流动注射化学发光法测定甲氨蝶呤

研究了甲醛增强高锰酸钾与甲氨蝶呤的化学发光反应，由此建立了一种测定甲氨蝶呤的流动性注射化学发光分析法，方法的检出限为３．４×１０＾－９ｇ／ｍＬ，相对标准偏差为１．１％（２．０×１０＾－６ｇ／ｍＬ甲氨蝶呤，ｎ＝１１）线性范围为１．０×１０＾－８～１．０×１０＾－５ｇ／ｍＬ。该法已用于甲氨蝶呤针剂及片剂中甲氨蝶呤含量的测定。     

测定钴的化学发光新体系

研究了新吖啶衍生物９，１０－二甲基吖啶氟磺酸盐的化学发光特性。建立了测定Ｃｏ６２＋的化学发光新体系。方法线性范围为１．０×１０＾－１０－１．０×１０＾－７ｇ／ｍＬ；检测限为５．０×１０＾－１１ｇ／ｍＬＣｏ＾２＋。测定５．０×１０＾－９ｇ／ｍＬＣｏ６２＋的相对标准偏差为６．０％。方法选择性好，用于自来水，江水，池塘水中痕量钴的测定，结果令人满意。     

高锰酸钾-亚硫酸钠-核黄素化学发光体系的研究

研究了核黄素在酸性条件下与高锰酸钾和亚硫酸钠发生化学发光反应的行为,建立了流动注射化学发光测定核黄素的新方法。核黄素浓度在１．０×１０＾－７－１．０×１０＾－５ｇ／ｍＬ范围内与化学发光强度呈良好的线性关系,检出限为３×１０＾－８ｇ／ｍＬ。对４．。０×１０＾－７ｇ／ｍＬ的核黄素进行１１次平行测定,得方法的相对标准偏差为１．６％。     

流动注射化学发光法测定安痛定注射液中的氨基比林

在甲醛存在下,高锰酸钾与氨基比林能够发生化学发光反应,产生很强的化学发光,由此建立一种测定氨基比林的流动注射化学发光分析法。方法的检出限为３．０×１０－８ｇ／ｍＬ,相对标准偏差为１．３％（４．０×１０－５ｇ／ｍＬ氨基比林,ｎ＝１１）,线性范围为１．０×１０－７～８．０×１０－５ｇ／ｍＬ氨基比林。该法已用于安痛定注射液中氨基比林含量的测定。     

新化学发光试剂ITCI的合成及其性能研究

合成一种新化学发光试剂异硫氰酸异鲁米诺（ＩＴＣＩ），研究其化学发光及标记酵母ＲＮＡ的性能。标记反应条件温和快速，１克酵母ＲＮＡ可与１．５×１０－５ｍｏｌＩＴＣＩ结合。建立了测定ＩＴＣＩ和ＲＮＡ的化学发光分析方法，线性范围分别为１．０×１０－１０～１．０×１０－７ｍｏｌ／Ｌ和４．０～×１０－９～２．０×１０－７ｇ／ｍＬ，检测限分别为６．６×１０－１１ｍｏｌ／Ｌ和８．０×１０－１０ｇ／ｍＬ。     

空气中肼的流动注射化学发光分析

研究了肼在碱性条件下与鲁米诺和高磺酸钾产生化学发光行为，建立了流动注射化学发光测定痕量肼的新方法。肼的浓度在１．０×１０＾－８－１．０×１０＾－６ｇ／ｍＬ范围内与化学光强度成线性关系；检出限为４×１０＾－９ｇ／ｍＬ；相对标准偏差小于３％。     

偶合反应化学发光法测定痕量银的研究——K4Fe（CN）6—Luminol体系

将Ａｇ（Ｉ）催化Ｋ４Ｆｅ（ＣＮ）６的水合反应与Ｌｕｍｉｎｏｌ同Ｃｕ（ＣＮ）＾２－４的化学发光反应相偶合，建立起一种新的灵敏测定痕量银的化学发光分析法，在所研究的优化条件下，该法测定银的选择性较好，检测限达到４．０×１０＾－１３ｇ／ｍＬＡｇ线性浓度范围为１．０×１０＾－１２～１．０×１０＾－６ｇ／ｍＬＡｇ对４×１０＾－１１ｇ／ｍＬＡｇ（Ｉ）溶液连续１１次测定的ＲＳＤ≤３．５％，用于环境水和岩矿中银的     

流动注射化学发光法测定尿酸

在碱性条件下,铁氰化钾氧化鲁米诺,产生化学发光,尿酸对该体系的化学发光有显著的增强作用（亚铁氰化钾存在时）。基于此,建立了一种直接测定尿酸的流动注射化学发光分析法。方法的线性范围为２．０×１０－８～５．０×１０－６　ｇ／ｍＬ;检测限（３σ）为６．７×１０－９　ｇ／ｍＬ;相对标准偏差为１．１％（尿酸１．０×１０－７　ｇ／ｍＬ,ｎ＝１１）。用于血清及尿样中尿酸的分析,结果令人满意。     

流动注射化学发光法测定痕量硫

基于硫离子对鲁米诺－过氧化氢化学发光反应的增敏作用,建立了测定痕量硫的流动注射化学发光反应的增敏作用,建立了测定痕量硫的流动注射化学发光的新方法。该方法的线性范围为２．０×１０－９～８．０×１０－７ｇ／ｍＬ,检出限为５．６×１０－１０ｇ／ｍＬ,相对标准偏差小于５％（１．０×１０－７ｇ／ｍＬＳ２－,ｎ＝１１）。方法简单,快速,灵敏,已用于环境水样中痕量硫的测定。     

流动注射化学发光法测定吡哌酸

采用流动注射技术，研究了高锰酸钾－亚硫酸钠－吡哌酸体系的化学发光行为，对影响化学发光强度的诸因素进行了实验和探讨，建立了化学发光法测定吡哌酸的新方法。方法的检出限为３×１０~（－８）ｇ／ｍＬ；线性范围为１．０×１０~（－７）～８０×１０~（－５）ｇ／ｍＬ。对４．０×１０～（－６）ｇ／ｍＬ的吡哌酸进行１１次平行测定，得方法的相对标准偏差为１．６％。方法用于药剂中吡哌酸含量的测定，结果与分光光度法测得值一致。     

二氧化碳和丙烯直接合成甲基丙烯酸的NiPMo/TiO2催化剂的研究

用溶胶-凝胶法以磷钼酸(MPA)的镍盐溶液水解钛酸四丁酯制备了NiPMo/TiO2催化剂.使用ICP、 XRD、 TG-DTA、 IR、 TPD-MS和微反应技术研究了催化剂的化学组成、热稳定性、化学吸附性质和催化反应性能.杂多钼酸盐与TiO2通过O2-在TiO2表面发生了键合.在623 K下,杂多阴离子仍保持原有的Keggin结构.CO2在Lewis酸位Ni(Ⅱ)和Lewis碱位Ni-O-Mo的桥氧协同作用下生成CO2卧式吸附态Ni(Ⅱ)←O-(CO)←(O--Ni).丙烯有多种吸附态在催化剂上吸附.在563 K、 1 MPa和空速1500 h-1的反应条件下,丙烯的摩尔转化率为3.2%,产物MAA选择性为95%.     

CoFe2O4自形成磁性液体场致结构化对磁化的影响

The Langevin paramagnetic theory can’t describe the relation between magnetization of ferrofluids and applied magnetic field. The structuralization of ferrofluids, which is considered the main influence factor of the magnetization, is regarded. The part of magnetization works is deposited when the structure is forming. This action influences the magnetization of ferrofluids directly or indirectly. On the base of the “compressing” model, the Langevin function that usually describes the magnetization of ferrofluid is modified, and a well-fitted curve is obtained. An equation of the relation between the equivalent volume fraction after being “compressed” and the intensity of magnetic field is discovered, which approximately describes the process of magnetization. The relation between the approximate initial susceptibility and the volume fraction can be obtained from modified formula.     

Highly regioselective Buchwald–Hartwig amination at C-2 of 2,4-dichloropyridine enabling a novel approach to 2,4-bisanilinopyridine (BAPyd) libraries

The highly regioselective Buchwald–Hartwig amination at C-2 of the cheap and readily accessible reagent, 2,4-dichloropyridine with a range of anilines and heterocyclic amines is described. This new methodology is robust and provides a facile access to 4-chloro-N-phenylpyridin-2-amines on 0.25 mol scale. These intermediates undergo a further Buchwald–Hartwig amination at higher temperature to enable rapid exploration of the chemical space at C-4 and to provide a library of 2,4-bisaminopyridines.     

Sulfur-directed metal-free and regiospecific methyl C(sp3)–H imidation of thioanisoles

Regiospecific and direct imidation of the methyl C(sp³)–H bond of thioanisoles is realized under mild and metal-free conditions with N-fluorobis(benzenesulfonyl)imide as an oxidant and nitrogen source. Proposed mechanism suggests that thionium ion intermediates and a Pummerer-type reaction are involved. The imidation has advantages such as high step-economy, excellent functionality tolerance, and regiospecificity, giving structurally diverse imidation products.     

Selective syntheses of 2H-1,3-oxazines and 1H-pyrrol-3(2H)-ones via temperature-dependent Rh(II)-carbenoid-mediated 2H-azirine-ring expansion

The Rh(II)-catalyzed reaction of 2-carbonyl-substituted 2H-azirines with ethyl 2-cyano-2-diazoacetate or 2-diazo-3,3,3-trifluoropropionate provides an easy access to 2H-1,3-oxazines and 1H-pyrrol-3(2H)-ones. These compounds can be selectively prepared from the same starting material using temperature as the only varied parameter. The 2-azabuta-1,3-diene intermediate, a common precursor for both heterocyclic products, isomerizes into 2H-1,3-oxazine under kinetic control, while 1H-pyrrol-3(2H)-one is the sole product of the reaction at elevated temperatures. According to DFT-calculations a one-atom oxazine ring contraction involving ring-opening to a 2-azabuta-1,3-diene intermediate, followed by a 1,5- and 1,2-prototropic shift leads to the consecutive formation of imidoylketene and azomethine ylide, which then further undergo cyclization to the pyrrole derivative.     

Copper catalyzed/mediated synthetic methodology for ebselen and related isoselenazolones

Scope of the copper catalyzed/mediated selenium-nitrogen coupling reaction has been studied for the synthesis of isoselenazolones. It is noticed that the 2-chloro, 2-bromo-, and 2-iodo-aryl amides substrates can be exploited in the selenium-nitrogen coupling reaction by employing 25-100 mol % of CuI/1,10-phenanthroline (L) and potassium carbonate as a base in DMF. Furthermore, electron rich 2-chloro-arylamides also underwent selenium-nitrogen coupling reaction to give biologically important selenium-nitrogen heterocycles. Also, copper-catalyzed selenium-nitrogen coupling reaction has been meticulously applied for the synthesis of diaryl diselenides having methoxy, amine, and amide functionality from respective aryl iodides in the presence of stoichiometric amount of succinimide as an external Se-N coupling partner.     

Knoevenagel condensation catalyzed by novel Nmm-based ionic liquids in water

A series of novel N-methyl morpholine (Nmm) based ionic liquids with 1,2-propanediol group were synthesized and used as catalysts for Knoevenagel condensation at room temperature in water. Under the effect of the catalyst, various aldehydes or aliphatic ketones could react with a wide range of activated methylene compounds well, including malononitrile, alkyl cyanoacetate, cyanoacetamide, β-diketone, barbituric acid, 2-arylacetonitrile and thiazolidinedione. Furthermore, most of the products could be separated just by filtrating and washing with water. Additionally, the catalyst is recyclable and applicable for the large-scale synthesis.     

Construction of polyheterocyclic spirotetrahydrothiophene derivatives via sulfa-Michael/aldol cascade reaction

A series of polyheterocyclic spirotetrahydrothiophene derivatives were obtained in moderate to excellent yields via a catalyst-free sulfa-Michael/aldol cascade reaction of chalcones 1 and commercially available 1,4-dithiane-2,5-diol 2 under mild conditions. We also present the first asymmetric sulfa-Michael/aldol cascade reaction of chalcones 1 and commercially available 1,4-dithiane-2,5-diol 2 with moderate to good enantioselectivities catalyzed by readily available chiral phase-transfer catalysts (PTCs).     

Suzuki-Miyaura reactions of the soluble guanylate cyclase inhibitor NS2028: a non-product specific route to C-8 substituted analogues

Both soluble guanylate cyclase (sGC) inhibitors ODQ 1 and NS2028 2 are synthesized via improved protocols. In the former case treating 3,4-dihydroquinoxalin-2(1H)-one oxime 8, which can be prepared in two steps from 1,2-benzenediamine, with 1,1′-carbonyldiimidazole (CDI) gives the dihydro-ODQ 10 that in the presence of KMnO₄ oxidises to give ODQ 1 in an overall yield of 46% starting from 1,2-benzenediamine. In the latter case, the synthesis affords NS2028 2 from 2-amino-4-bromophenol 3 in three steps with an overall yield of 85% and avoids the need for chromatography. Furthermore, Suzuki-Miyaura reaction conditions are described that enable the preparation of 8-aryl and 8-heteroaryl derivatives of NS2028 directly from NS2028 2. Finally, demethylation of the 8-(methoxyphenyl) substituted analogues afforded the 8-(hydroxyphenyl) derivatives 40-42. All new products are fully characterised.