Influence of ammonium nitrate in phase transitions of Langmuir and Langmuir-Blodgett films at air/solution and solid/solution interfaces

The effect of ammonium nitrate on the phase transitions in Langmuir films of amphiphiles-stearic acid, stearyl amine (STAM), stearyl alcohol, dihexadecylphosphate, and the quarternized ammonium salt dioctadecyldimethylammonium bromide have been studied at air/water interface and in local ordering of their Langmuir-Blodgett films (LB films). The study shows that except for the stearyl amine (STAM) all other monolayers exhibit a liquid-expanded to liquid-condensed transition with slight expansion in area in the presence of ammonium nitrate. STAM monolayers show a new phase transition, which possibly arises due to the differently ionized amino groups, and change in solvation sheath due to an ion-dipole type interaction between the amino groups and the ammonium ion in the subphase. Mixed films of the amine with the acid and alcohol did not show such intermediate phases indicating that competing H-bonds between polar groups themselves and dipolar couplings between the polar groups and ammonium nitrate play a major role in the organization of the molecules at the interface. The above effect resulting in a change in the local order is borne out by Brewster angle micrographs (BAM) of the Langmuir films of STAM at air/solution interface. Such behavior is also seen at solid/liquid interfaces where the polar component of surface energy undergoes a drastic change for the amine films transferred onto solid substrates from the air/ammonium nitrate solution interface.     

Effect of additives on the amination of 2-oxoglutaric acid by gamma-radiation

The effect of added substances was studied on the yield of glutamic acid produced by gamma-ray irradiation of 2-oxoglutaric acid and ammonia in aqueous solution. The contents of amino acids in the irradiated solutions were determined with amino acids analyzer. Sodium nitrate, allyl alcohol or sodium formate was used as an added substance. The yield of glutamic acid significantly decreased by the addition of nitrate, and it was little affected by the addition of allyl alcohol. In the presence of formate the yield increased from G = 0.4 (2-oxoglutaric acid 0.05M and ammonium hydroxide 2M) to G = 1.1. As a result, it was found that hydrated electron contributes on the formation of glutamic acid, but hydroxyl radical does not. The yield showed a maximum at ca. 0.1 M ammonium hydroxide concentration. These facts indicate that NH2 radical does not contribute to the formation of glutamic acid. As a reaction mechanism, it can be explained that 2-oxoglutaric acid which had been reduced by hydrated electron reacts with ammonia.     

外力辅助分散作用下环氧树脂粘土纳米复合材料中粘土的微观结构与解离机理研究

采用不同分散方法(机械搅拌、高速均质搅拌和球磨分散)制备环氧树脂粘土纳米复合材料,研究了分散方法对不同有机粘土解离结构和纳米复合材料力学性能的影响,并在此基础上探讨了粘土的解离机理.结果表明,普通机械搅拌只能使小粒径粘土或大粒径粘土团聚体的外部片层解离;施加一定的外力(如高速均质搅拌)促进粘土团聚体分散,有利于粘土片层的解离;利用剪切摩擦作用较强的球磨法分散粘土,不同处理剂改性粘土的内外片层都可以充分解离,而有机改性剂中酸性质子的催化作用对粘土片层解离的影响不大,只要粒径足够小,片层解离的驱动力(基体弹性力、反应性等)能够克服其所受阻力(片层引力、层外基体粘性阻力、层内粘性引力等),粘土内外各片层将会同时向外迁移而解离.纳米复合材料的力学性能大大改善,冲击强度和弯曲强度分别提高近50%和8%;     

Influence of the nature of molybdenum compounds on the activity of Mo/γ-Al<Subscript>2</Subscript>O<Subscript>3</Subscript> and NiMo/γ-Al<Subscript>2</Subscript>O<Subscript>3</Subscript> hydrotreating catalysts

The influence of the nature of molybdenum compounds on the catalytic activity of sulfided NiMo/γ-Al₂O₃ catalysts was studied. The samples were prepared by impregnating the support with mixed aqueous solutions of nickel nitrate and molybdenum-containing compounds: ammonium paramolybdate and the 6-series heteropoly compounds (HPCs) ammonium 6-molybdonickelate (NiMo₆-HPC) and ammonium 6-molybdoaluminate (AlMo₆-HPC). Complexing agents (tartaric acid or a solution of NH₃) were used for stabilizing mixed aqueous ammonium paramolybdate and nickel nitrate solutions and for simultaneously producing an acidic or alkaline medium. The starting molybdenum compounds and catalysts in the oxide form were characterized using IR spectroscopy and x-ray diffraction analysis. The activity of catalysts based on NiMo₆-HPC in the hydrogenolysis of thiophene and in the hydrotreating of the diesel fraction was higher than that of catalysts based on ammonium paramolybdate: at 320°C, the degree of sulfur removal from the diesel fraction was higher by 13–16% and the average degree of hydrogenation of polycyclic aromatic hydrocarbons was higher by 14–15%. It was also found that the use of AlMo₆-HPC does not cause such an effect.     

On-line concentration of s-triazine herbicides in micellar electrokinetic chromatography using a cationic surfactant

A new method for the simultaneous determination of anions (sulfate, nitrate, and chloride) and cations (sodium, ammonium, potassium, magnesium, and calcium) in acid rain waters was investigated using high-performance ion-exclusion/cation-exchange chromatography with conductimetric detection on a separation column packed with a polymethacrylate-based weakly acidic cation-exchange resin in the hydrogen-form and an eluent comprising 1.5 mM sulfosalicylic acid–6 mM 18-crown-6 at pH 2.6, operated at 1.5 ml/min. Effective separation and highly sensitive conductimetric detection for the anions and the cations was achieved in about 14 min. Since the ionic balance (equivalents of anions/equivalents of cations) of acid rain waters of different pH (4.40–4.67) ranged from 0.97 to 0.94, evaluation of the water quality of acid rain was possible. This method was successfully applied to the simultaneous determination of the anions and the cations in acid rain transported from mainland China and North Korea to central Japan monitored by a meteorological satellite data analyzer.     

Immobilization of ethylenesulfide on silica surface using acid and base catalysts Adsorption and thermodynamic data

The reaction of cyclic ethylene sulfide with 3-aminopropyltrimethoxysilane resulted in a new silylating agent, which was anchored onto a silica surface via the sol-gel procedure using hydrochloric acid or ammonium hydroxide as acid or base catalysts, respectively. Both organofunctionalized surfaces have the ability to adsorb divalent cations from aqueous nitrate solution. Through calorimetric titrations, the thermodynamic data of cation-basic center interactions were obtained. Exothermic enthalpy values were obtained for all interaction processes. The calculated free Gibbs energy is in agreement with the spontaneity of the reactions and the positive entropy values for all reactions are favorable for these systems.     

Crystal packing of ammonium salts of arylenebis(phenylphosphinic) acids

It was shown for the first time that the crystal packing mode of the ammonium salt of thiophene-2,5-diylbis(phenylphosphinic acid) substantially differs from that of the dimethyl-ammonium salt of 1,4-phenylenebis(phenylphosphinic acid). The former crystal packing is a three-layer supramolecular sandwich structure consisting of two anionic layers separated by a layer of ammonium cations, whereas the supramolecular organization of the latter salt is based on alternating layers of anions and cations linked by hydrogen bonds.     

Determination of benzoyl bisulphide by desulphurisation and solvolysis

Benzoyl disulphide is rapidly and quantitatively desulphurised to the monosulphide by reaction with triphenylphosphine in aqueous methanol at 25 degrees . The monosulphide reacts with methanol to form thiobenzoic acid and methyl benzoate. Benzoyl disulphide also reacts with methanol in solutions containing ammonium acetate or sodium acetate yielding thiobenzoic acid, methyl benzoate and elemental sulphur. Benzoyl disulphide and sulphur were detected by their polarographic reduction waves. Thiobenzoic acid was detected by its polarographic oxidation wave and yields were determined by amperometric silver nitrate titrations.     

Simultaneous ion-exclusion/cation-exchange chromatography of anions and cations in acid rain waters on a weakly acidic cation-exchange resin by elution with sulfosalicylic acid

A simple, selective, and sensitive method for the simultaneous determination of anions (sulfate, nitrate, and chloride) and cations (sodium, ammonium, potassium, magnesium, and calcium) in acid rain waters was developed using ion-exclusion/ cation-exchange chromatography with conductimetric detection. A weakly acidic cation-exchange resin column (Tosho TSKgel OA-PAK-A) and a sulfosalicylic acid-methanol-water eluent was used. With a mobile phase comprising 1.25 mM sulfosalicylic acid in methanol-water (7.5:92.5) at 1.2 ml/min, simultaneous separation and detection of the above anions and cations was achieved in about 30 min. Linear calibration plots of peak area versus concentration were obtained over the concentration ranges 0-1.0 mM for anions (R=0.9991) and 0-0.5 mM for cations (R=0.9994). Detection limits calculated at S/N=3 ranged from 4.2 to 14.8 ppb for the anions and from 2.4 to 12.1 ppb for the cations. The reproducibility of retention times was 0.14-0.15% relative standard deviation (RSD) for anions and 0.18-0.31% for cations, and reproducibility of chromatographic peak areas was 1.22-1.75% RSD for anions and 1.81-2.10% for cations. The method was applied successfully to the simultaneous determination of anions and cations in aerosols transported from mainland China to central Japan, as determined by a meteorological satellite data analyzer.     

Solvent dependent dimercaptothiadiazole monolayers on gold electrode for the simultaneous determination of uric acid and ascorbic acid

Dimercaptothiadiazole compound, 2,5-dimercapto-1,3,4-thiadiazole (DMcT) forms ‘thin’ monolayers on Au electrode when it was adsorbed from methanol, ethanol or DMSO solutions while it forms ‘thick’ layers on Au electrode from an aqueous solution under identical experimental conditions. Thick DMcT layers formed from aqueous solution effectively blocks the redox reaction of couple in contrast to thin DMcT monolayers. The monolayer thickness did not vary when structurally related DMcT compounds, 5-methyl-1,3,4-thiadiazole-2-thiol or 5-amino-1,3,4-thiadiazole-2-thiol was adsorbed from aqueous and non-aqueous solutions. This indicates that the presence of two thiol groups in DMcT plays a crucial role in the formation of thick and thin DMcT layers on Au electrode when it was adsorbed from aqueous and non-aqueous solutions. Methanol, ethanol, or DMSO solution of DMcT is considered as strong acid because these solvents are able to deprotonate DMcT into DMcT⁻ and thus thin monolayers formed on Au electrode. The deprotonating ability of these solvents was further verified from the observed absorption spectrum characteristic of DMcT⁻ species. On the other hand, an aqueous solution of DMcT is less acidic due to weak deprotonation of DMcT by water and thus DMcT forms thick layer on Au electrode. Interestingly, thin DMcT monolayers formed from non-aqueous solvents separates the voltammetric signals of uric acid and ascorbic acid while thick DMcT layers formed from aqueous solution fails to separate them.     

Dehydrochlorination of vinylidene chloride-vinyl chloride copolymer by aqueous sodium or potassium hydroxide solutions under two-phase conditions

The reaction of solid copolymer of vinylidene chloride and vinyl chloride with aqueous sodium or potassium hydroxide solutions in the presence of quaternary ammonium or phosphonium salts as phase transfer catalysts gave dehydrochlorinated products with chlorine-substituted polyene structure. Among the catalysts used tetrapropylammonium bromide was the best and potassium hydroxide was more active than sodium hydroxide. The activity of quaternary ammonium salts was discussed in terms of hydrophile–lipophile balance. The effects of temperature and the concentration of the bases and catalysts were investigated to obtain the optimum reaction condition. Treatment of the polymer films and solutions in tetrahydrofuran with aqueous bases under two-phase conditions also produced dehydrochlorinated films and powders.     

A surfactant-assisted preparation of well dispersed rhodium nanoparticles within the mesopores of AlSBA-15: characterization and use in catalysis

Well dispersed and efficient Rh(0) hydrogenation catalysts were obtained by the reduction of Rh(III)-exchanged mesoporous aluminosilicates by sodium borohydride in the presence of N,N-dimethyl-N-cetyl-N-(2-hydroxyethyl) ammonium chloride.     

Simultaneous determination of inorganic anions and cations in explosive residues by ion chromatography

A non-suppressed ion chromatographic method by connecting anion-exchange and cation-exchange columns directly was developed for the separation and determination of five inorganic anions (sulfate, nitrate, chloride, nitrite, and chlorate) and three cations (sodium, ammonium, and potassium) simultaneously in explosive residues. The mobile phase was composed of 3.5mM phthalic acid with 2% acetonitrile and water at flow rate of 0.2 mL/min. Under the optimal conditions, the eight inorganic ions were completely separated and detected simultaneously within 16 min. The limits of detection (S/N=3) of the anions and cations were in the range of 50-100 microg/L and 150-320 microg/L, respectively, the linear correlation coefficients were 0.9941-0.9996, and the R.S.D. of retention time and peak area were 0.10-0.29% and 5.65-8.12%, respectively. The method was applied successfully to the analysis of the explosive samples with satisfactory results.     

Highly concentrated aqueous dispersions of graphene exfoliated by sodium taurodeoxycholate: dispersion behavior and potential application as a catalyst support for the oxygen-reduction reaction

A high-yielding exfoliation of graphene at high concentrations in aqueous solutions is critical for both fundamental study and future applications. Herein, we demonstrate the formation of stable aqueous dispersions of pristine graphene by using the surfactant sodium taurodeoxycholate under tip sonication at concentrations of up to 7.1 mg mL(-1). TEM showed that about 8% of the graphene flakes consisted of monolayers and 82% of the flakes consisted of less than five layers. The dispersions were stable regardless of freezing (-20 °C) or heat treatment (80 °C) for 24 h. The concentration could be significantly improved to about 12 mg mL(-1) by vacuum-evaporation of the dispersions at ambient temperature. The as-prepared graphene dispersions were readily cast into conductive films and were also processed to prepare Pt/graphene nanocomposites that were used as highly active electrocatalysts for the oxygen-reduction reaction.     

Study on hydration layers near nanoscale silica dispersed in aqueous solutions through viscosity measurement

On the basis of the Einstein theory of viscosity of dispersion, a parameter, termed as solvation factor, is presented to evaluate the solvation degree of nanoscale particles dispersed in a liquid in this work. The value of the parameter is obtained through the measurements of relative viscosity of the dispersions as a function of the volume fraction of dry particles. The solvation factor has been used to study the hydration layers near nanoscale silica particles dispersed in water and aqueous electrolyte (NaCl and CaCl2) solutions in this work. The experimental results have shown that a strong hydration indeed applied to the silica surfaces in aqueous solutions, leaving a large volume of hydration layers on the surfaces. Also, it has been found that the hydration of the nanoscale silica particles could be greatly enhanced if they were dispersed in aqueous NaCl or CaCl2 solutions, which might be attributed to that the hydrated cations (Na+ or Ca2+) bind onto the silica/ water interface and thus increase the volume of the hydration layers.     

Method of separating uranium from iron and thorium

Acid leaching of uranium deposits is not a selective process. Sulfuric acid solubilizes iron(III) and half or more of the thorium depending on the mineralog of this element. In uranium recovery by solvent extraction process, uranium is separated from iron by an organic phase consisting of 10 vol% tributylphosphate(TBP) in kerosine diluent. Provided that the aqueous phase is saturated with ammonium nitrate or made 4–5 M in nitric acid prior to extraction. Nitric acid or ammonium nitrate is added to the leach solution in order to obtain a uranyl nitrate product. Leach solutions containing thorium(IV) besides iron are treated in an analogous fashion. Uranium can be extracted away from thorium using 10 vol% TBP in kerosine diluent. The aqueous phase should be saturated with ammonium nitrate and the pH of the solution lowered to 0.5 with sufficient amount of sulfuric acid. In other words, the separation of uranium and thorium depends on the way the relative distributions of the two materials between aqueous solutions and TBP vary with sulfuric acid concentration. Thorium is later recovered from the waste leach liquor, after removal of sulfate ions. Uranium can be stripped from the organic phase by distilled water, and precipitated as ammonium diuranate.     

Monomeric metal aqua complexes in the interlayer space of montmorillonites as strong Lewis acid catalysts for heterogeneous carbon-carbon bond-forming reactions

Montmorillonite-enwrapped copper and scandium catalysts (Cu(2+)- and Sc(3+)-monts) were easily prepared by treating Na(+)-mont with the aqueous solution of the copper nitrate and scandium triflate, respectively. The resulting Cu(2+)- and Sc(3+)-monts showed outstanding catalytic activities for a variety of carbon-carbon bond-forming reactions, such as the Michael reaction, the Sakurai-Hosomi allylation, and the Diels-Alder reaction, under solvent-free or aqueous conditions. The remarkable activity of the mont catalysts is attributable to the negatively charged silicate layers that are capable of stabilizing metal cations. Furthermore, these catalysts were reusable without any appreciable loss in activity and selectivity. The Cu(2+)-mont-catalyzed Michael reaction proceeds via a ternary complex in which both the 1,3-dicarbonyl compound and the enone are coordinated to a Lewis acid Cu(2+) center.     

Ion Association and Solvation Behavior of Some 1-1 Electrolytes in 2-Ethoxyethanol Probed by a Conductometric Study

Precise measurements of the electrical conductances of solutions of potassium thiocyanate (KCNS), ammonium thiocyanate (NH₄CNS), sodium nitrate (NaNO₃) and ammonium nitrate (NH₄NO₃) in 2-ethoxyethanol (EE) at temperatures 35, 40, 45 and 50,^∘C are reported. The conductance data have been analyzed by the 1978 Fuoss conductance equation. A thermodynamic analysis of the ionic association processes has also been made and the Coulombic forces are found to play a major role in the association processes. The ionic contributions to the limiting equivalent conductances have been determined using the reference electrolyte method. Strong association was found for all these electrolytes in this solvent medium. The cations are found to be substantially solvated in 2-ethoxyethanol, whereas the anions appear to have only weak interaction with the solvent molecules.     

Preparation of nanodispersed titania using stabilized ammonium nitrate melts

An expedite one-step approach using simple precursors has been proposed to obtain metallic oxide compounds and exemplified by preparation of highly dispersed TiO₂. The technique consists in heating to 400-500 °C of molten ammonium nitrate stabilized with an organic nitrogen-containing compound (urea, melamine, ammonium oxalate) and containing dissolved metal salt precursor (TiOCl₂). The crystallites of the resulting TiO₂ demonstrated variable size and shape as a function of stabilizer used. Their activity in photocatalytic oxidation of formic acid also depends on the nature of the stabilizer. The catalysts as-prepared showed high photocatalytic performance, superior to that of the Degussa P25 reference. Nitrogen containing stabilizers play a double role of increasing the process safety and modifying the properties of the solid products.     

Measurement of inorganic acids with rotating ball inlet mass spectrometry

Using a new acid resistant inlet we have evaluated the use of rotating ball inlet mass spectrometry (ROBIN-MS) as a tool for the measurement of inorganic acids in aqueous solution. EI-spectra of sulfuric, sulfurous, nitric, perchloric, bromic, iodic and boric acids were recorded and interpreted with respect to preionization decomposition and electron impact fragmentation. With the exception of sulfuric acid the detection limits for these acids were in the order of 1 mM and the response times are in the order of 1 s. Sulfuric acid had a significantly higher detection limit and response time than the other acids. No mass spectrum of phosphoric acid could be detected. High concentrations of phosphoric acid reduced the signals of other acids. HCl formed by decomposition of perchloric acid caused a strong and slowly recovering decrease of the sensitivity of the mass spectrometer. Sodium sulfate or sodium nitrate in neutral solution did not yield any mass spectrum. The intensity of the sulfuric acid peak of acid solutions of sodium sulfate was measured at different molar ratios of sodium and sulfate. The results indicate that the evaporation of such samples leaves a remnant containing three molecules of sulfuric acid per sodium ion. Similar measurements on acid solutions of sodium nitrate indicate that the remnant contains one molecule of nitric acid per sodium ion.