Nitroxide‐mediated controlled statistical copolymerizations of N‐isopropylacrylamide with N‐tert‐butylacrylamide

The copolymerization of N‐isopropylacrylamide (NIPAM) and N‐tert‐butylacrylamide (TBAM) via conventional radical polymerization and nitroxide‐mediated polymerization (NMP) with N‐tert‐butyl‐N‐[1‐diethylphosphono‐(2,2‐dimethylpropyl)]nitroxide (SG1) was investigated. The monomer reactivity ratios were determined to be 0.58 and 1.00 for NIPAM and TBAM, respectively. The reactivities were approximately the same at 120 and 60 °C in N,N‐dimethylformamide (DMF) and toluene, respectively, for the conventional copolymerizations and in DMF at 120 °C for NMP. Controlled/living characteristics for NMP were achieved with a 2,2′‐azobisisobutyronitrile/SG1 bimolecular system and a unimolecular polystyrene [poly(STY)]–SG1 macroinitiator in the presence of excess free SG1. Block copolymers of poly(N‐isopropylacrylamide‐stat‐N‐tert‐butylacrylamide) [poly(NIPAM‐stat‐TBAM)] with styrene {poly(N‐isopropylacrylamide‐stat‐N‐tert‐butylacrylamide)‐block‐polystyrene [poly(NIPAM‐stat‐TBAM)‐block‐poly(STY)]} were obtained by chain extension of either poly(NIPAM‐stat‐TBAM)–SG1 with styrene or poly(STY)–SG1 with NIPAM/TBAM. A comparison of the number‐average molecular weight calculated from the end‐group content with the number‐average molecular weight measured by gel permeation chromatography for poly(NIPAM‐stat‐TBAM)‐block‐poly(STY)–SG1 indicated that nearly all poly(NIPAM‐stat‐TBAM) chains were capped by SG1 and were thus living. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 6410–6418, 2006     

Microstructure determination of methyl methacrylate and n‐butyl acrylate copolymers synthesized by atom transfer radical polymerization with two‐dimensional NMR spectroscopy

Copolymers of methyl methacrylate (MMA) and n‐butyl acrylate (n‐BA) were synthesized under atom transfer radical polymerization (ATRP) conditions. The molar infeed ratio was varied to obtain copolymers with different compositions. Methyl 2‐bromo propionate was used as the initiator with CuBr/Cu(0)/N,N,N′,N″,N″‐pentamethyldiethylenetriamine as the catalyst at 60 °C. Molecular weight distribution was determined by gel permeation chromatography (GPC). Copolymer compositions (F_M) were calculated from ¹H NMR spectra. Reactivity ratios calculated with the Mao–Huglin terminal model at a high conversion were found to be r_M = 2.17 and r_B = 0.47. The polymerization mechanism was studied with the α‐methyl region of MMA. The backbone methylene and carbonyl carbons of both MMA and n‐BA units were found to be compositionally as well as configurationally sensitive. Complete spectral assignments were performed with the help of heteronuclear single quantum coherence (HSQC) spectroscopy along with total correlated spectroscopy (TOCSY). Further, the assignments of the carbonyl region were made with the help of heteronuclear multiple quantum coherence (HMBC) spectroscopy. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 1100–1118, 2005     

Chain transfer to solvent in the radical polymerization of N‐isopropylacrylamide

Chain transfer to solvent has been investigated in the conventional radical polymerization and nitroxide‐mediated radical polymerization (NMP) of N‐isopropylacrylamide (NIPAM) in N,N‐dimethylformamide (DMF) at 120 °C. The extent of chain transfer to DMF can significantly impact the maximum attainable molecular weight in both systems. Based on a theoretical treatment, it has been shown that the same value of chain transfer to solvent constant, C_tr,S, in DMF at 120 °C (within experimental error) can account for experimental molecular weight data for both conventional radical polymerization and NMP under conditions where chain transfer to solvent is a significant end‐forming event. In NMP (and other controlled/living radical polymerization systems), chain transfer to solvent is manifested as the number‐average molecular weight (M_n) going through a maximum value with increasing monomer conversion. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Decomposition of model alkoxyamines in simple and polymerizing systems. II. Diastereomeric N‐(2‐methylpropyl)‐N‐(1‐diethyl‐phosphono‐2,2‐dimethyl‐propyl)‐aminoxyl‐based compounds

Thermal reactions of the alkoxyamine diastereomers DEPN‐R′ [DEPN: N‐(2‐methylpropyl)‐N‐(1‐diethylphosphophono‐2,2‐dimethyl‐propyl)‐aminoxyl; R′: methoxy‐carbonylethyl and phenylethyl] with (R,R) + (S,S) and (R,S) + (S,R) configurations have been investigated by ¹H NMR at 100 °C. During the overall decay the diastereomers interconvert, and an analytical treatment of the combined processes is presented. Rate constants are obtained for the cleavage and reformation of DEPN‐R′ from NMR, electron spin resonance, and chemically induced dynamic nuclear polarization experiments also using 2,2,6,6‐tetramethylpiperidinyl‐1‐oxyl (TEMPO) as a radical scavenger. The rate constants depend on the diastereomer configuration and the residues R′. Simulations of the kinetics observed with styrene and methyl methacrylate containing solutions yielded rate constants for unimeric and polymeric alkoxyamines DEPN‐(M)_n‐R′. The results were compatible with the known DEPN mediation of living styrene and acrylate polymerizations. For methyl methacrylate the equilibrium constant of the reversible cleavage of the dormant chains DEPN‐(M)_n‐R′ is very large and renders successful living polymerizations unlikely. Mechanistic and kinetic differences of DEPN‐ and TEMPO‐mediated polymerizations are discussed. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 3264–3283, 2002     

Controlled polymerization of N‐isopropylacrylamide with an activated methacrylic ester

A copolymer of N‐isopropylacrylamide with the N‐hydroxysuccinimide ester of methacrylic acid has found use in a variety of applications. Here we report our efforts to gain control over the molecular weight distribution of this copolymer with controlled radical polymerization methods, such as atom transfer radical polymerization, reversible addition–fragmentation transfer (RAFT), and nitroxide‐mediated polymerization. We have found that RAFT is capable of affording these copolymers with a polydispersity index of 1.1–1.2. Our results for all three polymerizations are reported. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 6340–6345, 2004     

Terpolymerization kinetics of amino acid N‐carboxy anhydrides

Based on their versatility with respect to amino acid type and sequence, polypeptides have become attractive for a number of biological applications such as drug delivery, biomineralization, and drugs. N‐carboxy anhydride (NCA) polymerization is a convenient way to rapidly prepare high‐molecular weight polypeptides with good control over molecular weight and polydispersity. However, the kinetics of the incorporation of NCA monomers into copolypeptides during random copolymerization are poorly understood. Here, kinetic data is presented that allows insight into the NCA polymerization of a terpolymer composed of three commercially relevant amino acids, namely, glutamic acid, lysine, and tyrosine. Furthermore, kinetic data and copolymerization parameters from the copolymerization of binary mixtures of these three amino acid NCAs is used to make predictions of the terpolymer composition. This study provides access to the information necessary to prepare functional copolypeptides with better‐defined sequence architecture that will be essential for the future development of polypeptide‐based materials. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 1228–1236     

Monitoring Microgel Synthesis by Copolymerization of N‐isopropylacrylamide and N‐vinylcaprolactam via In‐Line Raman Spectroscopy and Indirect Hard Modeling

Functionalized microgels are typically based on structured copolymers, whose synthesis necessitates knowledge of interactions between different monomer units. This contribution presents in‐line Raman and turbidity monitoring of copolymer microgels based on monomers N‐vinylcaprolactam (VCL) and N‐isopropylacrylamide (NIPAM). During reaction, in‐line Raman spectra are evaluated via multivariate indirect hard modeling (IHM) regression, utilizing pure component models based on parameterized peak functions. To account for variation in Raman baseline intensity, the linear IHM baseline is replaced by a curved baseline, resulting in calibration R² above 0.98 and root‐mean‐squared errors of cross‐validation below 0.12 wt%. Spectra taken in‐line during microgel syntheses reveal NIPAM to react slower than VCL in homopolymerization, but faster than VCL in copolymerization. This effect can be used for synthesis of functional microgels, that is, with tunable volume phase transition temperature. This effect is not visible from turbidity measurements, demonstrating the advantage of in‐line Raman monitoring of chemical components in polymerization processes.     

Poly(isobornyl methacrylate‐co‐methyl acrylate): Synthesis and stereosequence distribution analysis by NMR spectroscopy

Copolymerization of isobornyl methacrylate and methyl acrylate ( I/M ) is performed by atom transfer radical polymerization using methyl‐2‐bromopropionate as an initiator and PMDETA/CuBr as catalyst under nitrogen atmosphere at 70 °C. The copolymer compositions determined from ¹H NMR spectra are used to determine reactivity ratios of the monomers. The reactivity ratio determined from linear Kelen–Tudos method and non‐linear error‐in‐variable method, are r_I = 1.25 ± 0.10, r_M = 0.84 ± 0.08 and r_I = 1.20, r_M = 0.82, respectively. 1D, distortion less enhancement by polarization transfer and 2D, heteronuclear single quantum coherence, and total correlation spectroscopy NMR experiments are employed to resolve highly overlapped and complex ¹H and ¹³C{¹H} NMR spectra of the copolymers. The carbonyl carbon of I and M units and methyl carbon of I unit are assigned up to triad compositional and configurational sequences, whereas β‐methylene carbons are assigned up to tetrad compositional and configurational sequences. Similarly, methine carbon of I unit is assigned up to triad level. The couplings of carbonyl carbon and quaternary carbon resonances are studied in detail using 2D hetero nuclear multiple bond correlation spectra. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Initiator‐fragment incorporation radical copolymerization of divinylbenzene and N‐isopropylacrylamide with dimethyl 2,2′‐azobisisobutyrate: Formation of soluble hyperbranched polymer nanoparticle

The copolymerization of divinylbenzene (DVB) and N‐isopropylacrylamide (NIPAm) with dimethyl 2,2′‐azobisisobutyrate of a concentration as high as 0.50 mol/L proceeded homogeneously without any gelation at 80 °C in N,N‐dimethylformamide, where the concentrations of DVB and NIPAm were 0.15 and 0.50 mol/L. The copolymer yield increased with time and leveled off over 50 min. Although DVB was consumed more rapidly than NIPAm, both comonomers were completely consumed in 50 min. The homogeneous polymerization system at 80 °C involved electron spin resonance‐observable propagating polymer radicals, the total concentration of which increased with time. The resulting copolymer was soluble in tetrahydrofuran, chloroform, acetone, ethyl acetate, acetonitrile, N,N‐dimethylformamide, dimethyl sulfoxide, and methanol, but insoluble in benzene, n‐hexane, and water. The copolymer showed an upper critical solution temperature (50 °C on cooling) in a methanol–water [11:3 (v/v)] mixture. Dimethyl 2,2′‐azobisisobutyrate fragments as high as 37–45 mol % were incorporated as terminal groups in the copolymers through initiation and primary radical termination. The contents of DVB and NIPAm were 10–30 mol % and 30–50 mol %, respectively. The intrinsic viscosity of the copolymer was very low (0.09 dL/g) at 30 °C in tetrahydrofuran despite high weight‐average molecular weight (1.2 × l0⁶ by multi‐angle laser light scattering). These results indicate that the copolymer was of hyperbranched structure. By transmission electron microscopy observation, the individual copolymer molecules were visualized as nanoparticle of 6–20 nm. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 1609–1617, 2004     

A Comparative Study of Methyl Methacrylate/Butyl Acrylate Copolymerization Kinetics by Atom‐Transfer and Conventional Radical Polymerization

Methyl methacrylate and butyl acrylate monomers are copolymerized by atom‐transfer radical polymerization, affording polymers with well‐controlled molecular weight and low polydispersity. A kinetic analysis of this system is compared with the corresponding free‐radical polymerization system. The copolymerization rate follows an opposite trend to that observed in conventional copolymerization. This fact is attributed to a smaller population of radicals generated in the reaction, since the relative fraction of propagating radicals is the same as that in classical copolymerization.     

Copolymerization of N‐vinylcaprolactam and glycidyl methacrylate: Reactivity ratio and composition control

Free‐radical copolymerizations of N‐vinylcaprolactam (VCL) and glycidyl methacrylate (GMA) were investigated to synthesize temperature‐responsive reactive copolymers with minimized compositional heterogeneity. The average copolymer composition was determined by Fourier transform infrared and nuclear magnetic resonance techniques. The reactivity ratios for VCL and GMA were found to be 0.0365 ± 0.0009 and 6.44 ± 0.36 by the Fineman–Ross method and 0.039 ± 0.006 and 6.75 ± 0.29 by the Kelen–Tudos method, respectively. When prepared by batch polymerization, VCL–GMA copolymers had a highly heterogeneous composition and fractions of different solubilities in water. The use of a gradual feeding technique, which included the sequential addition of more reactive GMA monomer into the reaction, yielded copolymers with much more homogeneous composition. The produced copolymers with 0.9 and 0.11 fractional GMA contents preserved their temperature‐responsive properties and precipitated from aqueous solutions when the temperature exceeded 31 °C. The GMA units in the VCL–GMA copolymers were capable of reacting with amino end‐functionalized poly(ethylene oxide) at room temperature to produce poly(N‐vinylcaprolactam)–poly(ethylene oxide) graft copolymers. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 183–191, 2006     

Radical Ring‐Opening Polymerization Behavior of 1,1‐Dicyano‐2‐Vinylcyclopropane and Its Copolymerization with 1‐Cyano‐1‐Ester‐2‐Vinylcyclopropane

Radical ring‐opening polymerization of 1,1‐dicyano‐2‐vinylcyclopropane 1 was performed in benzonitrile to find the corresponding homopolymer 2 soluble in organic solvents was successfully obtained while that in other solvents gave crosslinked and thus insoluble homopolymer. In addition, 1 underwent radical copolymerization with 1‐cyano‐1‐ester‐2‐vinylcyclopropanes 3 and 4 to afford the corresponding copolymers 7 and 8 . By increasing the content of the 1 ‐derived unit in the resulting copolymers, the solubility of the copolymers in organic solvents became lower and the residual weights at 600 °C and their glass transition temperatures became higher. © 2019 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2019, 57, 1723–1729     

Heterotactic‐specific radical polymerization of N‐isopropylacrylamide and phase transition behavior of aqueous solution of heterotactic poly(N‐isopropylacrylamide)

Radical polymerization of N‐isopropylacrylamide (NIPAAm) in toluene at low temperatures, in the presence of fluorinated‐alcohols, produced heterotactic polymer comprising an alternating sequence of meso and racemo dyads. The heterotacticity reached 70% in triads when polymerization was carried out at ?40 °C using nonafluoro‐tert‐butanol as the added alcohol. NMR analysis revealed that formation of a 1:1 complex of NIPAAm and fluorinated‐alcohol through C?O···H? O hydrogen bonding induces the heterotactic specificity. A mechanism for the heterotactic‐specific polymerization is proposed. Examination of the phase transition behavior of aqueous solutions of heterotactic poly(NIPAAm) revealed that the hysteresis of the phase transition between the heating and cooling cycles depended on the average length of meso dyads in poly(NIPAAm). © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 2539–2550, 2009     

Poly(ionic liquid)s derived from 3‐octyl‐1‐vinylimidazolium bromide and N‐isopropylacrylamide with tunable properties

A new series of linear and crosslinked copolymers, obtained from 3‐octyl‐1‐vinylimidazolium bromide (VImBr) and N‐isopropylacrylamide (NIPAAm), were prepared by radical polymerization. Namely, VImBr was synthesized from 1‐bromooctane and an ionic liquid such as 1‐vinylimidazole. NIPAAm was used because it gives raise to well known thermoresponsive (co‐)polymers. The copolymers were thoroughly characterized by means of ¹H NMR and ¹³C NMR spectroscopies. Besides, differential scanning calorimetry, Fourier transform infrared spectroscopy, and scanning electron microscopy were also used. Moreover, the swelling behavior and the thermoresponsive properties of the corresponding hydrogels were studied. It was found that the VImBr incorporation into the copolymers does have a dramatic influence on both the thermal properties of the dried materials and the lower critical solution temperature of the corresponding hydrogels. In detail, the glass transition temperature was dependent on the monomer ratios, and ranged from 5 to 155 °C. Analogously, the lower critical solution temperature of the resulting hydrogels ranged from less than 10 up to 38 °C, thus including the physiological temperature. NMR spectroscopies, which were performed on the linear polymers, indicated that the monomers exhibit an alternating tendency resulting in a microstructure in which blocks are not present, at least when the two monomers are in equimolar amounts. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 3521–3532     

Kinetic analysis of surface‐initiated SET‐LRP of poly(N‐isopropylacrylamide)

The single‐electron transfer living radical polymerization (SET‐LRP) of N‐isopropylacrylamide (NIPAM) from silicon wafer modified with an initiator layer composed of 2‐bromopropionyl bromide (2‐BPB) fragments is described. The amount of Cu(0) generated in situ by the disproportination of Cu(I) to Cu(0) and Cu(II) in the presence of 2,2′‐bipyridine (2,2′‐bpy) ligand and N,N‐dimethylformamide (DMF) solvent at 90 °C is dependent on the ratio of [CuBr]/[CuBr₂]. By proper selection of the [CuBr]/[CuBr₂] ratio, well‐controlled SET‐LRP polymerization of NIPAM was observed such that the thickness of the layer consisting of chains grown from the surface increased linearly with the molecular weight of chains polymerized in solution in identical. In addition, the calculation of grafting parameters, including surface coverage, σ (mg/m²); grafting density, Σ (chain/nm²); and average distance between grafting sites, D (nm), from the number‐average molecular weight, M _n (g/mol), and ellipsometric thickness, h (nm), values indicated the synthesis of densely grafted poly(NIPAM) films and allowed us to predict a “brush‐like” conformation. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2010