Synthesis of perfluorinated cation exchange membranes by preirradiation grafting of acrylic acid onto ethylene-tetrafluoroethylene films

Hydrophilic carboxyl-containing fluoromembranes were obtained by preirradiation grafting of acrylic acid onto ethylene-tetrafluoroethylene film. The dependence of the grafting reaction on temperature, monomer concentration, nature and concentration of inhibitor, crosslinking agent, solvent, and on the preirradiation dose was investigated. The grafting rates increase with temperature, whereas the saturation degree of grafting (SDG) decreases. Addition of inhibitor minimizes homopolymerization and at the same time hinders the grafting reaction. The SDG increases markedly with monomer concentration until it reaches a maximum and thereafter decreases. The grafting rates increase with preirradiation dose. Addition of crosslinking agent initially decreases the SDG, and thereafter increases. The highest grafting rates are obtained using water as solvent followed by methanol and ethanol. The results are discussed on the basis of various parameters: interaction between monomer diffusibility and the viscosity of the monomer bath, the mutual reactivity of monomer, and the crosslinking agent. An agreement is observed between the values of the electrical resistance and the saturation degree of grafting. © 1996 John Wiley & Sons, Inc.     

Radiation-induced graft copolymerization of mixtures of styrene and acrylamide onto cellulose acetate. I. Effect of solvents

The grafting of styrene and acrylamide, from both their binary and unitary systems, on cellulose acetate film was studied by means of the cobalt-60 postirradiation grafting technique. The extent of grafting was found to be dependent on preirradiation dose, reaction time, and temperature, and the optimum conditions were evaluated. The effect of solvents, e.g., water, methanol, ethanol, isopropanol, and t-butanol were studied. The composition of the binary mixture as well as the nature of the alcohol used as the solvent were found to have a strong influence in modifying the course of grafting. Each component of the binary monomer mixture was found to sensitize the grafting of the other, when the former is present in relatively large concentration. The observed results are discussed in detail in terms of relative molecular reactivity and reactivity ratios.     

Kinetic approach to radiation-induced grafting in the polyethylene–styrene system. II

The investigation method reported in the previous paper was applied to four reaction methods: preirradiation method with reaction in liquid monomer, preirradiation method with reaction in monomer vapor, simultaneous irradiation method in liquid, and simultaneous irradiation method in vapor. The increasing patterns and values of the degree of grafting experimentally obtained roughly agreed with those calculated by using the same rate constants. At high monomer concentration, the rate of grafting was small; at low monomer concentration, the rate of grafting was large. Strictly speaking, the data by simultaneous irradiation method were somewhat larger than those by calculation. Two additional factors, as homopolymerization and the grafting from the radicals formed on the grafted polystyrene, were considered and discussed. The rate constants obtained were also discussed.     

Grafting onto polypropylene. I. Effect of solvents in gamma radiation-induced graft copolymerization of poly(acrylonitrile)

Graft copolymerization of acrylonitrile (AN) onto isotactic polypropylene (PP) fiber has been studied by using gamma rays from a 2100 Ci ⁶⁰Co source as initiator by preirradiation technique. The preirradiated PP was treated with AN and the mixture was graft copolymerized by heating to 100°C for different time periods. The percentage of grafting is determined as a function of total dose, reaction time, and monomer concentration. The effect of different solvents such as H₂O, CH₃OH, and dioxane upon percentage of grafting has been studied. The maximum effect was observed in water and the minimum in CH₃OH. PP—g—PAN was characterized by IR spectroscopic and thermogravimetric methods. A plausible mechanism of gamma radiation induced grafting of AN onto PP in the absence and in the presence of solvents has been proposed. An attempt has been made to compare the relative abilities of different solvents to influence grafting.     

Radiation (60Co)-Induced Graft Copolymerization of Acrylamide on Jute Fiber

The radiation induced graft copolymerization of acrylamide onto jute fibers was studied following preirradiation of jute in air using a⁶⁰Co source of γ-radiation and subsequent polymerization of acrylamide in a limited aqueous system under nitrogen at 607°C. An increase of the time of preirradiation (at a fixed dose rate) increased the percent grafting measurably and the grafting efficiency marginall Grafting effects showed further improvement on addition of Fe²⁺ or Co²⁺ ions to the system prior to the polymerization step. Increasing the concentration of Fe²⁺ or Co²⁺ ion led to an increase in the grafting parameters with a leveling off effect in the higher concentration range, however. An increase in the polymer (jute) content for a fixed monomer content produced a significant increase in the efficiency of grafting, while % grafting followed a slowly decreasing trend.     

Grafting Vinyl Monomers onto Silk Fibers: Graft Copolymerization of Vinyl Monomers onto Silk Using the Vanadyl Acetylacetonate Complex

Abstract

The graft copolymerization of methyl methacrylate (MMA) onto mulberry silk fibers was studied in aqueous solution using the acetylacetonate oxovanadium (IV) complex. The rate of grafting was investigated by varying the concentration of the monomer and the complex, the acidity of the medium, the solvent composition of the reaction medium, the surfactants, and the inhibitors. The graft yield increases with increasing concentration of the initiator up to 8.75 × 10^?5 mol/L, of the monomer up to 0.5634 mol/L, and thereafter it decreases. Among the various vinyl monomers studied, MMA was found to be most suitable for grafting. Grafting increases with increasing concentration of HCIO₄ and with increasing temperature. Inhibitors like picryl chloride and hydroquinone significantly decrease the extent of grafting. Alcoholic solvents at a solvents/water ration of 10:90 seem to constitute the most favorable medium for grafting. A suitable reaction scheme has been proposed, and the activation energy calculated from the Arrhenius plots.     

Radiation‐induced graft modification of knitted poly(ethylene terephthalate) fabric for collagen immobilization

Radiation‐induced graft co‐polymerization of methacrylic acid and N‐vinyl‐2‐pyrrolidone mixture from poly(ethylene terephthalate) knitted fabrics were conducted using a preirradiation method. The influence of the graft conditions, such as irradiation dose, reaction time, monomer concentration and temperature on the degree of grafting was determined. It was found that there is a limiting irradiation dose of 40 kGy above which the degree of grafting does not increase. An increase in the monomer concentration from 20 to 40% and an increase in temperature from 60 to 80°C gave a higher initial rate of grafting as well as higher equilibrium graft levels. The characterization of the fabric was carried out by attenuated total reflectance infrared spectroscopy (ATR‐IR), X‐ray photoelectron spectroscopy (XPS) and scanning electron microscopy (SEM). The grafted fabric surface, carrying negatively charged carboxylate ions, was shown to attract collagen, being positively charged to provide bioreceptive surfaces. Copyright © 2007 John Wiley & Sons, Ltd.     

Kinetic study of preirradiation grafting of acrylic acid onto poly(tetrafluoroethylene–perfluorovinyl ether) copolymer

A kinetic study has been made on the preirradiation grafting of acrylic acid (AAc) onto poly(tetrafluoroethylene–perfluorovinyl ether) (PFA) film. The effect of grafting conditions was investigated. The dependences of the grafting rate on preirradiation dose and monomer concentration was found to be of the order of 0.5 and 1.3, respectively. The final degree of grafting was found to increase with dose and monomer concentration. However, it decreases as the grafting temperature increase. The overall activation energy for the graft polymerization was calculated from Arrhenius plots to be 5.6 kcal/mol. The activation energy for this grafting system was found to be independent of preirradiation dose used in the range from 10 to 100 kGy. The relationship between the grafting rate and film thickness gave a negative first-order dependence. The results suggest that the grafting proceeds by radical mechanism with bimolecular termination of growing chain radicals. It was reasonable concluded that this grafting proceeds from the surface to the center of film with progressive monomer diffusion through the grafted layer which swells in the monomer solution.     

Preirradiation grafting of N-vinyl-2-pyrrolidone onto poly(tetrafluoroethylene) and poly(tetrafluoroethylene-hexafluoropropylene) films

Preirradiation grafting of N-vinylpyrrolidone (NVP) onto poly(tetrafluoroethylene) (PTFE) and poly(tetrafluoroethylene-hexafluoropropylene) (FEP) films was investigated. The influence of grafting parameters such as preirradiation dose, monomer concentration, and grafting temperature on the rate and grafting yield was studied. Different solvents were used for diluting the monomer and it was found that the aqueous monomer solution at a concentration of 80 wt% was suitable for this grafting system. However, the graft polymerization of NVP in benzene terminated within a short time without significant grafting yield. The dependence of the grafting rate on preirradiation dose and monomer concentration was 1.2 and 1.07 order, respectively, for grafting onto PTFE films and 1.1 and 1.2 order, respectively, for grafting onto FEP films. Arrhenius plots for grafting onto PTFE films showed a breaking point at ca. 35°C and the overall activation energies were calculated as 23.6 and 9.0 Kcal/mol below and above 35°C, respectively. For grafting onto FEP films, however, no break was observed in the Arrhenius plots; the overall activation energy was 11.9 Kcal/mol. The swelling behavior and electric resistance of the grafted materials were investigated.     

Radiation grafting of dimethylaminoethylmethacrylate onto poly(propylene)

Radiation-induced grafting of dimethylaminoethylmethacrylate onto poly(propylene) films by preirradiation method in presence of air was investigated. The effects of monomer concentration, preirradiation dose and temperature on grafting value as well as the effect of grafting value on crystallinity of the modified polymer were determined.     

Grafting onto Wool. IX. Graft Copolymerization of Vinyl Monomers by Use of Vanadium Oxyacetylacetonate as Initiator

Methyl methacrylate (MMA), acrylic acid (AAc), and vinyl acetate (VAc) were graft copolymerized onto Himachali wool in an aqueous medium by using vanadium oxyacetyl acetonate as initiator. Graft copolymerization was studied at 45, 55, 65, and 75°C for various reaction periods. The percentage of grafting was determined as functions of concentration of monomers, concentration of initiator, time, and temperature. The maximum percentage of grafting with each monomer occurred at 55°. Several grafting experiments were carried out in the presence of various additives which include HNO3, DMSO, and pyridine. Nitric acid was found to promote grafting of MMA. All these additives had adverse effects on grafting of VAc and AAc. MMA, VAc, and AAc were found to differ in reactivity toward grafting and followed the order MMA > AAc > VAc.     

Functionalization of polypropylene by grafting with itaconic acid

Grafting of polypropylene was carried out in both boiling xylene and decalin as solvent medium with itaconic acid (2-methylenesuccinic acid) as functional polar monomer using 2,5-dimethyl-2,5-bis(tert-butylperoxy)hexane (Lupersol 101) as radical initiator. It was found that the temperature influenced the percentage of monomer grafted onto polypropylene and that the amount of monomer incorporated was practically constant after 5 min. The results also show that the amount of monomer incorporated is proportional to the initial monomer concentration used in the grafting reaction, although for higher initiator concentrations a reduction in the percentage of grafting was found.     

淀粉乙酸酯的阴离子接枝己内酯聚合研究

将淀粉在二甲基甲酰胺、吡啶存在下 ,以乙酸酐进行部分乙酰化 ,制备取代度为 0 7～ 1 9的淀粉乙酸酯 (St Ac) .以萘钠与淀粉乙酸酯中残余的羟基反应 ,将羟基转化为醇盐 (ONa) ,引发己内酯进行阴离子开环接枝聚合 ,合成了淀粉 聚己内酯接枝共聚物 (St g PCL) .采用凝胶渗透色谱法 (GPC)研究了接枝前后聚合物分子量的变化情况 ,并以接枝率、单体转化率对接枝反应进行了表征 .研究了接枝条件如温度、溶剂、引发剂和单体的用量对接枝率及单体转化率的影响 .研究发现随着反应温度升高 ,接枝率、单体转化率呈S曲线变化 ,单体浓度、引发剂浓度的增大有利于接枝反应的进行 .     

Radiation-induced grafting in the polyethylene–styrene system and differential thermal analysis of the grafted samples

The graft polymerization of styrene onto high-density polyethylene films was carried out by γ-irradiation in the vapor phase. Two methods were used for grafting in these experiments: a preirradiation method and a simultaneous irradiation method. The effects of these grafting methods on the reaction mechanism of grafting and on the properties of the grafted samples were investigated. The amounts of styrene homopolymer in the grafted samples is under 2% in the case of the preirradiation method and above 10% in the case of the simultaneous irradiation method. The activation energies were calculated to be 18 kcal/mole for grafting in the preirradiation method and 15 kcal/mole for weight increase of polyethylene films in styrene vapor. The difference in the dimensional expansion between in the direction of stretching and the direction prependicular to it is smaller with preirradiation grafting than with grafting by the simultaneous irradiation method. Differential thermal analysis of the grafted films shows an endothermic peak due thermal decomposition which decreases gradually from 450°C to 415°C with increase in degree of grafting from 30 to 60%. The lowering of this peak temperature appears at a lower degree of grafting when the preirradiation method is used. On the basis of these results, it is concluded that the reaction rate of radiation-induced grafting in the vapor phase depends closely upon the processes of adsorption, dissolution, and diffusion of styrene monomer in polyethylene films; in the case of simultaneous irradiation method, the reaction proceeds comparatively uniformly in the amorphous region, while in the case of the preirradiation method, the reaction proceeds mainly at the boundary of the crystalline and amorphous regions.     

Ceric Ion-Initiated Grafting of Poly(Methyl Acrylate) onto Chitin

Abstract

Poly(methy1 acrylate) was grafted onto chitin in an aqueous medium by using the ceric ion as a redox initiator in the presence of 10^?4 M nitric acid and oxygen from the atmosphere. The grafting percentage turned out to be dependent on reaction temperature, time, and initiator concentration, but it was found to be independent of monomer concentration. In the course of the grafting reaction, homopolymerization of methyl acrylate occurs. The percentage of homopolymer was found to depend only on the reaction temperature. The apparent activation energy for the grafting reaction was estimated to be 11 kcal/mol. The grafted chitin is insoluble in solvents for chitin but shows enhanced swelling in some organic solvents.     

Perfluorinated anion exchange membranes: Preparation and preliminary tests of dialysis

Using the preirradiation technique a kinetic study of the grafting of the 4-vinyl pyridine (V₄P) and an aliphatic ammonium monomer (ALAM) onto the copolymer film of ethylene–tetrafluoroethylene (ETFE) has been performed. The influence of dose, temperature, and concentration of monomer, reticular agent, and inhibitor were investigated. The results are discussed on the basis of the interactions between monomer diffusibility and viscosity of the medium. The characteristics of some membranes were determined. Their applicability to the recovery of acid by dialysis is demonstrated.     

Membranes obtained by preirradiation grafting of acrylic acid onto poly(tetrafluoroethylene–perfluorovinyl ether)

Some properties of the membranes obtained by preirradiation grafting of acrylic acid onto poly(tetrafluoroethylene-perfluorovinyl ether) copolymer (PFA) films have been investigated. The dimensional change caused by grafting and swelling behavior, water uptake, electrical conductivity, and mechanical properties of the grafted films were found to increase as the grafting proceeds. The influence of the preparation conditions (such as preirradiation dose, monomer concentration, grafting temperature, and film thickness) on those properties was studied. These properties were found to be dependent mainly on the degree of grafting regardless of grafting conditions, except at higher monomer concentration (>40 wt %). The electric conductivity and mechanical properties for the membranes obtained at higher AAc concentrations were lower than those obtained at lower ones. Analysis by x-ray microscopy of the grafted films revealed that the grafting begins at the part close to the film surface and proceeds into the central part with progressive diffusion of monomer to give finally homogeneous distribution of the electrolytes in the whole bulk of the polymer. The membranes show good electrochemical and mechanical properties which make them acceptable for practical use as cation-exchange membranes.     

Modification of isotactic polypropylene film by radiation-induced graft copolymerization

In the present communication we report on the radiation induced grafting of methyl methacrylate (MMA) onto irradiated isotactic polypropylene film (IPP) by Peroxidation method to prepared grafted membrane (IPP-g-MMA). The radioactive isotope ⁶⁰Co was used as the source of gamma radiation. A plausible mechanism of grafting has been proposed. Optimum conditions pertaining to maximum percentage of grafting were evaluated as a function of different reaction parameters such as radiation dose, inhibitor concentration, monomer concentration, reaction time and reaction temperature respectively. Maximum percentage of grafting (85%) was obtained at [radiation dose] = 25 kGy, [inhibitor concentration] = 0.04 wt%, [MMA] = 6 wt%, [Reaction Temperature] = 60 °C in a [Reaction time] of 120 min. The evidence of grafted membrane was characterized by Fourier transform infrared spectroscopy, Atomic force microscopy method, Scanning electron microscopy which indicates that MMA has been grafted onto IPP. Hydrolysis of the grafted membranes in 1 N NaOH transformed ester groups of the grafted membranes to carboxylic acid and hydroxyl groups to form hydrolyzed grafted membranes. Hydrolyzed grafted membranes were investigated for their swelling behavior. Swelling properties of the hydrolyzed grafted membranes were performed in different solvents such as water, N,N-dimethylformamide (DMF) and dimethylsulfoxide (DMSO). Maximum percentage swelling value of IPP-g-MMA was observed in pure DMSO, followed by DMF and water.     

Modification of polyethylene films by radiation grafting of glycidyl methacrylate and immobilization of β-cyclodextrin

Glycidyl methacrylate was grafted onto polyethylene films using a preirradiation method with γ rays. The effect of absorbed dose, monomer concentration, and reaction time on the degree of grafting was determined. The grafted samples were verified by FTIR-ATR spectroscopy. β-Cyclodextrin was immobilized onto polypropylene modified with glycidyl methacrylate, and the ability of the cavities of β-cyclodextrin to form inclusion complexes was demonstrated using the typically organic compound approach with m-toluic acid (3-MBA) as a probe.     

Radiation-induced grafting of sensitive polymers

Films of PP and PTFE were modified by gamma-radiation grafting of pH and thermo sensitive monomers (two step method) by using both the preirradiation and the direct methods. The effects of the absorbed dose, monomer concentration and reaction time were investigated. The surface chemistry of grafted samples was analyzed by FTIR-ATR spectroscopy, while their thermal properties were analyzed by TGA and DSC. The stimuli-responsive behavior was studied by swelling and contact angle in water, as well as by DSC. Sensitive films presented a critical pH and LCST.