Electrochemical grafting of an aryl fluorosulfonimide electrolyte onto glassy carbon

Robust bonded layers of an aromatic fluorosulfonimide electrolyte were created on glassy carbon disk and plate electrodes by electroreduction of a new fluorosulfonimide aryl diazonium zwitterion. Formation of the bonded layer was confirmed by XPS of the modified surfaces and also by the effect of the bound layer on reduction/oxidation of redox-active probe molecules. Surface coverage in the monolayer range was achieved. Counterions for as-formed layers were initially tetra-alkylammonium ions from the coating electrolyte but could subsequently be exchanged for other cations by exposure to salt solutions. The bonded layers are very stable with respect to treatment with solvents (water and/or acetonitrile), dry heat (120 degrees C), and hot acid (triflic acid, 80 degrees C, neat and containing 50 wt % water); however, they are unstable with respect to electro-oxidative scanning in aqueous electrolyte solutions.     

Prediction of interfacial tension between an organic solvent and aqueous solutions of mixed-electrolytes

The recently proposed approach for representing and predicting surface tension of aqueous electrolyte solutions [Chem. Eng. Sci. 56 (2001) 2879] is extended to the prediction of interfacial tension between an organic solvent and aqueous multi-electrolyte solutions. The method of Meissner was adopted in all the calculations of activity coefficient of electrolytes. Model parameters were determined by correlating interfacial tensions reported in the literature for 11 single electrolytes, including 10 inorganic salts and one inorganic acid at isothermal conditions. The correlation yielded an overall average absolute percentage deviation (AAPD) of 0.42. Using these model parameters, the proposed approach was successfully applied to the prediction of interfacial tensions available in the literature for aqueous FeCl₃–HCl, NiCl₂–FeCl₃–HCl and NiCl₂–CoCl₂–FeCl₃–HCl solutions with an AAPD of 5.73.     

Solvent dependent dimercaptothiadiazole monolayers on gold electrode for the simultaneous determination of uric acid and ascorbic acid

Dimercaptothiadiazole compound, 2,5-dimercapto-1,3,4-thiadiazole (DMcT) forms ‘thin’ monolayers on Au electrode when it was adsorbed from methanol, ethanol or DMSO solutions while it forms ‘thick’ layers on Au electrode from an aqueous solution under identical experimental conditions. Thick DMcT layers formed from aqueous solution effectively blocks the redox reaction of couple in contrast to thin DMcT monolayers. The monolayer thickness did not vary when structurally related DMcT compounds, 5-methyl-1,3,4-thiadiazole-2-thiol or 5-amino-1,3,4-thiadiazole-2-thiol was adsorbed from aqueous and non-aqueous solutions. This indicates that the presence of two thiol groups in DMcT plays a crucial role in the formation of thick and thin DMcT layers on Au electrode when it was adsorbed from aqueous and non-aqueous solutions. Methanol, ethanol, or DMSO solution of DMcT is considered as strong acid because these solvents are able to deprotonate DMcT into DMcT⁻ and thus thin monolayers formed on Au electrode. The deprotonating ability of these solvents was further verified from the observed absorption spectrum characteristic of DMcT⁻ species. On the other hand, an aqueous solution of DMcT is less acidic due to weak deprotonation of DMcT by water and thus DMcT forms thick layer on Au electrode. Interestingly, thin DMcT monolayers formed from non-aqueous solvents separates the voltammetric signals of uric acid and ascorbic acid while thick DMcT layers formed from aqueous solution fails to separate them.     

Thin‐Layer Cyclic Voltammetric and Scanning Electrochemical Microscopic Study of Antioxidant Activity of Ascorbic Acid at Liquid/Liquid Interface

An electron transfer reaction between ascorbic acid (H₂A) in an aqueous solution and oxidizing agent in an organic solution immiscible with water has been studied by thin‐layer cyclic voltammetry (TLCV) for charge transfer at the interface between two immiscible electrolyte solutions (ITIES). As an antioxidant, H₂A provide electrons through the aqueous/organic interface to reduce Fc⁺ and the procedure has been proved to be a one electron process again. In this work, the first combination of TLCV and scanning electrochemical microscopy (SECM) was achieved and showed a reasonable agreement between the results from the two different approaches. Otherwise, lower concentration ratios Kr of aqueous to organic reactants was adopted, which is given as evidence to the proposed procedure of Barker.     

Stable sensor layers self-assembled onto surfaces using azobenzene-containing polyelectrolytes.

Polyelectrolytes functionalized with photoisomerizable azobenzene chromophores were multi-layered onto inorganic and metal surfaces, by the repeated adsorption from dilute aqueous solution, alternating between oppositely charged polymers. These layer-by-layer ionically self-assembled thin films were investigated for their suitability as sensor host materials with respect to the criteria of control over physical layer properties, versatility to different substrates and adsorption geometries, and stability of the formed layers to heat, solvent, and sonication. Layer thickness was found to be controllable between 5 A and 500 nm by varying the total number of layers deposited, from a single monolayer to 1000 layers. Control over individual layer thickness was achieved by varying the pH of the adsorption solutions. This multi-layer self-assembly was demonstrated to be suitable for a wide range of metal and inorganic substrates, and achievable with surfaces of high curvature (r = 50 nm), and confined geometry. The deposited layers exhibited good stability to desorption in a range of organic solvents, aqueous temperatures to 100 degrees C, and cleaning protocols such as sonication. The laser-induced geometric isomerization of the azobenzene chromophores was shown to be strongly dependent on aqueous solution properties, demonstrating an application as a hydroxide ion sensor in highly alkaline media.     

Extraction equilibrium of indium(III) from nitric acid solutions by di(2-ethylhexyl)phosphoric acid dissolved in kerosene

The extraction equilibrium of indium(III) from a nitric acid solution using di(2-ethylhexyl) phosphoric acid (D2EHPA) as an acidic extractant of organophosphorus compounds dissolved in kerosene was studied. By graphical and numerical analysis, the compositions of indium-D2EHPA complexes in organic phase and stoichiometry of the extraction reaction were examined. Nitric acid solutions with various indium concentrations at 25 °C were used to obtain the equilibrium constant of InR? in the organic phase. The experimental results showed that the extraction distribution ratios of indium(III) between the organic phase and the aqueous solution increased when either the pH value of the aqueous solution and/or the concentration of the organic phase extractant increased. Finally, the recovery efficiency of indium(III) in nitric acid was measured.     

Studies on the extraction of chromium(VI) by ketones

A study of the extraction of chromium(VI) from aqueous media by ketones was made. Extraction of chromium was found to be most efficient from aqueous hydrochloric acid solutions. A mechanism for the extraction of chromium(VI) from aqueous hydrochloric acid solutions by methyl isobutyl ketone is proposed involving the formation of a receptor in the organic phase, the exchange of the chloride ion of the receptor for the anionic chromium(VI) species of the aqueous phase, and the solvation of the extracted chromium species. The differences in the abilities of various ketones to extract chromium(VI) from aqueous hydrochloric acid solutions, and the differences in the extraction of chromium (VI) from various aqueous acids by methyl isobutyl ketone are attributed to the differences in the formation of receptors.     

The ionization of perchloric and hydrofluoric acids in aqueous solution

Cyclical bifurcated hydrogen bonded structures are proposed for aqueous solutions of hydrofluoric acid and for the bifluoride ion which are consistent with the spectral data. The structure proposed for HF is also applicable to solutions in organic solvents. Raman spectra of tetramethylguanidinium perchlorate suggest that the corresponding Raman spectra of perchloric acid solutions may not be interpreted in terms of a completely dissociated acid. Other evidence including activity coefficient, heat capacity and partial molal volume data suggest that there is some association in relatively dilute perchloric acid solutions between the perchlorate ion and the hydrated proton. This association decreases in concentrated aqueous solutions.     

Enhanced copper surface protection in aqueous solutions containing short-chain alkanoic acid potassium salts

The ability of dissolved potassium monocarboxylate salts to produce surface passivation and to inhibit aqueous corrosion of copper was studied. The electrochemical measurements indicate that the inhibiting efficiency of these compounds, with a general formula Cn-1H2n-1COOK or CnK (n=3...12), is dependent on the hydrocarbon chain length. The inhibiting efficiency was higher for a longer hydrocarbon chain of n-alkanoic acid. The degree of copper protection was found to increase with an increase in n-alkanoic acid potassium salt concentration; the optimum concentration of potassium dodecanoate (C12K) in sulfate solutions was found to be 0.07 M. The protective layers formed at the copper surface subsequent to exposure in various n-alkanoic acid potassium salt solutions were characterized by contact angle measurements, electrochemical impedance spectroscopy, X-ray photoelectron spectroscopy, and Fourier transform infrared reflection spectroscopy. Pronounced copper protection was attributed to the growth of a protective film on the copper surface, containing both copper oxides and copper carboxylate compounds. It is suggested that the organic molecules enhance copper protection by covering copper oxides with a thin and dense organic layer, which prevents water molecules or aggressive anions from interacting with the copper surface.     

Chromatographic behaviour of alkaloids on thin layers of cation exchangers. II. Alginic acid, Rexyn 102, Dowex 50-X4 and CMCNa.

The chromatographic behaviour of 48 alkaloids on cation exchangers with cellulose, paraffin and polystyrene matrices in both the acid and sodium salt forms has been investigated. Water-organic solvent mixtures, aqueous buffer solutions and organic and mineral acid solutions in both water and in aqueous-organic solvents have been used as eluents. The retention mechanisms of these compounds on alginic acid, Rexyn 102 (Hplus) and Dowex 50-X4 (Hplus) thin layers are discussed. Interesting separations of the alkaloids were carried out on alginic acid and Rexyn 102 (Hplus).     

Isolation of niobium,tantalum, and titanium complex fluoride salts with alkali metal cations

Fluoride and oxofluoride salts of niobium, tantalum, and titanium were isolated. They precipitated from aqueous solutions and upon washing of organic extracts with aqueous solutions of ammonium, potassium, and sodium salts. The compositions of the isolated compounds were studied. Different compositions were established for the niobium salts that precipitated upon the dissolution of unwashed niobium hydroxide in hydrofluoric acid under the atmospheric pressure, in an autoclave, and upon addition of sodium, potassium, and ammonium salts to purely fluoride solutions of niobium, as well as for the tantalum ammonium and sodium salts isolated from aqueous and organic solutions. The data obtained can be used for the synthesis of niobium, tantalum, and titanium complex fluoride salts with various compositions.     

The investigation of the solvent extraction of molybdenum from concentrated solution of sulphuric acid

The solvent extraction of molybdenum(VI) from sulphuric acid solutions with di-(2-ethylhexyl)-phosphoric acid (HDEHP) and monododecylphosphoric acid (HDDP) in n-heptane has been studied (a) as a function of the concentration of sulphuric acid, molybdenum and the extractant; (b) in the presence of copper and zinc in the aqueous phase and (c) in the presence of tri-n-butylphosphate (TBP) in the organic phase. The distribution of the sulphuric acid between aqueous and organic phase has also been studied.     

Separation of Uranium(VI) by Extraction with Dibutylditiophosphoric Acid

The extraction of uranium(VI) from aqueous solutions with dibutylditiophosphoric acid in organic solvents was studied. The influence of different factors as pH of the aqueous phase, extractant concentration and nature of solvent was investigated in order to find the optimum conditions for separation of metal from aqueous nitrate solutions. The effect of neutral donor extractants was also searched and the efficiency of the extraction was calculated.     

Covalently attached sandwich structure from colloidal particles and diazoresin

A covalently attached sandwich structure between layers and particles has been fabricated from z.sbnd;COOH-containing copolymer latex particles and z.sbnd;N(2)(+)-containing polymers by self-assembly combined with a UV irradiation technique. The ionic bonds involving the layers and particles change to covalent bonds under UV irradiation and the sandwich structure become very stable toward polar organic solvents and electrolyte aqueous solutions.     

Group preconcentration of ions from acid aqueous solutions with a low-melting extractant

A possibility of the analytical application of a low-melting extractant, antipyrinium acetylsalicylate, to the extraction of a number of ions from acid aqueous solutions is studied. The distribution of Al, As, Cd, Co, Cr, Cu, Fe, Mg, Mn, Mo, Ni, Pb, Sb, Sn, Ti, V, and Zn ions between the aqueous solution and an organic extractant is studied by atomic emission spectrometry. The efficiency of ion extraction from acid solutions with a low-melting flux of antipyrinium acetylsalicylate is calculated. It is shown that single extraction with an extractant flux ensures the efficient extraction of Fe, Mo, Sn, and Ti from the water phase of the analyzed solution to the flux. The introduction of chloride ions into the analyzed acid aqueous solution significantly increases the efficiency of the group preconcentration of ions by the ion-exchange mechanism.     

Nickel and strontium nitrates as modifiers for the determination of selenium in wine by Zeeman electrothermal atomic absorption spectrometry

A mixed matrix modifier of nickel and strontium nitrates was used as a chemical modifier for the determination of selenium in wines by Zeeman electrothermal atomic absorption spectrometry. Wine samples were heated on a boiling water bath with small amounts of nitric acid and hydrogen peroxide. For complete elimination of interference, especially from sulfates and phosphates, selenium is complexed with ammonium pyrolidinedithiocarbamate (APDTC), extracted into methyl isobutyl ketone (MIBK), and measured by ETAAS. The graphite furnace temperature program was optimized for both aqueous and organic solutions. Pyrolysis temperatures of 1300 degrees C and 800 degrees C were chosen for aqueous and organic solutions, respectively; 2700 degrees C and 2100 degrees C were used as optimum atomization temperatures for aqueous and organic solutions, respectively. The optimum modifier mass established is markedly lower than those presented in the literature. The platform atomization ensures pretreatment stabilization up to 1100 degrees C and 1600 degrees C, respectively, for organic and aqueous selenium solutions. The procedure was verified by the method of standard addition. The investigated wine samples originated from the different regions of the Republic of Macedonia. The selenium concentration varied from not detectable to 0.93 microg L(-1).     

Enhanced Emission of Silver Nanoclusters Through Quantitative Phase Transfer

Silver nanoclusters composed of only a few metal atoms present appealing properties such as fluorescence. We have previously reported on aqueous solutions of this fluorophore using poly(methacrylic acid) as scaffold and their sensing properties. Here we report on the preparation of organic solutions of fluorescent silver nanoclusters by quantitative transfer from aqueous solution to an immiscible organic solvent. The fluorescent silver nanoclusters in the organic phase present enhanced emission properties and increased purity, which may expand the range of applications of this promising fluorophore.     

Effect of copolymer composition on interpolymer complex formation of (co)poly(vinyl ether)s with poly(acrylic acid) in aqueous and organic solutions

The complex formation between vinyl ether of poly(ethylene glycol‐co‐vinyl butyl ether) with poly(acrylic acid) has been considered in aqueous and isopropanol solutions. The effect of copolymer composition on the complex formation process was clarified. It has been shown that the incorporation of hydrophobic fragments into macromolecules enhances the hydrophobic stabilization of polycomplexes in aqueous solutions. In organic media this effect disappears. The stability of polycomplexes formed both in aqueous and in organic solutions in respect to the addition of dimethylformamide has been studied.     

Modeling of diffusive transport of benzoic acid through a liquid membrane

A model of diffusive transport of benzoic acid through a liquid membrane (LM) separating two aqueous solutions, based on diffusion layers and the assumption of a steady state, has been developed and tested using experimental results. It has been found that a model with the apparent partition coefficient dependent on the concentration is able to describe the time dependence of acid concentration in LM with and without a maximum on that dependence. The quality of the model fit with the single apparent diffusion coefficient of benzoic acid is the same as the one which takes into account the diffusion of benzoic acid in different forms (undissociated and dissociated form in aqueous phase, monomer and dimer in organic phase); however, in the second case, the model becomes overparameterized. Assuming that the partition and diffusion coefficients are constant, the diffusion layer model corresponds to the model of reversible consecutive reactions. Analytical solution for such case is given. Apart from the partition equilibrium, also kinetics of partitioning was considered. It was shown that in some basic situations both cases yield identical results.     

Oxidation of ascorbate and ascorbic acid at the aqueous|organic solution interface

An electron transfer reaction between ascorbate in an aqueous solution and oxidizing agents in an organic solution immiscible with water has been studied for the first time by polarography for charge transfer at the interface between two immiscible electrolyte solutions. A reversible electron transfer polarogram at the aqueous|organic solution interface could be observed when teterachlorobenzoquinone, dibromobenzoquinone and Meldola's Blue were used as oxidizing agents in the organic solution. The oxidation reaction of ascorbate at the aqueous|organic interface was discussed comparing with the reactions at the ordinary electrodes and in homogeneous solutions. The half-wave potentials of electron transfer polarograms at the aqueous|nitrobenzene interface were applied to evaluate the formal redox potential of ascorbate/ascorbate free radical.