新型亲水聚合物修饰硅胶颗粒固定化酶的制备及在蛋白质组鉴定中的应用

采用原子转移自由基聚合法制备了亲水聚合物修饰的硅胶颗粒作为一种新型固定化酶载体,在实现胰蛋白酶高密度固定的同时,显著降低了载体材料非特异性吸附导致的样品损失。因此,该固定化酶材料兼具高酶解效率和高回收率的特性。以标准蛋白质牛血清白蛋白(BSA)为样本,使用该固定化酶1 min即可完成酶解,鉴定到肽段对BSA的氨基酸序列覆盖率可达90%以上。该固定化酶材料成功应用于酵母菌全蛋白质复杂样本的酶解,从3 min酶解产物中鉴定到666个蛋白质,超过同样条件下溶液酶解12 h的鉴定结果。     

原子转移自由基聚合修饰银丝固定化酶反应器的制备及在蛋白质组鉴定中的应用

针对传统溶液酶解存在的酶解时间较长、酶自切物干扰以及蛋白酶不能重复使用等缺陷,通过电子转移生成催化剂的原子转移自由基聚合法修饰银丝,并以其为载体制备了一种新型的固定化酶反应器。用质谱考察了银丝固定化酶反应器(SW-Trypsin)的酶解效率、重复性和回收率。结果表明:绒毛状聚合物修饰的SW-Trypsin的酶解效率较高,酶解标准蛋白牛血清白蛋白(BSA)20 min后,肽段的氨基酸序列覆盖率可达93%,高于传统溶液酶解方法酶解16 h所得79%的覆盖率。使用该固定化酶反应器于一个月内8次酶解BSA所得的氨基酸序列覆盖率在89%到97%之间,平均覆盖率为94%,显示出良好的稳定性。另外,该固定化酶反应器酶解马心肌红蛋白(MYO)的回收率为87.67%。最后,用SW-Trypsin酶解腾冲嗜热菌全蛋白20 min,所鉴定到的氨基酸序列覆盖率和蛋白数量与同样条件下溶液酶解16 h的结果接近,且零漏切位点肽段的比例更高。加之容易分离的优点,SW-Trypsin在蛋白质组学的应用中具有良好的前景。     

新型核壳型亲水聚合物-硅胶杂化填料的合成及其在蛋白质N-糖链富集中的应用

蛋白质的N-糖基化修饰与多种重要的生理、病理进程密切相关,是多种重大疾病诊断标志物研究的热点。由于糖蛋白本身多是低丰度表达的蛋白质,且糖链结构具有高度微不均一性,这使得蛋白质糖基化修饰的分析具有一定的挑战。本研究利用表面引发-原子转移自由基聚合(SI-ATRP)法,以带有双键的氨基葡萄糖为单体(GMAG),成功制备了新型核壳型亲水聚合物-硅胶杂化填料(pGMAG-SiO₂)。由于在硅胶表面引入致密的亲水聚合物层,该填料不仅保持了硅胶良好的机械强度,而且显著提高了其亲水性,因此非常适合作为亲水填料用于蛋白质的N-糖链富集。以麦芽七糖和鸡卵清蛋白的N-糖链为研究对象,考察了该填料对N-糖链的富集效果,并将该杂化填料成功用于人血浆中糖蛋白N-糖链的富集检测,共鉴定了47种糖型。以上结果表明,pGMAG-SiO₂填料对N-糖链具有较高的亲和性,可以用于N-糖链的高覆盖率鉴定。     

原子转移自由基聚合法制备强阴离子交换色谱填料及其在蛋白质分离中的应用

在大孔硅胶表面引入原子转移自由基聚合的引发基团,通过该技术将甲基丙烯酰氧乙基三甲基氯化铵聚合于硅胶表面,制得了强阴离子交换色谱填料.详细考察了该填料对标准蛋白质的分离性能及流动相pH、流速、有机溶剂对蛋白质保留的影响.实验结果表明,在流速为0.75 mL/min时,采用线性梯度洗脱,20 min内可快速分离不同体系的三种标准蛋白;并将该填料用于鸡蛋中卵清蛋白的快速分离纯化,取得了很好的效果.     

大孔硅胶聚合物键合相的制备及其在蛋白质分离中的应用

大孔硅胶与乙烯基硅烷反应后，再与甲基 丙烯酸羟乙基酯和二乙烯基苯共聚成一种新型分离蛋白质的反相色谱填料。     

基于温敏型材料的固定化酶的制备及其在蛋白质组快速分析中的应用

蛋白质组学通过规模化鉴定、分析从细胞、组织或有机体中提取的蛋白质,从而获得蛋白表达、修饰、组成和定量的变化信息。在目前最为有效的“鸟枪法”蛋白质组学策略中,固定化酶试剂基质常用固相载体材料,该固定化酶试剂在酶解蛋白质时为异相体系,存在固液界面传质阻力和空间位阻,限制了酶解效率和样品处理通量。针对这一技术瓶颈,本研究利用温敏聚合物对外界温度变化的响应能力,制备了一种新型的基于可溶性温敏聚合物的固定化胰蛋白酶试剂。该固定化酶特有的温度敏感特性,使其具有“高温均相酶解,低温异相分离”的特色,且兼具酶切时间显著缩短、酶可重复利用的优势。 BSA 1 min固定化酶解产物肽段的氨基酸序列覆盖率可达94%,高于传统溶液酶解12 h所得覆盖率为(74%)。进一步将该固定化酶试剂应用于HeLa细胞全蛋白质组的酶解,其酶解效果与相同条件下溶液酶解12 h相当。该固定化酶试剂对复杂蛋白质的快速、高效酶解充分证明其在蛋白质组学研究中的应用潜力。     

活性自由基聚合(Iniferter)法制备聚合物包覆硅胶固定相及其色谱性能评价

应用活性自由基聚合法, 在接枝iniferter的硅球表面键合甲基丙烯酸异辛酯-co-乙二醇二甲基丙烯酸酯聚合层, 制备了聚合物包覆硅胶色谱固定相, 并研究了合成条件对于聚合层及分离效果的影响. 在一定聚合时间中, 接枝聚合物质量与反应时间呈线性关系, 并可以在得到聚合物包覆硅胶的基础上, 利用包覆硅胶中的iniferter再次引发接枝聚合, 体现了活性自由基聚合的特点. 聚合物包覆硅胶对于烷基苯同系物、碱性化合物及羟基苯甲酸酯具有很好的色谱分离能力及柱效, 同时, 由于聚合层能够有效地覆盖硅球表面的硅羟基, 减小了碱性化合物的拖尾. 研究工作提供了新的聚合物包覆硅胶固定相的合成方法.     

固定化胰蛋白酶整体小柱的制备及其用于微量蛋白质的快速酶解

发展了一种光引发聚合法制备固定化胰蛋白酶整体小柱的方法,以用于微量蛋白质的快速酶解。整体小柱由功能单体4-戊烯酸琥珀酰亚胺酯、甲基丙烯酸羟乙酯,交联剂季戊四醇三丙烯酸酯和三元致孔剂二甲基亚砜、N,N-二甲基甲酰胺、十二醇在20 μL的移液器吸头尖端原位聚合而成。形成整体柱后,胰蛋白酶分子通过氨基与琥珀酰亚胺酯反应实现固定化。系统研究了聚合溶液中活性酯含量与柱床体积对胰蛋白酶固载量的影响,评价了固定化酶整体小柱对标准蛋白细胞色素C和牛血清白蛋白的酶解效率,以及整体小柱的稳定性和重复性。结果表明,在离心辅助下,酶解过程可在10 min内完成,批次间具有良好的重复性。最后将固定化酶整体小柱应用于1×10⁵个人急性早幼粒白血病（NB4）细胞与人急性T细胞白血病（Jurkat T）细胞的快速酶解,经纳升级液相色谱与高分辨质谱联用分析后鉴定得到2489个和2572个蛋白质。相比于溶液状态下的酶解,分别提高了2.2%和6.1%的蛋白鉴定数量,展现了其在蛋白组学研究中的应用潜力。     

甲壳胺-硅胶复合载体的制备及其在脂肪酶固定化中的应用

固定化脂肪酶;甲壳胺-硅胶复合载体的制备及其在脂肪酶固定化中的应用     

含氟聚合物修饰碳纳米管及其聚氨酯复合疏水膜的研究

利用羟基碳纳米管上的羟基与2-溴异丁基酰溴之间的简单反应, 在碳纳米管上引入了含溴ATRP引发剂, 并进一步引发含氟丙烯酸酯的ATRP聚合, 从而在碳纳米管表面接枝上了低表面能的含氟聚合物. 红外光谱(FT-IR)、热重分析(TGA)和透射电镜(TEM)的研究结果表明碳纳米管与含氟聚合物之间为化学键连接. 以此低表面能聚合物包裹的碳纳米管作为填充粒子, 采用溶液浇铸方法制备了聚氨酯/碳纳米管复合膜, 并利用溶剂四氢呋喃(THF)刻蚀表面获得了不同碳纳米管裸露程度的复合膜材料. 静态接触角测试结果表明, 无论是羟基碳纳米管还是低表面能修饰的碳纳米管均可提高其复合膜的疏水性能, 且其疏水性能随碳纳米管含量的增加而增加; 相同含量时, 含氟聚合物接枝后的碳纳米管使复合膜具有更佳的疏水性能, 膜表面经溶剂刻蚀后可显著提高其疏水性能. 采用扫描电子显微镜(SEM)研究了加入碳纳米管和溶剂刻蚀对聚合物表面微观结构以及材料表面疏水性能的影响. 上述结果表明: 利用接枝聚合物可改变碳纳米管本身的疏水性能, 并可进一步制备新型的具有表面疏水性能的聚合物纳米复合材料.     

利用原子转移自由基聚合方法制备一种新型聚合物整体柱固相萃取材料初探

利用两步原子转移自由基聚合(ATRP)方法,初步建立了新型聚合物整体柱固相萃取(SPE)材料制备的新方法。首先利用ATRP方法,以乙二醇二甲基丙烯酸酯（EDMA）为交联剂,在室温条件下,在滤头中原位快速聚合制备得到负载有聚合物整体柱的萃取装置;然后采用表面诱导的电子转移活化再生原子转移自由基聚合(ARGET ATRP)方法进行表面修饰,得到了聚(二甲基氨基乙基甲基丙烯酸酯)(PDMAEMA)修饰的柱体;进一步将此整体柱用作萃取材料,实现了对激素类药物的富集分析。本研究表明:ATRP有望作为一种简单、有效及反应条件温和的聚合方法用于整体柱的制备,且该方法有潜力实现固相萃取材料在不同装置中的制备。     

Thermally modulated retention of lymphoctytes on polymer-brush-grafted glass beads

Thermoresponsive PIPAAm-brush-grafted glass beads are prepared through siATRP and their physicochemical properties are characterized by micro-nitrogen analysis, XPS, and contact angle measurements. The amount of grafted PIPAAm on glass bead surfaces can be controlled by varying the ATRP reaction time, leading to a modulation of the temperature-dependent wettability of the prepared surfaces. To evaluate a possible use of the beads as cell separation matrices, loading with rat lymphocytes from mesenteric lymph nodes is studied. The results show that the interaction between PIPAAm brushes and lymphocytes can be controlled by modulating PIPAAm brush length and temperature. The PIPAAm-brush-grafted beads might therefore be useful as effective cell separation matrices.     

NHS-ester functionalized poly(PEGMA) brushes on silicon surface for covalent protein immobilization

Poly(PEGMA) homopolymer brushes were developed by atom transfer radical polymerization (ATRP) on the initiator-modified silicon surface (Si-initiator). Through covalent binding, protein immobilization on the poly(PEGMA) films was enabled by further NHS-ester functionalization of the poly(PEGMA) chain ends. The formation of polymer brushes was confirmed by assessing the surface composition (XPS) and morphology (atomic force microscopy (AFM), scanning electronic microscopy (SEM)) of the modified silicon wafer. The binding performance of the NHS-ester functionalized surfaces with two proteins horseradish peroxidase (HRP) and chicken immunoglobulin (IgG) was monitored by direct observation. These results suggest that this method which incorporates the properties of polymer brush onto the binding surfaces may be a good strategy suitable for covalent protein immobilization.     

Hydrobromination of residual vinyl groups on divinylbenzene polymer particles followed by atom transfer radical surface graft polymerization

Rigid and monodisperse spherical polymer particles with 2.36 ± 0.18 μm diameter containing residual surface vinyl groups were prepared by photoinitiated precipitation polymerization of divinylbenzene. Anti‐Markovnikov addition of HBr to the surface vinyl groups yielded a 2‐bromoethyl functionality that was used as macroinitiator for atom transfer radical polymerization (ATRP), providing the possibility for further functionalization by controlled “grafting from” processes. This was demonstrated by grafting of glycidyl methacrylate brushes from the particle surface, using an ATRP system based on CuBr and pentamethyl diethylenetriamine. Existence of a methacrylic overlayer was verified by FTIR and XPS measurements, and the grafted particles were easily dispersed in water, confirming conversion of the particle surface from hydrophobic to hydrophilic. Hydrobromination of residual vinyl groups yields a macroinitiator that can be used for grafting of glycidyl methacrylate by ATRP. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 1259–1265, 2009     

Novel miktofunctional initiator for the preparation of an ABC‐type miktoarm star polymer via a combination of controlled polymerization techniques

An ABC‐type miktoarm star polymer was prepared with a core‐out method via a combination of ring‐opening polymerization (ROP), stable free‐radical polymerization (SFRP), and atom transfer radical polymerization (ATRP). First, ROP of ϵ‐caprolactone was carried out with a miktofunctional initiator, 2‐(2‐bromo‐2‐methyl‐propionyloxymethyl)‐3‐hydroxy‐2‐methyl‐propionic acid 2‐phenyl‐2‐(2,2,6,6‐tetramethyl‐piperidin‐1‐yl oxy)‐ethyl ester, at 110 °C. Second, previously obtained poly(ϵ‐caprolactone) (PCL) was used as a macroinitiator for SFRP of styrene at 125 °C. As a third step, this PCL–polystyrene (PSt) precursor with a bromine functionality in the core was used as a macroinitiator for ATRP of tert‐butyl acrylate in the presence of Cu(I)Br and pentamethyldiethylenetriamine at 100 °C. This produced an ABC‐type miktoarm star polymer [PCL–PSt–poly(tert‐butyl acrylate)] with a controlled molecular weight and a moderate polydispersity (weight‐average molecular weight/number‐average molecular weight < 1.37). The obtained polymers were characterized with gel permeation chromatography and ¹H NMR. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 4228–4236, 2004     

Eutectic mixtures as a green alternative for efficient catalyst recycling in atom transfer radical polymerizations

A new solvent mixture, based on ethanol/reline (EM: eutectic mixture), was investigated for the supplemental activator and reducing agent atom transfer radical polymerization (SARA ATRP) of methyl acrylate (MA) near room temperature, for the first time, affording complete catalyst recovery and reuse. The kinetic results revealed that the polymerizations were controlled, with polymers having narrow molecular weight distributions (? < 1.2). The “living” character of the resultant PMA was confirmed by the synthesis of a well‐defined PMA‐b‐PBA block copolymer. Remarkably, it was demonstrated that the Cu(0)/CuBr₂/Me₆TREN (Me₆TREN: tris[2‐(dimethylamino)ethyl]amine) could be recovered from the final reaction mixture and reused for new successful SARA ATRP of MA, suggesting that the reported system could be very attractive from both the economic and environmental perspectives. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2017 , 55 , 371–381     

The fast and the curious: High‐throughput experimentation in synthetic polymer chemistry

The application of automated synthetic parallel methods in polymer chemistry is described. A brief overview of all different polymerization techniques that have been used is provided. Furthermore, the equipment and methodologies that were used in our approach for automated parallel polymerization reactions are discussed followed by detailed insight into recent developments on automated cationic ring‐opening polymerization, atom transfer radical polymerization, and emulsion polymerizations. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 2425–2434, 2003     

Comparison of surface confined ATRP and SET‐LRP syntheses for a series of amino (meth)acrylate polymer brushes on silicon substrates

A series of poly(amino (meth)acrylate) brushes, poly(2‐(dimethylamino)ethyl methacrylate) (PDMAEMA), poly(2‐(diethylamino)ethyl methacrylate) (PDEAEMA), poly(2‐(dimethylamino)ethyl acrylate) (PDMAEA), poly(2‐(tert‐butylamino)ethyl methacrylate) (PTBAEMA), has been synthesized via surface‐confined controlled/living radical polymerizations using surface‐confined initiator from silane self‐assembled monolayers (SAMs) on silicon (Si) wafer substrates. Chemical methods and efficacies for two types of living radical polymerization, atom transfer radical (ATRP) and single electron transfer (SET‐LRP), are described and contrasted for the surface confined polymerization of poly(amino (meth)acrylate)s. Effects of solvent, catalyst/ligand system, and temperature on polymerization success were examined. Chemical compositions after each reaction step were characterized with FTIR spectroscopy, contact angle goniometry, and X‐ray photoelectron spectroscopy while the SAM and polymer brush thicknesses were measured with spectroscopic ellipsometry. For the first time, this study demonstrates successful surface‐confined polymerization of a series of poly(amine (meth)acrylate) brushes from Si‐SAM substrates using a copper metal electron donor catalyst. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 6552–6560, 2009