Scanning electrochemical microscopy for direct imaging of reaction rates

Not only in electrochemistry but also in biology and in membrane transport, localized processes at solid-liquid or liquid-liquid interfaces play an important role at defect sites, pores, or individual cells, but are difficult to characterize by integral investigation. Scanning electrochemical microscopy is suitable for such investigations. After two decades of development, this method is based on a solid theoretical foundation and a large number of demonstrated applications. It offers the possibility of directly imaging heterogeneous reaction rates and locally modifying substrates by electrochemically generated reagents. The applications range from classical electrochemical problems, such as the investigation of localized corrosion and electrocatalytic reactions in fuel cells, sensor surfaces, biochips, and microstructured analysis systems, to mass transport through synthetic membranes, skin and tissue, as well as intercellular communication processes. Moreover, processes can be studied that occur at liquid surfaces and liquid-liquid interfaces.     

Scanning electrochemical microscopy for biosurface imaging

Scanning electrochemical microscopy (SECM) is a powerful technique that can provide chemical identity, quantification, and spatiotemporal information on biosurfaces. The ability of SECM for noninvasive and high-resolution electrochemical imaging has made it valuable for the study of cell phenotypes and functions. This review focuses on the latest advances of SECM technique for the biosurface imaging. The SECM measurements of different biomarkers, including oxygen consumption rate and enzyme activity of cell aggregates, redox state of cardiomyocytes, and bacterial metabolic activity, are introduced. The applicability of SECM on membrane permeability measurements, neurotransmitter measurements, and intracellular measurements is discussed.     

Scanning electrochemical microscopy: a new way of making electrochemical experiments

A short review is given on scanning electrochemical microscopy (SECM). The historic background of the technique is briefly summarized and the basic principles outlined. The three different directions of its use: chemical microscopic imaging, the measuring of physicochemical constants and coefficients, and use as a micromachining tool are briefly discussed. The general built-up of the SECM apparatus is described. Preparation and use of several different measuring tips are introduced. A few examples are given of the application of SECM measurement in different studies.     

Scanning electrochemical microscopy: a new way of making electrochemical experiments

A short review is given on scanning electrochemical microscopy (SECM). The historic background of the technique is briefly summarized and the basic principles outlined. The three different directions of its use: chemical microscopic imaging, the measuring of physicochemical constants and coefficients, and use as a micromachining tool are briefly discussed. The general built-up of the SECM apparatus is described. Preparation and use of several different measuring tips are introduced. A few examples are given of the application of SECM measurement in different studies.     

Scanning electrochemical microscopy in the 21st century

The fundamentals of and recent advances in scanning electrochemical microscopy (SECM) are described. The focus is on applications of this method to studies of systems and processes of active current interest ranging from nanoelectrochemistry to electron transfer reactions and electrocatalysis to biological imaging.     

Scanning photocurrent microscopy of lateral organic bulk heterojunctions

Scanning confocal photocurrent microscopy has been used to characterize carrier collection efficiency in lateral bulk heterojunction devices. By analyzing the photocurrent mappings within these devices, the lateral extents of the space charge regions has been measured and reported. Modulation via white light bias or increased voltage bias is also shown to increase the size of the space charge regions.     

Scanning electrochemical microscopy of enzymes immobilized on structured glass-gold substrates

Scanning electrochemical microscopy (SECM) was used to characterize enzyme-modified glass-gold specimens. The exposed gold surface was functionalized with an aminothiol and reacted with carbodiimide-activated glucose oxidase. The specimen surface was examined with SECM, using a 25 μm platinum electrode. Images were acquired showing the topography, electric conductivity, and enzymatic activity of the composite surface. It was found that the hydroxy-groups of the glass surface are as likely to bind to the activated enzyme as the amino-groups on the gold surface.     

Scanning electrochemical microscopy for the direct patterning of a gold surface with organic moities derived from iodonium salt

The scanning electrochemical microscope (SECM) is used in the direct mode to draw patterns of a thin passivating organic layer on a gold electrode surface and to image them. The patterning is ensured by the local electrografting of the organic moieties obtained by reduction of an aryliodonium salt, as evidenced by XPS and SECM line scans. The resolution of the writing process is controlled by the charge injected.     

Scanning electrochemical microscopy imaging of rhodochrosite dissolution using gold amalgam microelectrodes

Gold/mercury amalgam (Au/Hg) microelectrodes with a diameter of 25 microm were developed for the detection of environmentally relevant analytes such as manganese and iron by scanning electrochemical microscopy (SECM), and applied to investigate the controlled dissolution of manganese carbonate (MnCO(3); rhodochrosite) in acidic conditions. Characterization of the amalgam electrode geometry via approach curves recorded during SECM experiments revealed Au/Hg microelectrodes with sphere cap geometry. Quantitative determination of Mn(2+) has been achieved by calibration of the Au/Hg microelectrode in bulk solution experiments. Subsequent SECM imaging experiments confirm the applicability of amalgam microelectrodes for imaging of Mn(2+) production during dissolution of MnCO(3) at pH 3.9. This study confirms feasibility and provides the fundamental basis of SECM imaging with amalgam microelectrodes to address biogeochemically relevant questions.     

Scanning electrochemical microscopy study of laccase within a sol-gel processed silicate film

The enzyme p-diphenol:dioxygen oxidoreductase (laccase, EC 1.10.3.2) was isolated from Cerrena unicolor fungus and embedded in a sol-gel film obtained by acidic condensation of TMOS. The gel was cast to thin films on glass. The laccase-containing silicate films were inspected by confocal laser scanning microscopy (CLSM), scanning force microscopy (SFM) and scanning electrochemical microscopy (SECM). CLSM images in the reflection mode showed aggregates within the silicate films. SECM images in the substrate-generation/tip-collection mode using 2,2'-azino-bis(3-ethylbenzothiazoline-6-sulfonate) (ABTS) as electron donor for laccase showed that the position of aggregates coincides with increased enzymatic activity within the silicate film. The flux from individual aggregates was detected. SECM images in the redox competition mode confirmed the assignment and could exclude that topographic features observed by CLSM and SFM could be the reason for the image contrast. SFM images showed that the aggregates partially dissolve during prolonged exposure to aqueous buffer. The experimental setup allowed following one individual aggregate over time with all three microscopic techniques which enabled the collection of complementing information on morphology and catalytic activity as well as their development over time.     

Scanning electrochemical microscopy and video microscopy investigations of Tiron-mediated polypyrrole nucleation on AA2024-T3

Scanning electrochemical microscopy (SECM) and video microscopy have been used to examine the mediated electrodeposition of polypyrrole on AA2024-T3. Of particular interest is the role of surface heterogeneity (namely, copper-rich secondary phase particles) on electrodeposition mediated by 4,5-dihydroxy-1,3-benzenedisulfonic acid (Tiron). SECM shows that polymer nucleation occurs exclusively on the aluminum matrix of the alloy. Video microscopy shows this to be true on a model alloy (a pure Al substrate with an embedded Cu wire) as well, and also suggests that polymer growth is directional toward the copper-rich sites in the absence of sulfate in the deposition solution. A model is presented in which polymer deposition on the copper-rich sites is inhibited either by CuSO₄-induced passivation or by the loss of mediator due to Cu–Tiron complex formation.     

Scanning electrochemical cell microscopy: A natural technique for single entity electrochemistry

Scanning electrochemical cell microscopy (SECCM) is a robust and versatile scanning electrochemical probe microscopy technique that allows direct correlation of structure–activity at the nanoscale. SECCM uses a mobile droplet cell to investigate and visualize electrochemical activity at interfaces with high spatiotemporal resolution, while also providing topographical information. This article highlights diverse contemporary challenges in the field of single entity electrochemistry tackled by the increasing uptake of SECCM globally. Various applications of SECCM in single entity electrochemistry are featured herein, including electrocatalysis, electrodeposition, corrosion science and materials science, with electrode materials spanning particles, polymers, two-dimensional materials and complex polycrystalline substrates. The use of SECCM for patterning structures is also highlighted.     

Scanning electrochemical microscopy: Visualization of local electrocatalytic activity of transition metals hexacyanoferrates

The redox competition mode of scanning electrochemical microscopy (SECM) was used to visualize differences in local electrocatalytic activity of Fe and Ni hexacyanoferrates (HCFs) in hydrogen peroxide reduction. The uniform round-shaped spots of electrocatalysts for the SECM measurements were electrochemically deposited using a scanning droplet cell. A negligible activity of NiHCF towards H₂O₂ reduction compared to Prussian Blue (PB) was observed. The dependence of local Prussian Blue activity on the applied potential was investigated. The proposed strategy explores the potential application of SECM as a rapid screening tool for HCF film activity within a single experiment.     

Scanning electrochemical microscopy imaging of DNA microarrays using methylene blue as a redox-active intercalator

Scanning electrochemical microscopy (SECM) has been employed in the imaging of DNA microarrays fabricated on gold substrates using methylene blue (MB) as a redox-active intercalator and ferrocyanide as the SECM mediator in solution. MB intercalated between base pairs of immobilized ds-DNA is electrochemically reduced via electron transfer from the underlying gold substrate, and the product is reoxidized in solution by SECM tip-generated ferricyanide. The resulting feedback current allows a heterogeneous electron-transfer rate constant for the MB-intercalated DNA to be deduced. Moreover, DNA microarray spots can be imaged at a detection level of 14 fmol/spot for ds-DNA consisting of 15 base pairs. Microarrays prepared using 20 microM DNA solutions are easily visualized, and the feasibility of detecting base pair mismatches is also demonstrated.     

A comparison of electron-transfer rates of ferrocenoyl-linked DNA

Electron transfer (ET) through two configurations of double-stranded (ds)-DNA was investigated by the attachment of a ferrocenoyl (Fc)-labeled and thiol-labeled DNA to Au electrodes. The first configuration positions the Fc moiety on the same strand as the thiolate, whereas the second configuration positions the Fc group on the complementary strand. The subtle difference in structure leads to a difference in E0' values (29 mV) and in ET rate constants (25 vs 115 s-1). The results have led to a further understanding of electron transfer in ds-DNA, and several models of ET are proposed.     

Scanning electrochemical microscopy as a probe of Ag+ binding kinetics at Langmuir phospholipid monolayers

A new method has been developed for measuring local adsorption rates of metal ions at interfaces based on scanning electrochemical microscopy (SECM). The technique is illustrated with the example of Ag+ binding at Langmuir phospholipid monolayers formed at the water/air interface. Specifically, an inverted 25 microm diameter silver disc ultramicroelectrode (UME) was positioned in the subphase of a Langmuir trough, close to a dipalmitoyl phosphatidic acid (DPPA) monolayer, and used to generate Ag+ via Ag electro-oxidation. The method involved measuring the transient current-time response at the UME when the electrode was switched to a potential to electrogenerate Ag+. Since the Ag+/Ag couple is reversible, the response is highly sensitive to local mass transfer of Ag+ away from the electrode, which, in turn, is governed by the interaction of Ag+ with the monolayer. The methodology has been used to determine the influence of surface pressure on the adsorption of Ag+ ions at a phospholipid (dipalmitoyl phosphatidic acid) Langmuir monolayer. It is shown that the capacity for metal ion adsorption at the monolayer increased as the density of surface adsorption sites increased (by increasing the surface pressure). A model for mass transport and adsorption in this geometry has been developed to explain and characterise the adsorption process.     

Scanning electrochemical microscopy studies of glutathione-modified surfaces. An erasable and sensitive-to-reactive oxygen species surface

A surface sensitive to reactive oxygen species (ROS) was prepared by reduction of a diazonium salt on glassy carbon electrode followed by the chemical coupling of glutathione (GSH) playing the role of an antioxidant species. The presence of active GSH was characterized through spectroscopic studies and electrochemical analysis after labeling of the -SH group with ferrocene moieties. The specific reactivity of GSH vs ROS was evaluated with scanning electrochemical microscopy (SECM) using the reduction of O(2) to superoxide, O(2)(?-), near the GSH-modified surface. Approach curves show a considerable decrease of the blocking properties of the layer due to reaction of the immobilized GSH with O(2)(?-) and the passage of GSH to the glutathione disulfide (GSSG). The initial surface could be regenerated several times with no significant variations of its antioxidant capacity by simply using the biological system glutathione reductase (GR)/NADPH that reduces GSSG back to GSH. SECM imaging shows also the possibility of writing local and erasable micropatterns on the GSH surface by production of O(2)(?-) at the tip probe electrode.     

Ab initio based calculations of electron-transfer rates in metalloproteins

A long-standing challenge in electron-transfer theory is to compute accurate rates of long-distance reactions in proteins. We describe an ab initio Hartree-Fock approach to compute electronic-coupling interactions and electron-transfer rates in proteins that allows the favorable comparison with experiment. The method includes the following key features; each is essential for reliable rate computations: (1) summing contributions over multiple tunneling pathways, (2) averaging couplings over thermally accessible protein conformations, (3) describing donor and acceptor electronic structure explicitly, including solvation effects, and averaging coupling over multiple energy-level crossings of the nearly degenerate donor-acceptor ligand-field states, and (4) eliminating basis set artifacts associated with diffuse basis functions. The strong dependence of coupling on donor-acceptor distance and on pathway interferences causes large variations of the computed electron-coupling values with protein geometry, and the strongest coupled conformers dominate the electron-transfer rate. As such, averaging over thermally accessible conformers of the protein and of the redox cofactors is essential. This approach was tested on six ruthenium-modified azurin derivatives using the high temperature nonadiabatic rate expression and compared with simpler pathways, average barrier, and semiempirical INDO models. Results of ab initio Hartree-Fock calculations with a split-valence basis set are in good agreement with the experimental rates. Predicted rates in the longer-distance derivatives are underestimated by 3-8-fold. This analysis indicates that the key ingredients needed for quantitatively reliable protein electron-transfer rate calculations are accessible.     

Scanning electrochemical microscopy in the 21st century. Update 1: Five years after

This Perspective is an update to our more extensive survey of scanning electrochemical microscopy (SECM) published in 2007. During this time, the SECM field retained its momentum by expanding into new areas and meeting the emerging scientific and technological challenges. Here we focus on most prominent developments such as high-resolution imaging, investigation of structures and processes on the nanoscale, alternative energy applications, and new approaches to solving "real world" problems. The fabrication of novel SECM probes and related theoretical advances are also discussed.