Reactivity studies on Fe(III)-(O2(2-))-Cu(II) compounds: influence of the ligand architecture and copper ligand denticity

Heme-Cu/O2 adducts are of interest in the elucidation of the fundamental metal-O2 chemistry occurring in heme-Cu enzymes which effect reductive O-O cleavage of dioxygen to water. In this report, the chemistry of four heme-peroxo-copper [FeIII-(O22-)-CuII]+ complexes (1-4), varying in their ligand architecture, copper-ligand denticity, or both and thus their structures and physical properties are compared in their reactivity toward CO, PPh3, acids, cobaltocene, and phenols. In 1 and 2, the copper(II) ligand is N4-tetradentate, and the peroxo unit is bound side-on to iron(III) and end-on to the copper(II). In contrast, 3 and 4 contain a N3-tridentate copper(II) ligand, and the peroxo unit is bound side-on to both metal ions. CO "displaces" the peroxo ligand from 2-4 to form reduced CO-FeII and CO-CuI species. PPh3 reacts with 3 and 4 displacing the peroxide ligand from copper, forming (porphyrinate)FeIII-superoxide plus CuI-PPh3 species. Complex 2 does not react with PPh3, and surprisingly, 1 reacts neither with PPh3 nor CO, exhibiting remarkable stability toward these reagents. The behavior of 1 and 2 compared to that of 3 and 4 correlates with the different denticity of the copper ligand (tetra vs tridentate). Complexes 1-4 react with HCl releasing H2O2, demonstrating the basic character of the peroxide ligand. Cobaltocene causes the two-electron reduction of 1-4 giving the corresponding micro-oxo [FeIII-(O2-)-CuII]+ complexes, in contrast to the findings for other heme-peroxo-copper species of different design. With t-butyl-substituted phenols, no reaction occurs with 1-4. The results described here emphasize how ligand design and variations influence and control not only the structure and physical properties but also the reactivity patterns for heme-Cu/O2 adducts. Implications for future investigations of protonated heme/Cu-peroxo complexes, low-spin analogues, and ultimately O-O cleavage chemistry are discussed.     

Heme/Cu/O2 reactivity: change in FeIII-(O2 2-)-CuII unit peroxo binding geometry effected by tridentate copper chelation

A new heme-peroxo-copper complex structural type with mu-eta2:eta2 peroxo ligation has been generated utilizing a heterobinucleating ligand with bis(2-(2-pyridyl)ethyl)amine tridentate chelate for copper. Oxygenation of [(2L)FeIICuI]+ (1) at -80 degrees C in CH2Cl2/6%EtCN, 1 (lambdamax, 426, 530 nm) produces [(2L)FeIII-(O22-)-CuII)]+ (3) (lambdamax, 419, 488, 544, 575 nm). Stopped-flow kinetic/spectroscopic probing reveals that a superoxo complex, [(2L)FeIII-(O2-)...CuI(NCEt)]+ (2) (lambdamax = 544 nm), initially forms, k1 = 5.23 +/- 0.09 x 104 M-1 s-1 (-105 degrees C). Subsequent intramolecular reaction of the copper(I) ion in 2 occurs with k2 = 2.74 +/- 0.04 x 101 s-1 (-105 degrees C), producing 3. Resonance Raman spectroscopy (rR) confirms the peroxo assignment for 3; nu(O-O) = 747 cm-1 (Delta(18O2) = -40 cm-1). In an 16O-18O mixed isotope experiment a single band is observed at 730 cm-1. The low nu(O-O) value and the absence of a splitting of the 730 cm-1 band are indicative of a symmetrical binding of the peroxide group in a side-on mu-eta2:eta2 geometry. This conclusion is supported by X-ray absorption spectroscopy on 3. Copper K-edge EXAFS indicates a five-coordinate metal center: 2 N, 2.028(7) A; 2 O, 1.898(7) A; 1 N, 2.171(12) A. An outer-sphere Fe scatterer is found at 3.62(1) A. The iron center K-edge EXAFS fits to either a five- or six-coordinate metal center: 4 N(pyrrole), approximately 2.1 A; 1,2 O, approximately 1.9 A. A preedge feature (Fe(1s) --> Fe(3d) transition) at 7113.2(2) eV resembles that obtained for a eta2-peroxo ferric heme complex, being weaker and at approximately 1.5 eV lower energy than those found in five-coordinate (P)FeIII-X (in C4v symmetry) complexes. Arguments based on rR properties of relevant peroxo compounds also effectively point to the copper(II) ion in 3 as being side-on bound, leading to the very low O-O stretching frequency observed in comparison to those of heme-peroxo species or heme-peroxo-copper complexes with a tetradentate copper chelate. These investigations derive from interest in establishing relevant and/or fundamental O2 chemistry at heme-copper centers, in relation to heme-copper oxidase active-site chemistry.     

An iron-peroxo porphyrin complex: new synthesis and reactivity toward a Cu(II) complex giving a heme-peroxo-copper adduct

Side-on eta2-peroxo-iron porphyrins are strong nucleophiles. In cytochrome P450-like aromatase and other enzymes, such species are postulated as the active oxidants. In cytochrome c oxidase, hemea3-peroxo, hemea3-hydroperoxo, or hemea3-(mu-peroxo)-copper species are proposed as transient intermediates forming prior to O-O bond cleavage. In this report, we describe (1) a facile method for reduction of a heme-O2 species [(F8TPP)FeIII(O2-)(S)] (2), generating the ferric peroxo porphyrin complex [(F8TPP)FeIII(O22-)]- (3) (UV-vis, THF: lambdamax = 435 (Soret), 540(sh), 561; EPR: g = 8.7, 4.2), and (2) that this can be subsequently reacted with a ligand-copper(II) complex, [CuII(TMPA)-(CH3CN)](ClO4)2 (4), affording a heme-peroxo-copper heterobinuclear compound, [(F8TPP)FeII(O22-)-CuII(TMPA)](ClO4) (5). Generation of [(F8TPP)FeIII(O22-)]- (3) using cobaltocene as a one-electron reductant was monitored by UV-vis, EPR, and 1H NMR spectroscopies. Reaction between 3 and 4 was followed by UV-vis spectroscopy, and the product 5 could be precipitated and characterized. Coordination by copper(II) in 5 makes possible further reduction of the mu-peroxo complex by cobaltocene yielding the mu-oxo analogue, [(F8TPP)FeIII(O2-)-CuII(TMPA)](ClO4) (6).     

Copper(I) and copper(II) complexes possessing cross-linked imidazole-phenol ligands: structures and dioxygen reactivity

Catalytic reduction of O2 to H2O, and coupling to membrane proton translocation, occurs at the heterobinuclear heme a3-CuB active site of cytochrome c oxidase. One of the CuB ligated histidines is cross-linked to a neighboring tyrosine (C-N bond; tyrosine C6 and histidine epsilon-nitrogen), and the protic residue of this cross-linked His-Tyr moiety is proposed to participate as both an electron and a proton donor in the catalytic dioxygen reduction event. To provide insight into the chemistry of such a moiety, we have synthesized and characterized tetra- and tridentate pyridylalkylamine chelate ligands {LN4OR and LN3OR (R = H or Me)}, which include an imidazole-phenol (or anisole) cross-link and their copper(I/II) complexes. [CuI(LN4OH)]B(C6F5)4 (1) reacts with dioxygen at -80 degrees C in THF, forming an unstable trans-mu-1,2-peroxodicopper(II)complex, which subsequently converts to a dimeric copper(II)-phenolate complex [{Cu(LN4O-)}2](B(C6F5)4)2 (5a). The close analogue [CuI(LN4OMe)]B(C6F5)4 (3) binds dioxygen reversibly at -80 degrees C in tetrahydrofuran. Stopped-flow kinetics of the reaction [CuI(LN3OH)]ClO4 (2) with O2 in CH2Cl2 indicate a steady formation of the purple dimeric product [{Cu(LN3O-)}2](ClO4)2 (5b), which has been analyzed in the temperature range from -40 to +20 degrees C, DeltaH = -9.6 (6) kJ mol-1, DeltaS = -168 (2) J mol-1 K-1 (k(-40 degrees C) = 1.05(4) x 106 and k(+20 degrees C) = 4.6(2) x 105 M-2 s-1). The X-ray crystal structures of 1, [CuII(LN3OH)(MeOH)(OClO3-)](ClO4) (4), 5a, and 5b are reported.     

Tridentate copper ligand influences on heme-peroxo-copper formation and properties: reduced, superoxo, and mu-peroxo iron/copper complexes

In cytochrome c oxidase synthetic modeling studies, we recently reported a new mu-eta2:eta2-peroxo binding mode in the heteronuclear heme/copper complex [(2L)Fe(III)-(O2(2-))-CuII]+ (6) which is effected by tridentate copper chelation (J. Am. Chem. Soc. 2004, 126, 12716). To establish fundamental coordination and O2-reactivity chemistry, we have studied and describe here (i) the structure and dioxygen reactivity of the copper-free compound (2L)FeII (1), (ii) detailed spectroscopic properties of 6 in comparisons with those of known mu-eta2:eta1 heme-peroxo-copper complexes, (iii) formation of 6 from the reactions of [(2L)FeIICuI]+ (3) and dioxygen by stopped-flow kinetics, and (iv) reactivities of 6 with CO and PPh3. In the absence of copper, 1 serves as a myoglobin model compound possessing a pyridine-bound five-coordinate iron(II)-porphyrinate which undergoes reversible dioxygen binding. Oxygenation of 3 below -60 degrees C generates the heme-peroxo-copper complex 6 with strong antiferromagnetic coupling between high-spin iron(III) and copper(II) to yield an S = 2 spin system. Stopped-flow kinetics in CH2Cl2/6% EtCN show that dioxygen reacts with iron(II) first to form a heme-superoxide moiety, [(EtCN)(2L)FeIII-(O2-)...CuI(EtCN)]+ (5), which further reacts with Cu(I) to generate 6. Compared to those properties of a known mu-eta2:eta1-heme-peroxo-copper complex, 6 has a significantly diminished resonance Raman nu(O-O) stretching frequency at 747 cm(-1) and distinctive visible absorptions at 485, 541, and 572 nm, all of which seem to be characteristics of a mu-eta2:eta2-heme-peroxo-copper system. Addition of CO or PPh3 to 6 yields a bis-CO adduct of 3 or a PPh(3) adduct of 5, the latter with a remaining FeIII-(O2-) moiety.     

Synthetic models of the active site of cytochrome C oxidase: influence of tridentate or tetradentate copper chelates bearing a His--Tyr linkage mimic on dioxygen adduct formation by heme/Cu complexes

Two synthetic models of the active site of cytochrome c oxidase--[(LN4-OH)CuI-FeII(TMP)]+ (1 a) and [(LN3-OH)CuI-FeII(TMP)]+ (2 a)-have been designed and synthesized. These models each contain a heme and a covalently attached copper moiety supported either by a tetradentate N4-copper chelate or by a tridentate N3-copper chelate including a moiety that acts as a mimic of the crosslinked His-Tyr component of cytochrome c oxidase. Low-temperature oxygenation reactions of these models have been investigated by spectroscopic methods including UV/Vis, resonance Raman, ESI-MS, and EPR spectroscopy. Oxygenation of the tetradentate model 1 a in MeCN and in other solvents produces a low-temperature-stable dioxygen-bridged peroxide [(LN4-OH)CuII-O2-FeIII(TMP)]+ {nuO--O=799 (16O2)/752 cm(-1) (18O2)}, while a heme superoxide species [(TMP)FeIII(O2-)CuIILN3-OH] {nuFe--O2: 576 (16O2)/551 cm(-1) (18O2)} is generated when the tridentate model 2 a is oxygenated in EtCN solution under similar experimental conditions. The coexistence of a heme superoxide species [(TMP)FeIII(O2-)CuIILN3-OH] and a bridged peroxide [(LN3-OH)CuII-O2-FeIII(TMP)]+ species in equal amounts is observed when the oxygenation reaction of 2 a is performed in CH2Cl(2)/7 % EtCN, while the percentage of the peroxide (approximately 70 %) in relation to superoxide (approximately 30 %) increases further when the crosslinked phenol moiety in 2 a is deprotonated to produce the bridged peroxide [(LN3-OH)CuII-O2-FeIII(TMP)]+ {nuO--O: 812 (16O2)/765 cm(-1) (18O2)} as the main dioxygen intermediate. The weak reducibility and decreased O2 reactivity of the tricoordinated CuI site in 2 a are responsible for the solvent-dependent formation of dioxygen adducts. The initial binding of dioxygen to the copper site en route to the formation of a bridged heme-O2-Cu intermediate by model 2 a is suggested and the deprotonated crosslinked His-Tyr moiety might contribute to enhancement of the O2 affinity of the CuI site at an early stage of the dioxygen-binding process.     

Further insights into the spectroscopic properties, electronic structure, and kinetics of formation of the heme-peroxo-copper complex [(F8TPP)FeIII-(O2(2-)-CuII(TMPA)]+

In the further development and understanding of heme-copper O2-reduction chemistry inspired by the active-site chemistry in cytochrome c oxidase, we describe a dioxygen adduct, [(F8TPP)FeIII-(O22-)-CuII(TMPA)](ClO4) (3), formed by addition of O2 to a 1:1 mixture of the porphyrinate-iron(II) complex (F8TPP)FeII (1a) {F8TPP = tetrakis(2,6-difluorophenyl)porphyrinate dianion} and the copper(I) complex [(TMPA)CuI(MeCN)](ClO4) (1b) {TMPA = tris(2-pyridylmethyl)amine}. Complex 3 forms in preference to heme-only or copper-only binuclear products, is remarkably stable {t1/2 (RT; MeCN) approximately 20 min; lambda max = 412 (Soret), 558 nm; EPR silent}, and is formulated as a peroxo complex on the basis of manometry {1a/1b/O2 = 1:1:1}, MALDI-TOF mass spectrometry {16O2, m/z 1239 [(3 + MeCN)+]; 18O2, m/z 1243}, and resonance Raman spectroscopy {nu(O-O) = 808 cm-1; Delta16O2/18O2 = 46 cm-1; Delta16O2/16/18O2 = 23 cm-1}. Consistent with a mu-eta2:eta1 bridging peroxide ligand, two metal-O stretching frequencies are observed {nu(Fe-O) = 533 cm-1, nu(Fe-O-Cu) = 511 cm-1}, and supporting normal coordinate analysis is presented. 2H and 19F NMR spectroscopies reveal that 3 is high-spin {also muB = 5.1 +/- 0.2, Evans method} with downfield-shifted pyrrole and upfield-shifted TMPA resonances, similar to the pattern observed for the structurally characterized mu-oxo complex [(F8TPP)FeIII-O-CuII(TMPA)]+ (4) (known S = 2 system, antiferromagnetically coupled high-spin FeIII and CuII). M?ssbauer spectroscopy exhibits a sharp quadrupole doublet (zero field; delta = 0.57 mm/s, |DeltaEQ| = 1.14 mm/s) for 3, with isomer shift and magnetic field dependence data indicative of a peroxide ligand and S = 2 formulation. Both UV-visible-monitored stopped-flow kinetics and M?ssbauer spectroscopic studies reveal the formation of heme-only superoxide complex (S)(F8TPP)FeIII-(O2-) (2a) (S = solvent molecule) prior to 3. Thermal decomposition of mu-peroxo complex 3 yields mu-oxo complex 4 with concomitant release of approximately 0.5 mol O2 per mol 3. Characterization of the reaction 1a/1b + O2 --> 2 --> 3 --> 4, presented here, advances our understanding and provides new insights to heme/Cu dioxygen-binding and reduction.     

Thioether sulfur oxygenation from O2 or H2O2 reactivity of copper complexes with tridentate N2Sthioether ligands

To model thioether-copper coordination chemistry including oxidative reactivity, such as occurs in the copper monooxygenases peptidylglycine -hydroxylating monooxygenase (PHM) and dopamine beta-hydroxylase (DbetaH), we have synthesized new tridentate N2S ligands LSEP and LSBz [LSEP = methyl(2-phenethylsulfanylpropyl)(2-pyridin-2-ylethyl)amine; LSBz = (2-benzylsulfanylpropyl)methyl(2-pyridin-2-ylethyl)amine)]. Both copper(I) and copper(II) complexes have been prepared, and their respective O2 and H2O2 chemistry has been studied. Under mild conditions, oxygenation of [(LSEP)CuI]+ (1a) and [(LSBz)CuI]+ (2a) leads to ligand sulfoxidation, thus exhibiting copper monooxygenase activity. A copper(II) complex of this sulfoxide ligand product, [(LSOEP)CuII(CH3OH)(OClO3)2], has been structurally characterized, demonstrating Cu-Osulfoxide ligation. The X-ray structure of [(LSEP)CuII(H2O)(OClO3)]+ (1b) and its solution UV-visible spectral properties [S-CuII LMCT band at 365 nm (MeCN solvent); epsilon = 4285 M-1 cm-1] indicate the thioether sulfur atom is bound to the cupric ion in both the solid (CuII-S distance: 2.31 A) and solution states. Reaction of 1b with H2O2 leads to sulfonation via the sulfoxide; excess hydrogen peroxide gives mostly sulfone product. These results may provide some insight into recent reports concerning protein methionine oxidation, showing the potential importance of copper-mediated oxidation processes in certain biological settings.     

Dioxygen reactivity of a copper(I) complex with a N3S thioether chelate; peroxo-dicopper(II) formation including sulfur-ligation

Employing a tetradentate N3S(thioether) ligand, LN3S, dioxygen reactivity of a copper(I) complex, [(LN3S)CuI]+ (1) was examined. In CH2Cl2, acetone (at -80 degrees C), or 2-methyltetrahydrofuran (at -128 degrees C), 1 reacts with O2 producing the end-on bound peroxodicopper(II) complex [{(LN3S)CuII}2(mu-1,2-O2(2-))]2+ (2), the first reported copper-dioxygen adduct with sulfur (thioether) ligation. Its absorption spectrum contains an additional low-energy feature (but not a Cu-S CT band) compared to the previously well-characterized N4 ligand complex, [{(TMPA)CuII}2(mu-1,2-O2(2-))]2+ (3) (TMPA = tris(2-pyridylmethyl)amine). Resonance Raman spectroscopy confirms the peroxo formulation {nu(O-O) = 817 cm-1 (16-18O2 Delta = 46 cm-1) and nu(Cu-O) = 545 cm-1 (16-18O2 Delta = 26 cm-1), in close analogy to that known for 3 {nu(O-O) = 827 cm-1 and nu(Cu-O) = 561 cm-1}. Direct evidence for thioether ligation comes from EXAFS spectroscopy {Cu K-edge; Cu-S = 2.4 A}.     

Reaction of a copper-dioxygen complex with nitrogen monoxide (*NO) leads to a copper(II)-peroxynitrite species

A discrete peroxynitrite-copper(II) complex, [(TMG3tren)CuII(-OONO)]+ (3), has been generated in solution (ESI-MS, m/z = 565.15; tetragonal EPR) by reacting *NO(g) with superoxo complex [(TMG3tren)CuII(O2*-)]+ (2). Complex 3 undergoes a thermal transformation to give CuII-nitrite complex [(TMG3tren)CuII(-ONO)]+ (4) (X-ray) along with ca. 0.5 molar equiv dioxygen. A DFT calculation derived structure with cyclic bidentate k2-O,O'-OONO bound peroxynitrite moiety and dx2-y2 ground state is proposed. Experiments using 18O2 suggest that the adjacent peroxo oxygen atoms in 3 are derived from molecular oxygen. Further, 18O2 containing 3 undergoes O-O bond cleavage to form singly 18-O-labeled 4. The results suggest the viability of biological CuI/O2/(*NO) peroxynitrite formation and chemistry, that is, not coming from free superoxide plus *NO reaction.     

Generation and characterization of [(P)M-(X)-Co(TMPA)]n+ assemblies; P = Porphyrinate, M = FeIII and CoIII, X = O2-, OH-, O2(2-), and TMPA = tris(2-pyridylmethyl)amine

With the established chemistry of bridged [(porphyrinate)FeIII-X-CuII(ligand)]n+ [X = O2- (oxo), OH- (hydroxo), O22- (peroxo)] complexes, we investigated the effect of cobalt ion substitution for copper or copper and iron. Thus, in this report, the generation and characterization of new mu-oxo, micro-hydroxo, and micro-peroxo (micro-X) assemblies of [(porphyrinate)MIII-X-CoII/III(TMPA)]n+ assemblies is described, where M = FeIII or CoIII and TMPA = tris(2-pyridylmethyl)amine. The mu-oxo complex [(F8TPP)FeIII-O-CoII(TMPA)]+ (1, F8TPP = tetrakis(2,6-difluorphenyl)porphyrinate) was isolated by an acid-base self-assembly reaction of a 1:1 mixture of (F8TPP)FeIII-OH and [CoII(TMPA)(MeCN)]2+ upon addition of triethylamine. The crystal structure of 1.2C4H10O proved the presence of an unsupported Fe-O-Co moiety; angleFe-O-Co = 171.6 degrees and d(Fe...Co) = 3.58 A. Complex 1 was further characterized by UV-vis (lambdamax = 437 (Soret) and 557 nm), 1H NMR [delta 40.6 (pyrrole-H), 8.8 and 8.7 (m-phenyl-H), 8.0 (p-phenyl-H), 4.4 (PY-4H), 2.6 (PY-3H), 1.0 (PY-5H), -1.1 (PY-6H), and -2.7 (TMPA-CH2-) ppm], electrospray ionization (ESI) and matrix-assisted laser desorption ionization time-of-flight (MALDI-TOF) mass spectrometric methods, Evans method NMR (microeff = 3.1), and superconducting quantum interference device (SQUID) susceptometry (J = -114 cm-1, S = 1). The micro-hydroxo analogue [(F8TPP)FeIII-(OH)-CoII(TMPA)]+ (2) [UV-vis lambdamax = 567 nm; delta 78 ppm (pyrrole-H); Evans NMR microeff = 3.7] was generated by addition of 1 equiv of triflic acid to 1. The protonation is completely reversible, and 1 is regenerated from 2 by addition of triethylamine. While (F8TPP)FeII/[CoII(TMPA)(MeCN)]2+/O2 chemistry does not lead to a stable micro-peroxo species, a dicobalt micro-peroxo complex [(TPP)CoIII-(O22-)-CoIII(TMPA)]2+ (3, TPP = meso-tetraphenylporphyrinate) forms from a reaction of O2 with a 1:1 mixture of the CoII precursor components at -80 degrees C [UV-vis lambdamax = 435 (Soret), 548, and 583 (weak) nm; silent EPR spectrum; diamagnetic NMR spectrum]. The oxygenation/deoxygenation equilibrium is reversible; warming solutions of 3 releases approximately 1 equiv of O2 and the reduced complexes are reformed.     

H-atom abstraction reaction for organic substrates via mononuclear copper(II)-superoxo species as a model for DbetaM and PHM

Hydrogen atom abstraction reactions have been implicated in oxygenation reactions catalyzed by copper monooxygenases such as peptidylglycine alpha-hydroxylating monooxygenase (PHM) and dopamine beta-monooxygenase (DbetaM). We have investigated mononuclear copper(I) and copper(II) complexes with bis[(6-neopentylamino-2-pyridyl)methyl][(2-pyridyl)methyl]amine (BNPA) as functional models for these enzymes. The reaction of [Cu(II)(bnpa)]2+ with H2O2, affords a quasi-stable mononuclear copper(II)-hydroperoxo complex, [Cu(II)(bnpa)(OOH)]+ (4) which is stabilized by hydrophobic interactions and hydrogen bonds in the vicinity of the copper(II) ion. On the other hand, the reaction of [Cu(I)(bnpa)]+ (1) with O2 generates a trans-mu-1,2-peroxo dicopper(II) complex [Cu(II)2(bnpa)2(O2(2-]2+ (2). Interestingly, the same reactions carried out in the presence of exogenous substrates such as TEMPO-H, produce a mononuclear copper(II)-hydroperoxo complex 4. Under these conditions, the H-atom abstraction reaction proceeds via the mononuclear copper(II)-superoxo intermediate [Cu(II)(bnpa)(O2-)]+ (3), as confirmed from indirect observations using a spin trap reagent. Reactions with several substrates having different bond dissociation energies (BDE) indicate that, under our experimental conditions the H-atom abstraction reaction proceeds for substrates with a weak X-H bond (BDE < 72.6 kcal mol(-1)). These investigations indicate that the copper(II)-hydroperoxo complex is a useful tool for elucidation of H-atom abstraction reaction mechanisms for exogenous substrates. The useful functionality of the complex has been achieved via careful control of experimental conditions and the choice of appropriate ligands for the complex.     

Electronic structure of a low-spin heme/Cu peroxide complex: spin-state and spin-topology contributions to reactivity

This study details the electronic structure of the heme–peroxo–copper adduct {[(F8)Fe(DCHIm)]-O2-[Cu(AN)]}+ (LS(AN)) in which O2(2–) bridges the metals in a μ-1,2 or “end-on” configuration. LS(AN) is generated by addition of coordinating base to the parent complex {[(F8)Fe]-O2-[Cu(AN)]}+ (HS(AN)) in which the O2(2–) bridges the metals in an μ-η2:η2 or “side-on” mode. In addition to the structural change of the O2(2–) bridging geometry, coordination of the base changes the spin state of the heme fragment (from S = 5/2 in HS(AN) to S = 1/2 in LS(AN)) that results in an antiferromagnetically coupled diamagnetic ground state in LS(AN). The strong ligand field of the porphyrin modulates the high-spin to low-spin effect on Fe–peroxo bonding relative to nonheme complexes, which is important in the O–O bond cleavage process. On the basis of DFT calculations, the ground state of LS(AN) is dependent on the Fe–O–O–Cu dihedral angle, wherein acute angles (<~150°) yield an antiferromagnetically coupled electronic structure while more obtuse angles yield a ferromagnetic ground state. LS(AN) is diamagnetic and thus has an antiferromagnetically coupled ground state with a calculated Fe–O–O–Cu dihedral angle of 137°. The nature of the bonding in LS(AN) and the frontier molecular orbitals which lead to this magneto-structural correlation provide insight into possible spin topology contributions to O–O bond cleavage by cytochrome c oxidase.     

An unprecedented copper(I,II)-octacyanotungstate(V) 2-D network: crystal structure and magnetism of [CuII(tren)]{CuI[W(V)(CN)8]} . 1.5H2O

A novel two-dimensional cyanide-bridged polymer [CuII(tren)]{CuI[W(V)(CN)8]} . 1.5H2O (tren = tris(2-aminoethyl)amine) formed via the simultaneous in situ metal-ligand redox reaction of [Cu(tren)(OH2)]2+ and self-assembly with [W(V)(CN)8]3- consists of a {CuI[W(V)(CN)8]} square grid built of CuI centres of tetrahedral geometry coordinatively saturated by CN bridges and [W(V)(CN)8]3- capped by [CuII(tren)]2+ moieties; it exhibits ferromagnetic coupling J1 = +5.8(1) cm(-1) within the CuII-W(V) dinuclear subunits and weak antiferromagnetic coupling J2 = -0.03(1) cm(-1) between them through diamagnetic CuI spacers.     

Contrasting copper-dioxygen chemistry arising from alike tridentate alkyltriamine copper(I) complexes

Copper(I)-dioxygen interactions are of great interest due to their role in biological O2-processing as well as their importance in industrial oxidation processes. We describe here the study of systems which lead to new insights concerning the factors which govern Cu(II)-mu-eta2:eta2 (side-on) peroxo versus Cu(III)-bis-mu-oxo species formation. Drastic differences in O2-reactivity of Cu(I) complexes which differ only by a single -CH3 versus -H substituent on the central amine of the tridentate ligands employed are observed. [Cu(MeAN)]B(C6F5)4 (1) (MeAN = N,N,N',N',N'-pentamethyl-dipropylenetriamine) reacts with O2 at -80 degrees C to form almost exclusively the side-on peroxo complex [{CuII(MeAN)}2(O2)]2+ (3) in CH2Cl2, tetrahydrofuran, acetone, and diethyl ether solvents, as characterized by UV-vis and resonance Raman spectroscopies. In sharp contrast, [Cu(AN)]B(C6F5)4 (2) (AN = 3, 3'-iminobis(N,N-dimethyl-propylamine) can support either Cu2O2 structures in a strongly solvent-dependent manner. Extreme behavior is observed in CH2Cl2 solvent, where 1 reacts with O2 giving 3, while 2 forms exclusively the bis-mu-oxo species [{CuIII(AN)}2(O)2]2+ (4Oxo). Stopped-flow kinetics measurements also reveal significant variations in the oxygenation reactions of 1 versus 2, including the observations that 4Oxo forms much faster than does 3; the former decomposes quickly, while the latter is quite stable at 193 K. The solvent-dependence of the bis-mu-oxo versus side-on peroxo preference observed for 2 is opposite to that reported for other known copper(I) complexes; the factors which may be responsible for the unusual behavior of 1/O2 versus 2/O2 (possibly N-H hydrogen bonding in the AN chemistry) are suggested. The factors which affect bis-mu-oxo versus side-on peroxo formation continue to be of interest.     

A Cu(II)-mediated C-H oxygenation of sterically hindered tripyridine ligands to form triangular Cu(II)3 complexes

Two sterically hindered tris-pyridyl methane ligands, tris(6-methyl-2-pyridyl)methane (L1) and bis(6-methyl-2-pyridyl)pyridylmethane (L2), are newly synthesized. Under aerobic conditions, Ln (n = 1 or 2) reacts with CuX2 (X = Cl or Br), oxygenated at the methine position to LnOH or LnOMe. The former alcoholate ligand creates trinuclear Cu(II) complexes [Cu3(X)(LnO)3](PF6)2 [(X, n) = (Br, 1) 1, (C1, 1) 2, (Br, 2) 3, or (C1, 2) 4] in which the alkoxide oxygen atoms bridge copper centers. The crystal structures of 1-4 are presented along with their magnetic susceptibility data. The weak antiferromagnetic coupling between the Cu(II) centers in this trinuclear arrangement is due to weak interaction of the magnetic orbitals (dz2) which are oriented along three alternate sides in a hexagon of the Cu3O3 core in 1-4. Under anaerobic conditions, L1 reacts with CuBr2 to form a square pyramidal complex [CuL1Br2] (9) with the ligand facially capping. [Cu(Br)2(L1OMe)] (10) was obtained after the suspension of 9 in MeOH was stirred under air for 48 h. In the presence of cyclohexene, 9 is converted to [Cu(Br)(L1)]m (m = 1 or 2) 5 quantitatively to give trans- 1,2-dibromocyclohexane, indicating that Br2 is generated during the reaction. The FAB MS spectrum of [18O]-1 prepared by the reaction of L1 with CuBr2 under 18O2 shows that the ligand of [18O]-1 is L1(18O-.) L1(18OH), L1OCD3, and bis(6-methyl-2-pyridyl) ketone were obtained from reaction of L1 with CuBr2 in CD3OD under 18O2. These results indicate that the origins of the O atom in L1OH and L1OMe are O2 and MeOH, respectively. On the basis of these results, a mechanism of the oxygenation of L1 in the present system will be proposed.     

Crucial role of Cu-S bonding for structural changes accompanying the reversible CuI/CuII transition in an unrestrained Cu(N[symbol: see text]S)2 coordination arrangement. An experimental and DFT study

The structure of reversibly oxidizable [Cu(mmb)2](BF4) with 1-methyl-2-(methylthiomethyl)-1H-benzimidazole (mmb) as bidentate N,S-donor ligand has been determined and compared with that of the copper(II) species [Cu(mmb)2(eta 1-ClO4)](ClO4). In the complex ions of the equilibrium [CuI(mmb)2](+) + ClO4- reversible e- + [CuII(mmb)2-(eta 1-ClO4)]+ the almost linear N-Cu-N backbone is invariant whereas the bonds to the thioether sulfur centers and especially the changing S-Cu-S angle (145.18(5) degrees for the CuII species, 109.33(3) degrees for the CuI form) reflect the metal oxidation state. In contrast to the perchlorate coordinating copper(II) species, [CuI(mmb)2](BF4) contains a cation with a very large vacant site at the metal center, resulting in elliptical channels within the crystal. DFT calculations on [CuI(mb)2]+, [CuII(mb)2]2+, and [CuII(mb)2(OClO3)]+ with mb = 2-methylthiomethyl-1H-benzimidazole confirm the essential role of the metal-sulfur bonds in responding to the reversible CuI/II electron transfer process, even in the absence of electronically stronger interacting thiolate sulfur centers or sophisticated oligodentate ligands.     

A copper(I) oxygenation precursor in the entatic state: two isomers of a copper(I) compound of a rigid tetradentate ligand

Oxygenation of [CuI(L1)(NC-CH3)]+ (L1 = dimethyl 2,4-bis(2-pyridinyl)-3,7-diazabicyclo-[3.3.1]-nonane-9-on-1,5-dicarboxylate) leads to a relatively stable mu-peroxo-dicopper(II) product. The stability of this type of oxygenation product has been shown before to be the result of the square pyramidal geometry of L1; preorganization by a dinucleating ligand has been shown to increase the stability of the mu-peroxo-dicopper(II) compound. The structural data presented here indicate that destabilization of the copper(I) precursor is another important factor. There are two isomers of [CuI(L1)(NCCH3)]+; one is yellow, and the other is red. X-ray crystallography indicates that one pyridinyl donor is not coordinated in the yellow compound and that the red compound is 5-coordinate. In the light of the X-ray structure of the metal-free ligand and that of the corresponding copper(II) compound, it emerges that the ligand cavity is well suited for copper(II), whereas the copper(I) compounds are highly strained. This is supported by 1H NMR spectra of the copper(I) species where a fast dynamic process leads to line broadening and by electrochemical data, which indicate that the copper(II) products are exceptionally stable. Also presented are structural (copper(II)), electrochemical, and spectroscopic data (1H NMR, copper(I)) of the derivative [Cu(L2)(X)]n+ with a methyl substituent at the alpha-carbon atom of the two coordinated pyridinyl groups (L2 = dimethyl 2,4-bis(2-pyridinyl-6-methyl)-3,7-diazabicyclo-[3.3.1]-nonane-9-on-1,5-dicarboxylate). There are two structural forms of [CuII(L2)(X)]n+ (X = NCCH3, Cl), which depend on the steric demand of the fifth donor X. For both, van der Waals repulsion leads to a destabilization of the copper(II) products, and this is also evident from an increase in the reduction potential (-110 mV vs. -477 mV, Ag/AgNO3).     

Molecular-programmed self-assembly of homo- and heterometallic penta- and hexanuclear coordination compounds: synthesis, crystal structures, and magnetic properties of ladder-type CuII2MIIx (M=Cu, Ni; x=3, 4) oxamato complexes with CuII2 metallacyclophane cores

New homo- and heterometallic, hexa- and pentanuclear complexes of formula {[Cu2(mpba)2(H2O)F][Cu(Me5dien)]4}(PF6)(3).5H2O (1), {[Cu2(Me3mpba)2(H2O)2][Cu(Me5dien)]4}(ClO4)(4).12H2O (2), {[Cu2(ppba)2][Cu(Me5dien)]4}(ClO4)4 (3), and [Ni(cyclam)]{[Cu2(mpba)2][Ni(cyclam)]3}(ClO4)(4).6H2O (4) [mpba=1,3-phenylenebis(oxamate), Me3mpba=2,4,6-trimethyl-1,3-phenylenebis(oxamate), ppba=1,4-phenylenebis(oxamate), Me5dien=N,N,N'N' ',N' '-pentamethyldiethylenetriamine, and cyclam=1,4,8,11-tetraazacyclotetradecane] have been synthesized through the use of the "complex-as-ligand/complex-as-metal" strategy. The structures of 1-3 consist of cationic CuII6 entities with an overall [2x2] ladder-type architecture which is made up of two oxamato-bridged CuII3 linear units connected through two m- or p-phenylenediamidate bridges between the two central copper atoms to give a binuclear metallacyclic core of the cyclophane-type. Complex 4 consists of cationic CuII2NiII3 entities with an incomplete [2x2] ladder-type architecture which is made up of oxamato-bridged CuIINiII and CuIINiII2 linear units connected through two m-phenylenediamidate bridges between the two copper atoms to give a binuclear metallacyclophane core. The magnetic properties of 1-3 and 4 have been interpreted according to their distinct "dimer-of-trimers" and "dimer-plus-trimer" structures, respectively, (H=-J(S1A.S3A+S1A.S4A+S2B.S5B+S2B.S6B)-J'S1A.S2B). Complexes 1-4 exhibit moderate to strong antiferromagnetic coupling through the oxamate bridges (-JCu-Cu=81.3-105.9 cm-1; -JCu-Ni=111.6 cm-1) in the trinuclear and/or binuclear units. Within the binuclear metallacyclophane core, a weak to moderate ferromagnetic coupling (J'Cu-Cu=1.7-9.0 cm-1) operates through the double m-phenylenediamidate bridge, while a strong antiferromagnetic coupling (J'Cu-Cu=-120.6 cm-1) is mediated by the double p-phenylenediamidate bridge.     

Alkali-metal-mediated zincation of anisole: synthesis and structures of three instructive ortho-zincated complexes

The new concept of alkali-metal-mediated zincation (AMMZ), formally a zinc-hydrogen exchange reaction but one that requires the participation of an alkali metal, is applied here to the alkyl aryl ether anisole, an important molecule for studying directed ortho-metalation (DoM) chemistry. Treating one molar equivalent of anisole with the lithium dialkyl-TMP zincate reagent [THF.Li(mu-TMP)(mu-tBu)Zn(tBu)] (1) in hexane solution affords the mono-ortho-zincated complex [THF.Li(mu-TMP)(mu-o-C6H4OMe)Zn(tBu)] (2), which establishes that 1 functions as an alkyl base although previously it was regarded as an amido (TMP) base in other DoM applications. Treating two molar equivalents of anisole with 1, and increasing the reaction time, affords the bis-ortho-zincated complex [THF.Li(mu-TMP)(mu-o-C6H4OMe)Zn(o-C6H4OMe)] (3), which establishes that 1 can also function as a dual alkyl base. Omitting THF and rerunning the reaction with one or two molar equivalents of anisole affords [Ph(Me)O.Li(mu-TMP)(mu-o-C6H4OMe)Zn(tBu)] (4), which remarkably contains a combination of neutral and ortho-deprotonated anisole ligands. On isolating crystalline 4 from solution and adding THF, it converts to 2 and then to 3 on further stirring of the solution, as determined by NMR studies. This fact, along with other observations, would suggest that a complex-induced proximity effect does not need to be invoked to explain the observed zincation of anisole. The crystal structures of 2-4 are presented, as are their 1H, 13C, and 7Li NMR spectra recorded in C6D6 solution.