Polarization phase-shifting Jamin shearing interferometer

The Jamin shearing interferometer is very useful in wavefront testing, especially for the low coherent light. Based on this interferometer, a polarization phase-shifting Jamin shearing interferometer is proposed to improve the performance. In the interferometer, two interference beams are linearly polarized and a polarization phase shifter is applied to realize the phase shifting. Different types of configurations of the interferometer are given. With phase-shifting interferograms, the precision of the interferometer can be improved. The interferometer is kept as an equal optical path system and its shearing amount remains changeable with simple structure and easy operation. In experiments, phase-shifting interferograms are obtained by rotating the analyzer. The usefulness of the interferometer is verified.     

Test of a conical lens using a two-beam shearing interferometer

We describe a two-beam shearing interferometric technique for testing refractive conical lenses. The optical configuration requires two mutually coherent plane wave fronts transmitted through the conical lens under test. The method can also be considered as an interferometric fringe projection technique in which a fringe pattern produced by the two interfering wave fronts is projected through the optical elements. We describe the principle of the method and present application of the technique for determining the angle formed by the flat surface and the conical surface of a refractive conical lens.     

横向剪切可变的双焦距波带板干涉仪

本文提出了一种应用双焦距波带板做为横向剪切元件的干涉仪,适用于检测会聚波面像差。它结构简单,不仅具有Ronchi光栅检测的优点,而且条纹对比度好,可根据需要改变剪切量,不需要更换波带板。这种干涉仪可由在波带板平面内移动波带板,获得待测波面任意方向的剪切干涉图。双焦距波带板可用全息方法很容易制作。文中给出了实验结果。     

用离焦4f差分干涉仪测量等离子体壳层电子密度

 将环型横向剪切干涉仪置于两个镜头之间,由此设计出一种新型的离焦4f差分干涉仪,该干涉仪同时具有分离光路的剪切量和条纹空间频率分别可调的优点以及共光路结构的稳定性和易于调节的优点,使得在测量大密度梯度等离子体的密度分布时,可以在不降低空间分辨率的条件下仍保证干涉条纹可读。在DPF装置上进行了实验,获得了等离子体壳层的干涉图样,计算了等离子体的径向电子密度分布,在内电极端面上方测量到的最高电子密度约为1.2×10¹⁹ cm^-3,外围等离子体壳层的电子密度约为2×10¹⁸ cm^-3。     

有偏压中心对称光折变晶体中的屏蔽孤子

给出了中心对称光折变晶体中屏蔽孤子的高阶空间电荷场.当高阶项可以忽略时,这个电荷场就变为早前在中心对称光折变晶体中研究的屏蔽孤子的空间电荷场.研究了中心对称光折变晶体中屏蔽孤子的高阶非线性波动方程.在适当的条件下,这个非线性波动方程能够展示明暗空间光孤子.这类晶体不同于非中心对称晶体,其非线性折射率的改变来源于二次电光效应,而不是一般的线性电光效应.应用光束传播的方法,对这些孤子的稳定性进行了讨论.表明在小的微扰下这类孤子是稳定的,不会发生分裂.     

正交偏振180°旋转剪切干涉仪及其应用

本文报道了一台正交偏振180°旋转剪切干涉仪的工作原理和性质,并把它应用于透镜几何偏心量.轴外非对称波像差等方面的定量检测,显示了独特的功能和极高的灵敏度.     

基于光子晶体马赫-曾德尔干涉仪的太赫兹开关及强度调制器

通过对二维正方晶格光子晶体线缺陷模色散曲线慢光特性的研究, 利用外电场对液晶分子取向的调控作用, 在填充液晶的正方晶格波导的马赫-曾德尔干涉仪结构中实现了开关和强度调制等功能. 利用平面波展开法计算了光子晶体波导的线缺陷模, 分析了液晶折射率的变化对缺陷模的影响. 计算表明, 液晶折射率仅改变了0.1, 线缺陷模有效折射率改变达0.168, 该特性可以更为有效地实现对相位的控制, 进而实现高消光比开关和强度调制功能, 这种高效的相位调节器件在集成光系统中将有很好的应用前景.     

支化聚甲基苯基硅烷薄膜波导的光折变效应研究

掺入0.33%苯基三氯硅烷制备了分子量为51 874的支化聚甲基苯基硅烷,由此改善了聚甲基苯基硅烷薄膜波导的成膜质量.报告了相应的成膜技术、膜厚控制技术、热处理技术和热氧化现象.采用紫外曝光手段研究了支化聚甲基苯基硅烷薄膜的光漂白效应,定性测试了曝光剂量与反应生成硅氧烷的正比关系.实验归纳了支化聚甲基苯基硅烷薄膜的光折变规律,获得了控制薄膜厚度和折射率的定量条件.     

基于径向剪切干涉仪的三维位移测量技术

本文提出一种基于双圆光栅径向剪切干涉仪的三维位移测量方法,其测量原理是径向剪切干涉仪所形成的莫尔条纹不仅由二维平面内位移决定,轴向位移会在+1和–1级莫尔条纹之间产生一个特定的相移.首先,基于标量衍射理论对双圆光栅径向剪切干涉仪的+1和–1级莫尔条纹强度分布进行推导,建立了三维位移量与莫尔条纹强度分布的精确解析关系;其...     

A simple electronic speckle shearing interferometer

A new speckle shearing interferometer with simple setup is proposed. The interferometer can be converted easily from a speckle referenced speckle pattern interferometer into a speckle shearing interferometer and vice versa. A beamsplitter and a mirror are used to generate the shear. The amount of shear can be adjusted by simply rotating the mirror. The costs involved are low and it is particularly useful for fast inspection in non-destructive testing of structural integrity. Both the theoretical studies of the method of measurement and the experimental results are presented.     

偏振控制的Ce:KNSBN类光纤光折变光开关

在Ce:KNSBN光折变类光纤晶体中,用不同偏振的读出光控制衍射光强的大小从而实现光折变光开关的开－关功能.实验结果表明e光读出时的光栅衍射效率是o光读出的310倍,而且衍射效率比不随写入光光强比的变化而变化.与块状晶体做了比较,并用理论进行了分析,在光折变类光纤中的衍射效率比是块状晶体的10倍,光折变类光纤晶体有着更好的光开关性能.     

Design and fabrication of a variable frequency grating and its application as a lateral-shear interferometer having a variable shear

The design and fabrication of holographic gratings of frequency variable from 50 to 750 lines/mm over length of 75 mm have been described. An application of these variable frequency gratings as a lateral-shear interferometer has also been suggested. The variable shear interferometer is found to be useful for testing of lenses with a maximum sensitivity in the detection of wavefront aberrations. Comparison of single-frequency grating having uniform pitch of 100 lines/mm with a grating of frequency variable from 59 to 220 lines/mm using an average pitch of 100 lines/mm over a small area as a lateral-shear interferometer have been made. Our experimental observations show that a small area of average pitch of 100 lines/mm on the grating having a variable frequency of 59–220 lines/mm over a distance of 75 mm behaves as a lateral-shear interferometer in the same way as any area of pitch of 100 lines/mm on the grating of uniform pitch of 100 lines/mm.     

Performance evaluation of a wave-front displacement system for vectorial shearing interferometer

We describe a wave-front displacement system using a novel configuration of a pair of wedge prisms. The wave-front propagation, through the displacement system, is analyzed using the exact ray trace. The main advantage, of this configuration, is that the shearing (direction and magnitude) is constant from the displacement system to the image plane. The direction of the shearing depends on the relative orientation of the prisms. The magnitude of the shearing is proportional to the distance between prisms. The proportionality constant depends on the wedge angle and the material of fabrication of the prisms, and it gives the sensitivity to the displacement of the system. The deviation of the shearing due to the difference between the wedge angles is larger than that the produced by the oblique incidence of the wave-front. The experimental results confirm the theoretical data.     

基于光子晶体自准直和带隙效应的马赫-曾德尔干涉仪设计

结合能带图和等频图分析,基于光子晶体自准直和光子带隙效应,设计了一种紧凑、高效的全光子晶体马赫-曾德尔(MZ)干涉仪.相应的光分束器和反射镜均由缺陷结构的光子晶体实现.讨论了干涉仪的输出机理,并与时域有限差分法(FDTD)模拟结果进行了比较.结果分析表明可以把MZ干涉仪作为一种气体、液体微型探测器.可在集成光学中起到重要的作用. 关键词： 光子晶体 自准直 MZ干涉仪     

Tilting and shearing determination in the alignment of a Mach-Zehnder interferometer by zone plates

An easy and accurate method to detect the kind of disarrangement and its magnitude in the adjustment process of a Mach-Zehnder interfermeter by means of an equilateral hyperbolic zone plate is explained.     

基于窗口傅里叶变换剪切干涉法波前检测

提出了一种利用二维窗口傅里叶变换从径向剪切干涉条纹中准确得到波前的重建技术。首先对剪切干涉条纹做二维窗口傅里叶变换,设置阈值和频率积分范围后,进行二维窗口傅里叶逆变换,然后对包裹相位做去载频和相位展开处理得到相位差分布,最后使用波前迭代算法从相位差中复原实际波前。模拟计算表明,使用该方法最大相位复原误差为0.82%,均方根值为0.020 9 rad,实验结果验证了该方法的有效性。同时也对窗口傅里叶变换的关键参数,如窗函数的选择、窗口大小的确定以及阈值的选取等进行了简要讨论。与传统傅里叶变换法(FFT)相比,基于窗口傅里叶变换的剪切干涉波前检测法有更高的精度和稳定性,为波前检测提供一种新的处理方法。     

Analysis of the common characteristics of the Hartmann,Ronchi, and Shack–Hartmann tests

An overview of the settings of the planes for the filters and observed patterns in the Hartmann and Ronchi tests is presented. Also a new set of filters for both test were developed. In a similar way, it is easy to extend this analysis to the Shack–Hartmann test, and to propose a new Null Shack–Hartmann filter.     

On the data rate extension of semiconductor optical amplifier-based ultrafast nonlinear interferometer in dual rail switching mode using a cascaded optical delay interferometer

The feasibility of increasing by a factor of two the data speed of the semiconductor optical amplifier (SOA)-based ultrafast nonlinear interferometer in dual rail switching mode by means of a cascaded optical delay interferometer (ODI) is explored and shown through numerical simulation. From the theoretical analysis it has been found that such extension cannot be done without employing this passive element for any selection of the critical parameters but the SOA carrier lifetime, for which the requirements are yet very demanding. If, however, the time delay introduced by the ODI is adjusted to almost 1/3rd of the bit period, then the result of Boolean XOR operation can be improved for a specified range of parameter values, which can be further selected to be more relaxed than is possible when the ODI is not being used. The use of the ODI allows both error-free and pattern-free performance at the output of the interferometric structure configured as ultrafast XOR gate. In this manner the scheme can offer a practical alternative solution for extending the operating rate of this logical module and enabling its exploitation as a basic building unit in more sophisticated all-optical circuits and subsystems.     

基于窗口傅里叶变换剪切干涉法波前检测

提出了一种利用二维窗口傅里叶变换从径向剪切干涉条纹中准确得到波前的重建技术。首先对剪切干涉条纹做二维窗口傅里叶变换,设置阈值和频率积分范围后,进行二维窗口傅里叶逆变换,然后对包裹相位做去载频和相位展开处理得到相位差分布,最后使用波前迭代算法从相位差中复原实际波前。模拟计算表明,使用该方法最大相位复原误差为0.82%,均方根值为0.020 9 rad,实验结果验证了该方法的有效性。同时也对窗口傅里叶变换的关键参数,如窗函数的选择、窗口大小的确定以及阈值的选取等进行了简要讨论。与传统傅里叶变换法(FFT)相比,基于窗口傅里叶变换的剪切干涉波前检测法有更高的精度和稳定性,为波前检测提供一种新的处理方法。     

Photorefractive dynamic holographic polariscope

In the present communication we show a real time holographic polariscope. The system is based on the dynamic anisotropic diffraction properties that happen in cubic photorefractive crystals of the sillenite family. This result represents a promising technique for possible mechanical strain and stress analysis for scientific and technical applications.