The thermal decomposition of zirconium oxyhydroxide

The thermal decomposition of zirconium oxyhydroxides prepared by the mixture of aqueous zirconium oxychloride solutions and aqueous solutions of sodium hydroxide or ammonium hydroxide under various conditions has been examined by thermogravimetry, differential thermal analysis, X-ray diffraction study and infrared spectrophotometry. As a result, it is seen that the thermal decomposition of zirconium oxyhydroxide, in which the composition is ZrO_2-x(OH)_2xyH₂O where x2 and 1y<2, proceeds according to the following process:

Preparation and thermal decomposition of indium hydroxide

Summary Indium hydroxides were prepared by the mixing of aqueous indium nitrate solution with sodium or ammonium hydroxide solutions under various conditions. The thermal decomposition of the resulting materials was examined by thermogravimetry, differential thermal analysis, X-ray diffraction study and infrared spectroscopy. It has been found that sodium hydroxide solution is more suitable than the addition of ammonium hydroxide solution to prepare indium hydroxide in well crystallization; the thermal decomposition of indium hydroxide, in which the composition is In(OH)₃·xH₂O where x￡2, proceeds according to the following process: In(OH)₃·xH₂O?cubic In(OH)₃?cubic In₂O₃     

Effect of iron-containing catalysts on thermal decomposition of cured GAP-AP propellants

The effects of various burning rate catalysts on thermal decomposition of cured glycidyl azide polymer (GAP)-ammonium perchlorate (AP) propellants have been studied by means of thermal analysis and a modified vacuum stability test (MVST). Four types of iron-containing catalysts examined in this paper are catocene, ferrocenecarboxaldehyde (FCA), ferrocene, and ferric oxide. Results of differential thermal analysis (DTA) and thermogravimetric analysis (TG) revealed that the catalysts play an important role in the decomposition of both AP and GAP. The peak decomposition temperature (T _m) of DTA curves and onset decomposition temperature (T _o) of TG patterns considerably shifted to a lower temperature as the concentration of catalysts increased in the propellants. The endothermic temperature of AP, however, is unaffected by the presence of burning rate catalysts in all cases. The activation energy of decomposition of the propellants in range of 80 to 120°C is determined, based on the MVST results.     

Thermal decomposition of PTFE in the presence of silicon,calcium silicide,ferrosilicon and iron

Simultaneous TG/DTA has been used to study the thermal decomposition of binary compositions containing polytetrafluoroethene (PTFE) with silicon (Si), calcium silicide (CaSi₂), ferrosilicon (FeSi) or iron (Fe) powders. In nitrogen and under dynamic heating program the thermal decomposition of Si/PTFE and CaSi₂/PTFE is an exothermic process. The other two compositions decompose endothermically. In each case the decomposition reactions show first-order kinetics but only iron does not change considerably the kinetics of PTFE depolymerization. The constants of the decomposition rate at 850 K for silicon containing reducers are about four times higher than those of PTFE and Fe/PTFE. This revised version was published online in July 2006 with corrections to the Cover Date.     

Analysis of the thermal decomposition of commercial vegetable oils in air by simultaneous TG/DTA

This work presents a study of the thermal decomposition of commercial vegetable oils and of some of their thermal properties by termogravimetry (TG), derivative termogravimetry (DTG) and by differential thermal analysis (DTA). Canola, sunflower, corn, olive and soybean oils were studied. A simultaneous SDT 2960 TG/DTA from TA Instruments was used, with a heating rate of 10 K min^-1 from 30 to 700°C. A flow of 100 mL min^-1 of air as the purge gas was used in order to burnout the oils during analysis to estimate their heat of combustion. From the extrapolated decomposition onset temperatures obtained from TG curves, it can be seen that corn oil presents the highest thermal stability (306°C), followed by the sunflower one (304°C). Olive oil presents the lowest one (288°C). The heat of combustion of each oil was estimated from DTA curves, showing the highest value for the olive oil. Except for corn oil, which presents a significantly different thermal decomposition behavior than the other oils, a perfect linear correlation is observed, with negative slope, between the heat of combustion of an oil and its respective extrapolated onset temperature of decomposition in air. This revised version was published online in August 2006 with corrections to the Cover Date.     

Thermal decomposition of cadmium succinate dihydrate

Thermal decomposition of cadmium succinate dihydrate, CdC₄H₄O₄·2H₂O, was studied in dynamic helium and air atmospheres by means of simultaneous TG, DTA and MS analysis. It was found that dehydration of CdC₄H₄O₄·2H₂O takes place in the temperature range 80–165°C and at low heating rates formation of monohydrate was stated. The anhydrous cadmium succinate decomposes at about 350°C to metallic cadmium. The gaseous products of cadmium succinate decomposition are CO₂ and H₂O. Formation of small amounts of 3-phenylpropanal and 1,7-octadiene during decomposition in helium was revealed. In helium cadmium evaporates at the temperature of decomposition and the residue consists of small amount of elementary carbon formed in result of pyrolysis of succinate groups. In air cadmium oxidizes and the final solid product of decomposition is CdO.     

Synthesis and Thermal Study of the Barium Complexes with 8-hydroxyquinolinate Derivatives

In this present work, barium ion was reacted with different ligands which are 5,7-dibromo 5,7-dichloro, 7-iodo and 5-chloro-7-iodo-8-hydroxyquinoline, in acetone/ammonium hydroxide medium under constant stirring and the obtained compounds were as follows: (I) Ba[(C₉ H₄ ONBr₂ )₂ ]⋅1.5H₂ O; (II) Ba[(C₉ H₄ ONCl₂ )(OH)]⋅1H₂ O; (III) Ba[(C₉ H₅ ONI)₂ ]⋅1H₂ O and (IV) Ba[(C₉ H₄ ONICl)₂ ]⋅5H₂ O, respectively. The compounds were characterized by elemental analysis, infrared absorption spectrum (IR), inductively coupled plasma spectrometry (ICP), simultaneous thermogravimetry-differential thermal analysis (TG-DTA) and differential scanning calorimeter (DSC). The final residue of the thermal decomposition was characterized as orthorhombic BaBr₂from (I); the intermediate residue, as a mixture of orthorhombic BaCO₃ and BaCl₂ and cubic BaO and the final residue, as a mixture of cubic and tetragonal BaO and orthorhombic BaCl₂ (II); the intermediate residue, as orthorhombic BaCO₃ and as a final residue, a mixture of cubic and tetragonal BaO from (III); and the intermediate residue, as a mixture of orthorhombic BaCO₃ and BaCl₂ and as a final residue, a mixture of cubic and tetragonal BaO and orthorhombic BaCl₂ from (IV). This revised version was published online in July 2006 with corrections to the Cover Date.     

Mechanism of thermal decomposition of thiourea derivatives

The thermal decomposition of a series of compounds has been studied by thermogravimetry, mass spectrometry, nuclear magnetic resonance and elemental analysis. The combined use of mass spectrometry and thermogravimetry (MS and TG) in the analysis of these compounds has allowed characterization of the fragmentation pattern which was the objective of this research. The gaseous products, volatile condensed products and solid residues were identified by NMR and MS. Based on the product of thermal decomposition, the mechanism of thermal decomposition has been derived.     

A study on the thermal decomposition of iron-cobalt mixed hydroxides

Thermal decomposition of pure Fe(OH)₃ and mixed with Co(OH)₂ were studied using TG, DTA, kinetics of isothermal decomposition and electrical conductivity measurements. The thermal products were characterized by X-ray diffraction and IR spectroscopy. The TG and DTA analysis revealed the presence of Co²⁺ retards the decomposition of ferric hydroxide and the formation of -Fe₂O₃. The kinetics of decomposition showed that the mixed samples need higher energy to achieve thermolysis. The investigation of thermal products of mixed samples indicated the formation of cobalt ferrite on addition ofx=1 or 1.5 cobalt hydroxide. The electrical conductivity accompanying the thermal decomposition decreases in presence of low ratio of Co²⁺ (x=0.2) via the consumption of holes created during thermal analysis. The continuous increase in values on increasing of Co²⁺ concentration corresponded to the electron hopping between Fe²⁺ and Co³⁺.

---

Zusammenfassung Mittels TG, DTA und der Kinetik von Messungen der isothermen Zersetzung und der elektrischen Leitfähigkeit wurde die Zersetzung von Fe(OH)₃ in reinem Zustand und vermengt mit Co(OH)₂ untersucht. Die thermischen Produkte wurden mittels Röntgendiffraktion und IR-Spektroskopie charakterisiert. TG und DTA zeigen, daß die Zersetzung von Eisen(III)-hydroxid und die Bildung von -Fe₂O₃ durch Gegenwart von Co²⁺ verzögert wird. Die Zersetzungskinetik zeigt, daß die Mischproben mehr Energie für die Thermolyse benötigen. Die Untersuchung der thermischen Produkte zeigt die Bildung von Cobaltferrit bei Zusatz vonx=1 oder 1,5 Cobalthydroxid. Die elektrische Leitfähigkeit nimmt bei der thermischen Zersetzung in Gegenwart von niedrigen Co²⁺-Konzentrationen (x=0.2) durch Verbrauch der bei der Thermoanalyse geschaffenen Löcher ab. Das monotone Ansteigen der -Werte bei steigender Co²⁺-Konzentration stimmt mit dem Überspringen von Elektronen zwischen Fe²⁺ und Co³⁺ überein.

     

Kinetics and mechanism of the thermal decomposition of barium titanyl oxalate

Thermal analysis of barium titanyl oxalate reveals that the decomposition proceeds through four distinct rate processes. Among them, the decomposition of oxalate occurs in the temperature range 230–350°C, and has been studied by TG and gas pressure measurements, supplemented by IR spectroscopy, electron microscopy and chemical analysis. Oxalate decomposition proceeds differently in vacuum and in flowing gas atmospheres. Analytical results indicate the formation of a complex carbonate together with CO, CO₂ and water vapour below 400°C. Schemes for each type of decomposition are proposed and discussed. For decomposition in vacuum, kinetic observations fitted the three-dimensional, diffusion controlled, rate equation for almost the entire α-range (0.028≤α≤0.92). The activation energy is calculated to be3 189±6 kJ mol⁻¹. In celebration of the 60^th birthday of Dr. Andrew K. Galwey     

Studies on Energetic (Non) Compounds. Part 21: Preparation and thermal decomposition of ring substituted dimethyl anilinium bromides

Six isomeric dimethyl anilinium bromides (DMABr) have been prepared and characterized by elemental and spectroscopic studies. Thermal decomposition of these salts has been studied by TG and simultaneous TG-DTA techniques. Kinetic parameters have been evaluated from isothermal TG data using contracting area and contracting cube equations. The decomposition pathways have also been suggested which involves simultaneous sublimation (at lower temperature) and dissociative vaporization/decomposition (at higher temperature). This revised version was published online in July 2006 with corrections to the Cover Date.     

Glass transition temperature and thermal decomposition of cellulose powder

Cellulose powder and cellulose pellets obtained by pressing the microcrystalline powder were studied using differential scanning calorimetry (DSC), differential thermal analysis (DTA), and thermal gravimetry (TG). The TG method enabled the assessment of water content in the investigated samples. The glass phase transition in cellulose was studied using the DSC method, both in heating and cooling runs, in a wide temperature range from −100 to 180 °C. It is shown that the DSC cooling runs are more suitable for the glass phase transition visualisation than the heating runs. The discrepancy between glass phase transition temperature T _g found using DSC and predictions by Kaelbe’s approach are observed for “dry” (7 and 5.3% water content) cellulose. This could be explained by strong interactions between cellulose chains appearing when the water concentration decreases. The T _g measurements vs. moisture content may be used for cellulose crystallinity index determination.     

Kinetics of thermal decomposition of manganese(ii) oxalate

The kinetics of manganese(II) oxalate thermal decomposition in the helium atmosphere was studied on the basis of isothermal measurements in the temperature range from 608 to 623 K. Manganese(II) oxide, MnO, was found to be the final product of reaction. The Avrami-Erofeev kinetic equation was used to describe all the experimental data in the range of decomposition degrees from 0.1 to 0.9. The determined activation energy equals 184.7 kJ mol^-1 with standard deviation ±5.2 kJ mol^-1. The estimated value of parameter n is 1.9 with standard deviation ±0.01 what suggests that the rate limiting step of MnC₂O₄ decomposition is the nucleation of new MnO phase and that the rate of nuclei growth is rising during decomposition. This revised version was published online in July 2006 with corrections to the Cover Date.     

Synthesis of calcium metaniobate by thermal decomposition of a coprecipitation product

The paper presents a new, nonconventional method, based upon coprecipitation, for the synthesis of niobium oxidic compounds. The coprecipitation product of niobic acid with calcium oxalate was used as precursor. Calcium metaniobate was obtained by appropriate thermal treatment of the coprecipitate. The coprecipitation mechanism was studied and the optimal conditions for quantitative precipitation of niobium and calcium were established. The mechanism of thermal decomposition of the coprecipitate was investigated by means of differential thermal analysis and X-ray powder diagrams. The final product of thermal decomposition, calcium metaniobate, is formed at 730°C.     

Study on the decomposition kinetics of FOX-7 and HNF

At TNO Prins Maurits Laboratory the characterisation and application of energetic materials is one of the main research topics. In this respect, the activities are focussed on using thermal analysis techniques such as TG/DTA and DSC. Standard DSC and TG/DTA techniques usually apply a linear temperature increase. During this gradual temperature change, the sample may pass certain phase changes related to different crystal structures, followed by a melting/decomposition of the material. In this way physicochemical properties like phase change temperatures, melting point, enthalpy of melting, decomposition temperature, etc. can be determined. By applying different heating rates, an analysis of the decomposition kinetics can be performed as well, which gives additional information on the decomposition process of the material. In this way the activation energy of the decomposition process and the 'shelf-life' of the material, when stored at a certain temperature, can be assessed. In a co-operation with the Technical University of Aachen, two relatively new and promising energetic materials were investigated: FOX-7 and HNF. FOX-7, or 1,1-diamino-2,2-dinitroethylene, is a less sensitive explosive, which could find application as a substitute of RDX (less sensitive but with preservation of performance). Hydrazinium nitroformate (HNF) is an oxidiser with potential use as a high-performance, chlorine-free ingredient in rocket propellants. The results of the TG/DTA and DSC tests, as well as the results of the analysis of the decomposition kinetics of these two materials, will be reported and discussed in this paper. This revised version was published online in July 2006 with corrections to the Cover Date.     

Kinetics of the thermal decomposition of bis(2,2-dinitropropyl)-N-fluoroamine

The kinetics of the thermal decomposition of bis(2,2-dinitropropyl)-N-fluoroamine are studied in the liquid phase. The reaction is autocatalytic in a melt. In dilute solution, the reaction rate is described by the first-order law. It is tens of times faster in polar sulfolan than in weakly polar dimethyl phthalate. A mechanism of the decomposition involving the formation of a cyclic transition state at the first, limiting stage of the process is suggested.Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 5, pp. 874–877, May, 1995.This work was financially supported by the Russian Foundation for Basic Research (Project No. 94-03-08103).     

Effect of nano cadmium sulfide on combustion and thermal decomposition of polystryene and poly(methyl methacrylate)

Cadmium sulfide nano particles, both hollow spheres (CdS‐HS) and rods (CdS‐NR), were synthesized by ultrasonic and solvothermal processes, respectively, and characterized by XRD and SEM. The effect of the two kinds of nano particles on flammability was investigated using the cone calorimeter and microscale combustion calorimeter. The incorporation of small amount of CdS nano particles (1 wt.%, 3 wt.%, 5 wt.%) leads to a reduction in the peak heat release rate (PHRR) compared to pristine PS; CdS‐NR is more efficient in reducing the PHRR. CdS nano particles are less effective in reducing the PHRR of PMMA. Thermal stability of PS/CdS and PMMA/CdS nanocomposites was studied by TGA. The TGA results show that the addition of the nano particles mainly increases thermal stability of PS and PMMA at high temperatures. Copyright © 2014 John Wiley & Sons, Ltd.     

Thermal Decomposition and Dehydration Kinetics of Tetra(piperidinium) Octamolybdate Tetrahydrate in Air

Thermal decomposition of tetra(piperidinium) octamolybdate tetrahydrate, [C₅H₁₀NH₂]₄[Mo₈O₂₆]·4H₂O, was investigated in air by means of TG‐DTG/DTA, DSC, TG‐IR and SEM. TG‐DTG/DTA curves showed that the decomposition proceeded through three well‐defined steps with DTA peaks closely corresponding to mass loss obtained. Kinetics analysis of its dehydration step was performed under non‐isothermal conditions. The dehydration activation energy was calculated through Friedman and Flynn‐Wall‐Ozawa (FWO) methods, and the best‐fit dehydration kinetic model function was estimated through the multiple linear regression method. The activation energy for the dehydration step of [C₅H₁₀NH₂]₄[Mo₈O₂₆]·4H₂O was 139.7 kJ/mol. The solid particles became smaller accompanied by the thermal decomposition of the title compound.     

Kinetic and thermodynamic parameters of the thermal decomposition of zinc(ii) dialkyldithiocarbamate complexes

The thermodynamic and kinetic parameters of the thermal decomposition of Zn(S₂CNR₂)₂ complexes (R=CH₃, C₂H₅ and n-C₃H₇) were determined with the dynamic thermogravimetric method. Superimposed TG/DTG/DSC curves show that thermal decomposition reactions for chelates with R=C₂H₅ and n-C₃H₇ occur in the liquid phase, at temperatures far away from their melting points, whereas for the complex with R=CH₃ the thermal decomposition begins at a temperature closer to its melting point, suggesting a rather complex decomposition mechanism. This revised version was published online in August 2006 with corrections to the Cover Date.     

Characterization of fatty acid methyl esters by thermal analysis

The thermal stability of selected straight-chain (C₆-C₁₄) esters of fatty acids has been studied by TG-DTG and DTA analysis. In DTG, a peak is detected between 84° and 125° C followed by a main effect in the range 105°–215°C, whereas in DTA only an exothermic peak appears in the range of 126.5° to 187°C (onset temperatures). The temperatures of these effects have been related with ignition points, molecular weights and boiling points. The characteristics of melting and recrystallization of the above fatty acid methyl esters and those with carbon numbers between C₁₄ and C₂₄ have been established by DSC along the melting range between ?83° and 50°C. Polymorphism appears in caproic, heptanoic, palmitic and stearic acid methyl esters.