Adsorption and controlled release of Chlortetracycline HCl by using multifunctional polymeric hydrogels

Adsorption and controlled release of Chlortetracycline HCl to and from multifunctional polymeric materials (HEMA/MAA) hydrogels were investigated. P(HEMA/MAA) hydrogels were synthesized by gamma radiation-induced copolymerization of 2-hydroxyethylmethacrylate (HEMA) and methacrylic acid (MAA) in aqueous solution. The influence of copolymer composition and pH value of the surrounding medium on the type of water diffusion into the glassy polymer were discussed. Drug, Chlortetracycline HCl containing hydrogels, with different drug concentration to polymer ratios, was loaded by direct adsorption method. The influence of MAA content in the gel on the adsorption capacities of hydrogel was studied. Chlortetracycline HCl adsorption capacity of hydrogels was found to increase from 8 to 138 mg Chlortetracycline HCl per gram dry gel with increasing amount of MAA in the gel system and drug concentration. The effect of pH on the releasing behavior of Chlortetracycline HCl from gel matrix was investigated. In vitro drug release studies in different buffer solutions show that the basic parameters affecting the drug release behavior of hydrogel are the pH of the solution and MAA content of hydrogel.     

Synthesis of poly (acrylamide-co-aconitic acid) adsorbents by gamma-irradiation,characterization, adsorption studies and application for cationic dyes removal

In this study, acrylamide (AAm)/aconitic acid (ACA) copolymers were prepared with two different mol% of aconitic acid 4%, 17% and were irradiated with gamma irradiation at different irradiation doses (4 - 25kGy). The percent yield was assigned by gravimetrical method. The effect of irradiation dose, pH and involved amounts of monomers (AAm/ACA) in hydrogels on swelling properties were investigated. The conversion of monomers to hydrogels was 100% at 25kGy. Poly(acrylamide-co-aconitic acid) P(AAm/ACA) hydrogels have been used for the adsorption of some aqueous solutions of dyes such as Methylene Blue (MB) and Safranine-O (S). The hydrogels were swollen in distilled water at pH 3, 5, 7, 8 and in aqueous solutions of dyes. The initial swelling rates of hydrogels are increased by increasing of pH. The effects of concentration of the aqueous solutions of dye and hydrogel composition on the adsorption were investigated. The adsorption is increased and changed depending on the structure of dye and composition of hydrogel.     

Adsorption of Apollo reactive dyes on poly(N,N dimethylamino ethylmethacrylate) hydrogels

Poly(N,N-dimethylamino ethylmethacrylate) [P(DMAEMA)] hydrogels were prepared by irradiating the ternary mixtures of dimethylamino ethylmethacrylate (DMAEMA)/ethyleneglycol dimethacrylate (EGDMA)/water (H₂O) by γ-rays at ambient temperature. The swelling of four types of DMAEMA hydrogels in distilled water is higher than the swelling of these hydrogels in dye solutions. The value of equilibrium swelling of P(DMAEMA)1 hydrogel was 338% at pH 7.0 in distilled water, while it was 325% and 326% at pH 7.0 in Apollofix Red (AR) and Apollofix Yellow (AY) solutions, respectively. The adsorption capacity of P(DMAEMA)1 hydrogel was found to increase from 85 to 131 mg for AR g⁻¹ dry gel and from 58 to 111 mg for AY g⁻¹ dry gel with decreasing pH of the dye solutions.     

Preparation and Characterization of Poly(N‐Vinylpyrrolidone‐co‐Methacrylic Acid) Hydrogels

In this study, N‐vinylpyrrolidone (VP)/methacrylic acid (MAA) copolymers have been prepared at three different mole percents, the methacrylic acid composition being around 5, 10, 15%. MAA and VP monomer mixtures have been irradiated in ⁶⁰Co‐γ source at different irradiation doses and percent conversions have been determined gravimetrically. ～80% conversion of monomers into hydrogels were performed at 3.4 kGy irradiation dose. These hydrogels were swollen in distilled water at pH 4.0, 7.0, and 9.0. P(VP/MAA) hydrogel which contains 5% methacrylic acid showed the maximum % swelling at pH 9.0 in water. Diffusion of water was found to be of non‐Fickian character. Diffusion coefficients of water in P(VP/MAA) hydrogels were calculated. Initial swelling rates of P(VP/MAA) hydrogels increased with increasing pH and MAA content in hydrogels. Swelling kinetics of P(VP/MAA) hydrogels was found to be of second order. Thermal behavior of PMAA, PVP and P(VP/MAA) hydrogel were investigated by thermal analysis. P(VP/MAA) hydrogel gained new thermal properties and the temperature for maximum weight loss and temperature for half‐life of P(VP/MAA) hydrogel were determined.     

Removal of cationic dyes by poly(acrylamide-co-acrylic acid) hydrogels in aqueous solutions

Poly(acrylamide-co-acrylic acid (poly(AAm-co-AAc)) hydrogels prepared by irradiating with γ-radiation were used in experiments on swelling, diffusion, and uptake of some cationic dyes such as Safranine-O (SO) and Magenta (M). Poly(AAm-co-AAc) hydrogels irradiated at 8.0 kGy have been used for swelling and diffusion studies in water and cationic dye solutions. The maximum swellings in water, and SO, and M solutions observed are 2700%, 3500%, and 4000%, respectively. Diffusions of water and cationic dyes within hydrogels have been found to be non-Fickian in character. Adsorption of the cationic dyes onto poly(AAm-co-AAc) hydrogels is studied by the batch adsorption technique. The adsorption type was found Langmuir type in the Giles classification system. The moles of adsorbed dye for SO and M per repeating unit in hydrogel (binding ratio, r) have been calculated as 3834×10⁻⁶ and 1323×10⁻⁶, respectively. These results show that poly(AAm-co-AAc) hydrogels can be used as adsorbent for water pollutants such as cationic dyes.     

Recovery and pre-concentration of gold onto poly((N-(Hydroxymethyl)methacrylamide)–1-allyl-2-thiourea) hydrogels synthesized by gamma radiation

Poly((N-(Hydroxymethyl)methacrylamide)–1-allyl-2-thiourea) hydrogels, Poly(NHMMA–ATU), were synthesized by gamma radiation using ⁶⁰Co γ source at different irradiation doses and different ATU content in the irradiated monomer mixture. The swellability of the synthesized hydrogels was changed by irradiation doses and by the content of ATU in the irradiated mixture. These hydrogels were used for the specific gold recovery and pre-concentration from single gold ion solutions and from different natural samples. It has been observed that gold adsorption capacity onto the hydrogels was high at low pHs and reached maximum value at pH = 0.5. Adsorption capacity of the hydrogels for gold at pH = 0.5 was found to be about 698 mg g^− 1 dry hydrogels. Adsorption equilibrium time of gold ions onto the hydrogels was found to be very short and also these hydrogels were showed extremely high selectivity to the gold ions in acidic media when the concentration of the other metal ions were extremely higher than gold. Because of the high specificity of these hydrogels to gold beside the other metal ions at low pHs, all matrix effects were easily eliminated adsorbing gold onto the hydrogels and desorbing into 3 M HCl solution containing 0.8 M thiourea. These hydrogels were found to be highly open pore size. This property of the hydrogels make them attractive due to high adsorption capacity of gold ions on/in the hydrogels penetrating inside and react to all functional groups in the interior surface of the hydrogels.     

γ-irradiated chitosan-polyvinyl pyrrolidone hydrogels as pH-sensitive protein delivery system

The effects of pH of the buffer solution and the composition of the hydrogel system on the bovine serum albumin (BSA) adsorption capacity of chitosan (CS)–polyvinyl pyrrolidone (PVP) (CSPVP) hydrogels and release of BSA were investigated. Poly-electrolyte CSPVP hydrogels with different compositions were prepared by irradiating CS/PVP/water mixtures with γ-rays at ambient temperature. The adsorption capacity of hydrogels was found to increase from 0 to 350 mg BSA/g dry gel, by changing external stimuli and hydrogel composition. The adsorption of BSA within CSPVP hydrogels increased with increase in CS content in the hydrogels. When the irradiation doses of hydrogel increased, the adsorption of BSA decreased. The maximum adsorption of BSA was observed at pH 5. A significant amount of the adsorbed BSA (up to 95%) was eluted in the phosphate medium containing 0.1 M NaCl at pH 7.4.     

Radiation synthesis of superabsorbent polyethylene oxide/tragacanth hydrogel

A new superabsorbent hydrogel has been prepared from tragacanth and polyethylene oxide (PEO) by gamma radiation at room temperature. Tragacanth solutions with different concentrations (1%, 3% and 5%) have been blended with 5% aqueous solution of PEO at a ratio of 1:1 and irradiated at doses 5–20 kGy. The properties of the prepared composite hydrogels were evaluated in terms of the gel fraction and the swelling behavior. An unexpected growth of the gel fraction was observed in PEO/tragacanth hydrogels irradiated at 5 kGy. Incorporation of 5% tragacanth into the aqueous PEO increased significantly the swelling percent of the hydrogels to more than 14,000% and thus makes it a superabsorbent material.     

Synthesis of comb type and semi-interpenetrating networks of acryloyl-l-proline methyl ester and poly (acrylic acid) for Cu (II) immobilization

Graft copolymer hydrogels and semi-interpenetrating networks (s-IPN) of acryloyl-l-proline methyl ester (A-ProOMe) and poly (acrylic acid) (PAAc) were synthesized in methanol solutions, by ionizing radiation (γ rays from a Co⁶⁰ source at room temperature). These systems are thermo and pH-sensitive and the pH sensitivity increases from acidic to basic solutions. The Lower Critical Solution Temperature (LCST), due to presence of poly (acryloyl-l-proline methyl ester) (PA-ProOMe) has been found between 18 and 20 °C and an unexpected Upper Critical Solution Temperature (UCST) due to poly acrylic acid (PAAc) has been found between 21 and 22 °C. Preliminary studies on the immobilization of Cu²⁺ for both hydrogels were done at several pH values at room temperature. Other techniques employed to characterize the comb type hydrogels and sIPN included scanning electronic microscopy (SEM) and infrared (FTIR-ATR).     

Swelling properties of pH‐responsive hydrophobically modified hydrogels of poly(methacrylic acid‐co‐diallylammonium salt) in aqueous solution

Using diallylmethyl alkyl ammonium salts (CCX) (X is alkyl's chain length, represents 12, 14, 16, and 18, respectively) as a comonomer of methacrylic (MAA), hydrophobically modified hydrogels of poly diallylmethyl alkyl ammonium salts‐methacrylic acid (PCCX‐MAA) were prepared by free radical copolymerization in aqueous solution. The synthetic conditions, such as dosage of cross‐linking agent, reaction concentration and length of alkyl chain were studied in detail. Results indicated that the swelling degree of hydrogels was decreased with dosage of cross‐linking agent, or monomer concentration increased at different pH. Incorporation of the different length of alkyl chain hydrophobic CCX units on PMAA chains by random distribution can change reswelling kinetics. The required time for reaching equilibrium swelling state was longest for PCC16‐MAA. Copyright © 2011 John Wiley & Sons, Ltd.     

Kinetics and isotherm studies of methyl orange adsorption by a highly recyclable immobilized polyaniline on a glass plate

Immobilized polyaniline on glass plates (PANI/glass) and its powder form were compared for the adsorption of methyl orange (MO) dye from aqueous solutions. The effects of operational parameters such as pH, sorbent dosage, initial concentration, contact time, aeration rate and the thermodynamics of the uptake of MO had been exhaustively evaluated. The maximum adsorption capacity (q_max) for PANI/glass and PANI powder was 93 and 147 mg g⁻¹, respectively. In addition, pseudo-second order model was the best fitted kinetic model for both systems, suggesting that the rate-limiting step may be chemisorptions. The obtained negative values of free energy and enthalpy indicated the adsorption process was spontaneous and exothermic. In contrast to PANI powder, PANI/glass yielded negative entropy. Photocatalytic regeneration of used PANI/glass was found to be highly effective where the desorbed MO was completely mineralized. This study showed that immobilized PANI offered the unique advantage of convenient use and reuse over an extended period of applications.     

Adsorption of methyl orange on nanoparticles of a synthetic zeolite NaA/CuO

CuO supported on an NaA zeolite (CuO/NaA) was prepared with an NaA zeolite through the ion-exchange (CuO/NaA) method. The morphology and the physicochemical properties of the prepared samples were investigated by XRD, MEB, and EDS. The various parameters, such as contact time, catalyst dose, initial dye concentration, initial pH, and temperature, influencing the adsorption of methyl orange (MO) were optimized. The MO adsorption equilibrium was reached after 240 min of contact time. Removal of MO is better at neutral pH than in acidic and alkaline solutions. Among the tested models, the equilibrium adsorption data are well fitted by the Langmuir isotherm. The adsorption kinetics is best described by the pseudo-second-order model. The evaluation of the thermodynamic parameters, i.e. ΔG^o, ΔH^o, and ΔS^o, revealed that MO adsorption was spontaneous, while the activation energy (20.98 kJ/mol) indicates a physical adsorption. The photodegradation of MO decreased from 100 mg/L down to 2 mg/L when the solution is exposed to visible light.     

Synthesis and properties of biodegradable thermo- and pH-sensitive poly[(N-isopropylacrylamide)-co-(methacrylic acid)] hydrogels

Thermo- and pH-sensitive hydrogels were synthesized via the copolymerization of N-isopropylacrylamide (NIPAAm) and methacrylic acid (MAA) crosslinked with a biodegradable PEG-co-PCL macromolecular crosslinker under UV irradiation. Swelling measurements showed that temperature and pH sensitivity of the resultant hydrogels were highly dependent on the composition of the hydrogels as well as temperature and pH of the local medium. The pH and temperature dependence of the hydrogels displayed good reversibility. The hydrolytic degradation studies showed that the degradation rate of the hydrogels increased with the increasing content of MAA introduced in the hydrogels in pH 7.4 PBS solutions at 37 °C. The study on the release of BSA indicated that the release rate of BSA was higher at pH 7.4 than at pH 2.0, and increased with the increase of the MAA content in the hydrogels in pH 7.4 PBS solutions at 37 °C. These hydrogel materials are desirable for potential applications as smart drug delivery systems.     

Sulfathiazole-based novel UV-cured hydrogel sorbents for mercury removal from aqueous solutions

Sulfathiazole-based novel hydrogel sorbents P(Sulti/hydroxyethyl methacrylate (HEMA)/acrylic acid (AAc)) were prepared by UV irradiation and used for the removal of mercury(II) ion from aqueous media. Hydrogels have been characterized by SEM and thermogravimetric analysis (TGA) techniques. The influence of the uptake conditions was investigated; maximum Hg(II) ion adsorption capacity obtained was 13.46±1.15 mg g⁻¹ at pH 5.0. The hydrogels were tested several times without loss of adsorption capacity. The selectivity of the hydrogel towards to Hg(II), Cd(II) and Zn(II) ions tested was Hg>Cd>Zn.     

Synthesis and characterization of biodegradable pH-sensitive hydrogels based on poly(?-caprolactone), methacrylic acid, and poly(ethylene glycol)

In this work, a novel biodegradable pH-sensitive hydrogel based on poly(?-caprolactone) (PCL), methoxpoly(ethylene glycol) (MPEG) and methacrylic acid (MAA) was prepared by UV-initiated free radical polymerization. The resulting macromonomers and hydrogels were characterized by FTIR and/or ¹H NMR. Swelling behaviour and pH sensitivity of the hydrogels were studied in detail. With increase in pH of aqueous medium from 1.2 to 7.2, swelling ratio of the hydrogels increased accordingly. The hydrolytic degradation behaviour was also investigated. The prepared biodegradable pH-sensitive hydrogel based on PCL, MPEG, and MAA might have great potential application in smart drug delivery system.     

Photooxidation of phenol in aqueous nanodispersion of humic acid

Photooxidation of phenol sensitized by Aldrich humic acid (AHA) has been studied in an aqueous solution at neutral and basic pH. Solutions containing phenol and AHA of various concentrations were irradiated with monochromatic light at 253.7 nm or with polychromatic light within the wavelength range of 310–420 nm. The quantum yields of phenol photodegradation under these conditions were determined. At the wavelength of 253.7 nm direct degradation of phenol was much more effective than that sensitized by AHA. With polychromatic light the photooxidation was found to be strongly dependent on pH of aqueous solution and independent on AHA concentration.     

Biosorption of copper ions from aqueous solutions by Spirulina platensis biomass

In this study, the economically important micro-alga (cyanobacterium) Spirulina platensis was used as biosorbent for the removal of copper from aqueous solutions. The cyanobacterium was exposed to various concentrations of copper and adsorption of copper by the biomass was evaluated under different conditions that included pH, contact time, temperature, concentration of adsorbate and the concentration of dry biomass. Increased adsorption of copper by the non-living biomass was recorded with gradually increasing pH, and a maximal uptake by the biomass was observed at pH 7. The adsorption of copper was found to increase gradually along with decrease in biomass concentration. Biosorption was found to be at a maximum (90.6%), in a solution containing 100 mg copper/L, at pH 7, with 0.050 g dry biomass and at 37 °C with 90 min of contact time. Analysis of the spectrum obtained with atomic absorption spectrophotometer (AAS), indicated that the adsorbent has a great potential to remove copper from aqueous media contributing to an eco-friendly technology for efficient bioremediation in the natural environment.     

(Vapour + liquid) equilibria,volumetric and compressibility behaviour of binary and ternary aqueous solutions of 1-hexyl-3-methylimidazolium chloride,methyl potassium malonate,and ethyl potassium malonate

(Vapour + liquid) equilibrium data (water activity, vapour pressure, osmotic coefficient, and activity coefficient) of binary aqueous solutions of 1-hexyl-3-methylimidazolium chloride ([C₆mim][Cl]), methyl potassium malonate, and ethyl potassium malonate and ternary {[C₆mim][Cl] + methyl potassium malonate} and {[C₆mim][Cl] + ethyl potassium malonate} aqueous solutions were obtained through the isopiestic method at T = 298.15 K. These results reveal that the ionic liquid behaves as surfactant-like and aggregates in aqueous solutions at molality about 0.4 mol · kg⁻¹. The constant water activity lines of all the ternary systems investigated show small negative deviations from the linear isopiestic relation (Zdanovskii–Stokes–Robinson rule) derived using the semi-ideal hydration model. The density and speed of sound measurements were carried out on solutions of methyl potassium malonate and ethyl potassium malonate in water and of [C₆mim][Cl] in aqueous solutions of 0.25 mol · kg⁻¹ methyl potassium malonate and ethyl potassium malonate at T = (288.15 to 308.15) K at atmospheric pressure. From the experimental density and speed of sound data, the values of the apparent molar volume, apparent molar isentropic compressibility and excess molar volume were evaluated and from which the infinite dilution apparent molar volume and infinite dilution apparent molar isentropic compressibility were calculated at each temperature. Although, there are no clear differences between the values of the apparent molar volume of [C₆mim][Cl] in pure water and in methyl potassium malonate or ethyl potassium malonate aqueous solutions, however, the results show a positive transfer isentropic compressibility of [C₆mim][Cl] from pure water to the methyl potassium malonate or ethyl potassium malonate aqueous solutions. The results have been interpreted in terms of the solute–water and solute–solute interactions.     

羧基化石墨烯对4种离子型染料的吸附脱色

合成的羧基化石墨烯（G-COOH）用FT-IR进行表征,并对G-COOH用于水溶液中甲基紫、中性红、灿烂黄和茜素红4种离子型染料的吸附性能进行了研究。 考察了吸附剂用量、吸附时间、初始浓度以及溶液pH值等条件对吸附效果的影响。 同时,研究了甲基紫染料的脱附性能,结果表明,用NaOH/EtOH混合溶液洗脱甲基紫,洗脱率可达88.2%,洗脱后的G-COOH可再利用。 从热力学角度探讨得出,G-COOH对阳离子染料甲基紫和中性红的吸附行为能够较好的符合Langmuir等温吸附模型,而对阴离子染料灿烂黄和茜素红的吸附行为则能够较好的符合Freundlich等温吸附模型,计算的吸附参数表明,G-COOH对4种染料的吸附过程容易进行。 动力学研究表明,G-COOH对4种离子型染料的吸附行为均能较好的符合准二级吸附模型。 该实验研究表明,在处理染料废水时,G-COOH为相当优异的吸附剂。     

Introduction of pH‐sensitivity into mechanically strong nanoclay composite hydrogels based on N‐isopropylacrylamide

pH‐sensitive nanoclay composite hydrogels based on N‐isopropylacrylamide (NIPA) were synthesized by copolymerization with cationic and anionic comonomers. Laponite nanoclay particles served as multifunctional crosslinkers, producing hydrogels with exceptionally high mechanical strengths, as measured by elongation at break. Cationic copolymer gels based on NIPA and dimethylaminoethylmethacrylate were prepared by aqueous free radical polymerization, adopting a procedure reported by Haraguchi (Adv Mater 2002, 14, 1120–1124). Without modification, this technique failed to produce anionic copolymer gels of NIPA and methacrylic acid (MAA), due to flocculation of clay particles. Three methods were conceived to incorporate acidic MAA into nanoclay hydrogels. First, NIPA was copolymerized with sodium methacrylate under dilute conditions, producing hydrogels with good pH‐sensitivity but weak mechanical characteristics. Second, NIPA was copolymerized with methyl methacrylate, which was then hydrolyzed to generate acid sidegroups, yielding hydrogels that were much stronger but less pH sensitive. Third, NIPA was copolymerized with MAA following modification of the nanoclay surface with pyrophosphate ions. The resulting hydrogels exhibited both strong pH‐sensitivities at 37 °C and excellent tensile properties. Optical transparency changed during polymerization, depending on hydrophobicity of the components. This work increases the diversity and functionality of nanoclay hydrogels, which display certain mechanical advantages over conventionally crosslinked hydrogels. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 6630–6640, 2008