Adsorption and Vibration of O on the Pt Stepped Surfaces

1 INTRODUCTION Atom adsorption on transition metal surfaces has attracted special attention as a basis for understand- ing the fundamental processes of oxidative cataly- sis. An oxygen-covered platinum surface for example, plays a central role in several important reactions, such as oxidation of carbon monoxide[1]. Moreover, the behavior of oxygen in the proximity of surface defects like kinks and steps is a central issue in understanding the chemisorption processes on ca- talytic surfaces…     

Theoretical Studies on Adsorption Sites and States of O and N on Ni（311）

The adsorption of O and N atoms on the Ni(311) surface was investigated by the 5-parameter Morse potential(5-MP) method in detail. For the O-Ni(311) system, there are three surface adsorption states and thefcc-3-fold site is metastable; the frequency of 75 meV[67 meV in high resolution electron energy loss spectroscopy(HREELS) experiment] is attributed to the vibration at the hcp-3-fold site. For the N-Ni(311) system, however, there are only two surface adsorption states(no surface adsorption state was calculated at fcc-3-fold site). In addition, subsurface states were predicted and all critical characteris-tics were obtained for the two systems.     

Theoretical Studies on the Stabilities and Hydrogen Bond Actions of （H2O）n Clusters

1 INTRODUCTION In the latest ten years, the structure and function of water clusters have captured the interest of chemists. One of the most important study objects in water cluster is to describe the behavior of water so- lution quantitatively at molecule level, which will pave the way for the solving of some environmental and other scientific problems, such as the formation of acid rain and nucleation mechanism of little water drop. Besides, weak interaction in water clusters could be al…     

DFT Study of Thiophene Adsorption on the Pd（111） and Pt（111） Surfaces

Thiophene adsorption on the(111) surfaces of Pd and Pt have been investigated by density functional theory.The results indicate that the adsorption at the hollow sites is the most stable.To our interest,the molecular plane of thiophene ring is distorted with C=C bond being elongated to 1.450  and C-C bond being shortened to 1.347 ,and the C-H bonds tilt 13.91～44.05o away from this plane.Furthermore,analysis on population and density of states verified the calculated adsorption geometries.Finally,charge analysis suggests that thiophene molecule is an electron acceptor,reflecting the interaction between the lone pair of sulfur and the d-orbitals of metal.     

Theoretical Study of N_2O Adsorption and Decomposition on the InN （0001） Surface

The adsorption and decomposition of N2O on the InN (0001) surface have been explored employing density functional theory method. To study the most favorable N2O adsorption model, ten typical adsorption cases (four for the parallel style and six for the vertical style) were proposed. The calculated results indicate that the parallel models are energetically preferred over the vertical models. The parallelly adsorbed N2O prefers to be dissociated on the surface, the dissociated O atom is combined at the fcc site, and the N-N piece is desorbed from the surface and forms N2 molecules. The comparison of the density of states of InN (0001) surface before and after N2O adsorption is analyzed in detail. Through the searching for transition state of decomposition reaction, a very low energy barrier of 45.0 KJ/mol is derived.     

Adsorption and Vibration of O Atoms on Fe Low-index and Fe （211） High-index Surfaces

IntroductionThe interaction of oxygen with iron in lowcoverageregimes is considered to be an important step in the for-mation of oxides in corrosion science and in Fisher-Tro-psch process for the synthesis of ammonia over the het-erogeneous catalysts[1]. …     

Theoretical Studies on Adsorption and Diffusion of Hydrogen Atom on Pd（311） and Ni（311） Stepped Surface

The adsorption and diffusion of hydrogen atom on open rough Pd(311) and Ni(311) stepped surface were investigated in detail using 5-parameter Morse Potential (5-MP for short) method. The results on theoretical studies indicate that only threefold adsorption states exist at low coverage, and fourfold states are annihilated on the top layer which become the diffusion channels between threefold adsorption states due to strong competition and repulsion between hydrogen adatoms.     

Synthesis and Crystal Structural Characterization of （NH＿4）＿5H＿3Mn＿3V＿（12）O＿（40）·15H＿2O

ＳｙｎｔｈｅｓｉｓａｎｄＣｒｙｓｔａｌＳｔｒｕｃｔｕｒａｌＣｈａｒａｃｔｅｒｉｚａｔｉｏｎｏｆ（ＮＨ＿４）＿５Ｈ＿３Ｍｎ＿３Ｖ＿（１２）Ｏ＿（４０）·１５Ｈ＿２ＯＷＡＮＧＺｕｏ－Ｐｉｎｇ;ＬＩＵＪｉｎｇ－ｆｕａｎｄＷＡＮＧＥｎ－ｂｏ（Ｄｅｐａｔｍｅｎ...     

Comparative Study of Hypophosphite H2PO2^- Adsorption on Ni（111） and Ag（111） Surfaces by DFT

Surface structures and electronic properties of hypophosphite H2PO2^- on Ni（111） and Ag（111） surfaces were investigated by means of density functional theory at B3LYP/6-31 ＋ ＋G（d,p） level. The most stable structure was that in which the H2PO2^- adsorbs with its two P--O bonds faced to the substrate surface. The results of the Mulliken population analysis showed that because of the subtle difference of electron configuration, the adsorption energy was larger on the Ni surface than on the Ag surface, and the amounts of both donation and back donation were larger on the Ni（111） surface than on the Ag（111） surface. There were more negative Mulliken charge transfer from H2PO2^- to substrate clusters on Ni surface than on Ag surface and more positive Mulliken charges on P atom in Ni4H2PO2^- than in Ag4H2PO2^-, which means that P atom in Ni4H2PO2^- is easily attacked by a nucleophile such as OH . Thus, H2PO2^- is more easily oxidated on Ni（111） surface than on Ag（111） suface. These results indicated that the silver surface is inactive for the oxidation reaction of the hypophosphite anion.     

二氧化钛(TiO2)表面能的理论研究

用密度泛函理论和虚拟原子轨道方法对二氧化钛-金红石(TiO2)(110)表面的表面能进行了理论计算. 结果表明, 二氧化钛的表面能与表面缺陷的百分率相关. 完整的表面具有最低的表面能, 表面能随着表面缺陷百分率的增大而升高, 这与自然环境下二氧化钛-金红石(TiO2)具有规整的(110)表面一致. 在光催化实验中利用二氧化钛表面的缺陷作催化剂需要考虑到表面的稳定性. 另一方面, 在完整的表面五配位Ti4+上填加氧原子与表面作用时, 表面能起初变化很小, 直到50%的五配位Ti4+被填充后表面能才开始升高.     

Adsorption of Large Organic Molecules on Clean and Hydroxylated Rutile TiO2(110) Surfaces

Behavior of large organic molecules equipped with spacer groups (Violet Landers, VL) on the TiO₂(110)‐(1×1) surfaces is investigated by means of high‐resolution scanning tunneling microscopy (STM). Two distinct adsorption geometries are observed. We demonstrate that the molecule adsorption morphology can be alternated by well‐controlled STM tip‐induced manipulation. It is used to probe the mobility of molecules and reveals locking in one of the analyzed adsorption sites, thus allow to enhance or reduce the mobility along the [001] direction. Field induced hydrogen desorption is used to perform lateral STM manipulation on a hydroxyl‐free surface, which provides insight into the influence of surface hydroxyl groups on the molecule behavior. The ability to image with submolecular resolution both the central board and the spacer groups of the VL molecule is demonstrated.     

Effects of Surface Defects on Adsorption of CO and Methyl Groups on Rutile TiO$_\text{2}$(110)

The interaction of reactants with catalysts has always been an important subject for catalytic reactions. As a promising catalyst with versatile applications, titania has been intensively studied for decades. In this work we have investigated the role of bridge bonded oxygen vacancy (O\begin{document}$_\textrm{v}$\end{document}) in methyl groups and carbon monoxide (CO) adsorption on rutile TiO\begin{document}$_2$\end{document}(110) (R-TiO\begin{document}$_2$\end{document}(110)) with the temperature programmed desorption technique. The results show a clear different tendency of the desorption of methyl groups adsorbed on bridge bonded oxygen (O\begin{document}$_\textrm{b}$\end{document}), and CO molecules on the five coordinate Ti\begin{document}$^{4+}$\end{document} sites (Ti\begin{document}$_{5\textrm{c}}$\end{document}) as the O\begin{document}$_\textrm{v}$\end{document} concentration changes, suggesting that the surface defects may have crucial influence on the absorption of species on different sites of R-TiO\begin{document}$_2$\end{document}(110).     

一氧化碳分子在Pt/t-ZrO2(101)表面的吸附性质

运用广义梯度密度泛函理论(GGA-PW91)结合周期平板模型方法,研究了CO分子在完整与Pt负载的四方ZrO2(101)表面的吸附行为.结果表明:表面第二层第二氧位和表面第二桥位分别为CO分子和Pt原子在完整ZrO2(101)表面的稳定吸附位,且覆盖度为0.25ML(monolayer)时均为稳定吸附构型,吸附能分别为56.2和352.7kJ·mol-1.CO分子在负载表面的稳定吸附模式为C-end吸附,吸附能为323.8kJ·mol-1.考察了CO分子在负载表面吸附前后的振动频率、态密度和轨道电荷布居分析,并与CO分子和Pt原子在ZrO2表面的结果进行比较.结果表明,C端吸附CO分子键长为0.1161nm,与自由的和吸附在ZrO2表面后的CO相应值(0.1141和0.1136nm)相比伸长.吸附后C―O键伸缩振动频率为2018cm-1,与自由CO分子相比发生红移;吸附后CO带部分正电荷,电子转移以Pt5dCO2π的π反馈机理占主导地位.     

氧原子在Pt(s)-[n(111)×(100)]型台阶面上的吸附和振动

应用原子和表面簇合物相互作用的5-参数Morse势(简称5-MP)方法系统地研究了氧-铂台阶面体系.理论结果表明:在Pt(s)-[n(111)×(100)]型台阶面上，氧原子吸附在台阶下的四重位，对应稳定吸附态β2；平台上靠近四重位的三重吸附态被湮灭，其它三重位对应吸附态β1；而且平台的长度对四重吸附态有影响.     

TiO2(110)面的弛豫结构及吸附O2的密度泛函研究

采用DFT／B3LYP方法研究了TiO2(110)的完整和氧缺陷表面的弛豫构型，并对 O2在氧缺陷表面的三种可能吸附构型进行了优化，计算了它们的吸附能、振动频率 和重叠布居．分析并预测了吸附后可能产生的物种．本文的计算结果与XPS，TPD和 ELS等实验吻合．     

PFOS在锐钛型TiO2表面吸附行为的理论研究

采用密度泛函理论(DFT)B3LYP方法对全氟辛烷磺酸(PFOS)在锐钛型TiO2表面的化学吸附和物理吸附行为进行了研究,其中化学吸附包含双齿双核(BB)和单齿单核(MM)在内的4种可能的吸附构型.吸附能(Eads)及反应吉布斯自由能(ΔGads)的计算结果表明,PFOS分子易于与TiO2表面发生氢键作用吸附;化学吸附表现为PFOS分子与TiO2表面的水分子(H2O)和羟基(—OH)反应,且与取代—OH相比,H2O取代相对更容易发生,其中,MM1构型(取代一个表面水分子)为化学吸附中的优势构型.PFOS在锐钛矿表面吸附的热力学稳定性和反应自发性顺序如下:H-Bonded(氢键吸附)>MM1(取代一个表面水分子)>BB1(取代两个表面水分子)>MM2(取代一个表面羟基)>BB2(取代一个表面水分子和一个表面羟基).成键结构分析表明,TiO2表面H2O/—OH官能团与PFOS上的磺酸基之间形成了中等强度的氢键;在化学吸附过程中,电荷从PFOS分子向TiO2表面发生转移,生成Ti—O—S化学键,电荷转移主要来自PFOS分子的O和F原子.     

基于第一性原理研究铱(111)和(100)表面的原子吸附（英文）

本文利用第一性原理密度泛函理论研究了九种不同的吸附原子在铱(Ir)的(111)和(100)表面上的吸附性质.探讨了Ir表面的功能化,因此吸附能、稳定的结构、态密度和磁矩,这将为进一步研究其在催化和其他表面应用中的可能展现的功能提供重要信息.研究表明,三/四重空位点是Ir(111)/(100)表面最有利的吸附位点.通过对大范围的覆盖率(从0.04到1个单层)的研究,表明吸附原子的吸附能具有很强的覆盖率依赖性.吸附能随着覆盖率的增加而增加,这意味着吸附物之间存在排斥相互作用.吸附原子和衬底电子态之间的强杂化会影响吸附性质,同时吸附原子的磁矩被抑制.通过Bader电荷分析,揭示了吸附原子和衬底之间的大量电荷转移.与(111)表面的结合相比,(100)表面吸附原子的结合更强.     

The Adsorption and Photocatalytic Decomposition of Citric Acid on Pt/TiO_2

The adsorption and photocatalutic decomposition of citric acid on both Pt/TiO2 powder and n-TiO2 single crystal electrode were studied in aqueous solutions of various pH. It was found that citrate ions were chemisorbed on TiO2, which could increase the interfacial capacity and the filling factor of photocurrent-potential curves. The quantity of adsorption, slope of mott-Shottky plot and the rate of photocatalytic decomposition of citric acid were found to depend strongly on pH of solution. The phot ocatalytic decomposition of citric acid was discussed in light of its adsorption on TiO2.     

甲酸和乙酸在二氧化锆表面化学吸附的光电子能谱研究

利用Ｘ射线光电子能谱（ＸＰＳ）和紫外光电子能谱（ＵＰＳ）等表面分析方法，表征了甲酸和乙酸在ＺｒＯ２表面 的反应和吸附态。室温下，甲酸在ＺｒＯ２表面以ＨＣＯＯ－（ａ）的形态被吸附，部分ＨＣＯＯ－（ａ）进一步分解产生Ｏ~(２－)（ａ）， ＨＣＯ（ａ）和ＣＨ_ｘ（ａ），加热有利于表面甲酸根的分解。乙酸在ＺｒＯ２表面的反应与甲酸相似。甲酸和乙酸在ＺｒＯ２表面 的吸附实质就是表面酸碱中和反应。