水热条件下坡缕石在NaOH溶液中的行为及结构变化

分别用1,2和3 mol·L^-1的NaOH溶液,在不同的温度条件下对坡缕石进行了侵蚀实验。对反应后的固相产物进行了XRD和SEM分析,对浸出液中的金属阳离子进行了原子吸收光谱分析。讨论了反应温度和碱溶液浓度对碱溶后产物的影响。XRD和SEM结果表明,c_NaOH≤2 mol·L^-1时,坡缕石经碱溶液侵蚀后,可以生成蒙脱石和方沸石,其中反应温度的升高有利于方沸石的形成,碱溶液浓度的升高有利于蒙脱石的形成。当碱溶液浓度达到3 mol·L^-1,反应温度为200 ℃时,最终产物为SiO₂。浸出液的定量分析结果显示,坡缕石与碱溶液的反应过程中,Na⁺对八面体阳离子的置换具有选择性,置换顺序为：Al³⁺＞Fe³⁺(Fe²⁺)＞Mg²⁺。     

溶胶凝胶模板法制备SiO2∶Sm3+纳米阵列材料

采用溶胶凝胶模板法制备了不同Sm³⁺掺量的SiO₂∶Sm³⁺纳米阵列材料,通过SEM、EDS、FTIR等对材料的形貌和结构进行测试表征。FTIR分析表明Sm³⁺进入SiO₂网络结构形成了Si-O-Sm键。SEM、EDS分析显示Sm³⁺掺量的增大促使阵列由纳米管向纳米线的转变。此外,腐蚀清洗等后处理工艺对保持纳米阵列的形貌至关重要。最后,讨论了溶胶凝胶模板法制备SiO₂∶Sm³⁺纳米阵列的机理。     

芳基四硫富瓦烯与碘电荷转移复合物的合成及其晶体结构

采用缓慢挥发溶剂的方法合成了硫原子桥联芳基取代四硫富瓦烯（Ar-S-TTF）与碘的3种电荷转移复合物（1^+·）（I₃）·I₂、（2^+·）（I₅）·I₂和（3²⁺）（I₃）₂,采用单晶X射线衍射、紫外可见光谱、循环伏安对其进行了表征。复合物（1^+·）（I₃）·I₂为C2/c空间群,1^+·呈椅式构型。化合物1与碘之间在溶液中和复合物中电荷转移一致。复合物（2^+·）（I₅）·I₂为P1空间群,2^+·呈椅式构型。复合物（3²⁺）（I₃）₂为Pbca空间群,3²⁺呈独特的平面构型。化合物2和3与碘之间在溶液中和复合物中呈现不同的电荷转移。复合物中聚碘阴离子呈现不同的堆积结构：由I₃^-或I₅^-/I₂组成的一维链状和I₃^-/I₂组成的二维网格状。     

八羧基铜酞菁修饰海藻酸钠阳膜层制备CuPc(COOH)8-SA/mCS双极膜及其表征

在海藻酸钠(SA)中添加八羧基铜酞菁(CuPc(COOH)₈),并分别用Fe³⁺离子和戊二醛作为交联剂对海藻酸钠-八羧基铜酞菁阳膜层和壳聚糖(CS)阴膜层进行改性,制备了八羧基铜酞菁-海藻酸钠/改性壳聚糖双极膜(CuPc(COOH)₈-SA/mCS BPM)。在海藻酸钠中添加八羧基铜酞菁以促进中间层中水的解离。用FTIR、SEM等对制备的CuPc(COOH)₈-SA/mCS双极膜进行了表征。作为比对,制备了Fe³⁺离子改性的Fe-SA/mCS双极膜和二茂铁(Fc)离子改性的Fc-SA/mCS双极膜。实验结果表明,CuPc(COOH)₈-SA阳离子交换膜的离子交换容量、H⁺离子透过率均获得提高。与Fe³⁺离子改性或二茂铁离子改性的mSA/mCS双极膜相比,CuPc(COOH)₈-SA/mCS双极膜的阻抗、电阻压降(IR降)和溶胀度降低,在H+离子浓度低于8 mol·L^-1的酸溶液中具有稳定的工作性能。     

螯合树脂研究 Ⅻ.以聚硫醚为主链的异丙巯基胺树脂的合成及其吸附性能

 由聚环硫氟丙烷与多乙烯多胺反应制得的聚合物(PB)再与环硫丙烷反应,合成了四种以聚硫醚为主链的异丙巯基胺树脂(PBM_1-4)。树脂对Au³⁺、Pd²⁺、Pt⁴⁺、Ag⁺和Hg²⁺等离子具有强的吸附能力,对Cu²⁺次之,对Zn²⁺和Pb²⁺很弱。树脂对贵金属具有高的选择性,能从含Au³⁺、Cr³⁺、Co²⁺、Ni²⁺、Cu²⁺、Mn²⁺、Zn²⁺和Fe³⁺的溶液中定量吸附Au³⁺而不吸附其它离子。     

阳离子(从有机铵到无机阳离子)对fac-[Fe(CO)3I3]-阴离子的稳定性和毒性的调节

通过无机碘盐(MI_n)与 cis-[Fe(CO)₄I₂]反应制备了 5 个盐类化合物 fac-M[Fe(CO)₃I₃]_n (Mⁿ⁺=Na⁺ (1),K⁺ (2),Mg²⁺ (3),Ca²⁺ (4),NH₄⁺ (5)),探讨了阳离子Mⁿ⁺对fac-[Fe(CO)₃I₃]^-阴离子的稳定性和细胞毒性的影响。通过傅里叶变换红外光谱(FTIR)监测,发现盐 1~5在 DMSO、D₂O、生理盐水等介质中均能缓释 CO,其释放动力学符合一级反应动力学模型;还发现溶液中碘离子的浓度和酸度对该阴离子的缓释CO性能也具有调节作用。通过噻唑蓝(MTT)实验评估了盐1~5对膀胱癌细胞的毒性,其24 h半抑制浓度(IC₅₀)在 25~43 μmol·L^-1。与有机铵阳离子类的盐化合物相比,盐1~5在含水介质中的释放 CO速率下降,毒性亦有下调。研究还发现这类fac-[Fe(CO)₃I₃]^-阴离子在缓释CO的同时释放碘自由基,并能导致线粒体活性氧(ROS)水平、Parkin蛋白表达均上调。铁死亡抑制剂(Ferrostatin-1和Liproxstatin-1)试验结果表明这类化合物可能引发铁死亡通路并促进肿瘤细胞死亡。     

Ca2+-Mg2+-Zn2+体系在水溶性聚磷酸铵溶液中螯合规律的研究

近年来,水溶性聚磷酸铵在液体肥料和复合肥料的领域受到了广泛的关注,并在发达国家中得到了大面积的推广及应用。在pH值为5.5~8.0、温度为278.15 K~323.15 K的条件下,本文采用滴定法研究Ca_²⁺-Mg_²⁺-Zn_²⁺体系在聚磷酸铵溶液中的螯合规律。实验结果表明：相同质量分数的聚磷酸铵溶液对金属离子的螯合量会随着体系中Ca_²⁺、Mg_²⁺、Zn_²⁺的摩尔浓度的变化而变化;随着温度的升高而逐渐降低;随着pH的增加而逐渐增加;随着聚合度的升高而逐渐增加。采用傅里叶红外光谱对聚磷酸铵和A₁B₃C₃体系的螯合物进行表征。     

CuY制备方法对其催化甲醇氧化羰基化活性中心的影响

以Cu(NO₃)₂为铜源,以NaY和HY分子筛为载体,通过溶液离子交换法和等体积浸渍法制备了不同的无氯CuY催化剂,并进行了气相甲醇氧化羰基化催化活性研究。通过浸渍法制备的催化剂Cu含量为10%,而以NaY和铜氨溶液离子交换制备的催化剂Cu含量只有6.3%,但其催化活性和选择性均较好。通过催化剂的Cu元素分析、低温氮吸附-脱附、XRD、H₂-TPR、XPS和TPD等表征表明,溶液离子交换法制备的催化剂,Cu物种以离子的形式高度分散于分子筛骨架结构中,较好地保持了分子筛晶体结构,并对甲醇有较强的吸附能力,催化活性较高,而将等体积浸渍Cu(NO₃)₂溶液后的HY或NaY分子筛,在400 ℃焙烧过程中,发生了固体离子交换反应,形成了连接于分子筛骨架的Cu²⁺,但以HY为载体更容易进行固体离子交换,未交换的铜物种以CuO的形式分散到分子筛表面。在600 ℃高温活化中,催化剂中Cu²⁺可部分还原为活性物质Cu⁺,但以NaY和铜氨溶液离子交换制备的催化剂Cu²⁺自还原能力最大。     

两个3d-4f杂核配合物[Fe(phen)3]2[FeLn(H2O)(tiron)3]·6H2O的合成、晶体结构和磁性(Ln=HoⅢ, YbⅢ)

Ln₂O₃、硝酸铁、邻菲罗啉和钛铁试剂(tiron)通过水热法自组装合成了2个异质同晶的3d-4f杂核配合物[Fe(phen)₃]₂[FeLn(H₂O)(tiron)₃]·6H₂O, 其中, Ln=Ho^Ⅲ (1)和Yb^Ⅲ (2)。X-射线单晶衍射分析表明, 晶体属立方晶系, P2₁3空间群。3个tiron^4-配体利用酚氧桥联Ln³⁺和Fe³⁺形成具有C₃对称性的[FeLn(H₂O)(tiron)₃]^6-异双核配位单元, 其中七配位的Ln³⁺呈现一种畸变的单帽反三棱柱配位构型。配阳离子[Fe(phen)₃]³⁺通过phen-phen之间的π-π相互作用和与配阴离子间的静电引力等作用组装成三维的超分子。在2~300 K温度范围内测试了配合物的变温磁化率, 结果表明, Ln(Ⅲ)-Fe(Ⅲ)之间存在反铁磁性相互作用。     

SILAR法制备化学计量CuInS2薄膜

在室温下，以不同c_Cu/c_In的CuCl₂和InCl₃混合溶液作为阳离子前驱体，Na₂S水溶液为硫源，利用连续离子层吸附反应法(SILAR)在玻璃基底上制备了CuInS₂薄膜。XRD结果表明，当c_Cu²⁺/c_In³⁺在1～1.5范围内均可形成具有黄铜矿结构的CuInS₂薄膜。SEM观察到随c_Cu²⁺/c_In³⁺的升高，薄膜表面颗粒长大并出现团簇聚集。通过XPS测定薄膜表面的化学组成证明当c_Cu²⁺/c_In³⁺=1.25时，CuInS₂薄膜接近其标准的化学计量组成。此时薄膜的吸收系数大于>10⁴ cm^-1，禁带宽度E_g为1.45 eV。     

二氧化碳和丙烯直接合成甲基丙烯酸的NiPMo/TiO2催化剂的研究

用溶胶-凝胶法以磷钼酸(MPA)的镍盐溶液水解钛酸四丁酯制备了NiPMo/TiO2催化剂.使用ICP、 XRD、 TG-DTA、 IR、 TPD-MS和微反应技术研究了催化剂的化学组成、热稳定性、化学吸附性质和催化反应性能.杂多钼酸盐与TiO2通过O2-在TiO2表面发生了键合.在623 K下,杂多阴离子仍保持原有的Keggin结构.CO2在Lewis酸位Ni(Ⅱ)和Lewis碱位Ni-O-Mo的桥氧协同作用下生成CO2卧式吸附态Ni(Ⅱ)←O-(CO)←(O--Ni).丙烯有多种吸附态在催化剂上吸附.在563 K、 1 MPa和空速1500 h-1的反应条件下,丙烯的摩尔转化率为3.2%,产物MAA选择性为95%.     

Synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives

Different approaches for the synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives from simple amino acids have been investigated. A library of 33 precursors for the preparation of N-hydroxy pyrazinones was obtained in moderate to good yields.     

Toward new camptothecins. Part 6: Synthesis of crucial ketones and their use in Friedländer reaction

In the context of the preparation of camptothecin and luotonin A analogs, the synthesis of some key keto-precursors and their use in Friedländer condensation are described. This paper also focuses on the stability of these keto intermediates and emphasizes the major differences between indolizinones and pyrroloquinazolinones series. Noteworthy is also the report of some original structures isolated as by-products of some experiments.     

CoFe2O4自形成磁性液体场致结构化对磁化的影响

The Langevin paramagnetic theory can’t describe the relation between magnetization of ferrofluids and applied magnetic field. The structuralization of ferrofluids, which is considered the main influence factor of the magnetization, is regarded. The part of magnetization works is deposited when the structure is forming. This action influences the magnetization of ferrofluids directly or indirectly. On the base of the “compressing” model, the Langevin function that usually describes the magnetization of ferrofluid is modified, and a well-fitted curve is obtained. An equation of the relation between the equivalent volume fraction after being “compressed” and the intensity of magnetic field is discovered, which approximately describes the process of magnetization. The relation between the approximate initial susceptibility and the volume fraction can be obtained from modified formula.     

Highly regioselective Buchwald–Hartwig amination at C-2 of 2,4-dichloropyridine enabling a novel approach to 2,4-bisanilinopyridine (BAPyd) libraries

The highly regioselective Buchwald–Hartwig amination at C-2 of the cheap and readily accessible reagent, 2,4-dichloropyridine with a range of anilines and heterocyclic amines is described. This new methodology is robust and provides a facile access to 4-chloro-N-phenylpyridin-2-amines on 0.25 mol scale. These intermediates undergo a further Buchwald–Hartwig amination at higher temperature to enable rapid exploration of the chemical space at C-4 and to provide a library of 2,4-bisaminopyridines.     

KMnO4-mediated oxidative CN bond cleavage of tertiary amines: Synthesis of amides and sulfonamides

KMnO₄-mediated oxidative CN bond cleavage of tertiary amines producing secondary amine was introduced, which was trapped by electrophiles (acyl chloride and sulfonyl chloride) to form amides and sulfonamides. The reaction could take place at mild condition, tolerating a wide range of function groups and affording products in moderate to excellent yields.     

Chemistry of heterocyclic compounds at the A. E. Favorsky Irkutsk Institute of Chemistry, Siberian Branch of the Russian Academy of Sciences, over 50 years (Review)

The review contains a concise historical account and information on the most significant researches undertaken by the staff at the A. E. Favorsky Irkutsk Institute of Chemistry, Siberian Branch of the Russian Academy of Sciences on the Chemistry of Heterocyclic Compounds. Dedicated to Academician of the Russian Academy of Sciences B. A. Trofimov on his 70th jubilee. Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 10, pp. 1443–1502, October, 2008.     

A general and convenient synthesis of 4-(tosylmethyl)semicarbazones and their use in amidoalkylation of hydrogen,heteroatom, and carbon nucleophiles

A general synthesis of previously unknown semicarbazone-based α-amidoalkylating reagents, 4-(tosylmethyl)semicarbazones, has been developed. The synthesis involved three-component condensation of semicarbazones of aliphatic or aromatic aldehydes with the same or other aldehydes and p-toluenesulfinic acid. The scope and limitations of this reaction were investigated. The compounds obtained were demonstrated to be an efficient α-(4-semicarbazono)alkylating agents. They were reacted with H- (sodium borohydride), O- (sodium methylate), S- (sodium phenylthiolate), N- (pyrrolidine, sodium succinimide), P- (trialkyl phosphites), and C-nucleophiles (sodium diethyl malonate) to give the corresponding products of the tosyl group substitution, 4-substituted semicarbazones, including analogues of nitrofurazone. Among the prepared compounds tested in vitro for antibacterial and antifungal activity, three nitrofuryl-containing semicarbazones exhibited high biological activities with minimum inhibitory concentration (MIC) values of 8–32 μg/mL.     

Sulfur-directed metal-free and regiospecific methyl C(sp3)–H imidation of thioanisoles

Regiospecific and direct imidation of the methyl C(sp³)–H bond of thioanisoles is realized under mild and metal-free conditions with N-fluorobis(benzenesulfonyl)imide as an oxidant and nitrogen source. Proposed mechanism suggests that thionium ion intermediates and a Pummerer-type reaction are involved. The imidation has advantages such as high step-economy, excellent functionality tolerance, and regiospecificity, giving structurally diverse imidation products.     

Synthesis of novel chiral bidentate hydroxyalkyl-N-heterocyclic carbene ligands and their application in palladium-catalyzed Mizoroki–Heck couplings and asymmetric addition of diethylzinc to benzaldehyde

A small library of new chiral bidentate hydroxyalkyl-imidazolium salts 1 is conveniently synthesized on multi-gram scale from inexpensive and commercially available chiral pool amino acids. The corresponding carbenes, generated by deprotonation of imidazolium salts 1, in combination with palladium(II) chloride were tested in the Mizoroki–Heck coupling reaction. The most significant results in terms of yields and reactivities were achieved with low catalyst loading. The catalytic activities of these imidazolium salts were also investigated in the asymmetric addition of diethylzinc to benzaldehyde. The use of MgO nanoparticles as an additive in conjunction with these ligands played a crucial role in increasing the efficiency of these reactions.