Fuzzy multi-criteria decision-making based on positive and negative extreme solutions

To encompass decision data vagueness, many researchers generalized multi-criteria decision-making (MCDM) methods in certain environment into fuzzy multi-criteria decision-making (FMCDM) methods under fuzzy environment. In these FMCDM methods, ranking fuzzy numbers based on fuzzy pair-wise comparison is normally essential, but the comparison is a complexity work. To avoid fuzzy pair-wise comparison, we propose a FMCDM method based on positive and negative extreme solutions of alternatives. In the proposed method, two extreme solutions of alternatives are obtained by MAX and MIN operations of fuzzy TOPSIS. Then weakness and strength matrices between alternatives and extreme solutions are derived by a difference function revised from fuzzy preference relation of Lee, and multiplied with weight matrix to be weighted weakness and strength indices. The two weighted indices are respectively transferred into positive and negative indices, and then the two indices integrated into a total performance index. Finally, alternatives can be sorted according to their related performance indices, and FMCDM problems are easily solved, not by fuzzy pair-wise comparison.     

Fuzzy pair-wise dominance and fuzzy indices: An evaluation of productive performance

Usually, efficiency measurement and evaluation are based on the definition of a frontier that envelops the observed production plans. Measurement and evaluation of productive performance is also achieved with the concept of pair-wise dominance that does not require the existence of a frontier along with the required technological assumptions needed for its definition. In situations where measurement inaccuracies occur, the traditional assumption of crisp production plans can be substituted with the alternative assumption of fuzzy production plans as proposed by fuzzy set theory. This research presents indices that capture the degree to which pair-wise dominance occurs between two fuzzy production plans. The proposed approach is based on the various comparison indices known from the literature that are used to compare fuzzy intervals and is compared with an earlier fuzzy pair-wise classification scheme. Finally, the approach is used to evaluate the productive performance of suspect production plans from the preprint insertion manufacturing process.     

A cosine maximization method for the priority vector derivation in AHP

The derivation of a priority vector from a pair-wise comparison matrix (PCM) is an important issue in the Analytic Hierarchy Process (AHP). The existing methods for the priority vector derivation from PCM include eigenvector method (EV), weighted least squares method (WLS), additive normalization method (AN), logarithmic least squares method (LLS), etc. The derived priority vector should be as similar to each column vector of the PCM as possible if a pair-wise comparison matrix (PCM) is not perfectly consistent. Therefore, a cosine maximization method (CM) based on similarity measure is proposed, which maximizes the sum of the cosine of the angle between the priority vector and each column vector of a PCM. An optimization model for the CM is proposed to derive the reliable priority vector. Using three numerical examples, the CM is compared with the other prioritization methods based on two performance evaluation criteria: Euclidean distance and minimum violation. The results show that the CM is flexible and efficient.     

A novel two-phase group decision making approach for construction project selection in a fuzzy environment

This paper considers a construction project problem under multiple criteria in a fuzzy environment and proposes a new two-phase group decision making (GDM) approach. This approach integrates a modified analytic network process (ANP) and an improved compromise ranking method, known as VIKOR. To take uncertainty and risk into account, a new decision making approach is presented with multiple fuzzy information by a group of experts, and a risk attitude for each expert is incorporated that can be expressed linguistically. First, a modified fuzzy ANP method is introduced to address the problem of dependence as well as feedback among conflicting criteria and to determine their relative importance. Then, a fuzzy VIKOR method is extended to rank potential projects on the basis of their overall performance. An illustrative example from the literature is provided for the construction project problem to demonstrate the effectiveness and feasibility of the proposed approach. The computational results show that the proposed two-phase GDM approach is suitable to cope with imprecision and subjectivity for the complicated decision making problem. Finally, the associated results of the proposed approach with risk attitudes and without risk attitudes are compared with the results reported by Cheng and Li [1], and the merits are highlighted.     

A Fuzzy Principal Component Analysis Approach to Hierarchical Evaluation Model for Balanced Supply Chain Scorecard Grading

Effective performance management is critical to efficient supply chain management systems with the balanced scorecard as well as to effective evaluation models and their algorithms. Problems often encountered in the modeling of the balanced scorecard for supply chain are how to overcome the multicollinearity in its index system. In this paper, a new fuzzy hierarchical evaluation model featuring the criteria of the balanced supply chain scorecard is proposed and analyzed on the basis of data about Chinese firms. The model, based on the fuzzy weight’s matrix derived from a fuzzy principal component analysis, overcomes the multicollinearity in the index system of the balanced supply chain scorecard. This method proves good performance in determining the weight distribution matrix of the fuzzy hierarchical evaluation and improves the evaluation accuracy and generalization as shown for a group of firms in western China.     

基于灰色关联法和HA算子的Pythagorean模糊群决策方法

针对Pythagorean模糊群决策问题,提出一种基于Pythagorean模糊混合平均算子的决策方法。首先,提出一种基于Pythagorean模糊信息及其运算法则的Pythagorean模糊混合平均算子;其次,构建一种基于最大熵模型的属性位置权重定权方法,同时根据灰色关联方法提出一种属性客观权重计算方法,进而获得Pythagorean模糊混合平均算子的定权方法;利用Pythagorean模糊混合平均算子对单决策者信息进行融合,通过Pythagorean模糊加权平均算子对各专家信息进行融合,并依据得分函数与精确函数进行排序择优;最后,通过一个算例说明该方法的有效性和可行性。     

FMMSIC: a hybrid fuzzy based decision support system for MMS (in order to estimate interrelationships between criteria)

One of the main tasks in exploitation of ore-body is to select a suitable mining method. In mining method selection (MMS) problems, a decision procedure has to choose the best exploitation method that satisfies the evaluation criteria. It is generally hard to find a mining method that meets all the criteria simultaneously, therefore a good compromise solution is preferred as the final selection. Furthermore, the MMS problem is an inherently uncertain activity. To deal with the uncertainty, this paper presents an hybrid decision support system based on the fuzzy multi attribute decision making, named the fuzzy mining method selection with interrelation criteria (FMMSIC). FMMSIC models the relative weights of criteria by combining the fuzzy analytic network process and fuzzy entropy, and discusses using these hybrid techniques to determine the overall weights. Subsequently, the technique for order preference by similarity to an ideal solution method was modified by various normalization norms according to the MMS problem condition. Finally, to illustrate how the FMMSIC is used for the MMS problems, an empirical study of a real case is conducted. It shows by means of an application that the FMMSIC is well suited as a decision support system for the MMS.     

Multicriteria fuzzy decision-making method using entropy weights-based correlation coefficients of interval-valued intuitionistic fuzzy sets

A multicriteria fuzzy decision-making method based on weighted correlation coefficients using entropy weights is proposed under interval-valued intuitionistic fuzzy environment for the some situations where the information about criteria weights for alternatives is completely unknown. To determine the entropy weights with respect to a decision matrix provided as interval-valued intuitionistic fuzzy sets (IVIFSs), we propose two entropy measures for IVIFSs and establish an entropy weight model, which can be used to determine the criteria weights on alternatives, and then propose an evaluation formula of weighted correlation coefficient between an alternative and the ideal alternative. The alternatives can be ranked and the most desirable one(s) can be selected according to the values of the weighted correlation coefficients. Finally, two applied examples demonstrate the applicability and benefit of the proposed method: it is capable for handling the multicriteria fuzzy decision-making problems with completely unknown weights for criteria.     

An interactive method for multiple criteria group decision analysis based on interval type-2 fuzzy sets and its application to medical decision making

The theory of interval type-2 fuzzy sets provides an intuitive and computationally feasible way of addressing uncertain and ambiguous information in decision-making fields. The aim of this paper is to develop an interactive method for handling multiple criteria group decision-making problems, in which information about criterion weights is incompletely (imprecisely or partially) known and the criterion values are expressed as interval type-2 trapezoidal fuzzy numbers. With respect to the relative importance of multiple decision-makers and group consensus of fuzzy opinions, a hybrid averaging approach combining weighted averages and ordered weighted averages was employed to construct the collective decision matrix. An integrated programming model was then established based on the concept of signed distance-based closeness coefficients to determine the importance weights of criteria and the priority ranking of alternatives. Subsequently, an interactive procedure was proposed to modify the model according to the decision-makers’ feedback on the degree of satisfaction toward undesirable solution results for the sake of gradually improving the integrated model. The feasibility and applicability of the proposed methods are illustrated with a medical decision-making problem of patient-centered medicine concerning basilar artery occlusion. A comparative analysis with other approaches was performed to validate the effectiveness of the proposed methodology.     

Indirect adaptive fuzzy observer and controller design based on interval type-2 T-S fuzzy model

This paper presents the design scheme of the indirect adaptive fuzzy observer and controller based on the interval type-2 (IT2) T-S fuzzy model. The nonlinear systems can be well approximated by IT2 T-S fuzzy model, in which the fuzzy rules’ antecedents are interval type-2 fuzzy sets and consequents are linear state equations. The proposed IT2 T-S fuzzy model is a combination of IT2 fuzzy system and T-S fuzzy model, and also inherits the benefits of type-2 fuzzy logic systems, which is able to directly handle uncertainties and can minimize the effects of uncertainties in rule-based fuzzy system. These characteristics can improve the accuracy of the system modeling and reduce the number of system rules. The proposed method using feedback control, adaptive laws, and on-line object parameters are adjusted to ensure observation error bounded. In addition, using Lyapunov synthesis approach and Lipschitz condition, the stability analysis is conducted. The simulation results show that the proposed method can handle unpredicted disturbance and data uncertainties very well in advantage of the effectiveness of observation and control.     

A mathematical programming model for the fuzzy analytic network process—applications of international investment

Currently, the analytic network process (ANP) method is widely employed to consider the multiple criteria analysis problems with dependence and feedback effects. However, in order to extend the ANP to resolve the problem of uncertainty or human subjective judgment, the concepts of fuzzy numbers should be incorporated into the ANP to represent the subjective uncertain pairwise judgments. In this paper, therefore, we propose a novel fuzzy analytic network process (FANP) model by solving a mathematical programming problem. Unlike other FANPs, the proposed method does not require the reciprocity assumption of the weight ratios between criteria, and it can derive local and global weights simultaneously in a single model. Two numerical examples of international investment problems are used to demonstrate the proposed method.     

2-order additive fuzzy measure identification method based on diamond pairwise comparison and maximum entropy principle

Fuzzy measures can flexibly describe the relative importance of decision criterion as well as their interactions in multicriteria decision making. Based on the diamond pairwise comparison, a new identification method of 2-order additive fuzzy measure is proposed. The relative weight and the interaction degree can be obtained simultaneously for every pair of criteria in the diamond pairwise comparison. The Choquet integral-based equivalent alternative curve can help the decision maker estimate the interaction degrees between criteria. The overall importance of each criterion is obtained by the maximum eigenvector method of AHP. According to the maximum fuzzy measure entropy principal, a nonlinear programming is constructed to identify the interaction indices among criteria. Finally, an illustrative example shows the feasibility and validity of the proposed identification method.     

A heuristic approach for deriving the priority vector in AHP

This paper proposes an approach for deriving the priority vector from an inconsistent pair-wise comparison matrix through the nearest consistent matrix and experts judgments, which enables balancing the consistency and experts judgments. The developed algorithm for achieving a nearest consistent matrix is based on a logarithmic transformation of the pair-wise comparison matrix, and follows an iterative feedback process that identifies an acceptable level of consistency while complying with experts preferences. Three numerical examples are examined to illustrate applications and advantages of the developed approach.     

Generalized hesitant fuzzy synergetic weighted distance measures and their application to multiple criteria decision-making

The purpose of this paper is to present a generalized hesitant fuzzy synergetic weighted distance (GHFSWD) measure, which is based on the generalized hesitant fuzzy weighted distance (GHFWD) measure and the generalized hesitant fuzzy ordered weighted distance (GHFOWD) measure proposed by Xu and Xia [Z. Xu, M. Xia, Distance and similarity measures for hesitant fuzzy sets, Inf. Sci. 181 (2011) 2128–2138.], and investigate its some desirable properties and special cases. The GHFSWD measure not only generalizes both the GHFWD and GHFOWD measures as well as the common hesitant fuzzy distance measures, but also reflects the importance degrees of both the given individual distances and their ordered positions. Then, based on the defined notions of positive ideal hesitant fuzzy set and negative ideal hesitant fuzzy set, we utilize the proposed GHFSWD measure to develop a method for multiple criteria decision making with hesitant fuzzy information. The method is flexible because it allows decision makers to provide preference with hesitancy and determine different decision results by choosing different decision strategies. Finally, a numerical example is provided to illustrate the feasibility and practicality of the proposed method.     

On Optimal Forecasting with Soft Computation for Nonlinear Time Series

In this paper we present a new approach on optimal forecasting by using the fuzzy set theory and soft computing methods for the dynamic data analysis. This research is based on the concepts of fuzzy membership function as well as the natural selection of evolution theory. Some discussions in the sensitivity of the design of fuzzy processing will be provided. Through the design of genetic evolution, the AIC criteria is used as the adjust function, and the fuzzy memberships function of each gene model are calculated. Simulation and empirical examples show that our proposed forecasting technique can give an optimal forecasting in time series analysis.     

基于直觉模糊集的多准则模糊决策问题

提出了一种基于直觉模糊集处理模糊决策问题的新方法.该方法用直觉模糊集描述方案关于准则集的满足程度与不满足程度.而且该方法允许决策者给出准则对于模糊集“重要”的隶属度与非隶属度,即准则的权重也由直觉模糊集表示.这种方法为决策者做出最优决策提供了一种方便有效的方法.     

不完全信息多属性决策的一种新方法

本文研究在属性权重给出某种系数序的情况下的多属性决策问题，借助于时序多指标决策的思想，通过简单的数值运算求得方案的净评价值，从而确定方案间的优势关系．最后给出了算例分析．     

Fuzzy decision-making method based on the weighted correlation coefficient under intuitionistic fuzzy environment

A multicriteria fuzzy decision-making method based on weighted correlation coefficients using entropy weights is proposed under intuitionistic fuzzy environment for some situations where the information about criteria weights for alternatives is completely unknown. To determine the entropy weights with respect to a set of criteria represented by intuitionistic fuzzy sets (IFSs), we establish an entropy weight model, which can be used to get the criteria weights, and then propose an evaluation formula of weighted correlation coefficient between an alternative and the ideal alternative. The alternatives can be ranked and the most desirable one(s) can be selected according to the weighted correlation coefficients. Finally, two illustrative examples demonstrate the practicality and effectiveness of the proposed method.     

An integrated FCM and fuzzy soft set for supplier selection problem based on risk evaluation

Supplier selection problem, considered as a multi-criteria decision-making (MCDM) problem, is one of the most important issues for firms. Lots of literatures about it have been emitted since 1960s. However, research on supplier selection under operational risks is limited. What’s more, the criteria used by most of them are independent, which usually does not correspond with the real world. Although the analytic network process (ANP) has been proposed to deal with the problems above, several problems make the method impractical. This study first integrates the fuzzy cognitive map (FCM) and fuzzy soft set model for solving the supplier selection problem. This method not only considers the dependent and feedback effect among criteria, but also considers the uncertainties on decision making process. Finally, a case study of supplier selection considering risk factors is given to demonstrate the proposed method’s effectiveness.     

A QFD-based fuzzy MCDM approach for supplier selection

Supplier selection is a highly important multi-criteria group decision making problem, which requires a trade-off between multiple criteria exhibiting vagueness and imprecision with the involvement of a group of experts. In this paper, a fuzzy multi-criteria group decision making approach that makes use of the quality function deployment (QFD) concept is developed for supplier selection process. The proposed methodology initially identifies the features that the purchased product should possess in order to satisfy the company’s needs, and then it seeks to establish the relevant supplier assessment criteria. Moreover, the proposed algorithm enables to consider the impacts of inner dependence among supplier assessment criteria. The upper and the lower bounds of the weights of supplier assessment criteria and ratings of suppliers are computed by using the fuzzy weighted average (FWA) method. The FWA method allows for the fusion of imprecise and subjective information expressed as linguistic variables or fuzzy numbers. The method produces less imprecise and more realistic overall desirability levels, and thus it rectifies the problem of loss of information. A fuzzy number ranking method that is based on area measurement is used to obtain the final ranking of suppliers. The computational procedure of the proposed framework is illustrated through a supplier selection problem reported in an earlier study.