Synthesis and characterization of amphiphilic fullerenes and their Langmuir-Blodgett films

We report here the synthesis and characterization of three amphiphilic fullerene derivatives and their Langmuir-Blodgett thin films. Two of the C(60) amphiphiles are mono-derivatives with a long alkyl chain terminated with either -COOH (2) or NH(2) (3) as the hydrophilic headgroup, and the third one (5) is designed to bear the same NH(2) group as 3 but with 10 additional hydrophobic alkyl chains grafted on the C(60) sphere (Scheme 1). These amphiphiles form stable, ordered monolayers at the air-water interface. The molecular packing at the air-water interface and the mean area per molecule are determined by pressure isotherms at room temperature. Hysteresis of pressure isotherms of side chain C(60) (5) shows complete reversibility upon compression and decompression, which suggests that side chains on the C(60) sphere inhibit formation of aggregates at the air-water interface. Comparative studies of all three amphiphiles allow us to better determine the interaction between C(60)'s and their self-assembly kinetics at the air-water interface. Monolayers of monoderivatized amphiphiles (2 and 3) were transferred successfully onto quartz substrates as Z-type multilayered Langmuir-Blodgett films, and monolayers of 5 were transferred as Y-type films. Detailed characterization of the multilayer films (Z-type deposition) prepared from amine-terminated C(60) (3) using X-ray and neutron reflectometry reveals staggering of C(60) spheres and a head-to-head (Y-type) structure presumably due to flipping and reattaching of C(60) amphiphiles to the previous underlying C(60) layer.     

Synthesis and properties of thermoplastic and dissolvable polysiloxanes containing polyhedral oligomeric silsesquioxane

There are many benefits associated with thermoplastic silicones, but very few examples exist: silicone resins or rubbers are normally thermosets. In this article, a facile and efficient approach was reported to prepare thermoplastic silicone by introducing a bulky side siloxane group. Monofunctional polyhedral oligomeric silsesquioxane (POSS), as the bulky siloxane group, was grafted onto the linear polysiloxane backbone via thiol–ene click reaction, endowing the liquid polysiloxane with thermoplastic nature. The POSS-grafted polysiloxane could be remolded by a hot-melting or solution casting process. It was worth noting that the novel thermoplastic silicone was composed of both linear siloxane main chains and siloxane side groups, which was distinctly different from previous researches on thermoplastic silicones consisted of siloxane main chains and organic side groups. Thermal analysis, rheological characterization and molecular dynamics simulation results revealed the thermoplastic properties of POSS-grafted polysiloxane depended on the bulky POSS's hindrance to the movement of the polymer backbone rather than the interaction between the organic side groups.     

Rediscovering silicones: "unreactive" silicones react with inorganic surfaces

Chemical reactions of linear trimethylsilyl-terminated poly(dimethylsiloxane)s with the surfaces of oxidized silicon, titanium, aluminum, and nickel are reported. These reactions lead to covalently attached poly(dimethylsiloxane) polymer chains and to hydrophobized inorganic surfaces. Linear silicones of this type (silicone oils) are generally not considered to be reactive with inorganic oxide surfaces, and an enormous research effort over the last 50 years to develop other silicon-containing reagents with reactive functional groups did not consider the simple alternative that we report. In retrospect, with the acknowledgment of the facile equilibration of siloxane chains with either acid or base catalysis (that was well-known in the 1940s and 1950s), the synthetic approach to functionalized inorganic surfaces by use of linear silicones is obvious. We also report the reactions of poly[3,3,3-trifluoropropyl)methylsiloxane], poly[(3-aminopropyl)methylsiloxane-co-dimethylsiloxane], poly(phenylmethylsiloxane-co-dimethylsiloxane), and poly(dimethylsiloxane-block-ethylene oxide) with oxidized silicon surfaces, which suggest that this reaction is general for silicones.     

Do‐it‐yourself functionalized silicones part 1: basic methods for characterization of commercial products

Conventional silicone fluids of varying composition, microstructure, and functionality are commercially available with a view to prepare films, elastomers, or resins. This paper is the first of a series of papers devoted to the synthesis, characterization, and application of vinyl and hydrido‐functionalized silicones. We present some basic analytical techniques useful to unacquainted people to fully characterize silicone fluids in terms of molar mass, purity, composition, structure, and functionality. Some commercial polymers were thus examined by size exclusion chromatography (SEC), from which molar masses were checked and compared with those from the provider (derived from viscosities). Two SEC‐derived techniques were used to confirm the perfect linearity of the chains. ¹H and ²⁹Si NMR spectrograms were recorded, from which chemical shifts gave the position of the functional groups (either at both chain‐ends or inside the chains) and from which intensities of the NMR signals provided quantitative data, namely number‐average molar mass M_n and contents of functional groups. In the final part, special emphasis is laid on the microstructure of the chains. Copyright © 2008 John Wiley & Sons, Ltd.     

Amphiphilic thermoset elastomers from metal‐free,click crosslinking of PEG‐grafted silicone surfactants

The hydrophobicity of silicone elastomers can compromise their utility in some biomaterials applications. Few effective processes exist to introduce hydrophilic groups onto a polysiloxane backbone and subsequently crosslink the material into elastomers. This problem can be overcome through the utilization of metal‐free click reactions between azidoalkylsilicones and alkynyl‐modified silicones and/or PEGs to both functionalize and crosslink silicone elastomers. Alkynyl‐functional PEG was clicked onto a fraction of the available azido groups of a functional polysiloxane, yielding azido reactive PDMS‐g‐PEG rake surfactants. The reactive polymers were then used to crosslink alkynyl‐terminated PDMS of different molecular weights. Using simple starting materials, this generic yet versatile method permits the preparation and characterization of a library of amphiphilic thermoset elastomers that vary in their composition, crosslink density, elasticity, hydrogel formation, and wettability. An appropriate balance of PEG length and crosslink density leads to a permanently highly wettable silicone elastomer that demonstrated very low levels of protein adsorption. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2015 , 53, 1082–1093     

Non-surface activity and micellization of ionic amphiphilic diblock copolymers in water. Hydrophobic chain length dependence and salt effect on surface activity and the critical micelle concentration

We reported previously (Macromolecules 2003, 36, 5321; Langmuir, 2004, 20, 7412) that amphiphilic diblock copolymers having polyelectrolytes as a hydrophilic segment show almost no surface activity but form micelles in water. In this study, to further investigate this curious and novel phenomenon in surface and interface science, we synthesized another water-soluble ionic amphiphilic diblock copolymer poly(hydrogenated isoprene)-b-sodium poly(styrenesulfonate) PIp-h2-b-PSSNa by living anionic polymerization. Several diblock copolymers with different hydrophobic chain lengths were synthesized and the adsorption behavior at the air/water interface was investigated using surface tension measurement and X-ray reflectivity. A dye-solubilization experiment was carried out to detect the micelle formation. We found that the polymers used in this study also formed micelles above a certain polymer concentration (cmc) without adsorption at the air-water interface under a no-salt condition. Hence, we further confirmed that this phenomenon is universal for amphiphilic ionic block copolymer although it is hard to believe from current surface and interface science. For polymers with long hydrophobic chains (more than three times in length to hydrophilic chain), and at a high salt concentration, a slight adsorption of polymer was observed at the air-water interface. Long hydrophobic chain polymers showed behavior "normal" for low molecular weight ionic surfactants with increasing salt concentration. Hence, the origin of this curious phenomenon might be the macroionic nature of the hydrophilic part. Dynamic light scattering analysis revealed that the hydrodynamic radius of the block copolymer micelle was not largely affected by the addition of salt. The hydrophobic chain length-cmc relationship was found to be unusual; some kind of transition point was found. Furthermore, very interestingly, the cmc of the block copolymer did not decrease with the increase in salt concentration, which is in clear contrast to the fact that cmc of usual ionic small surfactants decreases with increasing salt concentration (Corrin-Harkins law). These behaviors are thought to be the special, but universal, characteristics of ionic amphiphilic diblock copolymers, and the key factor is thought to be a balance between the repulsive force from the water surface by the image charge effect and the hydrophobic adsorption.     

Two-dimensional center-of-mass diffusion of lipid-tethered poly(2-methyl-2-oxazoline) at the air-water interface studied at the single molecule level

The two-dimensional (2D) center-of-mass diffusion, D, of end-tethered poly(2-methyl-2-oxazoline) (PMOx) lipopolymer chains was studied in a Langmuir monolayer at the air-water interface using wide-field single molecule fluorescence microscopy. In this case, tethering and stabilization of hydrophilic PMOx chains at the air-water interface is accomplished via end-tethering to lipid molecules forming a hydrophobic anchor. To explore the influence of molecular weight, M n, and surface concentration, c s, on lateral mobility, two different PMOx chain lengths of n = 30 and 50 ( n, number of monomer units) were analyzed over a wide range of c s. Using multiparticle tracking analysis of TRITC-labeled PMOx lipopolymers, we found two regimes of lipopolymer lateral mobility. At low c s, D is independent of surface concentration but increases with decreasing n. Here diffusion properties are well described by the Rouse model. In contrast, at more elevated c s, the data do not follow Rouse scaling but are in good agreement with a free area-area model of diffusion. The current study provides for the first time experimental insight into the 2D center-of-mass diffusion of end-tethered polymers at the air-water interface. The obtained results will be of importance for the understanding of diffusion processes in polymer-tethered phospholipid bilayers mimicking biomembranes at low and high tethering concentrations.     

Hybrid organic–inorganic materials: from child’s play to energy applications

The field of hybrids has boomed since its initial conception with silicones as structural materials to the wealth of different types of hybrid materials studied nowadays as functional materials. Hybrids based on conducting polymers and a great variety of inorganic species constitute a growing area of this field. We present a brief review of the intersection between conducting polymer hybrids and electrochemical applications to energy storage and conversion. But beyond examples of hybrids active in batteries, supercapacitors, solar or fuel cells, we have tried to convey the standing challenges concerning the design of chemically (and electrochemically) complex hybrid systems with components and building blocks ranging from extended oxides or nanoparticles to carbon or oxide nanotubes, to clusters and to molecules and the opportunities arising from their integration with conducting polymers.     

Mechanism of stabilization of silicone oil-water emulsions using hybrid siloxane polymers

Silicone polymers, due to their high lubricity and good spreading properties, are widely used in industrial applications. Being insoluble in water and most hydrocarbons, a common mode of delivering silicones is in the form of emulsions. To stabilize silicones in the emulsion form more efficiently, it is useful to understand the mechanism of emulsion stabilization. Two different mechanisms of emulsion stabilization have been proposed in the past: film formation and precipitation (known as the Pickering mechanism). These two mechanisms are different, and there is a need to further investigate this issue. The aim of the present work was to investigate the mechanism of stabilizing silicone emulsions and to propose a generalized behavior. Several experiments including the measurement of Langmuir isotherms, rheology experiments, phase diagram studies, and microscopy experiments were conducted. All of the above techniques indicated that the functional groups interact strongly with the water phase. The emulsions were found to be stable only if the emulsifiers were soluble in silicone oil or the water phase, and the stability decreased as the emulsifier precipitated. In most cases tested here, the emulsifiers were not observed to precipitate as reported earlier for the Pickering mechanism, and the emulsion stabilization followed film formation. These results should help to predict emulsion stabilization for unknown systems.     

Thermal stability of hybrid materials based on epoxy functional (poly)siloxanes

Epoxy functional (poly)siloxanes are one of the most important classes of modified silicones. Due to high reactivity of epoxy group and specific features of siloxane chain, they can make an excellent raw material for synthesis of hybrid materials. Results obtained in this study have shown that both the modification of epoxy resins with epoxy functional disiloxanes as well as the application of polysiloxanes with long polysiloxane chains and a specified content of epoxy groups makes it possible to produce hybrid materials of very good thermal stability. Crosslinking reactions were carried out with use of four diamines of which the best one appeared to be 4,4??-diaminodiphenylmethane. The highest thermal stability was found in the case of hybrid materials obtained from epoxy functional polysiloxanes.     

Nonwettable thin films from hybrid polymer brushes can be hydrophilic

Hybrid brushes composed of two liquid polymers, poly(dimethylsiloxane) (PDMS) and a highly branched ethoxylated polyethylenimine (EPEI), were synthesized on Si wafers by the "grafting to" method and by applying a combinatorial approach (fabrication of gradient brushes). The combinatorial approach revealed a strong effect of "layer assisted tethering", which allowed us to synthesize hybrid brushes twice as thick as the reference homopolymer brushes. The hybrid brushes are stable thin films that can rapidly and reversibly switch between hydrophilic and hydrophobic states in water and air, respectively. The switching in water affects a rapid release of amino functional groups which can be used to regulate adhesion and reactivity of the material. The switching in air rapidly returns the brush to a hydrophobic state. The hybrid brush is hydrophilic because of two mechanisms: (1) exposure of EPEI chains to the brush-water interface under water, and (2) retention of some fraction of water via swollen EPEI chains (the EPEI chains swell by 2-3 times), which are conserved by a PDMS cap in air. The hybrid brush is wettable under water, and at the same time, the brush is nonwettable in air because water droplets are trapped in a metastable state when the water contact angle is above 90 degrees .     

The properties of water in solutions of hydrophilic polymers

The properties of water in solutions of hydrophilic polymers were compared with those in solutions of their monomeric analogues. The properties of polar groups grafted to polymeric molecules were known to remain unchanged. A comparison of the properties of water in solutions of polymers and the corresponding monomers under equal conditions therefore allowed us to obtain information about the influence of polymeric bonds on the properties of water in solutions of polymers. Proceeding from this, we analyzed the influence of polymeric chains and three-dimensional polymeric network on the activity and concentration of water in solutions of polymers.     

Synthesis and characterization of silsesquioxane-cored star-shaped hybrid polymer via “grafting from” RAFT polymerization

Organic/inorganic hybrid polymers have been widely studied for their potential use in nanocontainers and nanocarriers.In this article,one star-shaped hybrid polymer,polyhedral oligomeric silsesquioxane (POSS) grafted poly (N,N-(dimethylamino) ethyl methacrylate)(POSS-g-PDMA),was synthesized via reversible addition-fragmentation chain transfer polymerization (RAFT).The pH stimuli-responsive character of POSS-g-PDMA in aqueous solution were also studied.     

Conformational polymorphism and amphiphilic properties of resorcinarene octapodands

o-Nitroaniline functionalized resorcinarene octapodands 1-5 with pendant methyl, ethyl, pentyl, nonyl or 1-decenyl groups, respectively, were synthesized and their structural properties investigated using X-ray crystallography and NMR spectroscopy. The upper rim of each podand is identical containing flexible side arms, in which rotation around the -OCH(2)CH(2)N- linkers create excellent possibilities for polymorphism. Two conformational polymorphs of acetone solvate of 2 were identified containing different side arm orientation and crystal packing. Compound 1 crystallized from acetone and nitromethane yielding two pseudopolymorphs with different packing motifs. The longer alkyl chains of 3-5 lead to differences in solubility and induce amphiphilic properties, which were studied at the air-water interface using the Langmuir-film technique. Crystals of amphiphilic compound 5, which has hydrophobic alkyl tails at the lower rim and hydrophilic nitroaniline groups at the upper rim, showed an interesting packing motif with alternating aromatic and aliphatic layers. Versatile structures of the octapodands in solid state and in solution serve as an example of how conformational flexibility can be utilized in crystal engineering and creating self-assembling monolayer structures.     

Air-water interfacial behavior of linear-dendritic block copolymers containing PEG and azobenzene chromophores

Fabrication of Langmuir films at the air-water interface of four linear-dendritic block copolymers (LDBCs) is described. The LDBCs are composed of a linear hydrophilic chain of poly(ethylene glycol) (PEG) and the first four generations of hydrophobic aliphatic polyester dendrons functionalized at the periphery with cyanoazobenzene chromophores. Langmuir films of the LDBCs, coded as PEG-AZOn (n indicates the number of cyanoazobenzene units at the periphery of the dendritic block), have been characterized by a combination of surface pressure versus area per molecule isotherms, UV-vis reflection spectroscopy and Brewster angle microscopy. The observed PEG-AZOn Langmuir film behavior depends strongly on the hydrophilic/hydrophobic ratio. A typical transition, related to PEG chains desorption from the air-water interface into the water subphase is observed for all the LDBCs, except for PEG-AZO16. In addition, PEG-AZO2 and PEG-AZO4 show a second transition whose nature has been studied in detail. Azobenzene chromophore interactions have been shown to be relevant in the organization of PEG-AZOn (n=4, 8 and 16) Langmuir films. Moreover, for PEG-AZO16 the orientation of the azobenzene units has been determined, revealing the formation of a well organized structure of azobenzene moieties at the air-water interface.     

Flame retardancy of silicone-based materials

This review describes some recent works related to the development of the flame retardation of silicone elastomers and/or applications of silicones as flame retardant agents in other polymers. First, the thermal degradation of silicones themselves is discussed, focussing on depolymerization mechanisms, effect of structure, heating conditions, and effect of additives (i.e. less than 5 wt% fillers) on thermal degradation of silicones. Then, the influence of several types of mineral fillers (of up to 80 wt% content) as ceramization agents of silicones is presented. Finally, the introduction of (functionalized) silicones as flame retardants into other polymers is described.     

Insight into the origin of the thermosensitivity of poly[2-(dimethylamino)ethyl methacrylate].

We investigate the effects of pH and temperature on the conformational changes of poly[2-(dimethylamino)ethyl methacrylate] (PDEM) chains at the air/water interface by using Langmuir balance and sum frequency generation vibrational spectroscopy. At pH 4, the tertiary amine groups are fully charged and the PDEM chains are so hydrophilic that they completely enter into the water phase and do not exhibit thermosensitivity. At pH 7, these groups are only partially charged, and the accompanying hydration/dehydration--followed by repartitioning into the water and air phases--gives rise to a marked thermosensitivty. Finally, at pH 10, the tertiary amine groups become uncharged and thus preferentially stay in the hydrophobic air phase, devoid of associated water molecules, which results in the surface-pressure change (DeltaPi) being nearly independent of the temperature. Our Langmuir-balance experiments, coupled with surface-sensitive spectroscopy, demonstrate that: 1) the thermosensitivity of the PDEM chains relates to the hydration/dehydration of the tertiary amine groups, 2) the phase transition of thermosensitive polymers is most likely initiated by the dehydration of the chains, and 3) the phase transition of thermosensitive polymers at the air/water interface is markedly different from that in aqueous solution because of the redistribution of the macromolecular segments induced by the asymmetric forces at the air/water interface.     

Studies on Hybrid Organic/Inorganic Nanocomposite Gels Using Photoluminescence Techniques

Summary.  Transparent nanocomposite gels made of hybrid organic/inorganic polymers, synthesized through the sol-gel method, composed of poly-(ethylene oxide) or poly-(propylene oxide) chains, and grafted on silica through urea bridges, have been studied by steady-state and time-resolved photoluminescence techniques. These nanocomposite materials consist of two distinguished subphases, an organic and an inorganic one. The volume fraction of the organic (polyether) subphase is larger than that of the inorganic (silica) subphase, and it increases with increasing polyether chain size. The condensation of the silica subphase provides luminescent entities emitting light by electron-hole recombination on delocalized states associated with the active chemical species of the urea bridges. Materials with smaller polyether chains are more luminescent than such with longer polyether chains. Divalent or trivalent cations introduced into these materials enhance the luminescence intensity by solubilization close to the silica cluster surface and thus by decreasing surface defects and the ensuing quenching mechanism. Received June 23, 2000. Accepted (revised) July 18, 2000     

Recent advances and actual challenges in late transition metal catalyzed hydrosilylation of olefins from an industrial point of view

Hydrosilylation of olefins is the key catalytic reaction for the production of industrially important organosilicon compounds such as organofunctional silanes and silicones. Moreover catalytic hydrosilylation is used for crosslinking of silicone polymers to elastomers and silicone-based release coatings, and for coupling of silanes and siloxanes to organic polymers. Industrially relevant aspects of hydrosilylation are dominated by the selectivity, activity (defined by the turnover frequency (TOF)), and stability (defined by the turnover number (TON)) of hydrosilylation catalysts as well as switchable catalyses. Furthermore, the high and volatile price of platinum as the industrially most important catalytic metal is a strong motivation for the reduction of precious metal consumption, such as homogeneous catalyst recycling or increasing the TOF resp. TONs of established hydrosilylation catalysts, or employing lower-priced transition metal catalysts. The selectivity of hydrosilylation determines yield and production costs of functional silanes, e.g. hydrosilylation products of allyl chloride, but is of equal importance for the product quality of silane-modified organic polymers and hybrid polymers. As industrial applications of hydrosilylation curing silicones, such as release coatings and elastomers, continuously move towards higher production speed, this requires catalytic systems capable of very high activity resp. turnover frequencies at temperatures typically above 100 °C, but allowing shelf-stable silicone compositions and therefore requiring suppression of any catalytic activity at ambient conditions prior use. This form of switchable catalysis employs carefully designed catalytic systems, which are activated by heating or photoactivation in a very short period of time, demanding very high standards of industrial hydrosilylation chemistry.     

Thermomechanical properties and phase structure of epoxy/silica nano‐hybrid materials constructed from a linear silicone oligomer

Epoxy‐grafted silicone oligomer (ESO), which has a linear silicone chain in the backbone moiety, was synthesized from a trifunctional alkoxysilane via a sol–gel reaction. Characterization of ESO was performed with ¹H and ²⁹Si NMR, Fourier transform infrared, and gel permeation chromatography. The number‐average molecular weight of ESO was 3300. By adding the silicone oligomer as the inorganic source in the curing process of the epoxy resin, novel epoxy/silica hybrid materials were prepared. It was observed by transmission electron microscope that fine silica‐rich domains of about 5‐nm diameter were uniformly dispersed in the cured epoxy matrix. Thermomechanical properties of the hybrid materials were also investigated. The storage modulus in the rubbery region and the peak area of the tan δ curve at the glass‐transition region increased and decreased, respectively, with the hybridization of the silica network. The mobility of the epoxy network chains should be considerably suppressed by the hybridization with the silica network. © 2005 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 43: 1631–1639, 2005