Solvothermal synthesis and characterization of uniform CdS nanowires in high yield

Large-scale CdS nanowires with uniform diameter and high aspect ratios were synthesized using a simple solvothermal route that employed CdCl₂ and S powder as starting materials, ethylenediamine (en) as the solvent. X-ray diffraction (XRD) pattern and transmission electron microscopy (TEM) images show that the products are hexagonal structure CdS nanowires with diameter of 40 nm and length up to 10 μm. Selected area electron diffraction (SAED) and high resolution TEM (HRTEM) studies indicate the single-crystalline nature of CdS nanowires with an oriented growth along the c-axis direction. The optical properties of the products were characterized by optical absorption spectra and photoluminescence spectra. Based on the results of contrastive experiments, it is found that the sulfur source and the solvent play significant roles in the formation of uniform nanowires. A possible formation mechanism of nanowires is discussed.     

Large-scale synthesis of tungsten oxide nanowires with high aspect ratio

Through the controlled removal of surfactant from the presynthesized mesolamellar precursor (WO-L) at elevated temperature, tungsten oxide nanowires with diameters ranging from 10 to 50 nm and lengths up to several micrometers were obtained on a large scale. The structure, morphology, and composition of the nanowires were characterized by the XRD, TEM, HRTEM, EDX, and Raman spectra.     

Solution-phase synthesis of single-crystalline magnetic nanowires with high aspect ratio and uniformity

Single-crystalline Fe3O4 nanowires with uniform diameters and the largest aspect ratio (>500) were prepared by a one-step sol-gel process in the presence of ethylene glycol and poly(ethylene glycol)-block-poly(propylene glycol)-block-poly(ethylene glycol).     

Hydrothermal synthesis of hexagonal WO3 nanowires with high aspect ratio and their electrochemical properties for lithium-ion batteries

One dimensional WO₃ nanowires with high aspect ratio of >200 were synthesized by hydrothermal method. The effects of reaction temperature and time on phase and morphologies were studied and discussed. In this research, a suitable hydrothermal condition is at 200°C for 48 h. XRD, SEM, and TEM results show that the product is hexagonal WO₃ phase with diameter of 25 nm and several ten micrometers long with growth in the c direction. The electrochemical properties were tested for rechargeable lithium batteries. The WO₃ NWs electrode exhibits a stability trend over the 30 cycle testing. Some long-term activation process is attributed to the WO₃ NWs electrode during charge/discharge reaction.

     

Solvothermal synthesis of CdS nanowires in a mixed solvent of ethylenediamine and dodecanethiol

CdS nanowires with an average diameter of 25 nm and lengths of 20-40 mum have been solvothermally synthesized in a mixed solvent of ethylenediamine and dodecanethiol at 180 degrees C. The time-dependent examinations reveal that the formation process of CdS nanowires involves two sequential processes: a short-period solid-solid transformation process in the initial stage and a long-period Ostwald ripening process. The effect of both the volume ratios between the two components of the solvent and the reaction temperatures on the nanowire growth has also been investigated in detail. The results of the photoluminescence and UV-vis spectroscopy measurements reveal that the as-prepared CdS nanowires show a quantum confinement effect.     

Synthesis and dispersion of isolated high aspect ratio gold nanowires

We report the assembly properties of high density and high aspect ratio metal nanowire arrays (Au, Cu and Ag with diameters ranging from 40 to 250 nm) after release from the anodic alumina oxide (AAO) templates. Individual Ag and Cu nanowires were observed following release from the template, however, in the case of gold nanowires, the dispersion was dependent on size and aspect ratio. 40-100 nm gold wires aggregated to form bundles or disordered mats. We show that a simple cyanide-mediated release from the AAO template, results in isolated dispersion of wires even for the smallest wire diameters. Possible stabilising mechanisms for observed tendency of nanowires dispersion are discussed.     

Solvothermal synthesis and luminescence properties of CdS:Mn nanorods

CdS:Mn nanorods have been produced via a solvothermal approach in the nonaqueous solvent of ethylenediamine. An absolutely dominant single Mn²⁺ emission originating from the d-d (⁴T₁-⁶A₁) transition was obtained in CdS:Mn nanocrystals at room temperature. The effects of varying reaction temperature, molar ratio of S/Cd, and reaction time on the crystallinity and luminescence of CdS:Mn nanocrystals were systematically investigated. 1% Mn²⁺-doped CdS nanorods without any other additives were synthesized at 130°C for 10 h with an S/Cd molar ratio of 2:1. They show a rod-like shape, and their luminescence intensity around 593 nm is almost the strongest of all the nanorod samples investigated. CdS:Mn nanorods promise potential applications in nanoscale electronic and photonic devices.     

Synthesis of high aspect ratio quantum-size CdS nanorods and their surface-dependent photoluminescence

Colloidal CdS nanorods with diameters near 4 nm and narrow size distributions ( approximately +/-10%) were synthesized up to 300 nm long by a sequential reactant injection technique that utilizes phosophonic acids as capping ligands. The phosphonic acid strongly passivates the nonpolar CdS surfaces and sequential reactant injection provides controlled CdS formation kinetics to enable heterogeneous and facet-selective CdS deposition on the more reactive {002} surfaces. With this process, the nanorod length can be systematically increased by increasing reactant addition to extend nanorod growth. The phosphonic acid concentration, however, is quite important, as "low" concentrations allow radial deposition and branching to occur. These high aspect ratio (>100) CdS nanorods luminesce with relatively high efficiencies of 10.8% quantum yield at room temperature. The luminescence, however, mostly arises from trap-related recombination, and the emission is significantly red-shifted from the absorption edge. Various surface passivation treatments were explored to eliminate trap emission and increase the luminescence quantum yield. Thiol and amine passivation both significantly reduced trap emission and enhanced band-edge emission, but the total luminescence quantum yields dropped significantly, with a maximum measured value of 1.5% for the amine-passivated CdS nanorods.     

Two-step synthesis of high aspect ratio gold nanorods

We describe a very simple, two-step synthetic method to prepare gold nanorods with extremely high aspect ratios (> 20) and average lengths of more than 1000 nm. The method is based on a seed-mediated growth in presence of the surfactant cetyltrimethylammonium bromide. The length and aspect ratios of the nanorods can be manipulated by varying the surfactant concentration.     

Microwave-assisted synthesis of high aspect ratio ruthenium nanorods

<正>Poly(N-vinyl-2-pyrrolidone)(PVP)-stabilized ruthenium nanorods with high aspect ratio by refluxing ruthenium(Ⅲ) chloride in n-propanol have been successfully prepared by means of a facile and rapid microwave heating for the first time.The structure and morphology of the obtained products were characterized by transmission electron microscopy(TEM),select area electron diffraction(SAED),ultraviolet-visible spectrophotometry(UV-vis),X-ray photoelectron spectroscopy(XPS) and Fourier transform spectroscopy(FT-IR).XPS analysis reveals that the nanorods were in the metallic state.TEM images showed that ruthenium nanorods had an obvious one-dimensional structure with the aspect ratio ranged from 5 to 40 nm and length up to 600 nm.SAED patterns indicated that the nanorods were single-crystalline with a hexagonal structure.     

Synthesis of uniform CdS nanowires in high yield and its single nanowire electrical property

Large-scale high quality CdS nanowires with uniform diameter were synthesized by using a rapid and simple solvothermal route. Field emission scan electron microscopy (FESEM) and transmission electron microscopy (TEM) images show that the CdS nanowires have diameter of about 26 nm and length up to several micrometres. High resolution TEM (HRTEM) study indicates the single-crystalline nature of CdS nanowires with an oriented growth along the c-axis direction. The optical properties of the products were characterized by UV-vis absorption spectra, photoluminescence spectra and Raman spectra. The resistivity, electron concentration and electron mobility of single NW are calculated by fitting the symmetric I-V curves measured on single NW by the metal-semiconductor-metal model based on thermionic field emission theory.     

Novel synthesis of organic nanowires and their optical properties

Aligned nanowires of organic luminescent material were prepared by introducing the organic luminants into nanochannels of variable size in an anodic aluminum oxide (AAO) membrane, and the emission spectra from these nanowire arrays exhibited novel size-dependent luminescent properties.     

溶剂热法制备MWNTs/CdS复合材料

分别以醋酸镉和硫脲为原料,二乙三胺和去离子水为混合溶剂,采用溶剂热技术制备了MwNTs/CdS复合材料,并用TEM、XRD、FT-IR及UV-vis等技术对材料的结构、形貌和性质进行表征.研究结果表明:硫化镉纳米粒子附着在多壁碳纳米管表面,且无团聚现象.     

Solvothermal synthesis of well-dispersed NaMgF3 nanocrystals and their optical properties

Complex metal fluoride NaMgF(3) nanocrystals were successfully synthesized via a solvothermal method at a relatively low temperature with the presence of oleic acid, and characterized by X-ray diffraction (XRD), transmission electron microscopy (TEM), Fourier transform infrared (FT-IR) spectra, photoluminescence (PL) excitation and emission spectra, respectively. In the synthetic process, oleic acid as a surfactant played a crucial role in confining the growth and solubility of the NaMgF(3) nanocrystals. The as-prepared NaMgF(3) nanocrystals have quasi-spherical shape with a narrow distribution. A possible formation mechanism of the nanocrystals was proposed based on the effect of oleic acid. The as-prepared NaMgF(3) nanocrystals are highly crystalline and well-dispersed in cyclohexane to form stable and clear colloidal solutions, which demonstrate a strong emission band centered at 400 nm in photoluminescence (PL) spectra compared with the cyclohexane solvent. The PL properties of the colloidal solutions of the as-prepared nanocrystals can be ascribed to the trap states of surface defects.     

Solvothermal synthesis and photoluminescent properties of ZnS/cyclohexylamine: inorganic-organic hybrid semiconductor nanowires

An inorganic-organic hybrid semiconductor, ZnS/CHA (CHA = cyclohexylamine) nanocomposites was successfully synthesized via a solvothermal method using CHA as solvent, which yielded uniform and ultralong nanowires with widths of 100-1000 nm and lengths of 5-20 microm. Changing the reaction conditions could alter the morphology and optical properties of the nanocomposites. The periodic layer subnanometer structures were identified by high-resolution transmission electron microscopy (HR-TEM) images, with thickness of approximately 2 nm. The composites exhibited a very large blue-shift in their optical absorption edge as well as an exciton excitation band due to a strong quantum confinement effect caused by the internal subnanometer-scale structures. The pure hexagonal wurtzite ZnS nanowires were also obtained by extracting the ZnS/CHA nanocomposites with dimethyl formamide (DMF). In addition, the luminescent properties of exciton and defect-related transitions in different samples of ZnS/CHA were discussed in detail.     

Template synthesis of nanocomposite CdS with nonlinear optical properties

Russian Chemical Bulletin -     

Improving piezoelectric performance of lead-free polymer composites with high aspect ratio BaTiO3 nanowires

Flexible and lead-free piezoelectric nanocomposites were synthesized with BaTiO₃ nanowires (filler) and poly(vinylidene fluoride) (PVDF) (matrix), and the piezoelectric performances of the composites were systematically studied by varying the aspect ratio (AR) and volume fraction of the nanowire and poling time. BaTiO₃ nanowires with AR of 18 were synthesized and incorporated into PVDF to improve the piezoelectric performance of the composites. It was found that high AR significantly increased the dielectric constant up to 64, which is over 800% improvement compared to those from the composites containing spheroid shape BaTiO₃ nanoparticles. In addition, the dielectric constant and piezoelectric coefficient were also enhanced by increasing the concentration of BaTiO₃ nanowires. The piezoelectric coefficient with 50-vol% BaTiO₃ nanowires embedded in PVDF displayed 61 pC/N, which is much higher than nanocomposites with spheroid shape BaTiO₃ nanoparticles as well as comparable to, if not better, other nanoparticle-filled polymer composites. Our results suggest that it is possible to fabricate nanocomposites with proper mechanical and piezoelectric properties by utilizing proper AR fillers.     

Uniform In2S3 octahedron-built microspheres: Bioinspired synthesis and optical properties

Uniform In₂S₃ octahedron-built microspheres were synthesized by using a mild hydrothermal treatment in the presence of L-glutamic acid at 180 °C. The microsphere with an average size of 5 μm was composed of interconnected octahedrons with diameters in the range from 100 to 150 nm. The products were characterized by X-ray diffraction (XRD), field emission scanning electron microscopy (FESEM), transmission electron microscopy (TEM), selected area electron diffraction (SAED), and X-ray photoelectron spectroscopy (XPS). The synthesis of various hollow and solid sphere structures and flower structures was achieved using different amino acids. This is the first report on synthesizing In₂S₃ nanostructures using different amino acids to modulate the morphology of the final products. Primary photoluminescence studies on the prepared In₂S₃ microspheres show promising results.     

Shape-controlled synthesis of polyhedral CdS flowerlike architectures and their optical properties

Fabrication of polyhedral CdS flower-like architectures have been achieved on a large scale through a mixed solvothermal method. The obtained CdS are characterized by X-ray diffraction, field-emission scanning electron microscopy and transmission electron microscopy, and the results indicate that the CdS flower-like architectures with diameters of 1.5–2.0 µm are hexagonal wurtzite phase and are assembled by some pyramids with the bottom side length of about 440 nm, which have some crystallographic faces. A series of relevant experiments through altering experimental parameters, indicate that the temperature, starting materials and solvent play key roles for the shape evolution of CdS flower-like architectures. The studies of optical properties for polyhedral CdS flower-like architectures indicate that the UV-vis spectroscopy shows a blue-shift absorption peak at 500 nm compared to that of bulk CdS, the photoluminescence spectroscopy shows an emission peak at 640 nm and another strong emission peak at 695 nm, which are believed to be attributed to excitonic emission and deep levels.