Easy access to N-alkylation of N-unsubstituted [60]fulleropyrrolidines: reductive amination using sodium triacetoxyborohydride

[60]Fulleropyrrolidines were used as secondary amines to react with aldehydes through reductive aminations to afford N-alkylated derivatives. In spite of the very weak base activity of the nitrogen atom of N-unsubstituted [60]fulleropyrrolidines, this method was found to be efficient at the aid of sodium triacetoxyborohydride. Several N-alkylated derivatives were synthesized and fully characterized.     

Iron triflate catalyzed reductive amination of aldehydes using sodium borohydride

An efficient and convenient procedure for the reductive amination of aldehydes using NaBH₄ in the presence of catalytic amount of Fe(OTf)₃ is described.     

Direct reductive alkylation of amine hydrochlorides with aldehyde bisulfite adducts

A mild procedure for the direct reaction of aromatic and aliphatic aldehyde bisulfite adducts with primary and secondary amine hydrochlorides in the presence of sodium cyanoborohydride in methanol is reported.     

Comparison of oligosaccharide labeling employing reductive amination and hydrazone formation chemistries

In this work, we compare labeling by two negatively charged fluorescent labels, 8-aminopyrene-1,3,6-trisulfonic acid (APTS) and 8-(2-hydrazino-2-oxoethoxy)pyrene-1,3,6-trisulfonic acid (Cascade Blue hydrazide [CBH]). Effectiveness of the labeling chemistries were investigated by 4-hydroxybenzaldehyde and maltoheptaose followed by LC/UV-MS and CE/LIF analysis, respectively. The reaction yield of APTS labeling was determined to be only ∼10%. This is due to reduction of almost 90% of the analyte by sodium cyanoborohydride to alcohol, which cannot be further labeled via reductive amination. However, the CBH labeling provides ∼90% reaction yield based on the LC/UV-MS measurements. The significantly higher labeling yield was also confirmed by CE/LIF measurements. Finally, the more effective hydrazone formation technique of CBH was characterized and applied for N-linked glycan analysis by CE/LIF.     

One-pot derivatization of medicinally important 9-aminoacridines by reductive amination and SNAr reaction

A new highly efficient one-pot derivatization of medicinally important 9-aminoacridines (9-AA) at the amine position is described. Simple reductive amination and S_NAr reaction using easily accessible starting materials give a fast entry to novel 9-AA derivatives for biological screening.     

A highly stereoselective reductive amination of 3-ketosteroid with amines: an improved synthesis of 3α-aminosteroid

A highly stereoselective reductive amination method was developed based on in situ generated sodium acyloxyborohydride and was successfully applied to a steroidal skeleton with various amine sources. High yield (96%) and a de of up to 95% were achieved by modifying the reducing reagent. The effect of this reagent will be discussed.     

以Pd/C为催化剂的松香加氢反应机理

松香是由松树分泌的松脂经蒸馏而得,其主要成分为枞酸型树脂酸(C19H29COOH)[1]。由于枞酸型树脂酸含有共轭双键,易与大气中的氧作用,使松香的颜色加深、质变脆、热稳定性差、品级下降。松香经催化加氢反应,改变了枞酸型树脂酸的双键结构,使其趋于脂环的稳定结构,消除了松香因共     

Stereoselective synthesis of substituted N-heterocycles via sequential cross metathesis—reductive cyclization

A diastereoselective synthesis of substituted mono- and bicyclic-piperidine and pyrrolidine derivatives is presented, employing a highly selective cross metathesis (CM) reaction followed by a domino reduction-cyclization process.     

ZrCl4/Hantzsch 1,4-dihydropyridine as a new and efficient reagent combination for the direct reductive amination of aldehydes and ketones with weakly basic amines

ZrCl4/Hantzsch 1,4-dihydropyridine is a mild and highly efficient reagent combination for the direct reductive amination.Weakly basic amines such as anilines substituted by electron-withdrawing group and heteroaromatic amines can be reductivelyalkylated with electron rich aldehydes and ketones under mild conditions to form the secondary amines in excellent yields.     

Direct reductive amination using triethylsilane and catalytic bismuth(III) chloride

Direct reductive amination (DRA) using triethylsilane (TESH) and catalytic bismuth(III) chloride (BiCl₃) is described for the first time. The use of TESH and BiCl₃ provides easy handling, low cost, non-toxicity, and a mild Lewis acid activity, thereby meeting the demand for green and sustainable chemistry. The developed DRA is highly chemoselective and applicable to less-basic amines. The experimental results of this study revealed that the developed DRA could be catalyzed by BiCl₃, which was gradually reduced to Bi(0) or bismuth with a low valency by TESH, but TESCl, Bi(0), and Bi(0) with TESCl catalyzed the DRA to some extent.     

Direct and indirect reductive amination of aldehydes and ketones with solid acid-activated sodium borohydride under solvent-free conditions

A simple and convenient procedure for reductive amination of aldehydes and ketones using sodium borohydride activated by boric acid, p-toluenesulfonic acid monohydrate or benzoic acid as reducing agent under solvent-free conditions is described.     

One-pot reductive amination of aldehydes and ketones with α-picoline-borane in methanol, in water, and in neat conditions

A one-pot reductive amination of aldehydes and ketones with amines using α-picoline-borane as a reducing agent is described. The reaction has been carried out in MeOH, in H₂O, and in neat conditions in the presence of small amounts of AcOH. This is a highly efficient and mild procedure that is applicable for a wide variety of substrates. In particular, this is the first successful demonstration that this type of reaction can be carried out in water and in neat conditions.     

Syntheses of new polyamine dendrimer units via a tandem hydroformylation/reductive amination sequences

Rh-catalyzed tandem hydroformylation/reductive amination sequences (hydroaminomethylation) starting from olefins are applied to the synthesis of new polyamine dendrimer units using both convergent and divergent strategies in solution as well as on solid support.     

A sort synthesis of polyhydroxylated pyrrolizidines via sequential 1,3-dipolar cycloaddition and reductive amination

Polyhydroxylated pyrrolizidines bearing a methyl group at C-5 have been synthesized by 1,3-dipolar cycloaddition of five membered cyclic nitrones with methyl vinyl ketone followed by a N–O reductive cleavage and in situ intramolecular reductive amination. The stereochemistry of the obtained compounds is examined in relation to the reactions mechanism.     

Reductive amination of aldehydes and ketones to their corresponding amines with N-methylpyrrolidine zinc borohydride

A simple and convenient procedure for reductive amination of aldehydes and ketones using N-methylpyrrolidine zinc borohydride (ZBHNMP) as a reducing agent is described. The reactions are carried out with 1 equiv of amine and 1 equiv of aldehyde or ketone using 1 equiv of ZBHNMP in methanol under neutral conditions at room temperature.     

Synthesis of enantiopure β-amino amides via a practical reductive amination of the corresponding β-keto amides

A convenient and efficient reductive amination for the preparation of chiral β-amino amides is developed utilizing microwave heating. A variety of chiral β-keto amides react with ammonium acetate and sodium cyanoborohydride to afford the desired functionalized amines in good yields. This improved procedure takes advantage of microwave heating to significantly accelerate the reaction and offers a convenient and effective method to access some interesting molecules containing primary amine functionalities.     

Direct reductive amination of carbonyl compounds using bis(triphenylphosphine) copper(I) tetrahydroborate

A direct reductive amination protocol for aldehydes/ketones using bis(triphenylphosphine) copper(I) tetrahydroborate as a novel reducing agent in the presence of sulfamic acid has been developed. The reagent chemoselectively reduces the imine moiety and does not affect other reducible functionalities such as chloro, nitro, cyano and methoxy.     

Directed ortho-metalation versus reductive amination in the preparation of polytopic,highly substituted,and sterically congested amine-S-arylthiocarbamates as thiophenol precursors

The synthesis of polydentate amine-S-arythiocarbamates was tested by directed ortho-lithiation of 2,4-disubstituted thiophenols, or the corresponding O- and S-arylthiocarbamates by deprotonation or lithium–bromine exchange, followed by addition of the electrophiles N(CH₂CH₂X)₃ (X=Br, I). In the case of the thiophenol, deprotonation resulted in a trithioether-amine upon addition of the electrophile. With the O- and S-thiocarbamates, the reactions resulted in the migration of the thiocarbamoyl group to the ortho-position (Fries rearrangement), or nucleophilic attack of the carbonyl group by butyllithium, respectively. An alternative route employed 2,4-disubstituted phenols to obtain the corresponding salicylaldehydes, and subsequently the O-arylthiocarbamates for Newman–Kwart thermal rearrangement (NKR). Finally, the formyl group on the S-arylthiocarbamates allowed reductive amination to assemble polytopic compounds with amine and S-thiocarbamate groups.     

Intramolecular reductive amination strategy to the synthesis of (R)-N-Boc-2-hydroxymethylmorpholine, N-(3,4-dichlorobenzyl)(R)-2-hydroxymethylmorpholine, and (R)-2-benzylmorpholine

A concise high yielding enantioselective synthesis of (R)-N-Boc-2-hydroxymethylmorpholine, N-(3,4-dichlorobenzyl)(R)-2-hydroxymethylmorpholine, and (R)-benzylmorpholine has been achieved by employing proline-catalyzed asymmetric α-aminooxylation of aldehyde and palladium-catalyzed intramolecular reductive amination of azido aldehyde as the key steps.