Oxidation of naringenin by gamma-radiation

The reaction of OH with naringenin (4′,5,7-trihydroxyflavanone) in the presence of air induced the formation of the hydroxylation product eriodictyol (3′,4′,5,7-tetrahydroxyflavanone). Its yield was dependent on pH. The initial degradation yield of naringenin was G_i(-Nar)=(2.5±0.2)×10⁻⁷ mol dm⁻³ J⁻¹. For the reaction with OH, a rate constant k (OH+naringenin)=(7.2±0.7)×10⁹ M⁻¹ s⁻¹ was determined. In the presence of N₂O and NaN₃/N₂O, no eriodyctiol was formed. Apigenin (4′,5,7-trihydroxyflavon) was detected as decay product of the naringenin phenoxyl radicals. In Ar-saturated solutions, naringenin exhibited a pronounced radiation resistance, G(-naringenin) ∼0.3×10⁻⁷ mol dm⁻³ J⁻¹.     

Photocatalysis of 4-nitrophenol using zinc phthalocyanine complexes

Photodegradation of 4-nitrophenol (4-Np) in the presence of zinc tetrasulfophthalocyanine (ZnPcS₄), zinc octacarboxyphthalocyanine (ZnPc(COOH)₈) and a sulfonated ZnPc containing a mixture of differently sulfonated derivatives (ZnPcS_mix), as photocatalysts is reported. ZnPcS_mix is the most effective catalyst in terms of a high quantum yield for 4-Np degradation and the stability of the catalyst. However ZnPc(COOH)₈ degrades readily during the catalysis, but it has a higher quantum yield (Φ_4-Np) for 4-Np degradation than the rest of the complexes. The Φ_4-Np values were closely related to the singlet oxygen quantum yields Φ_Δ and hence aggregation. The rate constants for the reaction with 4-Np were k_r = 0.67 × 10⁶ mol⁻¹ dm³ s⁻¹ for ZnPcS_mix and 2.8 × 10⁸ mol⁻¹ dm³ s⁻¹ for ZnPc(COOH)₈.     

One-step fabrication of chitosan–hematite nanotubes composite film and its biosensing for hydrogen peroxide

This work reports on a novel chitosan–hematite nanotubes composite film on a gold foil by a simple one-step electrodeposition method. The hybrid chitosan–hematite nanotubes (Chi–HeNTs) film exhibits strong electrocatalytic reduction activity for H₂O₂. Interestingly, two electrocatalytic reduction peaks are observed at −0.24 and −0.56 V (vs SCE), respectively, one controlled by surface wave and the other controlled by diffusion process. The Chi–HeNTs/Au electrode shows a linear response to H₂O₂ concentration ranging from 1 × 10⁻⁶ to 1.6 × 10⁻⁵ mol L⁻¹ with a detection limit of 5 × 10⁻⁸ mol L⁻¹ and a sensitivity as high as 1859 μA μM⁻¹ cm⁻².     

Electroenzymatic oxidation of polyaromatic hydrocarbons using chemical redox mediators in organic media

The bioelectrochemical oxidation of two polyaromatic hydrocarbons (PAH): anthracene (ANT) and pyrene (PYR), using horseradish peroxidase (HRP) resulting in the synthesis of photoactive polyaromatic quinones in organic media was studied. The electrochemical generation of hydrogen peroxide was compared with its direct addition in concentrations of up to 0.0012 mol L⁻¹. In addition, three different chemical redox mediators were evaluated: ABTS, thionin and ortho-aminophenol. In a reaction medium containing 30% acetone and ABTS as mediator with a molar ratio mediator/PAH of 1:10, HRP attained the highest level of oxidation of PAH (1 × 10⁻³ mol L⁻¹): ANT (94%) and PYR (91%), producing 9,10-anthraquinone and mainly 1,2 and 4,5-pyrenequinones, respectively.     

Kinetics of the diazotization and azo coupling reactions of procaine in the micellar media

The kinetics of the diazotization reaction of procaine in the presence of anionic micelles of sodium dodecyl sulfate (SDS) and cationic micelles of cetyltrimethyl ammonium bromide (CTAB), dodecyltrimethyl ammonium bromide (DDTAB) and tetradecyltrimethyl ammonium bromide (TDTAB) were carried out spectrophotometrically at λ_max = 289 nm. The values of the pseudo first order rate constant were found to be linearly dependent upon the [NaNO₂] in the concentration range of 1.0 × 10⁻³ mol dm⁻³ to 12.0 × 10⁻³ mol dm⁻³ in the presence of 2.0 × 10⁻² mol dm⁻³ acetic acid. The concentration of procaine was kept constant at 6.50 × 10⁻⁵ mol dm⁻³. The addition of the cationic surfactants increased the reaction rate and gave plateau like curve. The addition of SDS micelles to the reactants initially increased the rate of reaction and gave maximum like curve. The maximum value of the rate constant was found to be 9.44 × 10⁻³ s⁻¹ at 2.00 × 10⁻³ mol dm⁻³ SDS concentration. The azo coupling of diazonium ion with β-naphthol (at λ_max = 488) nm was found to linearly dependent upon [ProcN₂⁺] in the presence of both the cationic micelles (CTAB, DDTAB and TDTAB) and anionic micelles (SDS). Both the cationic and anionic micelles inhibited the rate of reactions. The kinetic results in the presence of micelles are explained using the Berezin pseudophase model. This model was also used to determine the kinetic parameters e.g. k_m, K_s from the observed results of the variation of rate constant at different [surfactants].     

Determination of nitrite with the electrocatalytic property to the oxidation of nitrite on thionine modified aligned carbon nanotubes

A thionine modified aligned carbon nanotubes (ACNTs) electrode was fabricated and was used to electrochemically determine nitrite. The thionine modified ACNTs electrode exhibited enhanced electrocatalytic behavior to the oxidation of nitrite. The electrochemical mechanism of the thionine/ACNTs electrode towards the oxidation of nitrite was discussed. The thionine modified ACNTs electrode exhibited fast response towards nitrite with a detection limit of 1.12 × 10⁻⁶ mol  L⁻¹ and a linear range of 3 × 10⁻⁶ – 5 × 10⁻⁴ mol  L⁻¹. The proposed method was successfully applied in the detection of nitrite in real samples.     

Voltammetric determination of tert-butylhydroquinone in biodiesel using a carbon paste electrode in the presence of surfactant

This paper reports an electroanalytical method developed for determining the antioxidant tert-butylhydroquinone (TBHQ) in biodiesel, based on the enhancement effect of cetyltrimethylammonium bromide (CTAB). In pH 6.5 Britton–Robinson buffer, a poorly defined oxidation peak was observed for TBHQ at a carbon paste electrode (CPE). In the presence of low concentrations of CTAB, however, the oxidation peak current was markedly increased. Several parameters were studied and optimized for the development of this methodology, and under optimal conditions the oxidation peak current was proportional to TBHQ concentration in the range of (1.05–10.15) × 10⁻⁶ mol L⁻¹, with limits of detection and quantification of 7.11 × 10⁻⁸ mol L⁻¹ and 2.37 × 10⁻⁷ mol L⁻¹, respectively, by linear sweep voltammetry (LSV). The method was applied to TBHQ determination in soybean biodiesel samples. The results were satisfactory in comparison with those obtained using high-performance liquid chromatography (HPLC).     

Noncovalently functionalized water-soluble multiwall-nanotubes through azocarmine B and their application in nitric oxide sensor

A new noncovalent approach for the dissolution of MWNTs in water by azocarmine B (ACB) is reported. Through a simple electro-polymerization procedure, a novel electrochemical NO sensor based on water-soluble MWNTs and polyazocarmine B (PACB) nanofilm electrode was prepared, which showed excellent electrocatalytic activity towards the oxidation of nitric oxide (NO). The oxidation current linearly increased with the nitric oxide concentration in the range of 2.2 × 10⁻⁷–1.2 × 10⁻⁴ mol L⁻¹ with a low detection limit of 2.8 × 10⁻⁸ mol L⁻¹. The sensor has the merit of good stability, reproducibility, high sensitivity and selectivity, and it can be used to monitor NO released from rat liver cells effectively.     

Simultaneous determination of ascorbic acid,epinephrine, and uric acid by differential pulse voltammetry using poly(p-xylenolsulfonephthalein) modified glassy carbon electrode

A novel poly(p-xylenolsulfonephthalein) modified glassy carbon electrode was prepared for the simultaneous determination of ascorbic acid (AA), epinephrine (EP) and uric acid (UA). Cyclic voltammetric, chronoamperometric, and differential pulse voltammetric methods were used to investigate the modified electrode for the electrocatalytic oxidation of EP, AA, and UA in aqueous solutions. The separation of the oxidation peak potentials for AA–EP and EP–UA was about 200 and 130 mV, respectively. The calibration curves obtained for AA, EP, and UA were in the ranges of 10–1343, 2–390, and 0.1–560 μmol L⁻¹, respectively. The detection limits (S/N = 3) were 4, 0.1, and 0.08 μmol L⁻¹ for AA, EP and UA, respectively. The diffusion coefficient and the catalytic rate constant for the oxidation of EP at the modified electrode were calculated as 1.40(±0.10) × 10⁻⁴ cm² s⁻¹ and 1.06 × 10³ mol⁻¹ L s⁻¹, respectively. The present method was applied to the determination of EP in pharmaceutical and urine samples, AA in commercially available vitamin C tablet, and EP plus UA in urine samples.     

New methodology for anodic stripping voltammetric determination of methylmercury

A novel procedure for trace methylmercury determinations by anodic stripping voltammetry at a gold film electrode is presented. Measurements were performed in a flow system. For selective determination of methylmercury, the Hg²⁺ ions were masked by complexation with DTPA. Hg-DTPA complex is not reduced at the gold film electrode at the potential of methylmercury reduction to the metallic state. The calibration graph was linear from 5 × 10⁻⁹ to 1 × 10⁻⁷ mol L⁻¹ for an accumulation time 600 s. A detection limit (based on 3σ criterion) for methylmercury was 2.3 × 10⁻⁹ mol L⁻¹. The validation of the proposed procedure was made by analyses of human hair certified reference material.     

Thermodynamics of binary and ternary interactions in the tin(II)/phytate system in aqueous solutions,in the presence of Cl− or F−

An extensive study of the tin(II)/phytate (Phy) system was carried out in NaNO_3(aq), at different ionic strengths (0.10 ⩽ I/mol · L⁻¹ ⩽ 1.00) and temperatures (278.15 ⩽ T/K ⩽ 328.15), by potentiometric and voltammetric techniques. The stability and formation enthalpy changes of six SnH_qPhy species were determined. To better characterise this system, some potentiometric titrations were also carried out in mixed ionic media (NaNO_3(aq) + NaCl_(aq) and NaNO_3(aq) + NaF_(aq)) at total ionic strength I = 1.00 mol · L⁻¹. The formation of some ternary mixed SnH_qPhyCl and SnH_qPhyF species (charges omitted for simplicity) was found. The formation enthalpies of the complex species were calculated, at I = 0.40 mol · L⁻¹ in NaNO_3(aq), by the dependence of stability constants on temperature obtained by potentiometric titrations, in the range 278.15 ⩽ T/K ⩽ 328.15. The complex formation process is endothermic, and the main contribution to tin(II) complexation by phytate is entropic in nature. For example, for the SnPhy species we have, at T = 298.15 K and I = 0.40 mol · L⁻¹ in NaNO_3(aq): ΔH = 57.7 ± 2.8 kJ mol · L⁻¹, ΔG = −99.9 ± 1.7 kJ mol · L⁻¹, and TΔS = 158 ± 3 kJ mol · L⁻¹. The ionic strength dependence of the formation constants of the simple tin(II)/phytate species, was modelled by the Debye–Hückel and the SIT approaches. The sequestering ability of phytate towards tin(II) was evaluated by calculating the pL_0.5 values (i.e., the total ligand concentration necessary to bind 50% of cation present in trace) at different ionic strengths, ionic media, and pH. The sequestering ability increases with increasing the pH, whilst it decreases with increasing the ionic strength (the same behaviour shown by the stability constants). Moreover, taking into account the different sequestering ability of phytate towards tin(II) in the different ionic media, the trend: pL_0.5 = 5.70 (in NaNO_3(aq) + NaF_(aq)) > pL_0.5 = 5.16 (in NaNO_3(aq) + NaCl_(aq)) > pL_0.5 = 4.86 (in NaNO_3(aq)) was observed at pH 8.1 and I = 1.00 mol · L⁻¹. This is due to the presence of a second ligand (Cl⁻ or F⁻) that stabilizes the complex species with the formation of ternary complex species. Some empirical relationships were also found.     

Enantiomeric recognition of amino acid derivatives by chiral schiff bases of calix[4]arene

Novel calix[4]arene Schiff bases bearing chiral substituents both on the upper and the lower rims have been developed. These chiral receptors exhibit good chiral recognition ability towards α-amino acid ester hydrochlorides (up to K_D/K_L = 4.36, ΔΔG₀ = − 3.65 kJ mol⁻¹) in CHCl₃. The molecular recognition abilities and enantioselectivities for guests are also discussed from a thermodynamic point of view.     

Thermal degradation and evolved gas analysis: A polymeric blend of urea formaldehyde (UF) and epoxy (DGEBA) resin

A polymeric blend has been prepared using urea formaldehyde (UF) and epoxy (DGEBA) resin in 1:1 mass ratio. The thermal degradation of UF/epoxy resin blend (UFE) was investigated by using thermogravimetric analyses (TGA), coupled with FTIR and MS. The results of TGA revealed that the pyrolysis process can be divided into three stages: drying process, fast thermal decomposition and cracking of the sample. There were no solid products except ash content for UFE during combustion at high temperature. The total mass loss during pyrolysis at 775 °C is found to be 97.32%, while 54.14% of the original mass was lost in the second stage between 225 °C and 400 °C. It is observed that the activation energy of the second stage degradation during combustion (6.23 × 10⁻⁴ J mol⁻¹) is more than that of pyrolysis (5.89 × 10⁻⁴ J mol⁻¹). The emissions of CO₂, CO, H₂O, HCN, HNCO, and NH₃ are identified during thermal degradation of UFE.     

Radiolytic degradation of 4-nitrophenol in aqueous solutions: Pulse and steady state radiolysis study

The radiation induced degradation of 4-nitrophenol (4-NP) has been studied by gamma irradiation, while the reactivity and spectral features of the short lived transients formed by reaction with primary transient radicals at different pHs has been investigated by pulse radiolysis technique. In steady state radiolysis a dose of 4.4 k Gy is able to degrade 98% of 1×10⁻⁴ mol dm⁻³ 4-NP. 4-NP has pK_a at 7.1, above which it is present in the anionic form. At pH 5.2, ^•OH and N₃^• radicals were found to react with 4-NP with rate constants of 4.1×10⁹ dm³ mol⁻¹ s⁻¹ and 2.8×10⁸ dm³ mol⁻¹ s⁻¹, respectively. Differences in the absorption spectra of species formed in the reactions of 4-NP with ^•OH and N₃^• radicals suggested that ^•OH radicals add to the aromatic ring of 4-NP along with electron transfer reaction, whereas N₃^• radicals undergo only electron transfer reaction. At pH 9.2, rate constants for the reaction of ^•OH radicals with 4-NP was found to be higher by a factor of 2 compared to that at pH 5.2. This has been assigned to the deprotonation of 4-NP at pH 9.2.     

Oxidative thermal degradation of LDPE and the determination of some thermodynamic quantities

The pyrolysis of polyolefin wastes is one of the possible ways to obtain chemical feedstocks. In this work, the thermal degradation of low density polyethylene, (LDPE), which is a major product within plastics, was investigated in a semi-batch reactor system. First-order rate kinetics approach was chosen and reaction rate coefficients, k, and some thermodynamic quantities determined such as activation energy, reaction enthalpy, free activation enthalpy, and entropy of degradation of LDPE for different air flow rates. We found that the maximum value of some thermodynamic quantities, such as reaction rate coefficient is 0.0243 min⁻¹ at 600 mL min⁻¹ air flow rate and the free activation enthalpy (ΔG^≠) is 148.66 kJ mol⁻¹ at 450 mL min⁻¹ air flow rate and the reaction enthalpy (ΔH^≠) is 57.65 J mol⁻¹ at 623 K temperature conditions. Moreover, we found that the oxidative degradation of LDPE is not spontaneous and has lower energy necessary (for degradation) than non-oxidative degradation processes.     

Reactivity of H atoms and hydrated electrons with chlorobenzoic acids

H radicals react with chlorobenzoic acids and chlorobenzene (k(H+substrates)=(0.7–1.5)×10⁹ dm³ mol⁻¹ s⁻¹) by addition to the benzene ring forming H adducts with characteristic absorption bands in the range of 310–360 nm. The rate constants for their second-order decay are 2k=(3.5–6)×10⁸ dm³ mol⁻¹ s⁻¹. By reduction with e_aq⁻ fragmentation and chloride release was established for 2- and 4-chlorobenzoic acid, for 3-chlorobenzoic acid the addition of electrons to the carboxylate group was observed by pulse radiolysis. By gamma radiolysis could be proved that these radical anions undergo intramolecular electron transfer and quantitave dechlorination. The efficiency in degradation was 4-chlorobenzoic acid>3-chlorobenzoic acid>2-chlorobenzoic acid. Benzoic acid was found as final product for all substrates.     

Sensing of 2,4-dichlorophenoxyacetic acid by surface-enhanced Raman scattering

Surface-enhanced Raman scattering (SERS) spectra of the herbicide 2,4-dichlorophenoxyacetic acid (2,4-D) was obtained by employing a bi-layer gold substrate, assembled by the reduction of Au(III) over gold-seeded nanoparticles immobilized on functionalized glass substrates. The SERS signal was linear with the logarithm of the solution concentrations between 1.0 × 10⁻⁷ mol L⁻¹ and 1.0 × 10⁻³ mol L⁻¹, indicating that the bi-layer gold substrate affords a significant dynamic range for SERS, providing an excellent analytical response within this concentration range, and revealing the high sensitivity of the gold surface towards such analyte. In addition, using the same gold substrate, a similar calibration curve was obtained for crystal-violet (CV), and it was possible to identify the concentration limit corresponding to the transition from the average SERS to the nonlinear SERS response.     

The investigation of thermodynamic parameters of kinetic reaction between o-phenylenediamine and gold (III)

A visible spectrophotometric method has been developed for the reaction kinetics of o-phenylenediamine in the presence of gold (III). The method is based on the measurement of the absorbance of the reaction o-phenylenediamine and gold (III). Optimum conditions for the reaction were established as pH 6 at λ = 466 nm.When the reaction kinetic of o-phenylenediamine by gold (III) was investigated, it was observed that the following rate formula was found as ln (A/A₀) = −kt, according to absorbance measurements. The activation energy E_a and Arrhenius constant A were calculated from the Arrhenius equation as 1.009 kJ · mol⁻¹ and 3.46 · 10⁻² s⁻¹, respectively. Other activation thermodynamic parameters, entropy, ΔS (J · mol⁻¹ · K⁻¹), enthalpy, ΔH (kJ · mol⁻¹), Gibbs free energy, ΔG (kJ · mol⁻¹) and equilibrium constant, K_e were calculated at T = (283.2, 303.2, 323.2, and 343.2) K. The study was exothermic due to the decrease of entropy and was a non-spontaneous process during activation.     

Catalytic effect of CTAB on the interaction of dipeptide glycyl-tyrosine (Gly-Tyr) with ninhydrin

The effect of cationic micelles of cetyltrimethylammonium bromide (CTAB) on the interaction of dipeptide glycyl-tyrosine (Gly-Tyr) with ninhydrin under varying conditions has been studied spectrophotometrically at 70 °C and pH 5.0. The reaction followed first- and fractional-order kinetics with respect to [Gly-Tyr] and [ninhydrin], respectively. Increase in total concentration of CTAB from 0 to 70 × 10⁻³ mol dm⁻³ resulted in an increase in the pseudo-first-order rate constant (k_ψ) by a factor of ca. 3. Quantitative kinetic analysis of k_ψ − [CTAB] data was performed on the basis of pseudo-phase model of the micelles (proposed by Menger and Portnoy and developed by Bunton) and Piszkiewicz model. A possible mechanism has been proposed and the kinetic data have been used to evaluate the micellar binding constants K_S (268 mol⁻¹ dm³ for Gly-Tyr) and K_N (64 mol⁻¹ dm³ for ninhydrin).     

Molecular interaction of organic dyes in bulk and confined media

Molecular interactions of five thiazine dyes with increasing alkyl substitution have been studied in aqueous and microemulsion media at 303 K within a concentration range of (1.35–7.00) × 10^?4 M. The dimerization constant (K_d) values for the five dyes are ranged between 1.761 and 6.258 × 10³ l mol^?1 in bulk water media, where as in microemulsion media, K_d's are ranged between 1.760 and 4.110 × 10³ l mol^?1. Thionine (with no methyl substitution) and azure A (with two methyl substitution) displayed slightly larger K_d values in microemulsion water pools compared to bulk water while other dyes recorded significant drop in K_d values. The influence of microemulsion media on the molecular interaction of dyes has been explained in terms of electrostatic and hydrophobic factors. The monomer and the dimer spectra are explained in terms of molecular exciton model and the optical absorption parameters of both the species are reported in bulk and confined media.