of state

In our previous paper, we extended the Tao and Mason equation of state (TM EOS) to pure ionic liquids. Here we apply TM EOS based on statistical?Cmechanical perturbation theory to binary mixtures of ionic liquids. Three temperature-dependent quantities are needed to use the equation of state: the second virial coefficient, B ₂, effective van der Waals co-volume, b, and a scaling factor, ??. The second virial coefficients are calculated from a correlation that uses the normal boiling temperature and normal boiling density. ?? and b can also be calculated from the second virial coefficient by scaling. In this procedure, the number of input parameters, for calculation of B ₂, ??, and b reduced from 5 (i.e., critical temperature, critical pressure, acetric factor, Boyle temperature T _B, and the Boyle volume ?? _B) to 2 (i.e., T _bp and ?? _bp). At close inspection of the deviations given in this work, the TM EOS predicts the densities with a mean AAD of 1.69%. The density of selected system obtained from the TM EOS has been compared with those calculated from perturbed-hard-sphere equation of state. Our results are in favor of the preference of the TM EOS over another equation of state. The overall average absolute deviation for 428 data points that calculated by perturbed-hard-sphere equation of state is 2.60%.     

Excess molar volumes and isentropic compressibilities of binary liquid mixtures containing n-alkanes at 298.15 K

Excess molar volumes (V ^E) and deviation in isentropic compressibilities (Δβ _s) have been investigated from the density ρ and speed of sound u measurements of six binary liquid mixtures containing n-alkanes over the entire range of composition at 298.15 K. Excess molar volume exhibits inversion in sign in one binary mixture, i.e., n-heptane + n-hexane. Remaining five binary mixtures, n-heptane + toluene, cyclohexane + n-heptane, cyclohexane + n-hexane, toluene + n-hexane and n-decane + n-hexane show negative excess molar volumes over the whole composition range. However, the large negative values of excess molar volume becomes domainant in toluene + n-hexane mixture. Deviation in isentropic compressibility is negative over the whole range of composition in the case of all the six binary mixtures. Existence of specific intermolecular interactions in the mixtures has been analyzed in terms of excess molar volume and deviation in isentropic compressibility.     

Ultrasound-assisted of alkali chloride separation using bulk ionic liquid membrane

An ultrasonic-assisted separation of alkali chloride (LiCl, NaCl, and KCl) salts have been carried out using of an hydrophobic ionic liquid membrane (ILM). The ionic liquid 1-butyl-3-methylimidazolium hexafluorophosphate and tributyl phosphate mixture have been used as ILM. An ultrasonic probe with different frequencies (25, 100, and 250) kHz have been applied as source of ultrasound generator with different times of sonication (2, 5, and 10) min in three phases system containing feed, ILM, and receiver in osmotic U-shaped tube. Also, 250, 500, and 1000 ppm of the feed (alkali chloride) concentration have been used to separate. The frequency of 250 kHz with higher sonication time provides optimum condition for separation of LiCl with lower feed concentration. The thermodynamic properties such as density and speed of sound and the related thermodynamic properties have been calculated to optimize ILM composition (x_IL = 0.45) for ultrasound-separation.     

Thermophysical properties of ionic liquids and their mixtures from a new equation of state

In our previous work, a perturbed hard-trimer-sphere equation of state (PHTS EOS) was developed for modeling the phase equilibria of pure ionic liquids (ILs) (M.M. Alavianmehr et al., Ionics 22 (2016) 2447–2459). In this work, we have successfully extended the model to the mixtures of IL + IL and IL + solvent. Two temperature-dependent parameters appearing in the EOS are correlated with two microscopic scaling constants σ, the effective hard-sphere diameter, and ε, the non-bonded interaction energy. The overall average absolute deviation (AAD) of the estimated densities from the literature data using the proposed model with and without non-additivity parameter (λ _ij) was found to be 0.44 and 0.79%, respectively. A modified Enskog equation and rough hard-sphere (RHS) theory are combined with our proposed equation of state to calculate the viscosity coefficient of ionic liquids and their mixtures. Finally, from the results obtained, a linear relation between logarithm of surface tension and viscosity property of ionic liquid was developed.     

Modelling interfacial properties of ionic liquids with ePC-SAFT combined with density gradient theory

Highlights

• Combination of ePC-SAFT with density gradient theory

• Calculation of interfacial properties of pure ILs in broad temperature range

• Quantitative predictions of surface tensions for ILs not used in κ parameter fitting

     

The Hugoniot equation of state of the fluid He+D2 mixtures

The fluid variational theory and effective one-component model have been used to calculate the Hugoniot equation of state (EOS) of fluid He, D2, and He+D2 mixtures with different He:D2 compositions under high pressures and temperatures. An examination of the confidence of above computation is performed by comparing experiment and calculation, in which the similar calculation procedure used for He+D2 is adopted, of He and D2 each, since no experimental data are available to conduct this kind of comparison. Good agreement in both comparisons is found. This fact may be looked as if an indirect positive verification of calculation procedure used here at least in the pressure and temperature domain covered by the experimental data of He and D2 used for comparison, numerically nearly up to 35 GPa and 105K.     

Modelling the phase equilibria of multicomponent mixtures containing CO2, alkanes,water, and/or alcohols using the quadrupolar CPA equation of state

ABSTRACT

In this work, a quadrupolar cubic plus association (qCPA) equation of state is evaluated for its ability to predict the phase equilibria of multicomponent mixtures containing CO₂ and alkanes, alcohols, and/or water. A single binary interaction parameter is employed in qCPA for all binary combinations. All parameters are based solely on pure fluid or binary mixture data and multicomponent data are used only to evaluate the predictions. The performance of qCPA is, for all mixtures, compared to CPA where CO₂ is considered to be either non-associating (inert), solvating or self-associating. In the latter two approaches, an additional adjustable parameter is employed for binary pairs of CO₂ and an associating compound. The results show that the predictions with qCPA are very similar to the best performing CPA approaches, even though the model uses fewer adjustable binary parameters. The predictions with qCPA and the best CPA approaches are typically satisfactory and predict the general behaviour of the systems. As expected, qCPA and CPA with solvation or association typically performs better than inert CPA for two- and three phase vapour–liquid and vapour–liquid–liquid equilibria. However, inert CPA yields the best results of all the models for the prediction of dew point pressures.     

Effect of monocationic ionic liquids as electrolyte additives on the electrochemical and thermal properties of Li-ion batteries

The conventional electrolyte system has been compared with the ionic liquid (IL) additive containing electrolyte system at room temperature as well as elevated temperature. In this work, two types of monocationic ILs such as 1-butyl-3-methylpyrrolidinium hexafluorophosphate (Pyr IL) and 1-ethyl-3-methylimidazolium hexafluorophosphate (IMI IL) are added as an additive at two different weight ratios in 1.15 M LiPF₆ (EC/EMC = 3/7 v/v) electrolyte solution, the structural, electrochemical and thermal characteristics of LiNi_0.80Co_0.15Al_0.05O₂ (NCA)/carbon full-cell in different electrolyte formulations have been reconnoitered. X-ray diffraction (XRD) studies have proved that IL as an electrolyte additive does not alter the structural stability of cathode materials after cycling. Under room temperature, Pyr IL additives at 1 wt% and 3 wt% deliver better cycleability than others, with the retention ratios of 93.62% and 92.8%, respectively. At elevated temperature, only 1 wt% Pyr IL additive is giving stable capacity retention ratio of 80.74%. Ionic conductivity and self-extinguishing time (SET) values are increasing with respect to the amount of additive added to the electrolyte. Thermal studies reveal that 3 wt% Pyr IL is favorable regarding the safety of the battery as it shows shifting of peak to higher temperature of 272.10 °C. Among the IL additives evaluated in this study, addition of 1 wt% Pyr IL is the most desirable additive for achieving the best cycling performance as well as thermal behavior of Li-ion batteries.     

A solution of the multiple-binding mean spherical approximation for ionic mixtures

The mean spherical approximation (MSA) for an arbitrary mixture of charged hard spheres with saturating bonds is solved in the Wertheim formalism. Any number of bonds is allowed. It is shown that the general solution is given in terms of a screening MSA-like parameter ^T , a cross-interaction parameter that will depend on the binding association equations, the set of binding association fractions, and an additional algebraic equation. The equation for ^T is given for the general case. The equation for , however, depends strongly on the particular closure that is used to compute the contact pair correlation function. The full solution requires, as in the dimer case recently solved by Blum and Bernard, solvingm+2 equations and additionally the inversion of a matrix of size [(–1)m] for a system withm components and bonds. We recall that when =1, only dimers are allowed; for =2, only linear chains are formed: and when 3, branching of the polymers occurs. It can be shown that the excess entropy for the polymer case is as before,S ^MSA=( ^T )³/3 + sticky terms, where the sticky terms depend on the model and will be given in future work.     

Physicochemical properties of ionic liquids based on imidazolium/pyrrolidinium cations and maleate/phthalate anions

Ionic liquids (ILs) based on imidazolium/pyrrolidinium cations and maleate/phthalate anions can be used as excellent electrolyte materials for electrolytic capacitors. In this study, we synthesized four ILs of this family and investigated their thermal behaviors, ionic conductivities and sparking voltages. The four ILs have high thermal stability for capacitor requirements. The conductivities of imidazolium ILs are slightly higher than those of pyrrolidinium analogs and the conductivities of maleate anion-based ILs are higher than those of corresponding phthalate anion-based ILs. Besides, the long-term thermal stability of imidazolium ILs in conductivity is superior to that of pyrrolidinium analogs. Whereas the long-term thermal stability of phthalate anion-based ILs is better than that of corresponding maleate anion-based ILs. The influence of cationic structure of the ILs on conductivity was analyzed. The temperature dependence of conductivity was also discussed in this work. The Vogel–Tammann–Fulcher (VTF) equation accurately describes the temperature dependence of conductivity for the ILs. In addition, the result of sparking voltage measurement shows that neither Ikonopisov nor Albella model is valid for the ILs.     

Synthesis of ZnO nanostructures with controlled morphology and size in ionic liquids

Nanostructured ZnO has been synthesized by a hydrothermal route, using different ionic liquids (ILs) as the morphology templates. The morphology of ZnO changes from rod-like to star-like and flower-like in different ILs. A 3D nano/micro structure ZnO with unique flower-like morphology has been synthesized via the assembly of dicationic IL and [Zn(OH)₄]²⁻. The flower-like pattern was obtained in the presence of IL 1. The flower-like ZnO structure has a hexagonal prism, with a hexagonal pyramid on the tip, and diameter of ~444 nm. While the ZnO prepared in IL 2, shows uniform rod-like shape with a diameter of 91 nm, star-like morphology consisting of nanorods with diameter of ~109 nm was formed in IL 3. The XRD, SEM, and PL spectra have been employed for characterization of the synthesized ZnO nano structures.     

Influence of ionic liquids on the surface properties of poplar veneers

In this paper, the influence of four types of imidazolium-based ionic liquids (ILs) on the surface properties of common aspen (Populus tremula) veneers has been studied by using contact angle, electrical conductivity and Fourier transform infrared spectroscopy analysis. The measurements showed that wood wettabillity is increased by IL treatment. The electrical conductivities of treated wood were in the 0.5-1 mS/cm range, higher than the ones reported in the reference literature. It has been determined that the ILs decrease the crystallinity and improve the flexibility of the cellulose matrix. It has been determined by photographic image analysis that the surface roughness of the IL treated veneers decreases in comparison with the untreated samples.     

Volumetric and viscometric study of molecular interactions in the mixtures of some secondary alcohols with equimolar mixture of ethanol and N,N-dimethylacetamide at 308.15 K

Densities and viscosities of mixtures of isopropanol, isobutanol and isoamylalcohol with equimolar mixture of ethanol and N,N-dimethylacetamide have been measured at 308.15 K over the entire composition range. Deviations in viscosity, excess molar volume and excess Gibb’s free energy of activation of viscous flow have been calculated from the experimental values of densities and viscosities. Excess properties have been fitted to the Redlich-Kister type polynomial equation and the corresponding standard deviations have been calculated. The experimental data of viscosity have been used to test the applicability of empirical relations of Grunberg-Nissan, Hind-McLaughlin, Katti-Chaudhary and Heric-Brewer for the systems studied. Molecular interactions in the liquid mixtures have been investigated in the light of variation of deviation and of excess values in evaluated properties.     

Thermal behaviour of two room-temperature ionic liquids containing the methylimidazolium cation

We have investigated the glass transition relaxation of two room-temperature ionic liquids using Modulated Temperature Differential Scanning Calorimetry (MTDSC). Furthermore, conventional DSC was used to clarify their crystallisation behaviour. One of the liquids avoids crystallisation, while the other shows cold crystallisation. A step-by-step temperature scanning experimental procedure was used to analyse in detail the thermal behaviour of the latter in the crystallisation and melting temperature regions. The existence of polymorphism is discussed.     

Universal cubic equation of state and contact values of the radial distribution functions for multi-component additive hard-sphere mixtures

A universal cubic equation of state (UC EOS) is proposed based on a modification of the virial Percus-Yevick (PY) integral equation EOS for hard-sphere fluid. The UC EOS is extended to multi-component hard-sphere mixtures based on a modification of Lebowitz solution of PY equation for hard-sphere mixtures. And expressions of the radial distribution functions at contact (RDFC) are improved with the form as simple as the original one. The numerical results for the compressibility factor and RDFC are in good agreement with the simulation results. The average errors of the compressibility factor relative to MC data are 3.40%, 1.84% and 0.92% for CP3P, BMCSL equations and UC EOS, respectively. The UC EOS is a unique cubic one with satisfactory precision among many EOSs in the literature both for pure and mixture fluids of hard spheres.     

Study of tribochemical decomposition of ionic liquids on a nascent steel surface

Tribological properties and the decomposition process of ionic liquids (1-ethyl-3-methylimidazolium bis(trifluoromethylsulfonyl) imide and 1-dodecyl-3-methylimidazolium bis(trifluoromethylsulfonyl) imide) on a nascent surface of bearing steel 52100 were investigated by a ball-on-disk friction tester in a vacuum chamber equipped with a quadrupole mass spectrometer (Q-MS). Ionic liquids exhibited better tribological properties than synthetic hydrocarbon oil (multialkylated cyclopentane (MAC)) in high vacuum conditions. The induction period for decomposition of MAC was about 10 km, while no obvious gaseous products were observed for ionic liquids even after a sliding distance of 22 km under the same mechanical conditions. The mass spectra indicated that both the anionic and cationic moieties of ionic liquids decomposed on the nascent steel surface during friction processes. The cationic moiety with a longer alkyl chain was more difficult to decompose on the nascent steel surface than that with a shorter alkyl chain. XPS analysis revealed that the tribofilm formed by ionic liquid was mainly composed of FeF₂ and FeS, which deactivated the nascent surface. As a result, desorption rate of gaseous products decreased appreciably comparing with MAC. The critical load for the mechanical activation of the decomposition correspondingly increased from 1.1 N of MAC to 8 N of ionic liquids.     

Thermodynamic regularities for non-polar and polar fluids from the modified SAFT-BACK equation of state

We have used the modified SAFT-BACK EOS for its ability to predict three important thermodynamic regularities for several fluids composed of molecules with different geometries and interactions. The studied regularities included: (i) the common bulk-modulus point on the isotherms of the reduced bulk modulus versus reduced density, (ii) near linearity of the reduced isothermal bulk-modulus as a function of reduced pressure, and (iii) Zeno line regularity which describes near linearity of a contour in the temperature-density plane along which the compressibility factor equals unity. In this work, we also reported the influence of the molecular size and shape on the displacement of intersection point of isothermal bulk-modulus curves versus density.     

A simple derivation of the three magnon bound state equation

A simple derivation of the equation for determining the bound states of three magnons in the Heisenberg linear chain with longitudinal anisotropy is given. The present method utilizes nothing more than the Schrödinger equation and Faddeev’s three body equations, and avoids the introduction of the ideal spin wave Hilbert space.     

Microscopic characterization of tension wood cell walls of Japanese beech (Fagus crenata) treated with ionic liquids

Tension wood that is an abnormal part formed in angiosperms has been barely used for wood industry. In this study, to utilize the tension wood effectively by means of liquefaction using ionic liquid, we performed morphological and topochemical determination of the changes in tension wood of Japanese beech (Fagus crenata) during ionic liquid treatment at the cellular level using light microscopy, scanning electron microscopy and confocal Raman microscopy. Ionic liquid treatment induced cell wall swelling in tension wood. Changes in the tissue morphology treated with ionic liquids were different between normal wood and tension wood, moreover the types of ionic liquids. The ionic liquid 1-ethyl-3-methylimidazolium chloride liquefied gelatinous layers rapidly, whereas 1-ethylpyridinium bromide liquefied slowly but delignified selectively. These novel insights into the deconstruction behavior of tension wood cell walls during ionic liquid treatment provide better understanding of the liquefaction mechanism. The obtained knowledge will contribute to development of an effective chemical processing of tension wood using ionic liquids and lead to efficient use of wood resources.