Design and application of a liquid-flow adsorption micro calorimeter based on the Calvet-type DAK 1-1 microcalorimeter (USSR)

The construction and the properties of a liquid-flow adsorption microcalorimeter are described. The calorimeter is based on the commercially available Calvet-type DAK 1-1 microcalorimeter (USSR), which has been equipped with a flow system consisting of a pump, several sets of heat exchangers and an adsorption cell. The minimum detectable heat effect is 1W up to a flow rate of 30 cm³/h.Results on the application of the calorimeter to adsorption and desorption processes of nonionic (Triton X-100) and anionic (styrene phosphonic acid) surfactant solutions in water at an-Al₂O₃ surface are presented and discussed.

---

Zusammenfassung Konstruktion und Eigenschaften eines Flüssigkeits-Strömungs-Adsorptions-Mikrokalorimeters werden beschrieben. Das Kalorimeter wurde weiterentwickelt aus dem Calvet-Mikrokalorimeter DAK 1-1 (USSR), das mit einem Strömungssystem aus einer Pumpe, verschiedenen Wärmeaustauschern und einer Adsorptionszelle ausgestattet wurde. Der kleinste nachweisbare Wärmeeffekt liegt bei 1W bis zu einer Durchflussgeschwindigkeit von 30 cm³ h^–1. Mit dem Kalorimeter erhaltene Messergebnisse zur Adsorption und Desorption wässeriger Lösungen von nichtionischen (Triton X-100) und anionischen (Styrenphosphonsäuren) Tensiden an-Al₂O₃ werden dargestellt und diskutiert.

---

, 1-1 (), , , . 1 30 ³/. ( X–100) (- ) -l₂₃.

     

Thermogravimetric and kinetic study of a clodronic acid complex formed with sodium

Thermal stability of the clodronic acid complex formed with sodium (Na₂CCl₂(HPO₃)₂ ·4H₂O) was studied using both dynamic and isothermal thermogravimetric analyses as well as mass spectra. The thermal decomposition has two stages: dehydration and loss of two molecules of hydrogen chloride. Using the isothermal TG data the first step was found to be a phase-boundary reaction while the second step obviously cannot be described with just one reaction mechanism. The final residue of the dynamic TG analyses above 810 K was found to be sodium metaphosphate.

---

Zusammenfassung Sowohl mittels dynamischer und thermogravimetrischer Untersuchungen als auch and Hand von Massenspektren wurde die thermische Stabilität des mit Natrium gebildeten Säurekomplexes Na₂CCl₂(HPO₃)₂·4H₂O untersucht. Die thermische Zersetzung vollzieht sich in zwei Schritten: Dehydratation und Verlust von zwei Molekülen HCl. Auf Grund der isothermen TG Angaben ist der erste Schritt eine Phasengrenzreaktion, während der zweite Schritt mit einem einzigen Reaktionsmechanismus nicht eindeutig beschrieben werden kann. Das Endprodukt der DTG Analyse oberhalb 810 K erwies sich als Natriummethaphosphat.

---

-Na₂CCl₂/HPO_3/2·4H₂O — , - . , , , . , , . 810 .

     

Reactivity of alkyl and polychloroalkyl radicals toward 1-hexene

The kinetics of CCl₃ radical addition to 1-hexene in CCl₃Br and CCl₄ media has been studied. The rate constant of CCl₃ addition to the double bond is shown to be independent of the solvent. The ratios between the rate constants of transfer and allyl chain termination for the alkyl and polychloroalkyl radicals have been estimated by competition methods. Activation parameters for the calculated rate constants are given.

---

CCl₃- 1- CCCl₃Br CCl₄. , . . .

     

Susceptibility of Ni?P?O?Te catalyst to modification by products of ethylbenzene oxidehydrogenation

Washing conditions of phosphate slurry from which Ni–P–O–Te catalyst had been obtained had practically no effect on the initial H _surf. ⁺ concentration but affected substantially the degree of acidification of the catalyst surface during the first stage of ethylbenzene oxidehydrogenation, and thereby the catalyst activity.

---

, Ni–P–O–Te, H _. ⁺ , .

     

Heat capacities of diphenyl,p-terphenyl andp-quaterphenyl from 180 K to their melting points

The heat capacities of diphenyl,p-terphenyl andp-quaterphenyl from 180 K to their melting points were measured with a Perkin-Elmer DSC 1B scanning calorimeter. Anomalies were observed in the heat capacity curves forp-terphenyl (from 400 K to the melting point) andp-quaterphenyl (from 190 to 260 K, and from 450 to 540 K). It is assumed that the anomalies near the melting points of the compounds under consideration could be related both to modification of the motion of the phenyl rings (external or/and internal) and to change in the motion of the molecules as a whole (diffusion phase).

---

Zusammenfassung Die Wärmekapazitäten von Diphenyl,p-Terphenyl undp-Quaterphenyl wurden im Bereich von 180 K bis zum Schmelzpunkt der Verbindungen mit einem Perkin-Elmer DSC 1B Scanning-Kalorimeter gemessen. Anomalien der Wärmekapazitätskurven wurden beip-Terphenyl (von 400 K bis zum Schmelzpunkt) und beip-Quaterphenyl (von 190–260 K und von 450–540 K) beobachtet. Es wird angenommen, daß die Anomalien nahe der Schmelzpunkte der betreffenden Verbindungen auf Veränderungen der Bewegung der Phenylringe (äußere und/oder innere) und der Moleküle an sich (Diffusionsphase) zurückzuführen sind.

---

- 1 , - - 180 . - 400 , - — 190 260 450 540 ., ( ), ( ).

     

Studies on the V2O5?TiO2 system, V. Equilibrium pressures

The oxygen equilibrium pressures from pure V₂O₅ and co-precipitated V₂O₅–TiO₂ system were measured in the range of 200–450 °C. The behavior of the equilibrium pressure with changes of temperature of the samples with and without TiO₂ is attributed to Ti⁴⁺ interaction with the V₂O₅ lattice.

---

V₂O₅ - V₂O₅–TiO₂ 200–450°C. TiO₂ Ti⁺⁴ V₂O₅.

     

Thermoanalytical studies on the preparation of industrial crystalline aluminium sulphate

Changes in the water content of aluminium sulphate hydrate were investigated gravimetrically at room temperature in air with different relative humidities. The samples conditioned in this way were characterized by thermoanalytical (TG, DTG, DSC) and X-ray diffraction measurements. Industrial aluminium sulphate hydrate obtained by freezing the melt has a partly crystalline structure. After grinding, this material crystallizes during storage. This process requires a humid atmosphere; increasing relative humidity brings about more intensive crystallization.It was found that the crystallization of aluminium sulphate from the melt is facilitated by a higher water content of the melt.

---

Zusammenfassung VerÄnderungen des Wassergehalts von Aluminiumsulfat-Hydrat bei Zimmertemperatur in Luft unterschiedlicher relativer Feuchtigkeit wurden gravimetrisch untersucht. Die auf diese Weise konditionierten Proben wurden durch thermoanalytische (TG, DTG, DSC) und röntgendiffraktometrische Messungen charakterisiert. Durch Erstarren der Schmelze erhaltenes industrielles Aluminiumsulfat-Hydrat ist teilweise kristallin. Nach dem Mahlen kristallisiert dieses Material wÄhrend der Lagerung. Dieser Proze\ erfordert eine feuchte AtmosphÄre, wobei sich der Kristallisationsgrad mit steigender relativer Feuchtigkeit erhöht. Es wurde festgestellt, da\ die Kristallisation des Aluminiumsulfats durch einen höheren Wassergehalt der Schmelze gefördert wird.

---

. , , . , , . . , . , .

     

Studies on catalytically active surface compounds, IX. Formation of O2? radicals on VCl4/SiO2 catalysts

The conditions for the formation of O ₂ ^– on VCl₄/SiO₂ catalysts have been investigated. It is shown that thermal vacuum treatment (TVT) of unhydrolyzed catalysts leads to partial hydrolysis of the surface vanadium complex caused by the silanol groups of the support. The ability of the catalysts to generate O ₂ ^– radicals was found to depend on the degree of hydrolysis caused by thermal vacuum treatment.

---

O ₂ ^– VCl₄/SiO₂. , , . , O ₂ ^– , .

     

Kinetics of propylene oxidation in the region of negative temperature coefficients of the rate

Kinetic regularities in the consumption of initial reactants and the accumulation of propylene oxidation products has been studied in the region of negative temperature coefficients of the maximum reaction rate (T=648–723 K). It has been revealed that for prolynene-enriched mixtures (C₃H₆:O₂=3:1) at P-20.66 kPa, the reaction rate is practically independent of the temperature, whereas for poor mixtures (C₃H₆:O₂=1:5) it decreases with increasing temperature.

---

a (T=648–723K). , (C₃H₆:O₂=3:1) P=20,66 , (C₃H₆:O₂=1:5) .

     

X-ray diffraction studies of the state of components in Pt?Ce/Al2O3 catalysts

X-ray diffraction studies of supported Ce/Al₂O₃ and Pt–Ce/Al₂O₃ catalysts have shown that besides a bulk phase CeO₂ a product of the interaction with the support cerium aluminate having a perovskite structure, is usually formed. Platinum in unreduced modified samples forms an oxide and is statistically distributed in the perovskite phase of cerium aluminate. After reduction, only half of the metal is in the metallic state with a particle size of 10 Å.

---

, CeO₂, - . . 10 Å.