Synthesis and photophysical characterization of amphiphilic dendritic–linear–dendritic block copolymers

Amphiphilic dendritic–linear–dendritic triblock copolymers based on hydrophilic linear poly(ethylene oxide) (PEO) and hydrophobic dendritic carbosilane were synthesized with a divergent approach at the allyl end groups of diallyl‐terminated PEO. Their micellar characteristics in an aqueous phase were investigated with dynamic light scattering, fluorescence techniques, and transmission electron microscopy. The block copolymer with the dendritic moiety of a third generation could not be dispersed in water. The block copolymers with the first (PEO–D ‐Si‐1G) and second (PEO–D ‐Si‐2G) generations of dendritic carbosilane blocks formed micelles in an aqueous phase. The critical micelle concentrations of PEO–D ‐Si‐1G and PEO–D ‐Si‐2G, determined by a fluorescence technique, were 27 and 16 mg/L, respectively. The mean diameters of the micelles of PEO–D ‐Si‐1G and PEO–D ‐Si‐2G, measured by dynamic light scattering, were 170 and 190 nm, respectively, which suggests that the micelles had a multicore‐type structure. The partition equilibrium constants of pyrene in the micellar solution increased with the increasing size of the dendritic block (e.g., 7.68 × 10⁴ for PEO–D ‐Si‐1G and 9.57 × 10⁴ for PEO–D ‐Si‐2G). The steady‐state fluorescence anisotropy values (r) of 1,6‐diphenyl‐1,3,5‐hexatriene were 0.06 for PEO–D ‐Si‐1G and 0.09 for PEO–D ‐Si‐2G. The r values were lower than those of the linear polymeric amphiphiles, suggesting that the microviscosity of the dendritic micellar core was lower than that of the linear polymeric analogues. © 2001 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 39: 918–926, 2001     

Micelles with highly branched nanoporous interior: Solution properties and binding capabilities of amphiphilic copolymers with linear dendritic architecture

This article describes the solution behavior of model amphiphilic linear‐dendritic ABA block copolymers that self‐assemble in aqueous media and form micelles with highly branched nanoporous cores. The materials investigated are constructed of poly(ethylene glycol), PEG, with molecular weight 5,000 or 11,000 as the water‐soluble B block and poly(benzyl ether) monodendrons [G] of second and third generation as the hydrophobic A fragments. The process of self‐assembly in aqueous media and the character of the micellar core are investigated by fluorescence spectroscopy using pyrene as the molecular probe. The data obtained by different methods indicate that the critical micelle concentrations (cmc) for these systems are between 1.1 × 10⁻⁵ and 2.0 × 10⁻⁵ mol/L for [G‐2]‐PEG5000‐[G‐2] and between 7.08 × 10⁻⁶ and 7.94 × 10⁻⁶ mol/L for [G‐3]‐PEG11000‐[G‐3]. It is found that the ratio of the first and third vibronic bands (I₁/I₃ ) in the fluorescence spectrum of the encapsulated pyrene changes from 1.77 to 1.32 when the concentration of [G‐2]‐PEG5000‐[G‐2] increases from 1.1 × 10⁻⁶ mol/L to 1.1 × 10⁻⁴ mol/L. For [G‐3]‐PEG11000‐[G‐3] these changes are between 1.77 and 1.17 in the same concentration range. The hybrid copolymers form host‐guest complexes with several polyaromatic compounds (phenanthrene, pyrene, perylene and fullerene, C₆₀) that are stable over extended periods of time (more than 12 months). © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 2711–2727, 2000     

Temperature-sensitive dendritic micelles

Syntheses up to three generations have been achieved of biaryl-based amphiphilic dendrons with a charge-neutral pentaethylene glycol as the hydrophilic part and a decyl chain as the hydrophobic part. Studies on the temperature-dependent characteristics revealed that these dendrons exhibit a generation-dependent lower critical solution temperature (LCST). This behavior is attributed to the combination of the amphipathic nature of the hydrophilic pentaethylene glycol side chain and dendritic effect. Interestingly, this biaryl-based scaffold also maintains the ability to form a micelle-like assembly in polar solvents and an inverted micelle-like assembly in apolar solvents. Polarity of the dendritic interior was investigated using dye-based microenvironment studies. The aggregation behavior of these micelles was analyzed by fluorescence spectroscopy and dynamic light scattering. Critical micelle concentrations (CMC) of these assemblies were investigated using fluorescence excitation spectra of the sequestered guest molecule, pyrene.     

Synthesis and solution properties of anionic linear–dendritic block amphiphiles

The design and synthesis of novel linear–dendritic diblock amphiphiles with linear poly(acrylic acid) (PAA) as the hydrophilic block and dendritic poly(benzyl ether) as the hydrophobic block are described. The synthetic process consisted of two steps: a poly(methyl acrylate) (PMA)–poly(benzyl ether) dendrimer series were synthesized with atom transfer radical polymerization, and through the hydrolysis of linear PMA block into PAA, amphiphilic block copolymers, the PAA–poly(benzyl ether) dendrimer series, were obtained. The copolymers were characterized by ¹H NMR, Fourier transform infrared, and size exclusion chromatography and exhibited well‐defined architectures and low polydispersities. When the generation number of the dendritic block (G_i) less or equal to 3 and the degree of polymerization of the linear chain (n) was greater than 10, the amphiphiles were water‐soluble. The solution intrinsic viscosity increased with both the length of linear chain and the generation number of the dendritic block. The results obtained demonstrate that dendritic blocks play an unusual role in aqueous solutions of amphiphiles. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 4282–4288, 2000     

Well‐defined thermoresponsive dendritic polyamide/poly(N‐vinylcaprolactam) block copolymers

The first‐ and second‐generation well‐defined thermoresponsive amphiphilic linear–dendritic diblock copolymers based on hydrophilic linear poly(N‐vinylcaprolactam) and hydrophobic dendritic aromatic polyamide have been synthesized via reversible addition fragmentation chain transfer polymerization of N‐vinylcaprolactam by employing dendritic chain‐transfer agents possessing a single dithiocarbamate moiety at the focal point. These linear–dendritic copolymers exhibit reversible temperature‐dependent phase transition behaviors in aqueous solution as characterized by turbidity measurements using UV–vis spectroscopy. Their lower critical solution temperatures depend on the generation of the dendritic aromatic polyamides and the concentrations of the copolymer solutions. These amphiphilic copolymers are able to form nanospherical micelles in the aqueous solution as revealed by fluorescent spectroscopy, dynamic light scattering, and transmission electron microscope (TEM). The core–shell structure of micelles has been proved by ¹H NMR analyses of the micelles in D2O. The micelles loaded with indomethacin as a model drug showed high‐drug loading capacity and thermoresponsive drug release behavior. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2013, 51, 3240–3250     

Synthesis and self‐organization properties of copolyurethanes based on perylenediimide and naphthalenediimide units

A series of perylene and naphthalene diimide‐containing random copolyurethanes with different ratios of perylene/naphthalene diimide content was synthesized and characterized. Copolymerization improved the solubility of these rigid aromatic diimides, and the copolymers were soluble in common organic solvents like chloroform, tetrahydrofuran, and so forth. The absorption spectra of perylene‐based copolymers showed a red‐shifted peak at a wavelength of 557 nm corresponding to J‐type aggregates. For naphthalene copolymers, the quenching of fluorescence at higher naphthalene incorporation suggested the presence of aggregates because of the extensive π‐π stacking of the aromatic core. FTIR spectroscopic analysis showed that the hydrogen bonding tendency of the polymer decreased with increase in perylene/naphthalene incorporation. The fluorescence spectra of the perylene polymers were exactly a mirror image of the absorption spectra. The fluorescence spectra of the naphthalene polymers at higher naphthalene incorporation showed a red‐shifted excimer like emission peak, which was assigned as static excimers based on their excitation spectra. These polymers could exhibit two types of secondary interaction modes, namely, hydrogen bonding (via urethane linkage) and π‐stacking (via aromatic perylene or naphthalene units) thus highlighting the importance of polymer design in inducing self‐organization at both low and high incorporation of the rigid bisimide moieties. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 1224–1235, 2009     

Synthesis of novel asymmetric dendritic‐linear‐dendritic block copolymers via “living” anionic polymerization of ethylene oxide initiated by dendritic macroinitiators

The first synthesis of asymmetric dendritic‐linear‐dendritic ABC block copolymers, that contain a linear B block and dissimilar A and C dendritic fragments is reported. Third generation poly(benzyl ether) monodendrons having benzyl alcohol moiety at their “focal” point were activated by quantitative titration with organometallic anions and the resulting alkoxides were used as initiators in the “living” ring‐opening polymerization of ethylene oxide. The reaction proceeded in controlled fashion at 40–50 °C affording linear‐dendritic AB block copolymers with predictable molecular weights (M_w = 6000–13,000) and narrow molecular weight distributions (M_w/M_n = 1.02–1.04). The propagation process was monitored by size‐exclusion chromatography with multiple detection. The resulting “living” copolymers were terminated by reaction either with HCl/tetrahydrofuran or with a reactive monodendron that differed from the initiating dendron not only in size, but also in chemical composition. The asymmetric triblock copolymers follow a peculiar structure‐induced self‐assembly pattern in block‐selective solvents as evidenced by size‐exclusion chromatography in combination with multi‐angle light scattering. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 5136–5148, 2007     

Synthesis and characterization of soluble conjugated polymers having pyrene moiety in the main chain

Three new alternating conjugated polymers consisting of pyrene and 3‐dodecylthiophene ( PPyMT ), 4,4′‐didodecyl‐2,2′‐bithiophene ( PPyBT ), or 9,9‐didodecylfluorene ( PPyFlu ) moieties have been prepared using Suzuki coupling reaction or Sugimoto approaches. The polymers were readily soluble in common organic solvents and exhibited good thermal stability in nitrogen and air atmospheres. The structures and optical properties of the polymers were characterized by NMR, FTIR, XRD, UV–vis, and fluorescence spectroscopy. PPyMT and PPYBT showed blue‐light emission in solution, whereas PPyFlu performed blue‐light emitting in film state. The polymers exhibited an intermolecular aggregation and structural ordering due to pyrene–pyrene π–π stacking interaction. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2010     

Synthesis of hybrid dendritic‐linear block copolymers with dendritic initiators prepared by convergent living anionic polymerization

Hybrid dendritic‐linear block copolymers were made in one‐pot by convergent living anionic polymerization. Dendritic polystyrene macroinitiators were synthesized by slowly adding a mixture of either vinylbenzyl chloride (VBC) or 4‐(chlorodimethylsilyl)styrene (CDMSS) and styrene (1 : 10 molar ratio of coupling agent to styrene) to a solution of living polystyryllithium. The addition was ceased prior to the addition of a stoichiometric amount of coupling agent to retain a living chain end. To the living dendritically branched polystyrene was then added either styrene or isoprene to polymerize a linear block from the dendritic polystyrene. The resulting copolymers were characterized by gel permeation chromatography coupled with multiangle laser light scattering (GPC‐MALLS), which clearly demonstrated the formation of diblock copolymers. The diblock copolymers were further characterized by ¹H NMR, which showed the presence of the two blocks in the case of dendritic polystyrene‐block‐linear polyisoprene. The measurement of intrinsic viscosity showed that the dilute solution properties of the block copolymers are greatly influenced by the dendritic portion. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 39: 152–161, 2001     

Synthesis and MALDI‐TOF analysis of dendritic‐linear block copolymers of lactides: Influence of architecture on stereocomplexation

Formation of a stereocomplex from polylactide copolymers can be tuned by changing the size and the chain topology of the second block in the copolymer. In particular, the use of a dendritic instead of linear architecture is expected to destabilize the cocrystallisation of polylactide blocks. With this idea in mind, dendritic‐linear block copolymers were synthesized by ring‐opening polymerization (ROP) of lactides using benzyl alcohol dendrons of generation 1–3 as macroinitiators and stannous octoate as catalyst. Polymers with controlled and narrow molar mass distribution were obtained. The MALDI‐TOF mass spectra of these dendritic‐linear block copolymers show well‐resolved signals. Remarkably, 10% or less of odd‐membered polymers are present, indicating that ester‐exchange reactions which occur classically parallel to the polymerization process, were in these conditions, very limited. Thermal analysis of polyenantiomers of generation 1–3 and the corresponding blends were examined. The blend of a pair of enantiomeric dendritic‐linear block copolymers exhibit a higher melting temperature than each copolymer, characteristic for the formation of a stereocomplex. Melting temperatures are strongly dependent on the dendron generation. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 6782–6789, 2006     

Transition metal-catalyzed one-pot synthesis of water-soluble dendritic molecular nanocarriers

Here, we report the first example of transition metal-catalyzed one-pot synthesis of water-soluble dendritic molecular nanocarriers behaving like unimolecular micelles. Using the palladium-alpha-diimine chain walking catalyst, copolymerization of ethylene and comonomer 3 afforded, in one step, amphiphilic copolymer 1 having a hydrophobic core and a hydrophilic shell. A much larger amphiphilic core-shell copolymer 2 was synthesized by a two-step approach: a copolymer having many free hydroxyl groups was first prepared, which was subsequently coupled to poly(ethylene glycol) (PEG) to afford the copolymer 2. Light-scattering, fluorescence, and UV/vis spectroscopic studies with Nile Red in aqueous solution showed unimolecular micellar properties for both copolymers 1 and 2. The dye encapsulation capacity for the core-shell copolymers is nearly proportional to the molecular weight of the hydrophobic core. The unimolecular micellar properties coupled with the good water solubility and biocompatibility of the PEG moieties make these molecular nanocarriers promising candidates for many applications including drug delivery and controlled drug release.     

Characterization of amphiphilic hydrocarbon modified Poly(ethylene glycol) synthesized through ring-opening reaction of 2-(1-octadecenyl)succinic anhydride

Poly(ethylene glycol) (PEG) triblock and diblock amphiphilic block copolymers were synthesized from poly(ethylene glycol) and poly(ethylene glycol) monomethyl ether, respectively. The hydroxyl groups of PEG readily react with 2-(1-octadecenyl) succinic anhydride (OSA) at 140 °C through ring-opening reaction of the succinic anhydride. Both the PEG-OSA diblock and triblock copolymers are produced without use of any solvent or catalyst. The molecular structure of the copolymers was characterized by ¹H NMR and FTIR spectroscopy, and the thermal properties by DSC. The behavior of the copolymers in selective and nonselective solvents was studied by ¹H NMR spectroscopy in deuterium oxide and d-chloroform. The aggregation of the polymers in water was studied with a particle size analyzer and a transmission electron microscope (TEM) in bright field mode. The results show that the hydrophobic C₁₈ chain with intramolecular succinic anhydride linker can be attached to the hydrophilic PEG chain, an ester bond forming between the blocks. The copolymers exhibit flexible, liquid-like hydrophobic blocks even in water, which is a nonsolvent for OSA. PEG-OSA block copolymers self-organize in water, forming micellar polymer aggregates in nanoscale.     

The effect of dendritic pendants on the folding of amphiphilic copolymers via supramolecular interactions

The supramolecular folding of amphiphilic heterograft copolymers equipped with dendritic pendants is investigated using a combination of proton nuclear magnetic resonance (¹H NMR) spectroscopy, small‐angle X‐ray scattering, and circular dichroism spectroscopy. Hereto, the linear poly(ethylene glycol) pendants normally used to convey water compatibility are partially substituted with branched analogues. For one set of copolymers, second‐generation polyglycerol dendrons are directly attached to the polymer backbone, while for the other a hydrophilic linker is placed in between. The results show that the branching of the hydrophilic pendants affects the local structure of the folded copolymer but does not influence the overall conformation and single‐chain character of the folded copolymers in solution. All copolymers fold into 4–5 nm single‐chain polymeric nanoparticles with a very compact spherical morphology, independent of the dendritic content of the copolymer. Intriguingly, the incorporation of the dendritic pendants affects the formation of a structured interior even at low incorporation ratios. © 2018 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2019 , 57, 411–421     

Static light scattering,ultraviolet–visible,and fluorescence spectroscopy from fluorescent methyl methacrylate/benzazole dye copolymers displaying an intramolecular proton‐transfer mechanism in the electronically excited state

The solution behavior of new copolymers of methyl methacrylate and benzazole dyes emitting fluorescence because of an intramolecular proton‐transfer mechanism in the electronically excited state has been investigated by static light scattering, fluorescence spectroscopy, ultraviolet–visible, and gel permeation chromatography. In the dilute regime, with tetrahydrofuran (THF) and chloroform as solvents, the copolymers behave as typical polydisperse linear chains in good solvents. The analysis of the osmotic modulus for concentrated solutions in THF (c ≥ 60 g L^?1) indicates the existence of an interchain association mechanism. © 2003 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 41: 341–350, 2003     

Hyperbranched‐upon‐dendritic macromolecules as unimolecular hosts for controlled release

Novel amphiphilic hyperbranched‐upon‐dendritic polymers with a dendritic polyester core, a linear poly(ε‐caprolactone) (PCL) inner shell, and a hyperbranched polyglycerol outer shell have been prepared. The structures of the hyperbranched‐upon‐dendritic polymers were characterized by using NMR spectra. The critical aggregating concentrations (CACs) of those amphiphilic hyperbranched‐upon‐dendritic polymers were measured by using pyrene as the polarity probe. To study the encapsulation performances of those hyperbranched‐upon‐dendritic polymers as unimolecular hosts, inter‐molecular encapsulation was carefully prevented by controlling the host concentrations below their CACs and by washing with good organic solvents. The study on encapsulation of two model guest molecules, pyrene and indomethacin, was performed. The amounts of encapsulated molecules were dependent mainly on the size of inner linear shells. About three pyrene molecules or five indomethacin molecules were encapsulated in hyperbranched‐upon‐dendritic polymers with average PCL repeating units of two but different hyperbranched polyglycerol outer shells, whereas about five pyrene molecules or about 12 indomethacin molecules were encapsulated in those with PCL repeating units of nine. The encapsulated molecules could be released in a controlled manner. Thus, the hyperbranched‐upon‐dendritic polymers could be used as unimolecular nanocarriers with controllable molecular encapsulation dosage for controlled release. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 4013–4019, 2010     

Control of molecular aggregation in symmetrically substituted π‐conjugated bulky poly(p‐phenylenevinylene)s and their copolymers

A new series of symmetrically substituted bulky PPV‐copolymers based on poly(bis‐2,5‐(2‐ethylhexyloxy)‐1,4‐phenylenevinylene) ( BEH‐PPV ) bearing tricyclodecane (TCD) pendants were synthesized to study the effect of chain aggregation in the π‐conjugated polymer backbone. The composition of the copolymers was varied up to 100 mol % and the structures of the copolymer were confirmed by NMR and FTIR. The molecular weights of the copolymers were obtained as M_w = 11,500–1,78,800 depending on the TCD‐incorporation in BEH‐PPV. The origin of the π‐aggregation was investigated using mixture of solvents (polar or nonpolar) or temperature as external stimuli. Absorption, photoluminescence, and time‐resolved fluorescence decay techniques were employed as tools to trace molecular aggregation in solution and solid state. The TCD‐substituted bulky copolymers showed almost twice the enhancement in photoluminescence compared with that of BEH‐PPV . Solvent‐induced aggregation studies of copolymers revealed the existence of strong molecular aggregation in BEH‐PPV compared with that of bulky copolymers. Variable temperature studies further evidence for the reversibility of molecular aggregation on heating/cooling cycles and showed isosbetic points with respect to free and aggregated polymer chains. Time‐resolved fluorescent studies confirmed the existence of free and aggregated π‐conjugated species with a life time of 0.1 to 1.0 ns. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 2631–2646, 2009     

Synthesis,dynamic light scattering,and luminescence properties of copolymers containing iridium(III) bisterpyridine in the side chain

Supramolecular block‐random copolymers containing [Ir(terpy)₂]³⁺ in the side chain were synthesized via postfunctionalization of a P(S‐b‐AC_terpy) block copolymer. Absorbance and emission spectra compared to a model compound show that the polymer backbone has a minor effect on the polymer absorbance but produces a larger shift for the phosphorescence signals to higher wavelength. Dynamic light scattering of the metal complex containing copolymer studied in various solvents showed monomodal aggregation with decreasing aggregate size as the solvent dielectric constant increased. The copolymer precursor P(S‐b‐AC_terpy) shows multimodal aggregation in different solvents with the major population consisting of single chains. This difference in behavior between the two polymers is attributed to the electrolytic nature of the complex and the amphiphilicity induced by the charged metal complex. Supramolecular copolymers like these will continue to have interesting self‐organizational properties and may find applications in multicomponent systems for photoinduced charge separation processes. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 1109–1121, 2007     

Organoboronium amphiphilic block copolymers

A new class of amphiphilic organometallic block copolymers with cationic organoboron pendant groups was developed. Selective replacement of one of the bromine substitutents on each boryl group of the block copolymer PSBBr₂‐b‐PS with an organometallic reagent ArM (ArM = 2,4,6‐trimethylphenyl copper, 4‐t‐butylphenyltrimethyl tin) followed by treatment with 2,2′‐bipyridine gave the novel block copolymers [ 3Ar ](Br)_n as light yellow solid materials that show good stability in air and moisture and high solubility in most organic solvents. Their structure and composition were confirmed by multinuclear NMR, GPC, and elemental analysis. Highly regular micellar aggregates form in block‐selective solvents (e.g., MeOH, toluene) as demonstrated by ¹H NMR, dynamic light scattering, and transmission electron microscopy. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 6612–6618, 2009     

Controlling surfaces and interfaces with functional polymers: Preparation and functionalization of dendritic–linear block copolymers via metal catalyzed “living” free radical polymerization

The preparation and chemical modification of dendritic–linear block copolymers with surface functionalized dendritic components are presented. Isophthalate ester-functionalized dendrons featuring benzylic halide groups at their focal points have been used for the metal catalyzed “living” radical polymerization of styrene. The molecular weight of the dendritic–linear block copolymers determined by MALDI-TOF and Size Exclusion Chromatography was found to be accurately controlled up to molecular weights of ca. 30,000 a.m.u., with polydispersities less than 1.2. Subsequent functional group modifications of the peripheral ethyl ester groups of the dendritic block have been successfully carried out leading to carboxylic acids, butyl amides, benzyl alcohols, benzyl halides, and also accelerated generation growth via transesterification with a first generation dendritic alcohol. Several of these new dendritic–linear block copolymers exhibit interesting aggregation characteristics as evidenced by ¹H-NMR spectroscopic studies. © 1998 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 36: 1–10, 1998     

Entropic effects in mixed micelles formed by star/linear and star/star AB copolymers

The entropic effects in the comicellization behavior of amphiphilic AB copolymers differing in chain architecture of solvophilic A or solvophobic B parts are studied by means of molecular dynamics simulations. In particular, we studied linear/star and star/star copolymer mixtures. The properties of interest were the critical micelle concentration, the mean aggregation number, the shape of the micelle, which is expressed by the shape anisotropy, the thickness of the corona, and the solvophobic core radius. We found that the critical micelle concentration values for linear/star and copolymer mixtures show a positive deviation from the analytical predictions of the molecular theory of comicellization for chemically identical copolymers. This could be attributed to the effective interactions between copolymers originated from the architectural asymmetry. The effective interactions induce a small decrease in the aggregation number of preferential micelles in linear/star mixtures triggering the nonrandom mixing between the solvophilic moieties in the corona for all mixtures. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2015 , 53, 442–452