Synthesis and micellization of amphiphilic poly(sebacic anhydride)–poly(ethylene glycol)–poly(sebacic anhydride) block copolymers

Amphiphilic biodegradable block copolymers [poly(sebacic anhydride)–poly(ethylene glycol)–poly(sebacic anhydride)] were synthesized by the melt polycondensation of poly(ethylene glycol) and sebacic anhydride prepolymers. The chemical structure, crystalline nature, and phase behavior of the resulting copolymers were characterized with ¹H NMR, Fourier transform infrared, gel permeation chromatography, and differential scanning calorimetry. Microphase separation of the copolymers occurred, and the crystallinity of the poly(sebacic anhydride) (PSA) blocks diminished when the sebacic anhydride unit content in the copolymer was only 21.6%. ¹H NMR spectra carried out in CDCl₃ and D₂O were used to demonstrate the existence of hydrophobic PSA domains as the core of the micelle. In aqueous media, the copolymers formed micelles after precipitation from water‐miscible solvents. The effects on the micelle sizes due to the micelle preparation conditions, such as the organic phase, dropping rate of the polymer organic solution into the aqueous phase, and copolymer concentrations in the organic phase, were studied. There was an increase in the micelle size as the molecular weight of the PSA block was increased. The diameters of the copolymer micelles were also found to increase as the concentration of the copolymer dissolved in the organic phase was increased, and the dependence of the micelle diameters on the concentration of the copolymer varied with the copolymer composition. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 1271–1278, 2006     

Laser light scattering study of the degradation of poly(sebacic anhydride) nanoparticles

Poly(sebacic anhydride) (PSA) is biocompatible and degradable in basic media. We micronized this water‐insoluble polymer into stable polymeric nanoparticles via a microphase inversion. Such PSA nanoparticles degraded much faster than bulk PSA. The influence of the surfactant, temperature, and pH on the degradation of the PSA nanoparticles was investigated by a combination of static and dynamic laser light scattering. Under each condition, the degradation rate was nearly constant up to a 75% weight loss; that is, the degradation was close to zero‐order. The degradation rate increased with the pH and temperature. Biomedical applications of such PSA nanoparticles are suggested. © 2001 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 39: 703–708, 2001     

Fatty acid terminated polyanhydrides

A systematic study on the synthesis, characterization, degradation, and drug release of fatty acid terminated poly(sebacic acid) (PSA) is reported. Fatty acid terminated sebacic acid polymers were synthesized by melt condensation of acetate anhydrides of linear fatty acids (C8–C18) and sebacic anhydride oligomers to yield waxy off-white materials. Polymers with molecular weights (M_w) in the range of 9,000 and 5,000 were obtained for the 10% and 30% (weight ratio) containing fatty terminals, respectively. Up to about 30% of fatty acid terminals, the final product is mainly fatty terminated polymer with up to about 5% w/w of the symmetric fatty anhydride. Increasing amounts of fatty acid acetate anhydride in the polymerization mixture had little effect on the polymer molecular weight up to a ratio of 40 : 60 (fatty acid acetate : sebacic acid oligomer) which remains in the range of 5,000–8,000. Above this ratio the molecular weight dropped to a level of 2,000–3,000 and the percent of the symmetric anhydride increased to 10–40%. The fatty terminals had little effect on PSA melting point and crystallinity. However, the fatty terminals had a significant effect on the polymer degradation and drug release rate. PSA with 30% w/w of C14–C18 terminals degraded and released the incorporated drug for more than 4 weeks as compared with 10 days for the acetate-terminated PSA. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 3337–3344, 1999     

High density cationic polymer brushes from combined “click chemistry” and RAFT‐mediated polymerization

A simple method for preparing cationic poly[(ar‐vinylbenzyl)trimethylammonium chloride)] [poly(VBTAC)] brushes was used by combined technology of “click chemistry” and reversible addition‐fragmentation chain transfer (RAFT) polymerization. Initially, silicon surfaces were modified with RAFT chain transfer agent by using a click reaction involving an azide‐modified silicon wafer and alkyne‐terminated 4‐cyanopentanoic acid dithiobenzoate (CPAD). A series of poly(VBTAC) brushes on silicon surface with different molecular weights, thicknesses, and grafting densities were then synthesized by RAFT‐mediated polymerization from the surface immobilized CPAD. The immobilization of CPAD on the silicon wafer and the subsequent polymer formation were characterized by X‐ray photoelectron spectroscopy, water contact angle measurements, grazing angle‐Fourier transform infrared spectroscopy, atomic force microscopy, and ellipsometry analysis. The addition of free CPAD was required for the formation of well‐defined polymer brushes, which subsequently resulted in the presence of free polymer chains in solution. The free polymer chains were isolated and used to estimate the molecular weights and polydispersity index of chains attached to the surface. In addition, by varying the polymerization time, we were able to obtain poly(VBTAC) brushes with grafting density up to 0.78 chains/nm² with homogeneous distributions of apparent needle‐like structures. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Synthesis and characterization of novel degradable photocrosslinked poly(ether‐anhydride) networks

New degradable poly(ether‐anhydride) networks were synthesized by UV photopolymerization. Dicarboxylated poly(ethylene glycol) (PEG) or poly(tetramethylene glycol) (PTMG) was reacted with an excess of methacrylic anhydride to form dimethacrylated macromers containing anhydride linkages. The percent of conversion for the macromer formation was more than 80% at 60 °C after 24 h. ¹H NMR and IR spectroscopies show the presence of anhydride linkages in the macromer. In vitro degradation studies were carried out at 37 °C in PBS with crosslinked polymer networks formed by UV irradiation. All PEG‐based polymers degraded within 2 days, while PTMG‐based polymers degraded by 50% of the initial weight after 14 days. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 1277–1282, 2000     

Studies on hydrolytic degradation of poly(ester-anhydride)s based on oligosuccinate and aliphatic diacids

This paper describes synthesis, characteristics and hydrolytic degradation of functional poly(ester-anhydride)s based on oligo(3-allyloxy-1,2-propylene succinate) (OSAGE) and aliphatic diacids (DA). The polymers were obtained by polycondensation of OSAGE with adipic (ADP), sebacic (SBA) or dodecanedicarboxylic acid (DDC). The carboxyl groups in OSAGE and in diacids were converted to mixed anhydride groups by acetylation with acetic anhydride. After that, prepolymers thus obtained were condensed in vacuum to yield poly(ester-anhydride)s. The structure of copolymers was confirmed by NMR spectroscopy. Influence of the kind of diacid and the OSAGE to diacid ratio on selected properties of poly(ester-anhydride)s were examined. Poly(ester-anhydride)s were subjected to hydrolytic degradation at 37 °C, in aqueous phosphate buffer solution of pH 7.41 (PBS). The course of degradation was monitored by determination of weight loss of samples, ¹H NMR and DSC. Fracture surfaces of samples during degradation were examined by scanning electron microscopy.     

Synthesis and Characterization of New Functional Poly(ester-anhydride)s Based on Succinic and Sebacic Acids

Summary: New functional poly(ester-anhydride)s with allyl pendant groups in the side chains were obtained by polycondensation of sebacic acid (SBA) and poly(3-allyloxy-1,2-propylene succinate) (OSAGE) terminated with carboxyl groups. The carboxyl groups in OSAGE and in SBA were converted to mixed anhydride groups by acetylation with acetic anhydride. After that, prepolymers obtained were condensed in vacuum to yield higher molecular weight poly(ester-anhydride)s. The influence of SBA and OSAGE content in poly(ester-anhydride)s on their selected properties e.g. molecular weight, thermal and solubility characteristics as well as degradation rate and mode, were examined. Poly(ester-anhydride)s were degraded in aqueous buffer of pH 7.4 at 37 °C. The hydrolytic degradation was monitored by determination of weight loss of samples and by determination of ester to anhydride groups ratio.     

Facile synthesis of nanoparticles via assembly of photopolymerized and self‐crosslinked random copolymers in selective organic media

We report the facile synthesis of vesicular nanoparticles via self‐assembly of random copolymers in selective organic solvents. The polymers were synthesized via photopolymerization in bulk from acryloyl chloride (AC) containing a small amount of hydrolyzed acrylic acid (AA) at ambient condition. Fourier transform infrared spectroscopy of the photopolymerized product revealed two main chemical components: poly(acryloyl chloride) (PAC) and acid anhydride. The later peak intensified when increasing the initial AA composition in the monomer solution, suggesting that the hydrolyzed AC contributed to the formation of crosslinked anhydride, leading to amphiphilicity of the polymer with solvophobic anhydride and solvophilic PAC chains. At an optimal UV dosage (2000 mJ cm^?2), vesicular nanoparticles (～90 nm in diameter) were obtained from polymers assembled in acetone. The particle size and morphology were confirmed by scanning electron microscopy, transmission electron microscopy, and dynamic and static light‐scattering measurements. Further, we found that the random copolymers self‐organized into vesicles in merely good solvents of PAC chains, including acetonitrile, tetrahydrofuran, and 1,4‐dioxane, but became aggregated and precipitated out in poor solvents of PAC, such as isopropanol, ethanol, toluene, xylene, and hexane. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Grafting of poly(ε‐caprolactone) onto maghemite nanoparticles

We report the coating of maghemite (γ‐Fe₂O₃) nanoparticles with poly(ε‐caprolactone) (PCL) through a covalent grafting to technique. ω‐Hydroxy‐PCL was first synthesized by the ring‐opening polymerization of ε‐caprolactone with aluminum isopropoxide and benzyl alcohol as a catalytic system. The hydroxy end groups of PCL were then derivatized with 3‐isocyanatopropyltriethoxysilane in the presence of tetraoctyltin. The triethoxysilane‐functionalized PCL macromolecules were finally allowed to react on the surface of maghemite nanoparticles. The composite nanoparticles were characterized by diffuse reflectance infrared Fourier transform (DRIFT) spectroscopy, thermal gravimetric analysis (TGA) and differential scanning calorimetry (DSC). Effects of the polymer molar mass and concentration on the amount of polymer grafted to the surface were investigated. Typical grafting densities up to 3 μmol of polymer chains per m² of maghemite surface were obtained with this grafting to technique. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 6011–6020, 2004     

Poly(ester anhydride)s prepared by the insertion of ricinoleic acid into poly(sebacic acid)

New degradable poly(ester anhydride)s were prepared by the melt polycondensation of diacid oligomers of poly(sebacic acid) (PSA) transesterified with ricinoleic acid. The transesterification of PSA with ricinoleic acid to form oligomers was conducted via a melt bulk reaction between a high molecular weight PSA and ricinoleic acid. A systematic study on the synthesis, characterization, degradation in vitro, drug release, and stability of these polymers was performed. Polymers with weight‐average molecular weights of 2000–60,000 and melting temperatures of 24–77 °C were obtained for PSA containing 20–90% (w/w) ricinoleic acid. NMR and IR analyses indicated the formation of ester bonds along the polyanhydride backbone. These new degradable copolymers have potential use as drug carriers. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 1059–1069, 2003     

Surface‐initiated atom transfer radical polymerization grafting of poly(2,2,2‐trifluoroethyl methacrylate) from flat silicon wafer surfaces

Poly(2,2,2‐trifluoroethyl methacrylate) (PTFEMA), a partially fluorinated polymer, was directly grafted from silicon wafer surfaces by a surface‐initiated atom‐transfer radical polymerization (ATRP). The polymer layer thickness increased linearly with monomer conversion and molecular weight of free polymers in solution. The thickness was mainly determined by the experimental conditions such as activator/deactivator ratio, monomer/catalyst ratio, and monomer concentration. PTFEMA layers of more than 100‐nm thick were obtained. The grafted PTFEMA chains were “living” and allowed the extension of a second block of PMMA. X‐ray photoelectron spectroscopy study showed that the chemical compositions at the surfaces agreed well with their theoretical values. A novel surface‐attachable difunctional initiator was also synthesized and applied to the grafting of PTFEMA. The grafting density was doubled using this difunctional initiator, from 0.48 to 0.86 chains/nm². © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 1252–1262, 2006     

Poly(ester amide)s derived from glycine,even‐numbered diols,and dicarboxylic acids: Considerations on the packing

A new sequential poly(ester amide) derived from 1,12‐dodecanediol, sebacic acid, and glycine was synthesized and characterized. Its crystalline structure was studied with transmission electron microscopy and X‐ray diffraction. The results were compared with results for a related polymer, derived from glycine, 1,6‐hexanediol, and succinic acid, that produced a lower methylene/carbonyl ratio. The crystalline structures of both polymers corresponded to a periodic arrangement of two layers of hydrogen‐bonded molecular chains, whose polymethylene sequences mimicked the packing of polyethylene and the majority of polyesters. © 2001 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 39: 1036–1045, 2001     

Crosslinked poly(ester anhydride)s based on poly(ε‐caprolactone) and polylactide oligomers

Resorbable poly(ester anhydride) networks based on ε‐caprolactone, L ‐lactide, and D,L ‐lactide oligomers were synthesized. The ring‐opening polymerization of the monomers yielded hydroxyl telechelic oligomers, which were end‐functionalized with succinic anhydride and reacted with methacrylic anhydride to yield dimethacrylated oligomers containing anhydride bonds. The degree of substitution, determined by ¹³C NMR, was over 85% for acid functionalization and over 90% for methacrylation. The crosslinking of the oligomers was carried out thermally with dibenzoyl peroxide at 120 °C, leading to polymer networks with glass‐transition temperatures about 10 °C higher than those of the constituent oligomers. In vitro degradation tests, in a phosphate buffer solution (pH 7.0) at 37 °C, revealed a rapid degradation of the networks. Crosslinked polymers based on lactides exhibited high water absorption and complete mass loss in 4 days. In ε‐caprolactone‐based networks, the length of the constituent oligomer determined the degradation: PCL5‐AH, formed from longer poly(ε‐caprolactone) (PCL) blocks, lost only 40% of its mass in 2 weeks, whereas PCL10‐AH, composed of shorter PCL blocks, completely degraded in 2 days. The degradation of PCL10‐AH showed characteristics of surface erosion, as the dimensions of the specimens decreased steadily and, according to Fourier transform infrared, labile anhydride bonds were still present after 90% mass loss. © 2003 The Authors. Journal of Polymer Science Part A: Polymer Chemistry Published by Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 3788–3797, 2003     

Functionalization of iron oxide magnetic nanoparticles with poly(methyl methacrylate) brushes via grafting‐from atom transfer radical polymerization

A key problem with nanomaterials is the difficulty of controlling the dispersion of nanoparticles inside an organic medium. To overcome this problem, functionalization of the nanoparticle surface is required. Poly(methyl methacrylate) (PMMA) brushes were grown on the surface of iron oxide magnetic nanoparticles with atom transfer radical polymerization and a grafting‐from approach. Modified magnetic nanoparticles with a graft density of 0.1 PMMA chains/nm² were obtained. Cu(II), used as a deactivating complex, allowed good control of the polymerization along with a narrow polydispersity of the polymer chains. The functionalized magnetic nanoparticles were characterized with Fourier transform infrared spectroscopy, thermogravimetric analysis, gel permeation chromatography, and atomic force microscopy. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 925–932, 2007     

Study of the thermal degradation of poly(furfuryl methacrylate) by thermogravimetry

The thermal degradation of poly(furfuryl methacrylate) (PFM) has been studied by means of dynamic thermogravimetric analysis (TGA) in the temperature range 100–600°C under nitrogen and oxygen atmospheres at various heating rates, and the apparent activation energy for the interval 230–340°C corresponding to the first degradation step was determined. Isothermal TGA at 250°C, 275°C and 300°C was carried out and the apparent activation energy values obtained were compared with those determined in dynamic experiments. The residues from isothermal degradation experiments were analysed by infrared spectroscopy and the results seem to indicate that in the thermal degradation of PFM the formation of cyclic structures of 2,4-dimethylglutaric anhydride occurs in the macromolecular chains, together with partial depolymerization of polymer segments, as well as intermolecular crosslinking through oxidation of the C---H bond in position 5 of some furfuryl rings.     

The molecular structure of poly(biphenyl dianhydride-p-phenylenediamine) polyimide thin films by infrared spectroscopy: Thickness dependence of structure in the nano- to micrometer range

The molecular structure of poly[biphenyl dianhydride-p-phenylenediamine] (BPDA–PDA) polyimide in ultrathin (3–300 nm) films on silicon has been characterized by polarized infrared spectroscopy in conjunction with ellipsometry and X-ray reflectivity measurements. In spite of the high degree of crystalline packing of the polymer chains, the results show that an unexpected and significant content of imide rings exhibit local structural perturbations, including out-of-plane twisting. Further, the fraction of perturbed rings increases with increasing film thickness while, in contrast, the high degree of in-plane uniaxial film symmetry and planar stacking of the chains remain constant with thickness. These results reveal a new structural aspect of localized ring disorder that arises within the otherwise well-ordered, chain-stacked structure of BPDA–PDA polyimide films. © 1998 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 36: 1247–1260, 1998     

Functionalization of poly(ethylene terephthalate) in the melt state: Chemical and rheological aspects

This article deals with a new way of improving the melt viscosity of linear poly(ethylene terephthalate) (PET) chains through the reaction of the PET end groups (alcohol and acid) with new chain extenders, 3‐(triethoxysilyl)propylsuccinic anhydride (ASSI) and 3‐glycidoxypropyltrimethoxysilane, during the melt processing of PET. The reactions, investigated with model compounds monomethylterephthalate and triethylene glycol monomethylether for PET? COOH and ? OH end groups, respectively, by multinuclear NMR spectroscopy (¹H, ¹³C, and ²⁹Si), provided evidence of well‐known acid–epoxide and alcohol–anhydride reactions, respectively. In addition, numerous other species appeared because of the presence of alkoxysilane groups, such as alcohol–alkoxysilane exchange reactions, acyloxysilane formation, and hydrolysis–condensation reactions of alkoxysilane. All these reactions led to the formation of branched chains when transposed to PET melt modification. A size exclusion chromatography analysis and the rheological behavior confirmed the presence of branched structures embedded in shorter linear PET chains. The rheological behavior of this blend was drastically modified in comparison with that of neat PET; consequently, there was an important increase in the zero‐shear viscosity, with a maximum concentration of branched structures of about 17 vol % obtained with an ASSI/PET molar ratio of 4. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 2207–2223, 2005     

Antifouling poly(vinylidene fluoride) ultrafiltration membranes containing amphiphilic comb polymer additive

An amphiphilic comb polymer consisting of poly(vinylidene fluoride‐co‐chlorotrifluoroethylene) [P(VDF‐co‐CTFE)] main chains and poly(oxyethylene methacrylate) (POEM) side chains was synthesized using direct initiation of the chlorine atoms in CTFE units through atom transfer radical polymerization, as confirmed by ¹H NMR and FTIR spectroscopy. The P(VDF‐co‐CTFE)‐g‐POEM comb polymer was introduced as an additive to prepare poly(vinylidene fluoride) antifouling ultrafiltration membranes. As the contents of comb polymer increased, the mechanical properties of membranes slightly decreased due to the decreased crystallinity of the membranes, as revealed by universal testing machine and X‐ray diffraction. However, water contact angle measurement and X‐ray photoelectron spectroscopy showed that the hydrophilic POEM segments spontaneously segregated on the membrane surfaces. As a result, the antifouling property of the membranes containing P(VDF‐co‐CTFE)‐g‐POEM comb polymer was considerably improved with a slight change of water flux. © 2009 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 48: 183–189, 2010     

Perfluoro(methylcyclohexane) plasma polymer thin film: Growth,surface morphology,and properties investigated by scanning thermal microscopy

Scanning thermal microscopy (SThM) has been used for the visualization and characterization of an ultrathin plasma polymer film of perfluoro(methylcyclohexane) at a submicrometer level. The morphology, molecular dynamics, and lateral homogeneity of the ultrathin film have all been examined precisely with SThM. The growth of the plasma polymer film on a silicon wafer (Si‐wafer) has also been precisely determined using a new burning‐hole technique. © 2005 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 43: 1392–1400, 2005     

Complexation of poly(acrylic acid) and poly(ethylene oxide) investigated by enhanced Rayleigh scattering method

The method of enhanced Rayleigh scattering spectroscopy (ERS) was developed to investigate the complexation of poly(acrylic acid) (PAA) and poly(ethylene oxide) (PEO) in semidilute polymer solutions. Based on the Ornstein‐Zernike equation, the relationship between macromolecular static correlation length and ERS intensity was presented. Moreover, the ERS spectra were calculated by the moving window two‐dimensional (MW2D) correlation spectroscopy to get detailed information of the polymer complexation. The results indicated that the ERS spectroscopy characteristics of the polymer mixtures have similar trend, and the ERS intensity promptly increases as the macromolecular chains contract. The increase of ERS intensity showed that the degree of complexation between PAA and PEO increases when the pH value decreases. The complexation results from the collapse of macromolecular chains, which is induced by the PAA chains contracting and the enhanced association between PAA and PEO chains because of the hydrogen bond formation. In addition, the association resulting from the complexation of PAA and PEO in solution was demonstrated by the MW2D correlation spectroscopy. © 2010 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 48: 1847–1852, 2010