Structure and Properties of Nanocomposites Based on SBS Block Copolymer and Alumina

The addition of inorganic filler into commodity plastics has a long history. Today, polymer composites based on nanosized filler are popular among polymer scientists from academia and industries due to their ability to enhance a number of physical properties. In this work, we investigate the dispersion and reinforcing effect of alumina nanoparticles using a polystyrene-polybutadiene based block copolymer (SBS) and organically modified alumina nanofiller. With the aid of solution casting procedures, polymer composites with good dispersion of nanoparticles could be produced. It has been demonstrated that with suitably coated nanoparticles, polymer composites with optimum dispersion of nanofiller ensuring marked reinforcement effect can be achieved.     

Epoxidation of partially hydrogenated styrene-butadiene block copolymers using peracetic acid in a cyclohexane/water heterogeneous system

The preparation of partially saturated lightly functionalized styrene-butadiene block copolymers of polyA-block-polyB-block-polyA type (SBS) is described. The work involves epoxidizing partially hydrogenated SBS block copolymers using peracetic acid in a cyclohexane/water heterogeneous system. Five partially hydrogenated model polymers containing low levels of unsaturated aliphatic double bonds were used to study the epoxidation reaction and kinetics. The existence of the epoxide functional group on the product polymer was evidenced by IR and ¹H-NMR spectra and the epoxide concentration was determined by direct titration. The partially hydrogenated SBS copolymers were more difficult to epoxidize than the unhydrogenated ones. The temperature dependence of the epoxidation rate was studied and the activation energy was determined as 8.8 kcal/mole of double bonds. © 1996 John Wiley & Sons, Inc.     

Liquid crystalline side-group block copolymers with triblock structure: Investigations on the influence of the block arrangement on the morphology and the LC-phase behavior

Liquid crystalline triblock copolymers with LC inner block and amorphous outer blocks have been synthesized by “living” anionic polymerization and investigated using DSC, TEM, and small-angle x-ray diffraction. All samples of poly[styrene-block-2-(3-cholesteryloxycarbonyloxy) ethyl methacrylate-block-styrene] (PS-b-PChEMA-b-PS) show liquid crystalline behavior and phase separation between the blocks. Compared to triblock copolymers with PS inner block (PChEMA-b-PS-b-PChEMA) and diblock copolymers (PS-b-PChEMA) the LC block copolymers with PS outer blocks have the same properties. The LC behavior and the morphology do not depend on the block arrangement; they are only influenced by the volume fractions of the blocks. Those samples in which the liquid crystalline subphase is not continuous (spheres) only a nematic phase was found, whereas in all samples with a continuous liquid crystalline subphase, the smectic A phase of the homopolymer was observed. © 1996 John Wiley & Sons, Inc.     

Method of determining the degree of branching from the gel permeation chromatogram for star-shaped SBS thermoplastic block copolymers

A novel GPC calculation method has been developed for characterizing star-shaped styrene–butadiene block copolymers (SBS). This method enables us to determine the degree of branching (number of arms per molecule) of the synthesized polymer without the need of a priori measurement of the true molecular weights of the SBS star polymer and its linear polymeric arm. To illustrate the simplicity of this method, nearly monodispersed three-arm and four-arm model star polymers have been purposely synthesized by linking living diblock polymeric arms of the polystyrene-block-polybutadiene type with silicon tetrachloride as the multifunctional linking agent. The good agreement between the degree of branching calculated from the GPC chromatogram and that actually measured by MALL (multiple angle laser light scattering) has corroborated the validity of the calculation method. © 1997 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 35 : 3393–3401, 1997     

Effect of Epoxidation of Diene Component of SBS Block Copolymer on Morphology and Mechanical Properties

In this work, the polybutadiene (PB) block of an asymmetric lamellae forming polystyrene/polybutadiene based triblock copolymer was epoxidized to different extent in order to study its effect on morphology and mechanical behaviour of the copolymer. The products were analyzed by means of different microscopic techniques, Fourier transform infrared (FTIR) spectroscopy and microhardness measurements. It was found that the microphase separation behavior and hence the mechanical properties of the materials were drastically altered through epoxidation of the diene block of the styrene/diene triblock copolymer. With the increase in the extent of epoxidation the lamellar structure changed to distorted lamellae and then to disordered domains. Consequently, inhomogeneous mechanical performance of the samples was observed at higher degree of chemical modification.     

Thermodynamics of the deformation of segmented polyurethanes with various percentages of hard block I. The initial deformation

The thermodynamic analysis of the uniaxial stretching of the polybutadiene polyurethanes of various compositions and mechanical history was carried out using deformation calorimetry. The initial small strain deformation was found to result from the volume elasticity of the hard phase. Samples containing up to 50% of the hard block behave like typical thermoelastoplastics, which are characterized by the plastic-to-rubber transition and large reversible deformations. More rigid samples behave similar to typical solid crystalline polymers aboveT _g.It is great pleasure for us to dedicate this paper to Prof. Dr. H.-G. Kilian on the occasion of his 60th birthday.     

Three models for chain conformation of block copolymers in solution and in solid state

Solution properties of polystyrene-poly(methyl methacrylate) (PS-PMMA) diblock copolymer, polystyrene-poly(tertiobutyl methacrylate) (PS-PtBuMA) diblock copolymer, and poly(ethylene oxide)-polystyrene-poly(ethylene oxide) (PEO-PS-PEO) triblock copolymer have been measured by viscometry. The PEO-PS-PEO copolymer has been studied also in solid state by differential scanning calorimetry and by optical microscopy. All the block copolymers present a conformational transition in solution at a given temperature region which is relatively narrow. If below this transition temperature a copolymer adopts a segregated conformation (dumb-bell model), above this transition adopts a nonsegregated or pseudo-gaussian conformation, and vice versa. In the transition temperature region the copolymer adopts a compressed segregated conformation (core and shell model). If the passage from the solution to the solid state is performed in a given constant temperature in which the copolymer presents a segregated or nonsegregated conformation the same conformation is observed in the solid state (memory effect). © 1996 John Wiley & Sons, Inc.     

Glass transitions in crosslinked epoxy networks

Epoxy resins of DGEBA type were thermally cured with diaminodiphenylmethane as crosslinking agent, and then analysed by Differential Scanning calorimetry (DSC) at various heating rates in order to determine the glass transition temperatureT _g of the final networks. First it was shown that during cyclingT _g is shifted towards higher values up to a maximum or . Such a change is attributed to an increasing extent of cure which develops during the thermal analysis, and also to relaxation processes thermally activated inside the polymeric matrix. Then the dependence of on the heating rateq imposed by the DSC apparatus was presented forq changing from 0.1 to10C min^–1. At heating rates exceeding 3C min^–1 only the classical temperatureT _g was detected, but at smallerq values, an additional endothermic transition was revealed, located at higher temperature and linked to a physical aging-like phenomenon, which takes place at low heating rates. The plot of against logq is divided into two quasi-linear parts on each side ofq=3C min^–1. In conclusions, an equation was given to describe the vs. logq function.     

Phase separation in a poly(ether sulfone) modified epoxy-amine system studied by temperature modulated differential scanning calorimetry and dielectric relaxation spectroscopy

The phase separation induced by the curing reaction of an epoxy based on diglycidylether of bisphenol A (DGEBA) with methylene dianiline (MDA) modified with poly(ether sulfone) (PES) at a concentration of 20 wt% was studied by temperature modulated differential scanning calorimetry (TMDSC) and dielectric relaxation spectroscopy (DRS). The effect of phase separation on the curing kinetics and vitrification phenomena is analysed. The dependence of the log of the measuring frequency on the degree of conversion allows the correlation between the dipolar relaxation of each phase and the vitrification observed by TMDSC to be established.     

Two-dimensional chromatography applied to the study of the thermo-oxidative degradation of poly(styrene-b-butadiene) star block copolymers

Two-dimensional chromatography with gradient polymer elution chromatography in the first dimension and gel permeation chromatography in the second dimension was used to characterize a poly(styrene-b-butadiene) star block copolymer. The data evidence several populations that are clues left by the different steps in the sequential reaction employed to make the polymer. The sample was subjected to thermo-oxidative degradation at 180°C and was analyzed at different times during the process. After a relatively long induction period, the two-dimensional chromatograms show how the different populations are progressively degraded via random chain scission of the polybutadiene block to leave essentially polystyrene as the only soluble component. With longer thermal aging times, the polystyrene also degrades via chain scission.     

Phase behavior in mixtures of a homopolymer and a block copolymer 1. FTIR and DSC studies

Miscibility in blends of three styrene-butadiene-styrene and one styrene-isoprene-styrene triblock copolymers containing 28%, 30%, 48%, and 14% by weight of polystyrene, respectively, with poly(vinyl methyl ether) (PVME) were investigated by FTIR spectroscopy and differential scanning calorimetry (DSC). It was found from the optical clarity and the glass transition temperature behavior that the blends show miscibility for each kind of triblock copolymers below a certain concentration of PVME. The concentration range to show miscibility becomes wider as the polystyrene content and molecular weight of PS segment in the triblock copolymers increase. From the FTIR results, the relative peak intensity of the 1100 cm^-1 region due to COCH₃ band of PVME and peak position of 698 cm^-1 region due to phenyl ring are sensitive to the miscibility of SBS(SIS)/PVME blends. The results show that the miscibility in SBS(SIS)/PVME blends is greatly affected by the composition of the copolymers and the polystyrene content in the triblock copolymers. Molecular weights of polystyrene segments have also affected the miscibility of the blends. ©1995 John Wiley & Sons, Inc.     

Reversibility of the low‐temperature transitions of polytetrafluoroethylene as revealed by temperature‐modulated differential scanning calorimetry

Temperature‐modulated differential scanning calorimetry reveals distinct differences in the kinetics of the low‐temperature phase transitions of polytetrafluoroethylene. The triclinic to trigonal transition at 292 K is partially reversible as long it is not complete. As soon as the total sample is converted, supercooling is required to nucleate the reversal of the helical untwisting involved in the transition. The trigonal phase can be annealed in the early stages after transformation with a relaxtion time of about 5 minutes. The dependence of the reversing heat capacity on the modulation amplitude, after a metastable equilibrium has been reached, is explained by a non‐linear, time‐independent increase of the heat‐flow rate, perhaps caused by an increased true heat capacity. The order‐disorder‐transition at 303 K from the trigonal to a hexagonal condis phase is completely reversible and time‐independent. It extends to temperatures as low as the transition at 292 K or even lower. Qualitatively, the thermal history and crystallization conditions of polytetrafluoroethylene do not affect the transition kinetics, that is, melt‐crystallized film and as‐polymerized powders show similar transition behaviors, despite largely different crystallinities. © 2001 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 39: 750–756, 2001     

Phase Transition and Phase Transformation in Block Copolymer Nanoparticles

Block copolymer nanopaticles were prepared from the mixture solutions containing good/poor solvents by a simple evaporation process. The block copolymers formed disorder, unidirectionally stacked lamellar, and onion‐like structures in nanoparticles depending on preparation temperatures. Thermal annealing induced the disorder‐order phase transition and order‐order phase transformation in the block copolymer nanoparticles, even though the annealing temperature is lower than the of one polymer segment. The unusual thermal behaviors suggest that the glass transition temperature of the block copolymer is decreased by the effect of nanoparticle, whose surface areas are larger than their volumes.

     

Phase behavior in mixtures of a homopolymer and a block copolymer. 4. SALS and SAXS studies

Phase behavior of blends of poly(vinyl methyl ether) (PVME) with four styrene-butadiene-styrene (SBS) triblock copolymers, being of various molecular weights, architecture, and compositions, was investigated by small-angle light scattering. Small-angle X-ray scattering investigation was accomplished for one blend. Low critical solution temperature (LCST) and a unique phase behavior, resembling upper critical solution temperature (UCST), were observed. It was found that the architecture of the copolymer greatly influenced the phase behavior of the blends. Random phase approximation theory was used to calculate the spinodal phase transition curves of the ABA/C and BAB/C systems; LCST and resembling UCST phase behavior were observed as the parameters of the system changed. Qualitatively, the experimental and the theoretical results are consistent with each other. © 1996 John Wiley & Sons, Inc.     

Induction of periodic nanostructures in polythiophene films through block copolymer templating

A new class of periodically nanostructured polythiophene materials with high regularity and numerous morphologies is prepared through the cooperative self‐assembly of polythiophene derivatives with a templating block copolymer (BCP) and poly(1,4‐isoprene)‐block‐poly(methacrylic acid) (PMA). The selection of the hydrophilic and aprotic triethylene glycol (TEG) group as side chains on polythiophene and the use of hydrophilic and protic PMA are crucial to producing well‐ordered nanostructures in polythiophene films, as it enables selective coassembly within the hydrophilic domain through hydrogen bonding. The composite films are shown to have formed hexagonally packed cylinders with 28 nm periodicities based on small‐angle X‐ray scattering and transmission electron microscopy. The formation of hydrogen bonding is revealed by a shift in the carbonyl peak of PMA in the Fourier transform infrared spectra of the composite film relative to the neat film. This suggests that the TEG‐functionalized polythiophene selectively incorporates into PMA. © 2019 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2019 , 57, 1105–1112     

Equilibrium and non-equilibrium phase transitions studied by adiabatic calorimetry

An adiabatic calorimetry was used for some investigations of equilibrium and non-equilibrium phase transitions. For one of the substances studied (4,4′-di-n-heptyloxyazoxybenzene) it was possible to determine temperature dependence of an order parameter and number of clusters of high temperature phase in a region of a phase transition. For another substance (liquid 3,4 dimethylpiridine) an anomaly on the specific heat curves was interpreted as being responsible for a decay of molecules’ clusters. Non-equilibrium phase transitions were investigated for some liquid crystal substances. The process of transformation between metastable and stable phases was described quantitatively. The conclusions obtained concern the stability of metastable phases.     

Synthesis and Characterization of Amphiphilic Block Copolymer by Block Copolymerization of Butadiene and Acrylamide using Macroazoinitiator

Abstract

Macroazoinitiator (MAI) was prepared from hydroxyl‐terminated polybutadiene (HTPB) and 4,4′‐azobis‐4‐cyanopentanoic acid by direct polycondensation in the presence of 1‐methyl‐2‐chloropyridinium iodide at room temperature. This MAI used for block copolymerization of AAm at 60°C gave the best results in chloroform but the formation of a crosslinked product could not be ruled out in dioxane. It was inferred that for production of a linear block copolymer, homogeneous reaction mixture was required.

The resulting products were characterized by spectral studies IR and NMR, viscosity measurements. Distinct phase segregation of hydrophobic and hydrophilic blocks was evident through DSC analysis.     

Polymorphous transitions in cocoa butter</o:p>

Summary Large experimental evidence was collected on polymorphous transitions of triacyl glycerols (TAG) in cocoa butter by means of DSC investigations. The cooling treatment (in conditions close to those of the industrial practice) and the annealing temperature significantly affect the overall crystal fraction and the distribution of the various polymorphs. These data allowed a quantitative, although purely phenomenological, kinetic parameterization of polymorphous transitions of cocoa butter. The evaluation of the relevant kinetic constants and their dependence on the temperature allowed prediction of the yield in every polymorph after a given thermal history. Similar evidences were attained for cocoa liquor and dark chocolate where TAG are sided by other ingredients. These results can be the basis for an industrial exploitation.</o:p>     

Poly(styrene‐b‐isobutylene) multiarm star‐block copolymers

Multiarm star‐branched polymers based on poly(styrene‐b‐isobutylene) (PS‐PIB) block copolymer arms were synthesized under controlled/living cationic polymerization conditions using the 2‐chloro‐2‐propylbenzene (CCl)/TiCl₄/pyridine (Py) initiating system and divinylbenzene (DVB) as gel‐core‐forming comonomer. To optimize the timing of isobutylene (IB) addition to living PS⊕, the kinetics of styrene (St) polymerization at −80°C were measured in both 60 : 40 (v : v) methyl cyclohexane (MCHx) : MeCl and 60 : 40 hexane : MeCl cosolvents. For either cosolvent system, it was found that the polymerizations followed first‐order kinetics with respect to the monomer and the number of actively growing chains remained invariant. The rate of polymerization was slower in MCHx : MeCl (k_app = 2.5 × 10⁻³ s⁻¹) compared with hexane : MeCl (k_app = 5.6 × 10⁻³ s⁻¹) ([CCl]_o = [TiCl₄]/15 = 3.64 × 10⁻³M; [Py] = 4 × 10⁻³M; [St]_o = 0.35M). Intermolecular alkylation reactions were observed at [St]_o = 0.93M but could be suppressed by avoiding very high St conversion and by setting [St]_o ≤ 0.35M. For St polymerization, k_app = 1.1 × 10⁻³ s⁻¹ ([CCl]_o = [TiCl₄]/15 = 1.82 × 10⁻³M; [Py] = 4 × 10⁻³M; [St]_o = 0.35M); this was significantly higher than that observed for IB polymerization (k_app = 3.0 × 10⁻⁴ s⁻¹; [CCl]_o = [Py] = [TiCl₄]/15 = 1.86 × 10⁻³M; [IB]_o = 1.0M). Blocking efficiencies were higher in hexane : MeCl compared with MCHx : MeCl cosolvent system. Star formation was faster with PS‐PIB arms compared with PIB homopolymer arms under similar conditions. Using [DVB] = 5.6 × 10⁻²M = 10 times chain end concentration, 92% of PS‐PIB arms (M_n,PS = 2600 and M_n,PIB = 13,400 g/mol) were linked within 1 h at −80°C with negligible star–star coupling. It was difficult to achieve complete linking of all the arms prior to the onset of star–star coupling. Apparently, the presence of the St block allows the PS‐PIB block copolymer arms to be incorporated into growing star polymers by an additional mechanism, namely, electrophilic aromatic substitution (EAS), which leads to increased rates of star formation and greater tendency toward star–star coupling. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 1629–1641, 1999